Search NASA⌕ Search

SEARCH · Search NASA

Results for “RAPID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Steady X-ray emission from MXB 1730-335 /the Rapid Burster/

SAS 3 observations of the Rapid Burster, MXB 1730-335, in three energy channels between 1.3 and 12 keV are used to examine temporary enhancements of the steady X-ray flux from that source following very energetic (long) Type II X-ray bursts. It is found that the average steady X-ray enhancement apparently reaches a maximum value corresponding to about 40% of the time-averaged burst flux, that no significant change in the shape of the X-ray spectrum of the enhancement is evident from the data, and that a certain minimum time interval is needed to obtain enhanced steady emission. The enhanced steady X-ray emission is shown to amount to an average steady contribution of about 5% of the time-averaged burst flux. It is concluded that the observed correlation of the onset and termination of the enhancement with the occurrence of Type II bursts strongly supports the earlier suggestion that the Type II bursts from the Rapid Burster are caused by instabilities in the accretion of matter onto a compact object.

Van Paradijs, J.↗
NASA NTRS1980

A sudden-stop vestibulovisual test for rapid assessment of motion sickness manifestations

A sudden-stop vestibulovisual (SSV) test employing a rotating chair centered in a striped cylindrical enclosure is discussed. A subject, with his eyes covered, is accelerated clockwise at 15 degrees per second squared and maintained at this velocity for 30 sec. The chair is then brought to rest within 1.5 sec and remains at rest for 30 sec while physiological parameters and motion sickness symptoms are recorded. The procedure is repeated until a predetermined motion sickness endpoint (slight nausea) is reached or 20 stops have been made. The scores made by 14 subjects in 4 sessions in terms of susceptibility to motion sickness are presented, and the pattern of all scores indicates rates of acquisition and decay of adaptation effects. It is concluded that at sea or in flight training good retention of adaptation is more important than is a rapid rate of acquiring adaptation, but in Spacelab, where early missions will be brief, rapid acquisition is all-important.

Graybiel, A.↗
NASA NTRS1980

A very rapid turning of the plasma-tail axis of comet Bradfield 19791 on 1980 February 6

Schmidt camera photographs of comet Bradfield 19791 obtained at the Joint Observatory for Cometary Research (JOCR) indicate that a rapid change took place in the comet's plasma tail on 1980 February 6. On that date, a sequence of photographs spanning 27.5 minutes shows a 10 deg shift occurring in the plasma-tail axis between the first and last exposures. The speed of this tail-turning event greatly exceeds that of any other known event and even exceeds turning rates for individual tail streamers. An interpretation based on the windsock theory of plasma tails is that the comet entered a region of rapidly changing solar-wind flow direction. While the search for an associated solar-wind event from near-earth spacecraft observations is a future activity, the present analysis shows that a 50 km/s change in the polar component of the solar-wind velocity, from about 30 km/s northward to about 20 km/s southward, would have produced the 10 deg shift in the tail axis.

Brandt, J. C.↗
NASA NTRS1980

The very long type II X-ray bursts from the rapid burster

Two very long type II bursts (greater than 200 sec) from the rapid burster (MXB 1730-335) have been observed on Mar. 3, 1979 UT. Similar long bursts were observed about five months later, in August 1979, by the Japanese satellite Hakucho. This new burst mode is possibly related to the early stage of the turn-on. In this paper, results of the analysis of the bursts from the rapid burster as observed by the SAS 3 X-ray observatory during Mar. 3-5, 1979 are presented.

Basinska, E. M.↗
NASA NTRS1982

Rapid quenching effects in glassy polymers

Using a specially constructed microbalance for hydrostatic weighing, density changes in PVC thin film due to rapid quenching through the glass transition temperature were observed. The more severe the quench, the greater the free volume content. Isobaric volume recovery of PVC was also studied by volume dilatometry. Both show aging of relaxing molecular rearrangements taking place as a linear function of logarithmic aging time at room temperature. Distribution of retardation times and Primak's distributed activation energy spectra were applied to the volume recovery data. The concomitant changes in mechanical properties of PVC after quenching were monitored by tensile creep stress-stran to failure rates. All reflect the presence of excess free volume content due to rapid quenching.

Mcgarry, F. J.↗
NASA NTRS1981

Rapid quenching effects in PVC films

Using a specially constructed microbalance for hydrostatic weighing, density changes in PVC thin films (with no additives, 30-100 micrometers thick), due to rapid quenching (approximately 300 C/sec) through the glass transition temperature, have been observed. The more severe the quench, the greater is the free volume content. Isobaric volume recovery of PVC has also been studied by volume dilatometry. Both show aging of relaxing molecular rearrangements takes place as a linear function of logarithmic aging time at room temperature. Distribution of retardation times and Primak's distributed activation energy spectra have been applied to the volume recovery data. The concomitant changes in mechanical properties of PVC after quenching have been monitored by tensile creep and stress-strain to failure. All reflect the presence of excess free volume content, due to rapid quenching.

