Search NASA⌕ Search

SEARCH · Search NASA

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Stabilization of a Quadrotor With Uncertain Suspended Load Using Sliding Mode Control

The stability and trajectory control of a quadrotor carrying a suspended load with a fixed known mass has been extensively studied in recent years. However, the load mass is not always known beforehand in practical applications. This mass uncertainty brings uncertain disturbances to the quadrotor system, causing existing controllers to have a worse performance or to be collapsed. To improve the quadrotor's stability in this situation, we investigate the impacts of the uncertain load mass on the quadrotor. By comparing the simulation results of two controllers -- the proportional-derivative (PD) controller and the sliding mode controller (SMC) driven by a sliding mode disturbance of observer (SMDO), the quadrotor's performance is verified to be worse as the uncertainty increases. The simulation results also show a controller with stronger robustness against disturbances is better for practical applications.

33 ADVANCED PROPULSION SYSTEMS↗

Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Cobalt (Co)-free ultrahigh-nickel (Ni) layered oxides exhibit a double-edged competitive advantages in reducing the cathode cost and boosting the energy density, promising the sustainable development of batteries for electric vehicles. However, the increased Ni content, resultantly more highly oxidative Ni 4+ , potentially induces severe capacity fading due to the aggravated side reactions, limiting the practical applications. Here, we evaluate the compatibility of two localized high-concentration electrolytes (LHCEs) with LiNi 0.96 Mg 0.02 Ti 0.02 O 2 (NMT) cathode under a high charging voltage of 4.4 V in lithium ion batteries. The LHCE with EC additive enables the formation of stable interfacial layers on both NMT cathode and graphite anode, thus realizing a capacity retention of 97.2% over 200 cycles at 25 °C and high reversible capacities of ~180.2 and ~185.8 mAh g -1 , respectively, at 5C charge rate and 5C discharge rate. This study offers a promising approach to enable Co-free ultrahigh-Ni layered oxides for practical applications.

25 ENERGY STORAGE↗

What you get is not always what you see—pitfalls in solar array assessment using overhead imagery

Effective integration planning for small, distributed solar photovoltaic (PV) arrays into electric power grids requires access to high quality data: the location and power capacity of individual solar PV arrays. Unfortunately, national databases of small-scale solar PV do not exist; those that do are limited in their spatial resolution, typically aggregated up to state or national levels. While several promising approaches for solar PV detection have been published, strategies for evaluating the performance of these models are often highly heterogeneous from study to study. The resulting comparison of these methods for practical applications for energy assessments becomes challenging and may imply that the reported performance evaluations overly optimistic. The heterogeneity comes in many forms, each of which we explore in this work: the degree of diversity of the locations and sensors (e.g. different satellites, aerial photography) from which the training and validation data originate, the validation of ground truth (manual annotation of imagery vs known solar PV locations), the level of spatial aggregation (e.g. array-level vs regional estimates), and inconsistencies in the training and validation datasets (e.g. different datasets are used for each study and those data are not always made accessible). For each, we discuss emerging practices from the literature to address them or suggest directions of future research. As part of our investigation, we evaluate solar PV identification performance in two large regions: the entire state of Connecticut and the city of San Diego, CA. In Connecticut, we also use 33,114 known parcel-level solar PV installations from Berkeley Lab’s Tracking the Sun dataset to evaluate parcel-level performance and evaluate capacity estimates using 169 municipalities. We also make our code (which we call SolarMapper), pre-trained models, training data, and predictions publicly available and provide a web portal for interactively inspecting each prediction that was made. Here our findings suggest that traditional performance evaluation of the automated identification of solar PV from satellite imagery may be optimistic due to common limitations in the validation process. The takeaways from this work are intended to inform and catalyze the large-scale practical application of automated solar PV assessment techniques by energy researchers and professionals.

