Search NASA⌕ Search

SEARCH · Search NASA

Results for “Prototype tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Experimental Verification of Electric Drive Technologies Based on Artificial Intelligence Tools

In this report, a fully integrated prototype of a flight servo control system is successfully developed and implemented using brushless dc motors. The control system is developed by the fuzzy logic theory, and implemented with a multilayer neural network. First, a neural network-based architecture is introduced for fuzzy logic control. The characteristic rules and their membership functions of fuzzy systems are represented as the processing nodes in the neural network structure. The network structure and the parameter learning are performed simultaneously and online in the fuzzy-neural network system. The structure learning is based on the partition of input space. The parameter learning is based on the supervised gradient decent method, using a delta adaptation law. Using experimental setup, the performance of the proposed control system is evaluated under various operating conditions. Test results are presented and discussed in the report. The proposed learning control system has several advantages, namely, simple structure and learning capability, robustness and high tracking performance and few nodes at hidden layers. In comparison with the PI controller, the proposed fuzzy-neural network system can yield a better dynamic performance with shorter settling time, and without overshoot. Experimental results have shown that the proposed control system is adaptive and robust in responding to a wide range of operating conditions. In summary, the goal of this study is to design and implement-advanced servosystems to actuate control surfaces for flight vehicles, namely, aircraft and helicopters, missiles and interceptors, and mini- and micro-air vehicles.

Rubaai, Ahmed↗

Securing Sensitive Flight and Engine Simulation Data Using Smart Card Technology

NASA Glenn Research Center has developed a smart card prototype capable of encrypting and decrypting disk files required to run a distributed aerospace propulsion simulation. Triple Data Encryption Standard (3DES) encryption is used to secure the sensitive intellectual property on disk pre, during, and post simulation execution. The prototype operates as a secure system and maintains its authorized state by safely storing and permanently retaining the encryption keys only on the smart card. The prototype is capable of authenticating a single smart card user and includes pre simulation and post simulation tools for analysis and training purposes. The prototype's design is highly generic and can be used to protect any sensitive disk files with growth capability to urn multiple simulations. The NASA computer engineer developed the prototype on an interoperable programming environment to enable porting to other Numerical Propulsion System Simulation (NPSS) capable operating system environments.

Blaser, Tammy M.↗

32 examples of LLM applications in materials science and chemistry: towards automation, assistants, agents, and accelerated scientific discovery

Abstract Large language models (LLMs) are reshaping many aspects of materials science and chemistry research, enabling advances in molecular property prediction, materials design, scientific automation, knowledge extraction, and more. Recent developments demonstrate that the latest class of models are able to integrate structured and unstructured data, assist in hypothesis generation, and streamline research workflows. To explore the frontier of LLM capabilities across the research lifecycle, we review applications of LLMs through 32 total projects developed during the second annual LLM hackathon for applications in materials science and chemistry, a global hybrid event. These projects spanned seven key research areas: (1) molecular and material property prediction, (2) molecular and material design, (3) automation and novel interfaces, (4) scientific communication and education, (5) research data management and automation, (6) hypothesis generation and evaluation, and (7) knowledge extraction and reasoning from the scientific literature. Collectively, these applications illustrate how LLMs serve as versatile predictive models, platforms for rapid prototyping of domain-specific tools, and much more. In particular, improvements in both open source and proprietary LLM performance through the addition of reasoning, additional training data, and new techniques have expanded effectiveness, particularly in low-data environments and interdisciplinary research. As LLMs continue to improve, their integration into scientific workflows presents both new opportunities and new challenges, requiring ongoing exploration, continued refinement, and further research to address reliability, interpretability, and reproducibility.

Computer Science↗

Precision signal power measurement

Accurate estimation of signal power is an important Deep Space Network (DSN) consideration. Ultimately, spacecraft power and weight is saved if no reserve transmitter power is needed to compensate for inaccurate measurements. Spectral measurement of the received signal has proved to be an effective method of estimating signal power over a wide dynamic range. Furthermore, on-line spectral measurements provide an important diagnostic tool for examining spacecraft anomalies. Prototype equipment installed at a 64-m-diameter antenna site has been successfully used to make measurements of carrier power and sideband symmetry of telemetry signals received from the Mariner Mars 1971 spacecraft.

