Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process intensification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Manufacturing Process Design of a Micro-Scale Liquid-Liquid Extractor and Multi-phase Separator

Advances in process innovation within the chemical process industry are impeded by the cost of producing new innovative components. In this paper, various manufacturing process routes were evaluated for scaling up a micro-scale liquid-liquid extractor and multi-phase separator capable of separating immiscible phases that are used for the extraction of a chemical product into a lower boiling point solvent to make downstream distillation easier. A manufacturing process design methodology was used to evaluate both photochemical machining and binder jetting as a means for producing the micropost arrays within the separator. Cost curves show that for a 0.3 mm deep micropost array, photochemical machining was found to be much cheaper than binder jetting. However, because binder jetting processes enable microposts with over 13 times higher depth-to-width aspect ratios, binder jetting was found to decrease the overall costs of the extractor/separator by more than half for a 500 barrel per day plant, with breakeven as low as 15 barrels per day. These economics were confirmed by building extractor/separator plates and characterizing them dimensionally and functionally. The binder jet plates were found to perform better than photochemical plates leading to the complete separation of the organic phase from water. The utilization of slower sintering cycles combined with surface grinding provided acceptable dimensional tolerances for the binder jet plates. Using pressurized air during depowdering improved the economics for the binder jetting process.

42 ENGINEERING↗

A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate ports. Results from laboratory operations showed that the ASTM specification for bound acylglycerides was achieved only at extended reaction times ({approx}25 min) using a single-stage batch contact at elevated temperature and pressure. In the single-pass configuration, the time required gives no throughput advantage over the current batch reaction process. The limitation seems to be the presence of glycerine, which hinders complete conversion because of reversible reactions. Significant improvement in quality was indicated after a second and third passes, where product from the first stage was collected and separated from the glycerine, and further reacted with a minor addition of methanol. Chemical kinetics calculations suggest that five consecutive stages of 2 min residence time would produce better than ASTM specification fuel with no addition of methanol past the first stage. Additional stages may increase the capital investment, but the increase should be offset by reduced operating costs and a factor of 3 higher throughput. Biodiesel, a mixture of methyl esters, is made commercially from the transesterification of oil, often soy oil (see Reaction 1). The kinetics of the transesterification process is rapid; however, multiphase separations after the synthesis of the fuel can be problematic. Therefore, the process is typically run in batch mode. The biodiesel fuel and the glycerine product take several hours to separate. In addition, to push yields to completion, an excess of methoxide catalyst is typically used, which has to be removed from both the biodiesel and the glycerine phase after reaction. Washing steps are often employed to remove free fatty acids, which can lead to undesirable saponification. Standards for biodiesel purity are based either on the removal of contaminants before the oil feedstock is esterified or on the separation of unwanted by-products. Various methods have been examined to enhance either the pretreatment of biodiesel feedstocks or the posttreatment of reaction products, including the use of a cavitation reactor in the process intensification of the homogeneous acid catalysis of transesterification. Centrifugal mixing has been applied to biodiesel production, using the contactor as a low-throughput homogenizer, employing very low flow rates to increase residence times to tens of minutes. In this study, we have combined the reaction of oil and methoxide with the online separation of biodiesel and glycerine into one processing step, using a modified centrifugal contactor. Two distinct phases enter the reactor (reagents), and two distinct phases leave the reactor/separator (products), thus demonstrating the application of process intensification to high-throughput biofuel production. ORNL has been designing, fabricating, and operating centrifugal contactors for the selective extraction of actinide elements for over 25 years.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Maximizing energy savings attainable by dynamic intensification of binary distillation

Dynamic intensification of distillation columns has shown significant promise in achieving energy savings with minimal investment in new equipment. Conceptually, it entails making a desired product as a blend of two auxiliary products (one with higher purity, the other with lower purity, but both having lower energy consumption). Practically, dynamic intensification means periodically switching between two operating states corresponding to the aforementioned products. Past work has relied on ad-hoc choices of auxiliary products. In this paper, we introduce a new optimization framework for selecting auxiliary products for dynamic intensification. An extensive case study concerning the separation of a methanol/propanol mixture is then presented. We show that optimizing the choice of auxiliary products can lead to significant energy savings (more than 3.6% compared to a column operated at steady state) derived from dynamic intensification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized Modular Representation Framework for the Synthesis of Extractive Separation Systems

