SEARCH · Search NASA

Results for “Projective geometries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Analysis of the density field around a supersonic conical projectile using quantitative schlieren

Quantitative schlieren imaging is a flow measurement technique that is capable of measuring density fields throughout refractive flowfields. The technique was applied here to measure the density field surrounding supersonic conical projectiles in free flight. Shock waves attached to a supersonic conical projectile offer a simple geometry with the well-established Taylor–Maccoll analytical flow solution to which these experimental measurements were compared. The schlieren images recorded a projection of the index of refraction field surrounding the 10° half-angle cones which was converted to density first through an Abel inversion and then the Gladstone–Dale law. Three Abel inversion methods—two-point, three-point, and arbitrary ray axisymmetric projection (ARAP)—were applied to deconvolute the three-dimensional flow within the constrained axisymmetric flow field. The resulting reconstructed density profiles were compared to the Taylor–Maccoll solution, parameterized by cone geometry and Mach number. The experimental density fields demonstrated strong agreement with the theoretical profiles. Experimental consistency was confirmed across various projectile speeds, demonstrating quantitative schlieren’s capability to accurately reconstruct the density of the flow field, even within the resolution constraints imposed by high-speed imaging. In conclusion, an assessment of experimental uncertainties in the density reconstruction was performed.

Abel Inversion↗

NASA NTRS1994

Cross-effects in microgravity flows

In microgravity materials growth (i.e., crystal growth via vapor deposition) experiments, it is of interest ot understand and control the flows that arise from the molecular rather than the mere continuum nature of the gases and the vapors. The project research is a theoretical and experimental investigation of the flow of gas/vapor mixtures in realistic geometries and environments, as well as the application of new fundamental understandings to simulating flows in the ampoules. Towards this goal, the research tasks are: to obtain a theoretical description of the flow by solving appropriate kinetics equations; to verify the results by acquiring experimental data in a diffusion cell; and to explore applications of the results above to simulations of flows in the ampoules. The paper provides a description of the cross-phenomena and the progress realized to-date by the project personnel.

Loyalka, Sudarshan K.↗

NASA NTRS2007

A Microfabricated Involute-Foil Regenerator for Stirling Engines

A segmented involute-foil regenerator has been designed, microfabricated and tested in an oscillating-flow rig with excellent results. During the Phase I effort, several approximations of parallel-plate regenerator geometry were chosen as potential candidates for a new microfabrication concept. Potential manufacturers and processes were surveyed. The selected concept consisted of stacked segmented-involute-foil disks (or annular portions of disks), originally to be microfabricated from stainless-steel via the LiGA (lithography, electroplating, and molding) process and EDM (electric discharge machining). During Phase II, re-planning of the effort led to test plans based on nickel disks, microfabricated via the LiGA process, only. A stack of nickel segmented-involute-foil disks was tested in an oscillating-flow test rig. These test results yielded a performance figure of merit (roughly the ratio of heat transfer to pressure drop) of about twice that of the 90% random fiber currently used in small ~ 100 W Stirling space-power convertors in the Reynolds Number range of interest (50-100). A Phase III effort is now underway to fabricate and test a segmented-involute-foil regenerator in a Stirling convertor. Though funding limitations prevent optimization of the Stirling engine geometry for use with this regenerator, the Sage computer code will be used to help evaluate the engine test results. Previous Sage Stirling model projections have indicated that a segmented-involute-foil regenerator is capable of improving the performance of an optimized involute-foil engine by 6-9%; it is also anticipated that such involute-foil geometries will be more reliable and easier to manufacture with tight-tolerance characteristics, than random-fiber or wire-screen regenerators. Beyond the near-term Phase III regenerator fabrication and engine testing, other goals are (1) fabrication from a material suitable for high temperature Stirling operation (up to 850 C for current engines; up to 1200 C for a potential engine-cooler for a Venus mission), and (2) reduction of the cost of the fabrication process to make it more suitable for terrestrial applications of segmented involute foils. Past attempts have been made to use wrapped foils to approximate the large theoretical figures of merit projected for parallel plates. Such metal wrapped foils have never proved very successful, apparently due to the difficulties of fabricating wrapped-foils with uniform gaps and maintaining the gaps under the stress of time-varying temperature gradients during start-up and shut-down, and relatively-steady temperature gradients during normal operation. In contrast, stacks of involute-foil disks, with each disk consisting of multiple involute-foil segments held between concentric circular ribs, have relatively robust structures. The oscillating-flow rig tests of the segmented-involute-foil regenerator have demonstrated a shift in regenerator performance strongly in the direction of the theoretical performance of ideal parallel-plate regenerators.

