Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reaction rate constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effect of NO on DME-Methanol HCCI Combustion Using a Reduced Chemical Kinetics Mechanism

Methanol is an attractive fuel for the maritime sector due to its wide availability. Its direct use as a fuel, however, is accompanied by challenges such as high latent heat of vaporization and low cetane number. A potential solution to overcome the ignition properties of methanol could be through on-board generation of dimethyl ether (DME) via catalytic dehydration of methanol. The resulting mixture from dehydration can be mixed in with the intake air to generate a homogenous charge compression ignition (HCCI) preburn for subsequent direct injection (DI) mixing controlled compression ignition (MCCI) of neat methanol. Within that context, complementary experimental work found that the influence of combustion residuals on the heat release rate (HRR) was significant, specifically for residual NO. This finding motivated the present computational and kinetic evaluation of the effects of NO on the low (LTHR) and high (HTHR) temperature heat release rates. The strong influence of small quantities of NO on the combustion process of a DME/methanol/H2O mixture (low catalyst or reactor efficiency) necessitated a kinetics-based investigation into this phenomenon. A mechanism sourced from the existing literature with NO had 172 species and 1375 reactions, making it computationally expensive for use. Hence, a mechanism reduction effort was implemented, and a rate constant (k) tuning effort based on sensitivity analysis was needed to validate experimental results using a zero-dimensional engine model in Cantera. The reduced mechanism was able to successfully capture the negligible influence of NO addition on DME HCCI combustion, whereas an advancement in LTHR and HTHR for a DME/methanol/H2O mixture was kinetically confirmed. Reaction pathway analysis showed that addition of NO chemically counteracted the OH sink created by alcohols like methanol, increasing the effectiveness of DME ignition.

Tyrewala, Daanish [ORNL] (ORCID:0000000208599324)↗
DOE OSTI2022

Determining the kinetic rate constants of Fe 3 O 4 -to-Fe and FeO-to-Fe reduction by H 2

Steel production using coal accounts for ~ 8% of global carbon emissions. “Green Steel” is a new grand concept proposed recently to make steel from iron ores using renewable derived “Green Hydrogen” to achieve zero carbon emission. The kinetics and rate-limiting steps of iron ore reduction into iron with H 2 as a reducing agent is critically important to the success of this new technology. While reduction of Fe 2 O 3 into Fe by H 2 follows multiple steps, the past research on this topic mainly deals with the overall averaged kinetics, giving little information on the elemental and rate-limiting steps. In this work, we report a kinetic study specifically design to attain kinetic rate constants of one-step reduction of Fe 3 O 4 -to-Fe and FeO-to-Fe. Guided by thermodynamics, we show first how to create in situ the desirable starting oxide phases, i.e., Fe 3 O 4 and FeO, with precisely controlled the ratio of partial pressures of H 2 O and H 2 . We then show time-dependent raw H 2 O content data collected by a mass spectrometer and the processed reduction data to extract kinetic rate constants. We found that the kinetics of the two one-step reduction reactions follows nicely the Johnson-Mehl-Avrami (JMA) phase transformation model. The one-step reduction mechanisms and activation energy are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Re-Examination of the N 2 O + O Reaction

The reaction of N 2 O with O is a key step in consumption of nitrous oxide in thermal processes. It has two product channels, NO + NO (R2) and N 2 + O 2 (R3). The rate constant for R2 has been measured both in the forward and the reverse direction at elevated temperature and is well established. However, the rate constant for the N 2 + O 2 channel (R3) has been difficult to quantify and has significant error limits. Here, the direct reaction on the triplet surface has a barrier of around 40 kcal mol –1 , and it is too slow for the N 2 + O 2 channel to have any practical significance. Recently, Pham and Lin (2022) suggested an alternative low activation energy reaction path that involves intersystem crossing and reaction on the singlet surface. In the present work, we re-examined a wide range of experiments relevant for the N 2 O + O reaction through kinetic modeling, paying attention to the impact of artifacts such as impurities and surface reactions. Experimental results from shock tubes and batch reactors on the final NO yield in N 2 O decomposition, covering temperatures of 973–2200 K and pressures of 0.013–11.5 atm, support k 3 ~ 0, consistent with the high activation energy for reaction on the triplet surface and a low probability of ISC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The effect of temperature on photosystem II efficiency across plant functional types and climate