In this work, a systematic process synthesis and intensification method is presented for extractive separation based on the Generalized Modular Representation Framework (GMF). GMF employs a mass/heat exchange module-based superstructure representation, incorporating detailed thermodynamic model, to investigate conventional or intensified process options for nonideal azeotropic separation without a pre-postulation of plausible unit/flowsheet configurations. Orthogonal Collocation is also applied to enhance GMF representation to obtain intra-module operation information and module dimensionality estimation while maintaining model size compactness. Furthermore, entrainer selection, process synthesis, design, and intensification are examined within a single mixed-integer nonlinear optimization (MINLP) problem. A case study on the separation of ethanol-water mixture is presented to highlight the potential of the proposed approach in deriving optimal and verifiable extractive separation systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intensification differentially affects the delivery of multiple ecosystem services in subtropical and temperate grasslands

Intensification, the process of intensifying land management to enhance agricultural goods, results in “intensive” pastures that are planted with productive grasses and fertilized. These intensive pastures provide essential ecosystem services, including forage production for livestock. Understanding the synergies and tradeoffs of pasture intensification on the delivery of services across climatic regions is crucial to shape policies and incentives for better management of natural resources. Here, we investigated how grassland intensification affects key components of provisioning (forage productivity and quality), supporting (plant diversity) and regulating services (CO 2 and CH 4 fluxes) by comparing these services between intensive versus extensive pastures in subtropical and temperate pastures in the USDA Long-term Agroecosystem Research (LTAR) Network sites in Florida and Oklahoma, USA over multiple years. Our results suggest that grassland intensification led to a decrease in measured supporting and regulating services, but increased forage productivity in temperate pastures and forage digestibility in subtropical pastures. Intensification decreased the net CO 2 sink of subtropical pastures while it did not affect the sink capacity of temperate pastures; and it also increased environmental CH 4 emissions from subtropical pastures and reduced CH 4 uptake in temperate pastures. Intensification enhanced the global warming potential associated with C fluxes of pastures in both ecoregions. Our study demonstrates that comparisons of agroecosystems in contrasting ecoregions can reveal important drivers of ecosystem services and general or region-specific opportunities and solutions to maintaining agricultural production and reducing environmental footprints. Further LTAR network-scale comparisons of multiple ecosystem services across croplands and grazinglands intensively vs extensively managed are warranted to inform the sustainable intensification of agriculture within US and beyond. Our results highlight that achieving both food security and environmental stewardship will involve the conservation of less intensively managed pastures while adopting sustainable strategies in intensively managed pastures.

60 APPLIED LIFE SCIENCES↗

Selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over carbon supported copper catalysts using isopropyl alcohol as a hydrogen donor

Selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural to 2,5-dimethylfuran is of great importance. Here, we reveal a simple pathway for green and efficient HDO using readily available copper with in-situ hydrogen generation. A highly dispersed Cu/PBSAC catalyst consisting of small metallic Cu 0 nanoparticles carries out isopropyl alcohol (IPA) dehydrogenation and subsequent HDO of HMF. Density functional theory calculations reveal that the dehydrogenation of IPA is more favorable on Cu(211) with a lower energy barrier of ~0.6 eV. This facet exists in a higher ratio on nanosized catalysts. Batch reactions using Cu/PBSAC at 190 °C exhibited 91.9% HMF conversion and 71.7% DMF selectivity in 6 hr, and > 96% DMF yield in 10 hr. The mechanical strength of the carbon support is ideal for continuous processing for increased productivity; we demonstrate a > 90% DMF yield at 1/WHSV of 2.4 hr. The process demonstrated here can be integrated with upstream HMF separation utilizing carbon adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temporal performance indicators for an integrated pilot-scale membrane distillation-concentrated solar power/photovoltaic system

Management of concentrate streams in inland applications has uncertain long-term environmental impacts. This study investigates an intensified solar-energy capture desalination system that integrates membrane distillation (MD) with a hybrid concentrated solar power (CSP)/photovoltaic (PV) collector to realize self-sustained zero-waste discharge for effective management of concentrate streams in inland and off-grid applications. The demonstration-scale CSP/PV system can produce up to 178 kWh of thermal energy and 4 kWh of electrical energy per day. The thermal and electrical energy from the CSP/PV system is directly supplied to the air gap MD (AGMD) pilot-scale system producing up to 288 L of distilled water per day. Experiments were performed on the hybrid AGMD-CSP/PV system to evaluate system performance under various operating conditions including AGMD and CSP flow rates, CSP system pre-heating, and AGMD vacuum pressure. Experimental results indicate that doubling the AGMD flow rate results in a 119% increase in thermal energy utilization and a 71% increase in distillate production. Compared to the winter months, operating the system in summer months when direct normal irradiance (DNI) is highest results in nearly double the distillate production (88 L in winter and 168 L in summer) and nearly three times the amount of thermal energy consumption (15 kWh in winter and 43 kWh in summer). Operating with vacuum resulted in a 34% increase in distillate production and allowing the thermal storage reservoir to preheat in the winter resulted in a 61% increase in distillate production. Altogether, experimental results highlight the tradeoff between distillate production and thermal and electrical energy production and consumption under various environmental conditions and the potential for AGMD-CSP/PV to be a stand-alone desalination system.