Lee, H. D.↗
NASA NTRS1981

The dynamics of a rapidly escaping atmosphere - Applications to the evolution of earth and Venus

A simple model for the rapid escape of a hydrogen thermosphere is presented in order to establish the energy-limited flux of escaping particles. The model assumes that the atmosphere is tightly bound by gravity at the lower boundary, that all the EUV is absorbed in a narrow region where the optical depth is unity, and that the main source of heating is solar EUV. The flux is limited by the amount of EUV energy absorbed, which is in turn controlled by the radial extent of the thermosphere. It is found that, regardless of the amount of hydrogen in the thermosphere, the low temperatures which accompany rapid escape limit its extent and thus constrain the flux. The results are applied to the earth and Venus, showing that the escape of hydrogen from these planets would have been energy-limiting if their primordial atmospheres contained total hydrogen mixing ratios exceeding only a few percent. This conclusion places a constraint on the theory of the origin and evolution of the planets.

Watson, A. J.↗
NASA NTRS1982

Evaluation of methods for rapid determination of freezing point of aviation fuels

Methods for identification of the more promising concepts for the development of a portable instrument to rapidly determine the freezing point of aviation fuels are described. The evaluation process consisted of: (1) collection of information on techniques previously used for the determination of the freezing point, (2) screening and selection of these techniques for further evaluation of their suitability in a portable unit for rapid measurement, and (3) an extensive experimental evaluation of the selected techniques and a final selection of the most promising technique. Test apparatuses employing differential thermal analysis and the change in optical transparency during phase change were evaluated and tested. A technique similar to differential thermal analysis using no reference fuel was investigated. In this method, the freezing point was obtained by digitizing the data and locating the point of inflection. Results obtained using this technique compare well with those obtained elsewhere using different techniques. A conceptual design of a portable instrument incorporating this technique is presented.

Mathiprakasam, B.↗
NASA NTRS1982

Reduction of chromium in Ni-base superalloys through element substitution and rapid solidification processing

The reduction in the use of Cr in Ni base superalloys by the combined approaches of both elemental substitution and rapid solidification processing is studied. The elements Si, Zr, Y and Hf were chosen as potential partial substitutes for Cr in Waspaloy and IN 713LC sine their separate addition to other alloys has previously resulted in enhanced oxidation resistance. The roles of Cr and these replacement elements in determining the microstructure and properties are evaluated. The elements Si, Zr, and Y and Hf are used as partial replacements for Cr in the base superalloys and these resultant alloys are processed using rapid solidification techniques. The mechanical properties and oxidation resistance of the processed materials are evaluated. The microstructure is characterized using state of the art techniques (e.g. analytical transmission electron microscopy), and the mechanism by which these structures are produced is determined.

Fraser, H. D.↗
NASA NTRS1982

Circumstellar material around rapidly rotating B stars. I - Nonemission-line stars

Evidence of low-velocity circumstellar material around a number of rapidly rotating nonemission-line B stars is sought. No evidence is found for circumstellar shell lines in any of the stars observed. If circumstellar material is present, then these results place constraints on the physical properties of the envelope. Furthermore, contamination of interstellar line profiles with circumstellar components in rapidly rotating non-Be stars is, in general, negligible.

Oegerle, W. R.↗
NASA NTRS1983

Rapid distortion of small-scale turbulence by an axisymmetric contraction

The rapid distortion of small-scale turbulence by an axisymmetric internal contracting flow has been investigated. The analysis is an example of the modern version of rapid distortion theory in that the effects of vortex bending and tilting are included. On the axis of symmetry, the classical results are recovered. The longitudinal and lateral velocity components are suppressed and amplified, respectively, with increasing contraction ratio. These effects are enhanced with increasing radial position. The numerical calculations also show that the correlation between the streamwise and radial velocity components increases monotonically with respect to both the radial location and the contraction ratio. The longitudinal and lateral one-dimensional spectra show a shift towards higher and lower wavenumbers, respectively, as the contraction ratio increases. Here, these effects become less pronounced for larger radii. These results also show that the downstream longitudinal integral length scale based on the streamwise velocity as well as the one based on the transverse velocity increase with the radial coordinate.