14 SOLAR ENERGY↗

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

Lithium (Li) metal is an ideal anode material for high energy density batteries. However, its low Coulombic efficiency (CE) and formation of dendrites during the plating and stripping processes has hindered its applications in rechargeable Li metal batteries. The accurate measurement of Li CE is a critical factor to predict the cycle life of Li metal batteries, but the measurement of Li CE is affected by various factors that often leads to conflicting values reported in the literature. Here, we investigate various factors that affect the measurement of Li CE and propose a more accurate method of determining Li CE. It was also found that the capacity used for cycling greatly affects the stabilization cycles and the average CE. A higher cycling capacity leads to a shorter number of stabilization cycles and higher average CE. With a proper high-concentration ether-based electrolyte, Li metal can be cycled with a high average CE of 99.5 % for over 100 cycles at a high capacity of 6 mAh cm-2 suitable for practical applications.

Adams, Brian D.↗

Chemisorption of polysulfides through redox reactions with organic molecules for lithium–sulfur batteries

Lithium-sulfur battery possesses high energy density but suffers from severe capacity fading due to the dissolution of lithium polysulfides. Novel design and mechanisms to encapsulate lithium polysulfides are greatly desired by high-performance lithium-sulfur batteries towards practical applications. Herein, we report a strategy of utilizing anthraquinone, a natural abundant organic molecule, to suppress dissolution and diffusion of polysulfides species through redox reactions during cycling. The keto groups of anthraquinone play a critical role in forming strong Lewis acid-based chemical bonding. This mechanism leads to a long cycling stability of sulfur-based electrodes. With a high sulfur content of ~73%, a low capacity decay of 0.019% per cycle for 300 cycles and retention of 81.7% over 500 cycles at 0.5 C rate can be achieved. Here, this finding and understanding paves an alternative avenue for the future design of sulfur-based cathodes toward the practical application of lithium-sulfur batteries.

25 ENERGY STORAGE↗

Best practices mobile application for D and D KM-IT - 15712

The Deactivation and Decommissioning Knowledge Management Information Tool (D and D KM-IT) is the repository of useful information built specifically for D and D community. The knowledge provided by the D and D KM-IT is the experience and expertise gained by people within the field and fellow employees of the Department of Energy (DOE). This information has been the result of gathering, analyzing, storing, and sharing knowledge to help reduce time spent on discovering previously found data. In order to help in organizing all the data from all the professional contributors, the D and D KM-IT has been divided into 12 different modules. Each individual module pertains to a different area of information for users, such as vendor and technology information, collaboration tools, and even a hotline that contains problems posted by the users. Purpose: - Design and develop the module for the Best Practices on D and D KM-IT mobile platform deployed at https://m.dndkm.org; - The Best Practices mobile module should integrate with existing modules seamlessly; - Use the D and D KM-IT existing database to consume information for the mobile system. jQuery Mobile framework was used to develop Best Practices module for mobile devices. jQuery Mobile framework provides support for responsive web design (RWD). RWD allows adaptation of the layout and user interface of web sites and web apps to different device resolutions, screen densities, and views. UI design was implemented with three fundamental elements: CSS media queries, An adaptable grid, Flexible images and media. Advantages/benefits: - A responsive web design adapts to any-sized screen / resolution and orientation view; - ASP.NET compatible which allows the D and D KM-IT database to support all platforms accessing the system; - Navigating pages is more bandwidth efficient by refreshing data in small section with Ajax instead of reloading the entire page; - Multiple parts of a page can perform different tasks resulting in improved user's experience. Results: - Mobile system is accessible on compatible devices running Android, Apple, Blackberry, Palm, and Windows devices; - Best Practices searches through Characterization, Decontamination, Dismantlement, Material Disposition, and Worker Safety; - Keyword search is enabled for the best practices that are available on both the desktop and mobile systems - Documents are formatted into a PDF file format to ensure compatibility on any device. Conclusion: - Fully integrated with the desktop Best Practices module and displays documents that are uploaded on web platform; - Fast-loading with D and D KM-IT mobile system and downloadable documents; - Responsive design which gives the same user experience when either viewed on smart phone or tablet.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Oxynitrides enabled photoelectrochemical water splitting with over 3,000 hrs stable operation in practical two-electrode configuration

Solar photoelectrochemical reactions have been considered one of the most promising paths for sustainable energy production. To date, however, there has been no demonstration of semiconductor photoelectrodes with long-term stable operation in a two-electrode configuration, which is required for any practical application. Herein, we demonstrate the stable operation of a photocathode comprising Si and GaN, the two most produced semiconductors in the world, for 3,000 hrs without any performance degradation in two-electrode configurations. Measurements in both three- and two-electrode configurations suggest that surfaces of the GaN nanowires on Si photocathode transform in situ into Ga-O-N that drastically enhances hydrogen evolution and remains stable for 3,000 hrs. First principles calculations further revealed that the in-situ Ga-O-N species exhibit atomic-scale surface metallization. This study overcomes the conventional dilemma between efficiency and stability imposed by extrinsic cocatalysts, offering a path for practical application of photoelectrochemical devices and systems for clean energy.