Winkelstein, R.↗

Fiber optic combiner and duplicator

The investigation of the possible development of two optical devices, one to take two images as inputs and to present their arithmetic sum as a single output, the other to take one image as input and present two identical images as outputs is described. Significant engineering time was invested in establishing precision fiber optics drawing capabilities, real time monitoring of the fiber size and exact measuring of fiber optics ribbons. Various assembly procedures and tooling designs were investigated and prototype models were built and evaluated that established technical assurance that the device was feasible and could be fabricated. Although the interleaver specification in its entirety was not achieved, the techniques developed in the course of the program improved the quality of images transmitted by fiber optic arrays by at least an order of magnitude. These techniques are already being applied to the manufacture of precise fiber optic components.

Source record↗

A report on the USL NASA/RECON project. Part 2: PC-based R and D in support of IS and R applications

This Working Paper Series entry describes the PC R and D development effort initiated as part of the NASA/RECON Project at the University of Southwestern Louisiana. This effort involves the development of a PC-based environment for the prototyping and evaluation of various tools designed to enhance the interaction between scientists and engineers and remote information systems. The design of PC-based tools for the enhancement of the NASA/RECON university-level courses is described as well as the design of a multi-functional PC-based workstation to support access to and processing of information from local, distributed, and remote sources. Course preparation activities are described in a companion report entitled A Report on the USL NASA/RECON Project: Part 1, the Development of a Transportable, University-Level, IS and R Educational Program, by Suzy Gallagher and Martin Granier, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-7.

Dominick, Wayne D.↗

An application generator for rapid prototyping of Ada real-time control software

The need to increase engineering productivity and decrease software life cycle costs in real-time system development establishes a motivation for a method of rapid prototyping. The design by iterative rapid prototyping technique is described. A tool which facilitates such a design methodology for the generation of embedded control software is described.

Johnson, Jim↗

UNIX security in a supercomputing environment

The author critiques some security mechanisms in most versions of the Unix operating system and suggests more effective tools that either have working prototypes or have been implemented, for example in secure Unix systems. Although no computer (not even a secure one) is impenetrable, breaking into systems with these alternate mechanisms will cost more, require more skill, and be more easily detected than penetrations of systems without these mechanisms. The mechanisms described fall into four classes (with considerable overlap). User authentication at the local host affirms the identity of the person using the computer. The principle of least privilege dictates that properly authenticated users should have rights precisely sufficient to perform their tasks, and system administration functions should be compartmentalized; to this end, access control lists or capabilities should either replace or augment the default Unix protection system, and mandatory access controls implementing multilevel security models and integrity mechanisms should be available. Since most users access supercomputing environments using networks, the third class of mechanisms augments authentication (where feasible). As no security is perfect, the fourth class of mechanism logs events that may indicate possible security violations; this will allow the reconstruction of a successful penetration (if discovered), or possibly the detection of an attempted penetration.

Bishop, Matt↗

Coordinating complex problem-solving among distributed intelligent agents

A process-oriented control model is described for distributed problem solving. The model coordinates the transfer and manipulation of information across independent networked applications, both intelligent and conventional. The model was implemented using SOCIAL, a set of object-oriented tools for distributing computing. Complex sequences of distributed tasks are specified in terms of high level scripts. Scripts are executed by SOCIAL objects called Manager Agents, which realize an intelligent coordination model that routes individual tasks to suitable server applications across the network. These tools are illustrated in a prototype distributed system for decision support of ground operations for NASA's Space Shuttle fleet.

Adler, Richard M.↗

Collecting cometary soil samples? Development of the ROSETTA sample acquisition system

In the reference scenario of the ROSETTA CNRS mission, the Sample Acquisition System is mounted on the Comet Lander. Its tasks are to acquire three kinds of cometary samples and to transfer them to the Earth Return Capsule. Operations are to be performed in vacuum and microgravity, on a probably rough and dusty surface, in a largely unknown material, at temperatures in the order of 100 K. The concept and operation of the Sample Acquisition System are presented. The design of the prototype corer and surface sampling tool, and of the equipment for testing them at cryogenic temperatures in ambient conditions and in vacuum in various materials representing cometary soil, are described. Results of recent preliminary tests performed in low temperature thermal vacuum in a cometary analog ice-dust mixture are provided.

