Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pressure space”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Landing pressure loads of the 140A/B space shuttle orbiter (model 43-0) determined in the Rockwell International low speed wind tunnel (OA69), volume 1

Wind tunnel tests of a 0.0405 scale model of the -1404A/B configuration of the Space Shuttle Vehicle Orbiter are presented. Pressure loads data were obtained from the orbiter in the landing configuration in the presence of the ground for structural strength analysis. This was accomplished by locating as many as 30 static pressure bugs at various locations on external model surfaces as each configuration was tested. A complete pressure loads survey was generated for each configuration by combining data from all bug locations, and these loads are described for the fuselage, wing, vertical tail, and landing gear doors. Aerodynamic force data was measured by a six component internal strain gage balance. This data was recorded to correct model angles of attack and sideslip for sting and balance deflections and to determine the aerodynamic effects of landing gear extension. All testing was conducted at a Mach number of 0.165 and a Reynolds number of 1.2 million per foot. Photographs of test configurations are shown.

Soard, T. L.↗
NASA NTRS2017

Exploration Pressure Garment

A presentation of the current plan for the development of an exploration space suit pressure garment, beginning with a demonstration unit for the performance of EVA's on the ISS.

Z-2↗
NASA NTRSDate not supplied

Comparison of Physical Workload Across Eva-Simulation Analog Environments: Hybrid Space Suit Simulator and Pressurized Suit Testing

NASA conducts research, testing, and training across a variety of analog environments to support characterization of human performance during Extravehicular Activities (EVAs). Time utilizing pressurized suits in an offloaded environment is both limited and expensive, making it challenging to carry out extensive research with these suits. The Human Physiology, Performance, Protection, and Operations (H-3PO) Laboratory at NASA Johnson Space Center designed a Hybrid Space Suit Simulator (HS3) as a low-cost, workload approximator and easy access research tool to provide relevant physical and cognitive workloads during simulated EVAs. A pilot study was conducted in a 1g analog environment where six healthy subjects (3 male, 3 female) underwent simulated 5-hour EVAs in the HS3. This study used a COSMED K5 portable metabolic analyzer and a Polar H10 heart rate monitor to evaluate physical workload during the EVAs. For direct comparison, EVA tasks and timelines were modeled after a similar study conducted in pressurized suits (Mark-III spacesuit, n=3 male; small xPGS spacesuit, n=3 female) at NASA’s Active Response Gravity Offload System (ARGOS) offloaded to Lunar gravity (1/6 g). The 1g HS3 data demonstrated increased metabolic rate when compared to pressurized, Lunar-offloaded suited simulated EVAs for certain tasks including the kneeling scoop (HS3: 1194±199 BTU/hr, ARGOS: 860±170 BTU/hr, p < 0.05) and 20 lb object relocation (HS3: 1651±136 BTU/hr, ARGOS: 1048±252.8 BTU/hr, p < 0.05), but it did not demonstrate any significant differences in heart rate (p > 0.05). Other simulated EVA tasks, such as a 500 m traverse (HS3: 1431±177 BTU/hr, ARGOS: 1212±294 BTU/hr, p > 0.05), showed similar workload profiles with no significant workload differences between HS3 and ARGOS. The HS3 is a useful research tool for increasing workloads in EVA research without pressurized suits, though it may overestimate workload during certain EVA tasks when used in 1g environments.

Zachary Wusk↗
NASA NTRS1973

Space suit

A pressure suit for high altitude flights, particularly space missions is reported. The suit is designed for astronauts in the Apollo space program and may be worn both inside and outside a space vehicle, as well as on the lunar surface. It comprises an integrated assembly of inner comfort liner, intermediate pressure garment, and outer thermal protective garment with removable helmet, and gloves. The pressure garment comprises an inner convoluted sealing bladder and outer fabric restraint to which are attached a plurality of cable restraint assemblies. It provides versitility in combination with improved sealing and increased mobility for internal pressures suitable for life support in the near vacuum of outer space.

Shepard, L. F.↗
NASA NTRS1983

Prediction of a propellant tank pressure history using state space methods

An analysis of the time response of a propellant supply system operating in the blowdown mode is presented. The supply system is part of a pump-fed propulsion system intended for use on interplanetary spacecraft. As such, the supply system must provide the pump with propellant at sufficient pressure to avoid pump cavitation. The system, consisting of the tank, the liquid propellant, the pressurant gas and propellant vapor mixture, and a film layer separating the liquid and vapor phases, is analyzed using the principles of mass and energy conservation. The resulting set of ordinary, coupled, nonlinear differential equations for the thermodynamic state variables is integrated as an initial value problem. The resulting histories of total pressure, propellant vapor pressure, propellant liquid temperature, film layer temperature, propellant vapor/pressurant gas temperature, propellant vapor mass, and propellant liquid mass enable the calculation of the net positive suction head available at the pump which determines the viability of the pump-fed system concept when operated in the blowdown mode.