Tew, Roy↗

DOE OSTI2026

First-Principles Evaluation of Proton Hopping in Tetrahedral Oxide Motifs

Proton-conducting oxides (PCOs) are important materials used as ionic conductors for energy conversion technologies. Existing research efforts on PCO optimization and discovery generally focus on complex perovskite-based oxides that require doping and alloying to engineer oxygen deficiency and high proton conductivity. However, the variety of chemical compositions and coordination environments in oxides poses challenges for efficient materials design. In this computational study, we construct a database of simplified motifs to elucidate the relationship between fundamental materials chemistry and proton kinetics. Specifically, we focus on the zincblende crystal structure as a proxy for tetrahedral metal–oxide (M–O) coordination environments. We systematically quantified the effects of cation type, oxidation states, and M–O bond lengths on the proton hopping barrier, and found that strong M–O bonds and metal cations with large and variable oxidation states (e.g., Mo 6+ , V 5+ ) lead to smaller proton hopping barriers. By mapping the candidate cations and their preferred bond geometries onto materials databases such as the Inorganic Crystal Structure Database (ICSD) and Materials Project, we identified real materials containing the corresponding metal–oxide units. In general, we observed good agreement between the calculated proton hopping barriers obtained in real crystal structures and those predicted by our motif database. We also discuss the limitations of our model and possible future extensions to improve its predictive capabilities. Overall, our model provides a first step for the rational design and quick screening of energy-efficient PCOs.

organic↗

DOE OSTI2021

Ducted Fuel Injection and Cooled Spray Technologies for Particulate Control in Heavy-Duty Diesel Engines

Heavy-Duty diesel engine manufacturers are continuously in pursuit of simple and low-cost technologies that can reduce emissions. Ducted fuel injection (DFI) and Cooled Spray (CS) technologies are two technologies that continue to show promise for significant particulate emissions reductions. These technologies represent a breakthrough in diesel engine combustion from the potential of nearly sootless diesel combustion. This can provide a significant decrease in harmful PM emissions and may enable further system optimization for reduced NOx emissions and increased efficiency. Combustion vessel experiments and engine demonstrations at Sandia, together with the large bore engine tests performed by Wabtec show that this technology may be applicable to heavy duty diesel engines across a wide range of engine sizes and speeds representing the majority of off-road diesel engines. However, very little is known about the ideal geometry, scaling properties or effectiveness of these technologies over the engine operating map. This project will address those uncertainties through a series of experiments performed in an optical and a metal single-cylinder engine.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Welding of Haynes 282 to Steels to Enable Modular Rotors for Advanced Ultra Super-Critical Steam Turbines

