SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This project purchased equipment to advance hydrogen technology research at the University at Buffalo. The equipment is installed in laboratories in the Departments of Chemical and Biological Engineering (CBE) and Materials Design and Innovation (MDI) at the University at Buffalo (UB).
Solar heating and cooling systems employ coatings to increase efficiency. Designers want a coating which absorbs solar heat to the maximum extent possible with minimal emittance of infrared radiation, which occurs when the collector plate gets hot. The coating is important because too much coating causes energy loss by emittance, too little reduces the collector's ability to absorb heat. NASA's Lewis Research Center, which conducts solar energy research, saw a need for a simple means of testing coating samples for emittance. Such equipment is available to research laboratories, but it is complex and expensive
It is essential for the U.S. nuclear energy community to have access to world-leading equipment suitable for conducting research on both nuclear fuels and structural materials, including neutron irradiated–and therefore activated–materials. To address future research infrastructure requirements to support the DOE-NE mission, the Office of Reactor Fleet and Advanced Reactor Deployment established an ad hoc committee to gather information on potential capability gaps for radioactive materials and radiation effects research. This document summarizes the discussions of the committee addressing the high-level challenges in irradiated and radioactive materials research and the capabilities needed to address these challenges. After considering the various needs, the committee agreed on the four top-level targets and priority capability gaps.
The current understanding of the effects of ground proximity on V/STOL and STOL aircraft is reviewd. Areas covered include (1) single jet suckdown in hover, (2) fountain effects on multijet configurations, (3) STOL ground effects including the effect of the ground vortex flow field, (4) downwash at the tail, and (5) hot gas ingestion in both hover and STOL operation. The equipment needed for large scale testing to extend the state of the art is reviewed and developments in three areas are recommended as follows: (1) improve methods for simulating the engine exhaust and inlet flows; (2) develop a model support system that can simulate realistic rates of climb and descent as well as steady height operation; and (3) develop a blowing BLC ground board as an alternative to a moving belt ground board to properly simulate the flow on the ground.
Explore the source record for details and available documents.
In post-crash situations, passengers, bystanders, and first responders are exposed to the immediate safety risks of stranded energy in electric vehicle (EV) batteries. Stranded energy is the energy remaining inside any undamaged or damaged battery following an accident. A potentially damaged battery with an unknown state of safety might go into thermal runaway in the absence of proper monitoring, diagnostics, controls, and handling—thereby leading to potential loss of life and property damage. Therefore, it is imperative to develop standard guidelines, diagnostic methods, and tools to handle stranded energy appropriately and minimize safety risks from immediately after an EV accident to final disposal or re-entry to the road. This perspective paper identifies the challenges associated with handling stranded energy and proposes some potential solution pathways. Further, we hope to draw attention of the research and development community, original equipment manufacturers, and policymakers for motivating new insights and research needs in mitigating safety implications associated with stranded energy.
This bibliography lists 341 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1980. Abstracts on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems are presented. Research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles are also presented.
This bibliography lists 347 reports, articles and other documents introduced into the scientific and technical information system. Documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated compounds, equipment, and systems are included. Research and development in aerodynamics, aeronautics and ground support equipment for aeronautical vehicles are also included.
The Radiochemical Processing Laboratory Life Extension Plan (RPL-ELP) is a collection of independent projects that enable the life extensions of the Radiochemical Processing Laboratory to provide continuous, safe, and secure research operations in support of Department of Energy missions. The ELP includes facility infrastructure upgrades, laboratory and equipment upgrades, and increased research capacity through conversion of existing spaces to the current Pacific Northwest National Laboratory (PNNL) standards. This communications plan is a living document that outlines the goals, target audiences and objectives, key messages, communications opportunities, and tactics for those communications products. This plan will help to make sure communications are coordinated and consistent. Periodically, PNNL will review the communications plan to make sure it addresses current needs of the RPL-ELP.
An overview is given of the definition of research requirements and derivation of engineering design requirements for a group of 77 representative applications of space processing. Representative requirements are documented for applied research in space on biological processes, chemical/fluid phenomena, solidification processes, and glass/ceramics processes. Design requirements for payload equipment to accommodate these research requirements are presented in engineering terms, such as power requirements, schematic diagrams, etc. In addition, a summary of the 77 applied research topics is included.
Aerospace medical and bioengineering considerations in M-2 lifting body research vehicle, discussing protective equipment, escape and medical monitoring systems
Industrial control systems (ICS) networks are undergoing constant shifts to accommodate new security measures. It is challenging to test varying network configurations and security tools with physical systems as they typically include large, expensive equipment. Not only this, but researchers often do not have access to this type of equipment for development of new security tools and techniques. As a solution to these issues, this work presents a set of tools for utilizing GNS3 and Docker as a virtual ICS network. Additionally, the virtual network can be attached to physical devices including network switches, hardware simulations, and intelligent electronic devices (IEDs). Two case studies showcase a relatively complex automatically generated network and an attack on a simple ICS network with an example mitigation.