14 SOLAR ENERGY↗

Synthesis of superhydrophobic SiO{sub 2} layers via combination of surface roughness and fluorination

We describe the preparation of superhydrophobic SiO{sub 2} layers through a combination of surface roughness and fluorination. Electrospraying SiO{sub 2} precursor solutions that were prepared by a sol-gel route and included trichloro(1H,1H,2H,2H-perfluorooctyl)silane as a fluorination source produced highly rough, fluorinated SiO{sub 2} layers. In sharp contrast to the fluorinated flat SiO{sub 2} layer, the fluorinated rough SiO{sub 2} layer showed much enhanced repellency toward liquid droplets of different surface tensions. The surface fraction and the work of adhesion of the superhydrophobic SiO{sub 2} layers were determined, respectively, based on Cassie-Baxter and Young-Dupre equations. The satisfactory long-term stability for 30 days, the ultraviolet resistance and the thermal stability up to 400 {sup o}C of the superhydrophobic SiO{sub 2} layers prepared in this work confirm a promising practical application. - Graphical abstract: A schematic illustration of the electrospray deposition used for preparing SiO{sub 2} layers. Shapes of liquid droplets of water, glycerol, coffee, juice and milk created on the fluorinated rough SiO{sub 2} layer deposited on a silicon wafer. Highlights: Black-Right-Pointing-Pointer Superhydrophobic SiO{sub 2} layers are realized by a combination of surface roughness and fluorination. Black-Right-Pointing-Pointer The fluorinated rough SiO{sub 2} layer shows enhanced repellency toward various liquid droplets. Black-Right-Pointing-Pointer The wetting behavior is explained based on Cassie-Baxter and Young-Dupre equations. Black-Right-Pointing-Pointer The superhydrophobic SiO{sub 2} layers confirm a promising practical application.

36 MATERIALS SCIENCE↗

Synthesis and characterization of iron orthophosphate by solution combustion method

Graphical abstract: Display Omitted Highlights: ► Solution combustion synthesis was firstly employed to prepare FePO{sub 4}. ► Pure, well-crystallized and porous FePO{sub 4} was obtained and characterized. ► The results proved SCS a time saving and practically applicable method. -- Abstract: The present work applies solution combustion synthesis (SCS) by employing glycine as organic fuel to stimulate the synthesis of pure iron orthophosphate with well-defined reaction parameters. The structural and morphological properties of the products were characterized and confirmed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and surface analyzer, respectively. Thermal behaviors were also investigated by TG/DT analyses. The optimal condition was set at 500 °C in a few minutes, giving pure iron orthophosphate with a good level of crystallinity and 11,769 m{sup 2}/g surface area. The results proved SCS a time saving and practically applicable method.

36 MATERIALS SCIENCE↗

High Pressure Hydrogen Pressure Relief Devices: Accelerated Life Testing and Application Best Practices

Pressure relief devices (PRDs ) are used to protect high pressure systems from burst failure caused by overpressurization. Codes and standards require the use of PRDs for the safe design of many pressurized systems. These systems require high reliability due to the risks associated with a burst failure. Hydrogen service can increase the risk of PRD failure due to material property degradation caused by hydrogen attack. The National Renewable Energy Laboratory (NREL) has conducted an accelerated life test on a conventional spring loaded PRD. Based on previous failures in the field, the nozzles specific to these PRDs are of particular interest. A nozzle in a PRD is a small part that directs the flow of fluid toward the sealing surface to maintain the open state of the valve once the spring force is overcome. The nozzle in this specific PRD is subjected to the full tensile force of the fluid pressure. These nozzles are made from 440C material, which is a type of hardened steel that is commonly chosen for high pressure applications because of its high strength properties. In a hydrogen environment, however, 440C is considered a worst case material since hydrogen attack results in a loss of almost all ductility and thus 440C is prone to fatigue and material failure. Accordingly, 440C is not recommended for hydrogen service. Conducting an accelerated life test on a PRD with 440C material provides information on necessary and sufficient conditions required to produce crack initiation and failure. The accelerated life test also provides information on other PRD failure modes that are somewhat statistically random in nature.