Steam turbines for an Advanced Ultra Super Critical (AUSC) fossil fired power plant will operate at temperatures well above those of current commercial steam cycles with inlet temperatures more than 760 C , which is beyond the capabilities of alloy steels presently used for steam turbine applications and requires advanced materials. Large components such as steam turbine rotors may be made of nickel based super alloys such as Haynes 282 (H282). However, monolithic forgings of superalloys in the sizes required for large steam turbines rotors can be prohibitively expensive besides many technical challenges. To minimize cost and alleviate the related technical challenges, superalloy use needs to be limited to locations on the steam turbine rotor where strength and temperature requirements cannot be met by conventional steels. This is possible if nickel-based superalloys can be successfully welded to steels and the related technical challenges - machining parts made of dissimilar welded materials, non-destructive examination of such welds for flaw detection; and, material properties of such hybrid components – are sufficiently addressed. In this technology development project, we successfully welded H282 to plates up to ~ 75 mm (~ 3 inches) to a 3.5NiCrMoV steel of similar thickness. Advanced ultrasonic inspection technique called Phased Array Ultrasonic Testing (PAUT) was employed to examine the dissimilar H282-Steel welds, into which flat bottomed side drilled holes (SDH) of various diameters were introduced, to determine the minimum detectable feature sizes; it was shown that with PAUT SDH of dia. down to 0.5 mm could be detected in the base alloys and SDH with dia. down to 2.4 mm could be detected in the weld metal under multiple orientations successfully. An autonomous machining process monitoring system was developed and demonstrated whereby the forces acting on the cutting tool could be actively monitored as the cutting tool transitioned from H282 to Steel across the weld using which the machining parameters can be potentially altered without interruption to extend tool life. This project successfully achieved its objectives of - i. Developing a welding methodology and viable welding geometries, to successfully join H282 to steel 3.5CrMoNiV steel to enable manufacture of modular steam turbine rotors for AUSC applications (conditions of at least 760 °Celsius and 3,100 psia (pounds per square inch absolute pressure) and evaluate the material properties of the welded specimen. ii. Employ the advanced ultrasonic inspection technique to the dissimilar weld metal joint and determine the minimum detectable feature sizes. iii. Develop effective machining techniques to machine such hybrid structures with online tool force monitoring and effect machine state metrics for optimal results.

20 FOSSIL-FUELED POWER PLANTS↗

NASA NTRS1974

Application of remote sensing to state and regional problems

The primary purpose of the remote sensing applications program is for various members of the university community to participate in activities that improve the effective communication between the scientific community engaged in remote sensing research and development and the potential users of modern remote sensing technology. Activities of this program are assisting the State of Mississippi in recognizing and solving its environmental, resource and socio-economic problems through inventory, analysis, and monitoring by appropriate remote sensing systems. Objectives, accomplishments, and current status of the following individual projects are reported: (1) bark beetle project; (2) state park location planning; and (3) waste source location and stream channel geometry monitoring.

Miller, W. F.↗

NASA NTRS1982

Solar-powered airplane design for long-endurance, high-altitude flight

This paper describes the performance analysis and design of a solar-powered airplane for long-endurance, unmanned, high-altitude cruise flight utilizing electric propulsion and solar energy collection/storage devices. For a fixed calendar date and geocentric latitude, the daily energy balance, airplane sizing, and airplane aerodynamics relations combine to determine airplane size and geometry to meet mission requirements. Vehicle component weight loadings, aerodynamic parameters, and current and projected values of power train component characteristics form the basis of the solution. For a specified mission, a candidate airplane design is presented to demonstrate the feasibility of solar-powered long endurance flight. Parametric data are presented to illustrate the airplane's mission flexibility.

Youngblood, J. W.↗

NASA NTRS1984

Ellipsoids and lightcurves

The determination of the light curve (LC) of a geometrically scattering ellipsoid is considered in relation to the problem of investigating the physical properties of asteroids. A simple concise formula is derived for the area of a projection of an ellipsoid, and this expression is used to obtain a general formula for the projected, visible, illuminated area of a triaxial ellipsoid for arbitrary sun-earth-asteroid geometry. It is found that the LC of an ellipsoid has special properties that can be exploited to test the hypothesis that a given optical or radar LC could be due to a geometrically scattering ellipsoid.

Connelly, R.↗

NASA NTRS1992

Venus in motion: An animated video catalog of Pioneer Venus Orbiter Cloud Photopolarimeter images

Images of Venus acquired by the Pioneer Venus Orbiter Cloud Photopolarimeter (OCPP) during the 1982 opportunity have been utilized to create a short video summary of the data. The raw roll by roll images were first navigated using the spacecraft attitude and orbit information along with the CPP instrument pointing information. The limb darkening introduced by the variation of solar illumination geometry and the viewing angle was then modelled and removed. The images were then projected to simulate a view obtained from a fixed perspective with the observer at 10 Venus radii away and located above a Venus latitude of 30 degrees south and a longitude 60 degrees west. A total of 156 images from the 1982 opportunity have been animated at different dwell rates.