Estey, P. N.↗
NASA NTRS1986

A study of boiling heat transfer as applied to the cooling of ball bearings in the high pressure oxygen turbopump of the space shuttle main engine

Two sets of ball bearings support the main shaft within the High Pressure Oxygen Turbopump (HPOTP) in the Space Shuttle Main Engine (SSME). In operation, these bearings are cooled and lubricated with high pressure liquid oxygen (LOX) flowing axially through the bearing assembly. Currently, modifications in the assembly design are being contemplated in order to enhance the lifetime of the bearings and to allow the HPOTP to operate under larger loads. An understanding of the fluid dynamics and heat transfer characteristics of the flowing LOX is necessary for the implementation of these design changes. The proposed computational model of the LOX fluid dynamics, in addition to dealing with a turbulent flow in a complex geometry, must address the complication associated with boiling and two-phase flow. The feasibility of and possible methods for modeling boiling heat transfer are considered. The theory of boiling as pertains to this particular problem is reviewed. Recommendations are given for experiments which would be necessary to establish validity for correlations needed to model boiling.

Schreiber, Will↗
NASA NTRS1989

Twist seal for high-pressure vessels such as space shuttle rocket motors

Seals for sealing clevis and flange joints (14) of a solid rocket booster motor, and more particularly to a seal (30) which is twisted upon application of expansion forces to an edge seal (36). This twisting motion initially causes a leading edge seal (44) to be urged into sealing engagement with a surface (48) of an adjacent member (20) and thereafter, increasing fluid pressure on a pressurized side (64) of a seal (30) drives a broad sealing region (46) into sealing engagement with a surface (48).

von Pragenau, George L.↗
NASA NTRS1993

Development of an infrared absorption transducer to monitor partial pressure of carbon dioxide for space applications

An infrared (IR) carbon dioxide (CO2) transducers has been designed, developed, and produced for space applications. The transducer provides measurement of partial pressure of CO2 in life support applications, including the Extravehicular Mobility Unit (EMU), Space Shuttle Orbiter and Spacehab. The electrochemical sensor presently used for these applications has a slow reponse time and has reliability concerns due to the electrolyte. The new microprocessor based unit has a fast response time and can be tailored to other space applications.

Lutz, Glenn↗
NASA NTRS1991

High-frequency data observations from space shuttle main engine low pressure fuel turbopump discharge duct flex joint tripod failure investigation

Observations made by Marshall Space Flight Center (MSFC) engineers during their participation in the Space Shuttle Main Engine (SSME) low pressure fuel turbopump discharge duct flex joint tripod failure investigation are summarized. New signal processing techniques used by the Component Assessment Branch and the Induced Environments Branch during the failure investigation are described in detail. Moreover, nonlinear correlations between frequently encountered anomalous frequencies found in SSME dynamic data are discussed. A recommendation is made to continue low pressure fuel (LPF) duct testing through laboratory flow simulations and MSFC-managed technology test bed SSME testing.

Zoladz, T. F.↗
NASA NTRS2007

Cryogenic Pressure Control Modeling for Ellipsoidal Space Tanks

A computational fluid dynamics (CFD) model is developed to simulate pressure control of an ellipsoidal-shaped liquid hydrogen tank under external heating in normal gravity. Pressure control is provided by an axial jet thermodynamic vent system (TVS) centered within the vessel that injects cooler liquid into the tank, mixing the contents and reducing tank pressure. The two-phase cryogenic tank model considers liquid hydrogen in its own vapor with liquid density varying with temperature only and a fully compressible ullage. The axisymmetric model is developed using a custom version of the commercially available FLOW-31) software. Quantitative model validation is ,provided by engineering checkout tests performed at Marshall Space Flight Center in 1999 in support of the Solar Thermal Upper Stage_ Technology Demonstrator (STUSTD) program. The engineering checkout tests provide cryogenic tank self-pressurization test data at various heat leaks and tank fill levels. The predicted self-pressurization rates, ullage and liquid temperatures at discrete locations within the STUSTD tank are in good agreement with test data. The work presented here advances current CFD modeling capabilities for cryogenic pressure control and helps develop a low cost CFD-based design process for space hardware.