We stand at the brink of an extraordinary transformation in the field of AI, driven by the convergence of generative AI and semantic technologies (e.g., knowledge graphs). This fusion holds immense potential and could redefine the future of scientific exploration, particularly in the realm of life sciences research. In this context, we shed light on the pivotal roles that Large Language Models (LLMs) and semantic technologies will play in advancing research, unearthing and comprehending life sciences information through innovative approaches, and empowering researchers to extract insights from NASA's extensive Life Sciences Data Archive. Within the NASA Life Sciences Portal (NLSP), the integration of LLMs and semantic technologies unlocks several advanced capabilities. First and foremost, it equips scientists with sophisticated tools to manage the ever-expanding wealth of scientific literature and data. Furthermore, it facilitates the creation of knowledge graphs that visually represent intricate relationships among biological entities, enabling comprehensive systems-level analysis. Additionally, the fusion of generative AI (including LLMs) and semantic technology can significantly benefit NASA's life sciences research by enhancing information retrieval and hypothesis generation. These tools enhance natural language understanding, facilitating knowledge discovery within NLSP. The overarching vision is to establish a cohesive knowledge ecosystem within NLSP, harnessing the power of LLMs and semantic technologies to synthesize and cross-reference data from diverse missions, disciplines, and research domains. This holistic approach ultimately deepens our understanding of how space environments impact life sciences data. To advance this initiative, we have launched LSKnowledge, aimed at enhancing the information retrieval capabilities of NLSP. In the short term, our primary goal is to develop a robust semantic search system. This system will empower HRP (Human Research Program) researchers to navigate NLSP data repositories more efficiently and precisely, catalyzing the process of hypothesis formation and scientific breakthroughs. To achieve this, we have employed pre-trained LLMs as part of a semantic search tool that can rank and highlight the most relevant records for user queries. To assess the tool's performance, we have curated a set of approximately 200 queries from subject matter experts (SMEs) and manually ranked the top records retrieved by both the current search system and the new semantic search, using SME judgments as the gold standard for relevancy. Herein, we present the results of our comparative analysis and illustrate how these findings have informed the fine-tuning of the system for enhanced performance. In the long term, our objectives include 1) retrieving publicly available information and integrating it with NLSP data to provide more precise answers to user queries, and 2) incorporating non-textual information from the NLSP database into our approach. In conclusion, the fusion of LLMs and semantic technologies within NLSP represents a pioneering stride towards reshaping the landscape of scientific discovery. This synergy not only equips researchers with powerful tools to navigate the burgeoning sea of information but also facilitates a deeper understanding of complex biological relationships, all while accelerating hypothesis generation and knowledge discovery. Through our initiative, LSKnowledge, we are committed to continually refining and expanding these capabilities, with the aim of not only enhancing information retrieval but also integrating diverse data sources to provide more precise insights. In the grand vision, NLSP strives to become the cornerstone of a comprehensive knowledge ecosystem, unraveling the enigmatic intricacies of life sciences phenomena in the context of space environments.
The long-term success of HEP lies in expanding inclusiveness beyond national labs and academic research institutions to a vast community of predominantly undergraduate institutions (PUI) and community colleges (CC). Institutions such as PUIs and CCs offer an early starting point in the pipeline that can mitigate issues of lack of diversity and underrepresented participation of different groups in HEP. However, there are many underlying systemic, structural, and cultural challenges that need to be addressed collectively. Experimental collaborations are largely populated by national labs and research-focused academic institutions (non-PUIs). The faculty at PUIs and CCs have a high teaching load that is detrimental to their research participation. In addition, there is a lack of guidance, access, and tough competition for securing research funding. The students also suffer from a lack of research infrastructure and technical equipment that can only be found at national labs and larger universities. There are existing successful efforts to enhance the HEP research experience of students and faculty members. This paper discusses ways to leverage these to provide more research opportunities and establish a sustainable national program targeting specifically the issues faced by communities at PUIs and CCs. The need for research mentoring and skill building for faculty members is also laid out. The changes discussed in this paper would make a direct impact on the current spectrum of challenges.