Limaye, Sanjay S.↗

NASA NTRS1993

Evaluation of frequency-selective reflector antenna systems

The performance of a four-frequency (S/X/Ku/Ku bands) frequency-selective surface (FSS) with double-ring elements (the type of geometry particularly well suited for the circular polarization requirement of the NASA's Cassini project) is evaluated for a planar and a curved FSS subreflector in a dual reflector antenna system. Good agreement is obtained between the calculated and measured data for the planar FSS model. The FSS effects in a four-frequency Cassegrain reflector antenna were accurately evaluated by taking into account the surface curvature and the FSS subreflector's transmitted/reflected field variation as functions of the polarization and the incident angles with respect to the local coordinates.

Wu, T. K.↗

NASA NTRSDate not supplied

Composition Reanalyses at NASA’s Global Modeling and Assimilation Office

Scientific Assessments of Ozone Depletion 2018 and 2022 report the recovery of Antarctic ozone, consistent with diminishing concentrations of halogens in the stratosphere. Both the size and the depth of the springtime ozone holes exhibit downward trends, particularly in September. Superimposed on the recovery trend are significant year-to-year fluctuations arising from dynamical variability potentially influenced by climate forcing and volcanic eruptions. Since 2018 the Antarctic stratosphere has experienced a wild parade of austral spring seasons with a sudden stratospheric warming and exceptionally high ozone in 2019 followed by large and long-lasting ozone holes in the following years, prompting questions about the speed and detectability of Antarctic ozone recovery and its potential connections to human-induced climate change. From the Australian New Years’ wildfires of 2020 to volcanic aerosols to the unprecedented injection of water vapor by the Hunga volcanic eruption, recent scientific literature on the subject investigates many factors that may or may not have contributed to this remarkable interannual variability. This presentation summarizes dynamical influences on springtime Antarctic stratospheric ozone in recent years and discusses these results in the context of long-term trends. In particular, this work seeks to isolate dynamical and chemical contributions to the Antarctic springs since 2019 using a consistent methodological framework. Our analysis uses constituent and meteorological fields from the MERRA-2 Stratospheric Composition Reanalysis of Aura MLS (M2-SCREAM) in combination with data from the Atmospheric Chemistry Experiment – Fourier Transform Spectrometer and from ozone sondes. Using the high spatial and temporal resolution of M2-SCREAM, we analyze the daily evolution of southern polar ozone, HCl, N2O, and water vapor in dynamical flow-following coordinates relative to the location, size, and shape of the polar vortex. For vertically integrated stratospheric ozone we emphasize the importance of the wave-influenced geometry of the polar vortex and its vertical alignment. The ultimate purpose of this project is to contribute to the quantification of the speed of the Antarctic ozone recovery and associated uncertainties.

Krzysztof Wargan↗

NASA NTRS2007

A Microfabricated Involute-Foil Regenerator for Stirling Engines

A segmented involute-foil regenerator has been designed, microfabricated and tested in an oscillating-flow rig with excellent results. During the Phase I effort, several approximations of parallel-plate regenerator geometry were chosen as potential candidates for a new microfabrication concept. Potential manufacturers and processes were surveyed. The selected concept consisted of stacked segmented-involute-foil disks (or annular portions of disks), originally to be microfabricated from stainless-steel via the LiGA (lithography, electroplating, and molding) process and EDM. During Phase II, re-planning of the effort led to test plans based on nickel disks, microfabricated via the LiGA process, only. A stack of nickel segmented-involute-foil disks was tested in an oscillating-flow test rig. These test results yielded a performance figure of merit (roughly the ratio of heat transfer to pressure drop) of about twice that of the 90 percent random fiber currently used in small approx.100 W Stirling space-power convertors-in the Reynolds Number range of interest (50 to 100). A Phase III effort is now underway to fabricate and test a segmented-involute-foil regenerator in a Stirling convertor. Though funding limitations prevent optimization of the Stirling engine geometry for use with this regenerator, the Sage computer code will be used to help evaluate the engine test results. Previous Sage Stirling model projections have indicated that a segmented-involute-foil regenerator is capable of improving the performance of an optimized involute-foil engine by 6 to 9 percent; it is also anticipated that such involute-foil geometries will be more reliable and easier to manufacture with tight-tolerance characteristics, than random-fiber or wire-screen regenerators. Beyond the near-term Phase III regenerator fabrication and engine testing, other goals are (1) fabrication from a material suitable for high temperature Stirling operation (up to 850 C for current engines; up to 1200 C for a potential engine-cooler for a Venus mission), and (2) reduction of the cost of the fabrication process to make it more suitable for terrestrial applications of segmented involute foils. Past attempts have been made to use wrapped foils to approximate the large theoretical figures of merit projected for parallel plates. Such metal wrapped foils have never proved very successful, apparently due to the difficulties of fabricating wrapped-foils with uniform gaps and maintaining the gaps under the stress of time-varying temperature gradients during start-up and shut-down, and relatively-steady temperature gradients during normal operation. In contrast, stacks of involute-foil disks, with each disk consisting of multiple involute-foil segments held between concentric circular ribs, have relatively robust structures. The oscillating-flow rig tests of the segmented-involute-foil regenerator have demonstrated a shift in regenerator performance strongly in the direction of the theoretical performance of ideal parallel-plate regenerators.