Lopez, Alfredo↗
NASA NTRS1979

High-pressure protective systems technology

Space suit assemblies developed in the past provide candidate concepts to meet future extravehicular-activity requirements. The paper is concerned with the development of the modular 8-psi Ames AX-3 high-pressure suit assembly on the basis of a review of existing suit assemblies, component developments, and mobility exercises. The discussion covers description of the AX-3 suit, its performance, and technology developments. In conclusion, high-pressure space suit technology is demonstrated with the development of the Ames AX-3 suit assembly. Several photographs and diagrams supplement the text.

Vykukal, H. C.↗
NASA NTRS2017

International Space Station (ISS) Bacterial Filter Elements (BFEs): Filter Efficiency and Pressure Testing of Returned Units

The air revitalization system aboard the International Space Station (ISS) provides the vital function of maintaining a clean cabin environment for the crew and the hardware. This becomes a serious challenge in pressurized space compartments since no outside air ventilation is possible, and a larger particulate load is imposed on the filtration system due to lack of sedimentation due to the microgravity environment in Low Earth Orbit (LEO). The ISS Environmental Control and Life Support (ECLS) system architecture in the U.S. Segment uses a distributed particulate filtration approach consisting of traditional High-Efficiency Particulate Adsorption (HEPA) media filters deployed at multiple locations in each U.S. Segment module; these filters are referred to as Bacterial Filter Elements, or BFEs. These filters see a replacement interval, as part of maintenance, of 2-5 years dependent on location in the ISS. In this work, we present particulate removal efficiency, pressure drop, and leak test results for a sample set of 8 BFEs returned from the ISS after filter replacement. The results can potentially be utilized by the ISS Program to ascertain whether the present replacement interval can be maintained or extended to balance the on-ground filter inventory with extension of the lifetime of ISS beyond 2024. These results can also provide meaningful guidance for particulate filter designs under consideration for future deep space exploration missions.

Filtration↗
NASA NTRS1973

Regeneratively cooled rocket engine for space storable propellants

Analyses and experimental studies were performed with the OF2 (F2/O2)/B2H6 propellant combination over a range in operating conditions to determine suitability for a space storable pressure fed engine configuration for an extended flight space vehicle configuration. The regenerative cooling mode selected for the thrust chamber was explored in detail with the use of both the fuel and oxidizer as coolants in an advanced milled channel construction thrust chamber design operating at 100 psia chamber pressure and a nominal mixture ratio of 3.0 with a 60:1 area ratio nozzle. Benefits of the simultaneous cooling as related to gaseous injection of both fuel and oxidizer propellants were defined. Heat transfer rates, performance and combustor stability were developed for impinging element triplet injectors in uncooled copper calorimeter hardware with flow, pressure and temperature instrumentation. Evaluation of the capabilities of the B2H6 and OF2 during analytical studies and numerous tests with flow through electrically heated blocks provided design criteria for subsequent regenerative chamber design and fabrication.

Wagner, W. R.↗
NASA NTRS1977

The Space Shuttle Main Engine High-Pressure Fuel Turbopump rotordynamic instability problem

The SSME (Space Shuttle Main Engine) HPFTP (High-Pressure Fuel Turbopump) has been subject to a rotordynamic instability problem, characterized by large and damaging subsynchronous whirling motion. The original design of the HPFTP (from a rotordynamic viewpoint) and the evolution of the HPFTP subsynchronous whirl problem are reviewed. The models and analysis which have been developed and utilized to explain the HPFTP instability and improve its stability performance are also reviewed. Elements of the rotordynamic model which are discussed in detail include the following: (a) hydrodynamic forces due to seals, (b) internal rotor damping, (c) bearing and casing support stiffness asymmetry, and (d) casing dynamics. The stability and synchronous response characteristics of the following two design alternatives are compared: (a) a 'stiff' symmetric bearing support design and (b) a damped asymmetric stiffness design. With appropriate interstage seal designs, both designs are shown, in theory to provide substantially improved stability and synchronous response characteristics in comparison to the original design. The asymmetric design is shown to have better stability and synchronous response characteristics than the stiffly supported design.

Childs, D. W.↗
NASA NTRS1987

Impeller shroud to casing leakage flow simulations in the Space Shuttle Main Engine high pressure fuel pump

Quasi-three-dimensional Navier-Stokes calculations were carried out for the Space Shuttle Main Engine high-pressure fuel pump to simulate the impeller shroud to casing leakage flow. This flow geometry was modeled as an axisymmetric cavity flow with a stationary surface representing the casing, and a rotating surface denoting the impeller. A 63 x 81-node mesh provided sufficient resolution in the regions of greatest flow variations and reduced the effects of numerical diffusion. The turbulence field was closed with the high Reynolds number form of the k-epsilon model supplemented with wall functions in the vicinity of the walls. Finally, a parametric study quantified the effects of through mass flow changes on this leakage flow.

Sindir, Munir M.↗