Coste, P. A.↗

Automated maneuver planning using a fuzzy logic algorithm

Spacecraft orbital control requires intensive interaction between the analyst and the system used to model the spacecraft trajectory. For orbits with right mission constraints and a large number of maneuvers, this interaction is difficult or expensive to accomplish in a timely manner. Some automation of maneuver planning can reduce these difficulties for maneuver-intensive missions. One approach to this automation is to use fuzzy logic in the control mechanism. Such a prototype system currently under development is discussed. The Tropical Rainfall Measurement Mission (TRMM) is one of several missions that could benefit from automated maneuver planning. TRMM is scheduled for launch in August 1997. The spacecraft is to be maintained in a 350-km circular orbit throughout the 3-year lifetime of the mission, with very small variations in this orbit allowed. Since solar maximum will occur as early as 1999, the solar activity during the TRMM mission will be increasing. The increasing solar activity will result in orbital maneuvers being performed as often as every other day. The results of automated maneuver planning for the TRMM mission will be presented to demonstrate the prototype of the fuzzy logic tool.

Conway, D.↗

Building complex simulations rapidly using MATRIX(x): The Space Station redesign

MSFC's quick response to the Space Station redesign effort last year required the development of a computer simulation to model the attitude and station-keeping dynamics of a complex body with rotating solar arrays in orbit around the Earth. The simulation was written using a rapid-prototyping graphical simulation and design tool called MATRIX(x) and provided the capability to quickly remodel complex configuration changes by icon manipulation using a mouse. The simulation determines time-dependent inertia properties, and models forces and torques from gravity-gradient, solar radiation, and aerodynamic disturbances. Surface models are easily built from a selection of beams, plates, tetrahedrons, and cylinders. An optimization scheme was written to determine the torque equilibrium attitudes that balance gravity-gradient and aerodynamic torques over an orbit, and propellant-usage estimates were determined. The simulation has been adapted to model the attitude dynamics for small spacecraft.

Carrington, C. K.↗

Scalable Performance Environments for Parallel Systems

As parallel systems expand in size and complexity, the absence of performance tools for these parallel systems exacerbates the already difficult problems of application program and system software performance tuning. Moreover, given the pace of technological change, we can no longer afford to develop ad hoc, one-of-a-kind performance instrumentation software; we need scalable, portable performance analysis tools. We describe an environment prototype based on the lessons learned from two previous generations of performance data analysis software. Our environment prototype contains a set of performance data transformation modules that can be interconnected in user-specified ways. It is the responsibility of the environment infrastructure to hide details of module interconnection and data sharing. The environment is written in C++ with the graphical displays based on X windows and the Motif toolkit. It allows users to interconnect and configure modules graphically to form an acyclic, directed data analysis graph. Performance trace data are represented in a self-documenting stream format that includes internal definitions of data types, sizes, and names. The environment prototype supports the use of head-mounted displays and sonic data presentation in addition to the traditional use of visual techniques.

Reed, Daniel A.↗

Trajectory-Based Takeoff Time Predictions Applied to Tactical Departure Scheduling: Concept Description, System Design, and Initial Observations

Current aircraft departure release times are based on manual estimates of aircraft takeoff times. Uncertainty in takeoff time estimates may result in missed opportunities to merge into constrained en route streams and lead to lost throughput. However, technology exists to improve takeoff time estimates by using the aircraft surface trajectory predictions that enable air traffic control tower (ATCT) decision support tools. NASA s Precision Departure Release Capability (PDRC) is designed to use automated surface trajectory-based takeoff time estimates to improve en route tactical departure scheduling. This is accomplished by integrating an ATCT decision support tool with an en route tactical departure scheduling decision support tool. The PDRC concept and prototype software have been developed, and an initial test was completed at air traffic control facilities in Dallas/Fort Worth. This paper describes the PDRC operational concept, system design, and initial observations.