In 1994, the National Aeronautics and Space Administration issued a Cooperative Agreement (CA) to the State of Louisiana, through the Louisiana Board of Regents (BOB), for the performance of scientific research under the Experimental Program to Stimulate Competitive Research (EPSCoR) Project. Originally constructed as a three-year program with an optional two-year follow on, this federal-state partnership culminated on 31 October 2001, including two CA extensions. The total value of the project reached $3.3M in NASA funding, matched by $2.75M in BOB funds, and supplemented by several million dollars in institutional contributions. Three Research Clusters comprised the state-wide research effort coupled with scientific/technical management and a teacher involvement component. The three research clusters addressed the Enterprises of Space Science, Earth Science and Aerospace Technology with research in High Energy Astrophysics, the Global Carbon Cycle, and Propulsion. Ten universities, over two dozen faculty, over 150 students and numerous support personnel were involved. All of the scientific and technical objectives were met or exceeded. In aggregate, the clusters generated about $18M in outside support, better than a 2:1 return on investment (better than 5:1 considering only the NASA investment). Moreover, two of the clusters have advanced to the level of applying for major NSF research center designation. This project was a trial of the model of building research infrastructure through mentoring. While not completely successful, the results at the smaller institutions were, none the less, positive. Faculty were engaged in major research and involved their students. Administrations improved their capabilities to handle grants and contracts. Faculty release time was granted, research space was provided and, in some cases, equipment was made available for the research. Some of the faculty at these schools have remained involved in research and/or formed collaborations for new endeavors, demonstrating that the mentoring model can be successful.
The instrumentation discussed in the present paper was developed to ensure reliable operation for a 2.5-meter cryogenic high-Reynolds-number fan-driven transonic wind tunnel. It will incorporate four CPU's and associated analog and digital input/output equipment, necessary for acquiring research data, controlling the tunnel parameters, and monitoring the process conditions. Connected in a multipoint distributed network, the CPU's will support data base management and processing; research measurement data acquisition and display; process monitoring; and communication control. The design will allow essential processes to continue, in the case of major hardware failures, by switching input/output equipment to alternate CPU's and by eliminating nonessential functions. It will also permit software modularization by CPU activity and thereby reduce complexity and development time.
This is a preliminary report of ongoing research that has identified 1,125 tasks that are likely to be performed during initial human expeditions to Mars. The purpose of the report is to facilitate immediate access to the task inventory by researchers whose efforts might benefit from concrete examples of the work that will likely be performed by the first human explorers of Mars and the tasks for which crew members must be prepared to perform in response to emergencies. The research that led to the task lists is being conducted under Cooperative Agreement NNX15AW34G / NNX16AQ86G for the Human Factors and Behavioral Performance Element, Human Performance Program, NASA’s Johnson Space Center. The study is ongoing and will conclude with a final report that documents all research activities and presents the results of task and ability analyses and the implications of study results to crew size and composition, personnel selection and training, and design of equipment and procedures. The research addresses the Risk of Inadequate Mission, Process, and Task Design and the Risk of Performance Errors Due to Training Deficiencies by identifying the work that will be performed during an expedition to Mars and the abilities, skills, and knowledge that will be required of crew members. The study began by developing the comprehensive inventory of 1,125 tasks that are likely to be performed during the 12 phases of initial human expeditions to Mars, from launch to landing 30 months later. This full-mission task inventory was generated by a comprehensive review of documentation and concepts of operations with the understanding that plans and tasks might change in response to continuing technological development. Note: This interim report includes no discussion of analyses and has been prepared solely to facilitate dissemination of the task lists to others whose research might benefit from detailed information about the work and other activities that are likely to be performed during the human exploration of Mars.
Previous research has shown that microorganisms and potential human pathogens have been detected on the International Space Station (ISS). The potential to introduce new microorganisms occurs with every exchange of crew or addition of equipment or supplies. Previous research has shown that microorganisms introduced to the ISS are readily transferred between crew and subsystems and back (i.e. ECLSS, environmental control and life support systems). Current microbial characterization methods require enrichment of microorganisms and a 48-hour incubation time. This increases the microbial load while detecting a limited number of microorganisms. The culture based method detects approximately 1-10% of the total organisms present and provides no identification, To identify and enumerate ISS samples requires that samples to be returned to Earth for complete analysis. Therefore, a more expedient, low-cost, in-flight method of microbial detection, identification, and enumeration is warranted. The RAZOR EX, a ruggedized, commercial off the shelf, real-time PCR field instrument was tested for its ability to detect microorganism at low concentrations within one hour. Escherichia coli, Salmonella enterica Typhimurium, and Pseudomonas aeruginosa were detected at low levels using real-time DNA amplification. Total heterotrophic counts could also be detected using a 16S gene marker that can identify up to 98% of all bacteria. To reflect viable cells found in the samples, RNA was also detectable using a modified, single-step reverse transcription reaction.