33 ADVANCED PROPULSION SYSTEMS↗

Immobilization of WO{sub 3} or MoO{sub 3} on macroscopic silica fiber via CNFs template

Graphical abstract: Uniform immobilization of tungsten trioxide (WO{sub 3}) or molybdenum trioxide (MoO{sub 3}) on silica fiber was successfully achieved by using carbon nanofibers (CNFs) as template. FE-SEM coupled with XRD analysis confirmed the template effect and the existence of WO{sub 3} or MoO{sub 3} immobilized on silica fiber. It is expected that such materials with direct macroscopic shapes would hold promise as highly functionalized materials for potential practical applications, especially in photocatalysis. - Highlights: • WO{sub 3} or MoO{sub 3} with macroscopic shapes were successfully obtained. • WO{sub 3} and MoO{sub 3} immobilization depended on CNFs templates. • FE-SEM and XRD confirmed the structure and phase composition. - Abstract: Uniform immobilization of tungsten trioxide (WO{sub 3}) or molybdenum trioxide (MoO{sub 3}) on silica fiber was successfully achieved by using carbon nanofibers (CNFs) as template. Field emission scanning electron microscopy (FE-SEM), coupled with X-ray diffraction (XRD) analysis confirmed the template effect and the existence of WO{sub 3} or MoO{sub 3} immobilized on silica fiber. It is expected that such materials with direct macroscopic shapes would hold promise as highly functionalized materials for potential practical applications, especially in photocatalysis.

36 MATERIALS SCIENCE↗

Simulation of carbon dioxide absorption by amino acids in two-phase batch and bubble column reactors

The absorption of carbon dioxide (CO 2 ) is a critical process in many practical applications. The use of amino acid solutions as absorption solvents has the potential to reduce the amount of energy required by the regeneration process. The goal of this research project is to develop dynamic models to simulate CO 2 absorption by using amino acid solutions as absorption solvents. A reaction scheme is introduced to represent the chemical reactions between the amino acid and CO 2 . Two reaction models, for a two-phase batch reactor and a bubble column, based upon transient mass and energy balances for the chemical species found in CO 2 gas-liquid absorption are presented. Computer codes have been written to implement the proposed models. Simulation results are presented and discussed. The proposed models can be used to optimize and control CO 2 absorption in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing three closed-loop learning algorithms by searching for high-quality quantum control pulses

Designing a high-quality control is crucial for reliable quantum computation. Among the existing approaches, closed-loop leaning control is an effective choice. Its efficiency depends on the learning algorithm employed, thus deserving algorithmic comparisons for its practical applications. Here we assess three representative learning algorithms, including GRadient Ascent Pulse Engineering (GRAPE), improved Nelder-Mead (NMplus), and Differential Evolution (DE), by searching for high-quality control pulses to prepare the Bell state. We first implement each algorithm experimentally in a nuclear magnetic resonance system and then conduct a numerical study considering the impact of some possible significant experimental uncertainties. The experiments report the successful preparation of the high-fidelity target state by the three algorithms, while NMplus converges fastest, and these results coincide with the numerical simulations when potential uncertainties are negligible. However, under certain significant uncertainties, these algorithms possess distinct performance with respect to their resulting precision and efficiency, and DE shows the best robustness. Finally, this study provides insight to aid in the practical application of different closed-loop learning algorithms in realistic physical scenarios.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Cyclability of Lithium-Oxygen Batteries with Electrodes Protected by Surface Films Induced via In Situ Electrochemical Process