Tew, Roy↗

DOE OSTI2020

ELSI — An open infrastructure for electronic structure solvers

Routine applications of electronic structure theory to molecules and periodic systems need to compute the electron density from given Hamiltonian and, in case of non-orthogonal basis sets, overlap matrices. System sizes can range from few to thousands or, in some examples, millions of atoms. Different discretization schemes (basis sets) and different system geometries (finite non-periodic vs. infinite periodic boundary conditions) yield matrices with different structures. The ELectronic Structure Infrastructure (ELSI) project provides an open-source software interface to facilitate the implementation and optimal use of high-performance solver libraries covering cubic scaling eigensolvers, linear scaling density-matrix-based algorithms, and other reduced scaling methods in between. In this paper, we present recent improvements and developments inside ELSI, mainly covering (1) new solvers connected to the interface, (2) matrix layout and communication adapted for parallel calculations of periodic and/or spin-polarized systems, (3) routines for density matrix extrapolation in geometry optimization and molecular dynamics calculations, and (4) general utilities such as parallel matrix I/O and JSON output. The ELSI interface has been integrated into four electronic structure code projects (DFTB+, DGDFT, FHI-aims, SIESTA), allowing us to rigorously benchmark the performance of the solvers on an equal footing. Based on results of a systematic set of large-scale benchmarks performed with Kohn–Sham density-functional theory and density-functional tight-binding theory, we identify factors that strongly affect the efficiency of the solvers, and propose a decision layer that assists with the solver selection process. As a result, we describe a reverse communication interface encoding matrix-free iterative solver strategies that are amenable, e.g., for use with planewave basis sets.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

A Custom Machine to Convey Radiologically Impacted Cohesive Soils to the Orion ScanSortSM System - 20382