Engelland, Shawn A.↗

The Antarctic Search for Meteorites: A Model for Deep Space Exploration

In an era of shrinking buying power and reduced flight opportunities, NASA must extract the greatest possible value from all sources of insight into the future of human space exploration. Antarctica is one such source. The history of Antarctic exploration has many political and technical parallels with the development of space, and Antarctica's remoteness and harsh climate make it an excellent proxy for space (e.g., [1,2]). Links between exploration of space and of the Antarctic date back to the International Geophysical Year of 1957-1958, which saw both the launch of Sputnik 1 and the establishment of a station at the South Pole. The Antarctic Search for Meteorites (ANSMET) is an annual expedition to the south polar plateau to collect meteorites. Although its intent is not to simulate a space mission, the handful of astronauts who have participated in ANSMET agree that it is very similar to a long-duration space flight. Independently, NASA and other space agencies have simulated deep space exploration missions in "analog" activities at remote field sites on Earth (e.g., [3]). These include NASA Extreme Environment Mission Operations (NEEMO) [4,5], Desert Research And Technology Studies (Desert RATS) [6,7], and the Pavilion Lake Research Project (PLRP or simply Pavilion Lake) [8]. This report focuses on NEEMO, Desert RATS, and PLRP because of the author's firsthand experience with them. Other noteworthy analogs, such as the arctic Haughton Mars Project and the European Space Agency's underground Cooperative Adventure for Valuing and Exercising human behavior and performance Skills (CAVES), are not treated here. NASA analogs often include fully staffed control centers, astronauts serving as crew, and realistic mission timelines lasting one to two weeks. Analogs have provided key insights into system architectures and operational concepts for the future human exploration of deep space. They have pioneered techniques for human communication with significant speed-of-light delays, for conducting spacewalks on natural objects with negligible surface gravity, and for empowering exploration crews to work with reduced dependence on a ground control center. They have field-tested dozens of emerging technologies including spacewalking tools and full-scale prototype vehicles and habitats. They have provided valuable experience for astronauts preparing for their first space flight, and for flown crewmembers who will take command roles on later flights. Some analogs, especially PLRP, have connected observers in the field with science teams in remotely located control centers to produce high-quality, publishable scientific results. The analogs have accomplished all of this at a tiny fraction of the cost of an actual space flight. This report treats ANSMET as space flight analog. The chapter following this introduction describes ANSMET in depth. The report then presents data on logistics and crew considerations that may be useful for developers of future human space exploration missions. It offers detailed comparisons between ANSMET and past, present, and future space flights on the Space Shuttle, the International Space Station (ISS), and a proposed Mars mission. Those comparisons are intended to complement the work of Eppler [2], who compares ANSMET to the Apollo moon flights. This report also compares ANSMET with the Desert RATS, NEEMO, and PLRP analogs. It then presents observations and makes recommendations related to ANSMET's value as a simulated space mission. The report ends with a short conclusion. The remainder of this introductory chapter provides background material to help readers interpret the rest of the report. It gives brief overviews of Space Shuttle and ISS missions along with information on a notional future human flight to Mars. It also presents the general features of three of NASA's space flight "analog" projects. With those points of reference in place, the chapter concludes with an overview of ANSMET.

Love, Stanley G.↗

Spot and Runway Departure Advisor

The Spot and Runway Departure Advisor (SARDA) is a research prototype of a decision support tool for ATC tower controllers to assist in manging and controlling traffic on the surface of an airport. SARDA employs a scheduler to generate an optimal runway schedule and gate push-back - spot release sequence and schedule that improves efficiency of surface operations. The advisories for ATC tower controllers are displayed on an Electronic Flight Strip (EFS) system. The human-in-the-loop simulation of the SARDA tool was conducted for east operations of Dallas-Ft. Worth International Airport (DFW) to evaluate performance of the SARDA tool and human factors, such as situational awareness and workload. The results indicates noticeable taxi delay reduction and fuel savings by using the SARDA tool. Reduction in controller workload were also observed throughout the scenario runs. The future plan includes modeling and simulation of the ramp operations of the Charlotte International Airport, and develop a decision support tool for the ramp controllers.

decision support tool↗

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