14 SOLAR ENERGY↗

Silica-encapsulated Fe 2 O 3 oxygen carriers for selective chemical looping combustion of hydrogen

Methane dehydroaromatization (MDA) combined with chemical looping (CL) combustion of hydrogen can overcome the MDA thermodynamic constraints conventionally limiting conversion. Development of selective hydrogen-oxidation oxygen carriers in the presence of aromatics in the CL is key to improve MDA performance in the coupled reaction system. Here, in this paper, we show that a novel oxygen carrier (silica-encapsulated Fe 2 O 3 with Fe/Si mole ratio of 1.2) yields high overall methane conversion (49%) and aromatics yield (up to 36%) during 4 h of recirculating a stream in the developed system. A silica layer encapsulating Fe 2 O 3 favors hydrogen transport and oxidation, preventing aromatics diffusing to the Fe 2 O 3 surface. A close physical contact between iron oxide particles and silica, and near complete encapsulation of the particles by the silica layer can facilitate hydrogen conversion without full depletion of iron oxides by forming iron silicates. The silica-encapsulated iron oxide particles can be reoxidized in air after depletion of its oxidative capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Continuous recovery of phosphoric acid and Rare-Earths containing particles from phosphoric acid sludge using a decanter centrifuge

Recovery of rare earth elements (REEs) from various industrial and natural streams currently draws significant attention in efforts to meet the demands of the manufacturing industry. Among many industrial byproducts and waste streams, phosphoric acid sludge could be one of the most economically feasible resources for the recovery of REEs because solid particles in the sludge contain relatively concentrated REEs, up to 3,000 ppm, while the liquid component of the sludge is valuable phosphoric acid (P 2 O 5 ) that can be recovered and returned to the main product. Due to high viscosity and large solids content (e.g., 30–40 %), however, this byproduct stream requires multistep separation and purification processes. In this study, a single-step process involving a continuous-flow decanter centrifuge (CFDC) was employed to investigate its feasibility for continuous solid/liquid separation from real phosphoric acid sludge. High centrifugal forces generated from up to 1500 G gravity acceleration separate solid particles from the sludge, generating a liquid-rich stream and a solids-rich stream at the exit of the CFDC. A single pass of phosphoric-acid sludge through the CFDC yielded 95 % liquid recovery and 90 % recovery of REEs-containing solids from 20 to 34 wt% solids-containing sludge. Finally, a reduced order model developed for the CFDC operation showed good agreement with experimental data, and preliminary technoeconomic analysis revealed potential process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel system for ammonia-based sustainable energy and agriculture: Concept and design optimization

Here this work presents a new vision for sustainable energy supply and agriculture: an ammonia-based sustainable energy agriculture (ABSEA) system. This intensified system uses renewables to produce ammonia both as fertilizer and as fuel for tractors and grain drying, to meet local electrical power demand and to provide predictable, consistent power export to the grid. The conceptual design of this system exploits synergies between ammonia production and energy supply to allow for economic viability, specifically time-varying chemical production as well as the potential of ammonia and hydrogen as energy storage media. A framework for combined optimization of the ABSEA design and its inherently time-varying operating schedule is proposed with a view on further improving economic competitiveness. A case study which considers the use of wind turbines to meet ammonia fertilizer and fuel demands of 40,300 kg/year and an annual hourly average power demand of 985 kW demonstrates the promise of the ABSEA system and the associated design-scheduling optimization framework. The annual net present cost is approximately $\$$75,000, which corresponds to an emissions reduction cost of $\$$17.60/tonCO2. The ABSEA optimal design uses both hydrogen and ammonia, but not a battery, for energy storage, illustrating their efficacy in this synergistic application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data-driven simultaneous process optimization and adsorbent selection for vacuum pressure swing adsorption

Technologies for post-combustion carbon capture are essential for the reduction of greenhouse gas emissions to the atmosphere. However, they are still associated with high costs and energy consumption. Intensified processes for carbon capture have the potential to overcome these challenges due to their higher efficiency, lower capital cost, and increased operational flexibility. Here, this work investigates simultaneous optimization of process conditions and adsorbent selection for a modular Vacuum Pressure-Swing Adsorption system designed for CO 2 capture. Both surrogate-based Nonlinear Programming and Mixed-Integer Nonlinear Programming approaches are applied and compared in terms of computational efficiency and solution accuracy. Moreover, process performance results are examined by applying several data analytics techniques to gain insights into the material-process correlations. Data-driven classifiers and neural networks can accurately predict whether a material is likely to satisfy purity, recovery, and energy constraints when operated at optimal process conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distributed sustainable metals production: opportunities for intensifying separations & alternative feedstocks