An established method to reduce the volume of material required to be disposed of as radioactive waste is conveyor-based sorting of potentially radiologically impacted soils. With the Orion ScanSortSM system, potentially impacted soils are conveyed beneath radiation detectors and sorted into above and below criteria bins based on the detectors' response. Confident measurements can only be efficiently achieved when the soil column being conveyed has a reasonably consistent geometry. Highly cohesive soils present a very significant challenge as they tend to clump and adhere to the conveyor hopper, strike-off bar, and belt skirting. This causes voids and valleys in the soil column that affect the measurement geometry and reduce the confidence in the measurement. The reduction in confidence necessitates a longer residence time (i.e. reduction in conveyor belt speed and processing rates) or that the soils in highly unfavorable geometries be dispositioned as impacted or segregated for resurvey (should site logistics support that option). These outcomes may increase the volume of material required to be dispositioned as radiological waste and have a negative impact on project cost and schedule. To minimize impact to sorting operations, Wood designed and built a customized Extruder, to optimize the soil column prior to assay. The design was developed and refined to minimize the volume of highly cohesive soils presented in highly unfavorable geometries in the soil column in order to confidently assess and disposition such soils in a high-production environment. The Extruder is a customized 90 cm wide flat conveyor that has an oversized hopper with a pair of motor-driven rollers that force the soils in the hopper through an opening of adjustable height. The soils are extruded through the opening to produce a soil column that is ∼75 cm wide and ∼8-18 cm deep with a design rate of 225 metric tons/hr. The Extruder was recently deployed with the Orion ScanSort{sup SM} System to a site in northeast Ohio. The site has highly cohesive soils that result from the weathering of glacial sediments and consist of clay and clay loam, resulting in poor drainage and high moisture content. The project infrastructure only supported two bins of material (above and below criteria), which necessitated that soils with unfavorable geometries be discharged into the above criteria bin, along with material determined to have been contaminated. The Extruder was extremely successful in producing a stable soil column with favorable geometries for radiological assay. During production, less than 0.5% (by mass) of the soils processed were presented in unsatisfactory geometries requiring disposition as radioactive waste. The Extruder did not get clogged due to the cohesive soils (as is typical with conventional conveyors) and required very little maintenance, again minimizing impacts to sorting operations. The conveyor belt speed was operated at 14 cm/s with a typical belt loading of ∼109 kg/m resulting in a mean process rate of ∼49 metric tons/hr. The process rate was constrained by other project logistics, rather than by the capabilities of the Extruder, which was operated at less than 20% of the maximum design speed (75 cm/s). It is concluded that the Extruder is highly likely to produce a stable highly cohesive soil column suitable for efficient and confident radiological assay in production environments of 250 short tons/hr or more. The Extruder has the capability to drastically reduce the duration and costs of projects with radiologically impacted highly cohesive soils. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1985

Ellipsoidal geometry in asteroid thermal models - The standard radiometric model

The major consequences of ellipsoidal geometry in an othewise standard radiometric model for asteroids are explored. It is shown that for small deviations from spherical shape a spherical model of the same projected area gives a reasonable aproximation to the thermal flux from an ellipsoidal body. It is suggested that large departures from spherical shape require that some correction be made for geometry. Systematic differences in the radii of asteroids derived radiometrically at 10 and 20 microns may result partly from nonspherical geometry. It is also suggested that extrapolations of the rotational variation of thermal flux from a nonspherical body based solely on the change in cross-sectional area are in error.

Brown, R. H.↗

NASA NTRS1989

Probalistic Finite Elements (PFEM) structural dynamics and fracture mechanics

The purpose of this work is to develop computationally efficient methodologies for assessing the effects of randomness in loads, material properties, and other aspects of a problem by a finite element analysis. The resulting group of methods is called probabilistic finite elements (PFEM). The overall objective of this work is to develop methodologies whereby the lifetime of a component can be predicted, accounting for the variability in the material and geometry of the component, the loads, and other aspects of the environment; and the range of response expected in a particular scenario can be presented to the analyst in addition to the response itself. Emphasis has been placed on methods which are not statistical in character; that is, they do not involve Monte Carlo simulations. The reason for this choice of direction is that Monte Carlo simulations of complex nonlinear response require a tremendous amount of computation. The focus of efforts so far has been on nonlinear structural dynamics. However, in the continuation of this project, emphasis will be shifted to probabilistic fracture mechanics so that the effect of randomness in crack geometry and material properties can be studied interactively with the effect of random load and environment.

Liu, Wing-Kam↗

NASA NTRS2019

Testing and Analysis Correlation of Composite Sandwich Longitudinal Bonded Joints for Space Launch Vehicle Structures

The NASA Composite Technology for Exploration (CTE) Project has been developing and demonstrating critical composite technologies with a focus on joints; incorporating materials, design/analysis, manufacturing, and tests that utilize NASA expertise and capabilities. The CTE project has focused on the development of composite longitudinal bonded joint technologies for conical structures such as the SLS Payload Attach Fitting (PAF) due to challenging joint geometries and loads compared to cylindrical jointed structures. The CTE team selected and designed a double-lap composite bonded joint as the most advantageous longitudinal joint to advance for the CTE project. This paper reports on the longitudinal bonded joint sub-element test articles that were fabricated and tested for several loading conditions to test the capability of the bonded joint design. Test and analysis correlation to the sub-element test articles are presented in the paper.

Sleight, David W.↗