Although the rechargeable lithium-oxygen (Li-O2) batteries have extremely high theoretical specific energy, the practical application of these batteries is still limited by the instability of their carbon-based air-electrode, Li metal anode, and electrolytes towards reduced oxygen species. Here we demonstrate a simple one-step in-situ electrochemical pre-charging strategy to generate thin protective films on both carbon nanotubes (CNTs) air-electrode and Li metal anode simultaneously under an inert atmosphere. Li-O2 cells after such pre-treatment demonstrate significantly extended cycle life of 110 and 180 cycles under the capacity-limited protocol of 1000 mAh g-1 and 500 mAh g-1, respectively, which is far more than those without pre-treatment. The thin-films formed from decomposition of electrolyte during in-situ electrochemical pre-charging process in an inert environment can protect both CNTs air-electrode and Li metal anode prior to conventional Li-O2 discharge/charge cycling where reactive reduced oxygen species are formed. This work provides a new approach for protections of carbon-based air-electrode and Li metal anode in practical Li-O2 batteries, and may also be applied to other battery systems.

Environmental Molecular Sciences Laboratory↗

Trace-Level, Multi-Gas Detection for Food Quality Assessment Based on Decorated Silicon Transistor Arrays

Multiplexed gas detection at room temperature is critical for practical applications, such as for tracking the complex chemical environments associated with food decomposition and spoilage. Here, an integrated array of multiple silicon-based, chemical-sensitive field effect transistors (CSFETs) is presented to realize selective, sensitive, and simultaneous measurement of gases typically associated with food spoilage. CSFETs decorated with sensing materials based on ruthenium, silver, and silicon oxide are used to obtain stable room-temperature responses to ammonia (NH 3 ), hydrogen sulfide (H 2 S), and humidity, respectively. For example, one multi-CSFET sensor signal changes from its baseline by 13.34 in response to 1 ppm of NH 3 , 724.45 under 1 ppm H 2 S, and 23.46 under 80% relative humidity, with sensitive detection down to 10 ppb of NH 3 and H 2 S. To demonstrate this sensor for practical applications, the CSFET sensor array is combined with a custom-printed circuit board into a compact, fully integrated, and portable system to conduct real-time monitoring of gases generated by decomposing food. By using existing silicon-based manufacturing methodologies, this room-temperature gas sensing array can be fabricated reproducibly and at low cost, making it an attractive platform for ambient gas measurement needed in food safety applications.

36 MATERIALS SCIENCE↗

High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes

Rechargeable lithium metal batteries (LMBs) are regarded as the “holy grail” of energy storage systems, but their practical applications have long been hindered by poor cyclability and severe safety concerns. In this work, we report a nonflammable localized high concentration electrolyte consisting of 1.2 M lithium bis(fluorosulfonyl)imide in a mixture of flame-retarded triethyl phosphate/bis(2,2,2-trifluoroethyl) ether (1:3 by mol) for 4-V class LMBs. This electrolyte enables dendrite-free and stable cycling of lithium metal anode with high CE of up to 99.2%. Moreover, it exhibits excellent anodic stability even at >4.5 V and greatly enhances the cycle performance of LMBs. For example, with this electrolyte, a Li||NMC622 battery shows >97% capacity retention after 600 cycles at 1 C, corresponding to negligible capacity decay of <0.005% per cycle. This novel electrolyte can thus make high-energy LMBs a more safe and viable technique for practical applications.

lithium battery, diluent, localized high concentra↗

Toward highly efficient electrocatalyst for Li–O 2 batteries using biphasic N-doping cobalt@graphene multiple-capsule heterostructures

To promote lithium-oxygen batteries available for practical applications, the development of advanced cathode catalysts with low-cost, high activity and stable structural properties is demanded. Such development is rooted on certain intelligent catalyst-electrode design that fundamentally facilitates electronic and ionic transport, and improves oxygen diffusivity in a porous environment. Here we design a biphasic nitrogen-doped cobalt@graphene multiple-capsule heterostructure, combined with a flexible, stable porous electrode architecture, and apply it as promising cathodes for lithium-oxygen cells. The biphasic nitrogen-doping feature improves the electric conductivity and catalytic activity; the multiple-nanocapsule configuration makes high/uniform electro-active zones possible; furthermore, the colander-like porous electrode facilitates the oxygen diffusion, catalytic reaction, and stable deposition of discharge products. Finally, the electrode exhibits much improved electrocatalytic properties associated with unique morphologies of electrochemically grown lithium peroxides.

25 ENERGY STORAGE↗