Meeting the increased demand for rare earth elements and beyond primary mined ore. Secondary sources like phosphogypsum, coal fly ash, used nuclear fuel, and electronic waste are concentrated sources of critical minerals. One strategy for a resilient supply chain is to decentralize sourcing and hydrometallurgical processing of metals. Rotating packed beds (RPBs) for solid-phase extraction and liquid-liquid extraction are gaining momentum for their ability to increase process throughput by 5-10x the state of the art. In conclusion, this review discusses advances in hydrometallurgical RPB processes and opportunities for implementation in distributed metals production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Global optimization of multicomponent distillation configurations: Global minimization of total cost for multicomponent mixture separations

We introduce a global optimization framework for determining the minimum cost required to distill any ideal or near-ideal multicomponent mixture into its individual constituents using a sequence of columns. This new framework extends the Global Minimization Algorithm (GMA) previously introduced by Nallasivam et al. (2016); and we refer to the new framework as the Global Minimization Algorithm for Cost (GMAC). GMAC guarantees global optimality by formulating a nonlinear program (NLP) for each and every distillation configuration in the search space and solving it using global optimization solvers. In conclusion, the case study presented in this work not only demonstrates the need for developing such an algorithm, but also shows the flexibility and effectiveness of GMAC, which enables process engineers to design and retrofit energy efficient and cost-effective distillation configurations.

42 ENGINEERING↗

Integrated solar thermochemical reaction system for steam methane reforming

Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heat exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.

03 NATURAL GAS↗

Impact of low-chemical storage pretreatment of loblolly pine bark on biochar from microwave pyrolysis

Forest product residues such as bark represent a low-cost, abundant feedstock for bioenergy, but their high ash and alkali and alkaline earth metal (AAEM) content limit thermochemical conversion efficiency. This study evaluates the use of low-severity chemical pretreatments during anaerobic storage to improve the performance of microwave pyrolysis for loblolly pine bark. Bark was treated with dilute sulfuric acid (0.1% and 1%, w/w) or sodium hydroxide (4%, w/w) and incubated anaerobically for one or two weeks to simulate in-pile biorefinery storage. The most effective treatment—1% H2SO4 for two weeks—reduced AAEM content by 35.7% and increased bio-oil yield by 11% compared to untreated controls, while also reducing pyrolysis gas production. In contrast, alkali treatment did not reduce AAEM levels and led to decreased bio-oil yields with increased gas formation. Although biochar yields were relatively stable across treatments, their physicochemical characteristics varied significantly. Acid-treated bark yielded biochars with higher carbon content, lower O/C and H/C ratios, greater surface area, and enhanced heating values. These improvements suggest that chemical pretreatment during storage can tailor biochar quality for specific end uses. Biochars produced under optimized conditions exhibited properties suitable for soil amendment, carbon sequestration, and solid fuel applications. This integrated approach—combining storage, mild chemical conditioning, and microwave pyrolysis—provides a viable pathway to enhance the value and sustainability of bark-derived bioenergy products.

09 - BIOMASS FUELS↗

Continuous caustic aqueous phase electrochemical reforming (CAPER) of ethanol for producing compressed hydrogen

Caustic Aqueous Phase Electrochemical Reforming (CAPER) of ethanol produces pure compressed H 2 at lower voltages, temperatures, and energy requirements than conventional electrolysis, while capturing carbonaceous products. The CAPER flow reactor consists of stainless steel endplates, stainless steel current collectors, and a Teflon flow field. The electrodes are prepared using commercial palladium nanoparticles on carbon support for the anode and platinum nanoparticles on carbon support for the cathode. The catalyst metal loading was 1 mgcm –2 on a 10cm 2 carbon cloth for both electrodes. Our CAPER reactor produces pure H 2 at 80bar and 80°C applying voltages at ≤0.5V. The only gas-phase product detected was H 2 and any carbonaceous products were contained in the liquid phase. The H 2 was produced with 97±4% faradaic efficiency. Further, operating at smaller electrode separation distances (4mm) and 80°C increased the current density. The highest lower heating value efficiency achieved was 28% at a flow rate of 0.05mLmin –1 and an applied voltage of 0.5V. The compressed H 2 was produced at ≤20 kWh kg –1 , which is much lower than electrolysis systems that require upwards of 50 kWh kg –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