Hultgren, L. S.↗
NASA NTRS1983

X-ray, radio, and infrared observations of the 'rapid burster' /MXB 1730-335/ during 1979 and 1980

The paper reports partially simultaneous observations of the 'rapid burster' (MXB 1730-335) at X-ray, infrared, and radio wavelengths, covering several hundred hours during 1979 and 1980. None of the authors of this report saw any infrared or radio bursts. On several occasions an absence of infrared bursting was observed during X-ray bursting. On one occasion an absence of X-ray bursting was observed during a radio burst (4.1 GHz) reported by Calla et al. (1979). To date, radio bursts (a total of at least a dozen) have been reported only by Calla et al. (1980). Considering these and other observations summarized here, the reported radio bursts are either unreal or do not bear a simple relation to the X-ray bursts from the 'rapid burster'. The status of the reported infrared bursts also remain ambiguous. Limits to the brightness of any persistent radio source at the position of MXB 1730-335, limits to persistent X-ray emission during an extended X-ray quiet phase, and a measurement of the infrared polarization in the direction of the X-ray source are also reported.

Lawrence, A.↗
NASA NTRS1982

Software simulations of the detection of rapidly moving asteroids by a charge-coupled device

A rendezvous of an unmanned probe to an earth-approaching asteroid has been given a high priority in the planning of interplanetary missions for the 1990s. Even without a space mission, much could be learned about the history of asteroids and comet nuclei if more information were available concerning asteroids with orbits which cross or approach the orbit of earth. It is estimated that the total number of earth-crossers accessible to ground-based survey telescopes should be approximately 1000. However, in connection with the small size and rapid angular motion expected of many of these objects an average of only one object is discovered per year. Attention is given to the development of the software necessary to distinguish such rapidly moving asteroids from stars and noise in continuously scanned CCD exposures of the night sky. Model and input parameters are considered along with detector sensitivity, aspects of minimum detectable displacement, and the point-spread function of the CCD.

Mcmillan, R. S.↗
NASA NTRS1985

Rapid Adhesive Bonding for Metals and Composites

Toroidal induction heater is key element in rapid bonding technique. Rapid adhesive bonding equipment features toroid induction heater for quick bonding of composites and metals. Process avoids damaging composites that cannot withstand high temperatures for long time intervals. Process scaled up for production. Technique suited to bonding of end tabs onto material test specimens.

Stein, B. A.↗
NASA NTRS1983

The Rapidly Moving Telescope: an Instrument for the Precise Study of Optical Transients

The development of a small telescope with a very rapid pointing capability is described whose purpose is to search for and study fast optical transients that may be associated with gamma-ray bursts and other phenomena. The primary motivation for this search is the discovery of the existence of a transient optical event from the known location of a gamma-ray bursts. The telescope has the capability of rapidly acquiring any target in the night sky within 0.7 second and locating the object's position with + or - 1 arcsec accuracy. The initial detection of the event is accomplished by the MIT explosive transient camera or ETC. This provides rough pointing coordinates to the RMT on the average within approximately 1 second after the detection of the event.

Teegarden, B. J.↗
NASA NTRS1984

Advanced powder metallurgy aluminum alloys via rapid solidification technology

Aluminum alloys containing 10 to 11.5 wt. pct. of iron and 1.5 to 3 wt. pct. of chromium using the technique of rapid solidification powder metallurgy were studied. Alloys were prepared as thin ribbons (.002 inch thick) rapidly solidified at uniform rate of 10(6) C/second by the melt spinning process. The melt spun ribbons were pulverized into powders (-60 to 400 mesh) by a rotating hammer mill. The powders were consolidated by hot extrusion at a high reduction ratio of 50:1. The powder extrusion temperature was varied to determine the range of desirable processing conditions necessary to yield useful properties. Powders and consolidated alloys were characterized by SEM and optical metallography. The consolidated alloys were evaluated for (1) thermal stability, (2) tensile properties in the range, room temperature to 450 F, and (3) notch toughness in the range, room temperature to 450 F.

Ray, R.↗
NASA NTRS1984

The influence of containerless undercooling and rapid solid-state quenching on the superconductive and magnetic properties of some clustering alloy systems

The properties of clustering alloy systems and the manner in which they are influenced by rapid quenching from a containerless undercooled melt are discussed. It was postulated that rapid quenching under such conditions would result in highly disordered metastable alloys, and furthermore, that alloys in such conditions would possess physical properties characteristically different from those of alloys in the annealed equilibrium state. The scope of the program is essentially to gauge the influence of containerless undercooling on the submicrostructure of clustering-type alloys, using certain physical properties as diagnostic tools. Microstructures and macrostructures were to be examined using optical- and scanning-electron microscopy.

Collings, E. W.↗
NASA NTRS1984

Rapid solidification via melt spinning - Equipment and techniques

One of the simpler methods available to accomplish rapid solidification processing is free jet melt spinning. With only a modest expenditure of time, effort, and capital, an apparatus suitable for preliminary experimentation can be assembled. Wheel and crucible materials, process atmospheres, crucible design, heating methods, and process parameters and their relationship to melt composition are described. Practical solutions to processing problems, based on 'hands-on' experience, are offered. Alloys with melting points up to 3000 F have been rapidly solidified using the techniques described.

Jech, R. W.↗