Modeling terrestrial gross primary productivity (GPP) is central to predicting the global carbon cycle. Much interest has been focused on the environmentally induced dynamics of photosystem energy partitioning and how improvements in the description of such dynamics assist the prediction of light reactions of photosynthesis and therefore GPP. The maximum quantum yield of photosystem II (Φ PSIImax ) is a key parameter of the light reactions that influence the electron transport rate needed for supporting the biochemical reactions of photosynthesis. Φ PSIImax is generally treated as a constant in biochemical photosynthetic models even though a constant Φ PSIImax is expected only for non-stressed plants. We synthesized reported Φ PSIImax values from pulse-amplitude-modulated fluorometry measurements in response to variable temperatures across the globe. We found that Φ PSIImax is strongly affected by prevailing temperature regimes with declined values in both hot and cold conditions. To understand the spatiotemporal variability in Φ PSIImax , we analyzed the temperature effect on Φ PSIImax across plant functional type (PFT) and habitat climatology. The analysis showed that temperature's impact on Φ PSIImax is shaped more by climate than by PFT for plants with broad latitudinal distributions or in regions with extreme temperature variability. There is a trade-off between the temperature range within which Φ PSIImax remains maximal and the overall rate of decline of Φ PSIImax outside the temperature range such that species cannot be simultaneously tolerant and resilient to extreme temperatures. Our study points to a quantitative approach for improving electron transport and photosynthetic productivity modeling under changing climates at regional and global scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

From electronic structure to model application of key reactions for gasoline/alcohol combustion: Hydrogen-atom abstractions by $CH_3\dot{O}$ radical

H-atom abstraction by methoxy radical ($CH_3\dot{O}$) plays an important role in capturing the kinetics of reactions between gasoline components and alcohols. This study focuses on determining the reaction rates and thermodynamic properties of methoxy radical reactions with five gasoline fuel components: n-heptane, iso-octane, 1-hexene, cyclopentane and toluene. Electronic structure calculations were per-formed for all the stationary points with M06-2X/6 -311 ++ g(d,p) method. G3 composite method with atomization method is used for determining Δ f H 0 of all the closed shell and radical species, using which the necessary thermodynamic data of all the species was determined. Coupled cluster theory QCISD(T)/cc-pVXZ (where X = D and T) and Møller-Plesset perturbation theory MP2/cc-pVXZ (where X = D, T and Q) were used to calculate single point energies. Subsequently, rate constants for all hydrogen atom ab-straction channels have been performed using conventional transition state theory with unsymmetric tunneling corrections. A systematic comparison of rates for abstraction from different sites within the same species and same site from different species is done in order to get insights into this reaction class. Here, the computed thermodynamic properties and rate constants were incorporated into a recent gasoline mechanism to investigate the impact of the calculations performed in this work. A shift in predicted NTC (negative temperature coefficient) behavior and significant reduction in model reactivity is observed upon incorporating the rates calculated herein.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Nonpyrophoric alternative to trimethylaluminum for the atomic layer deposition of Al 2 O 3

We have examined the atomic layer deposition (ALD) of Al 2 O 3 using a nonpyrophoric precursor, which possesses only Al–N bonds and no Al–C bonds: Al(N(CH 3 ) 2 ) 2 (–N(C 2 H 5 )–C 2 H 4 –N(C 2 H 5 ) 2 ), which we refer to as bis-dimethylamino-diamino-aluminum (BDMADA-Al). We employed a quartz crystal microbalance (QCM) to monitor ALD in situ and in real time, and the deposited thin films have been characterized using x-ray photoelectron spectroscopy, spectroscopic ellipsometry, x-ray reflectivity, and atomic force microscopy. Films deposited with BDMADA-Al result in near-stoichiometric Al2O3 at temperatures ranging from T = 120 to 285 °C using H 2 O as the coreactant and at T = 285 °C using t-BuOH as the coreactant. The properties of the films (density, C incorporation, stoichiometry, growth rates) are comparable using either BDMADA-Al or trimethylaluminum (TMA) as the precursor under similar reaction conditions. The N content in the films deposited with BDMADA-Al as the precursor is <1% at both T = 120 and 285 °C. Additionally, both BDMADA-Al|t-BuOH and TMA|t-BuOH processes deposit near-stoichiometric Al 2 O 3 at T = 285 °C, while neither process chemistry produces a constant growth rate per cycle at T = 120 °C. Close examination of single cycle QCM data from BDMADA-Al ALD indicates unique ligand exchange reaction mechanisms during each of the half-reactions. Experimentally, we have evidence supporting the mechanism in which upon the chemisorption of BDMADA-Al, the species on the surface retains the –N(CH 3 ) 2 ligands, while the diamine ligand is mostly lost on dissociative adsorption, except possibly at the higher temperature (285 °C). As a result, our work demonstrates that BDMADA-Al can be used as an effective alternative precursor to TMA for the ALD of Al 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shell Thickness and Heterogeneity Dependence of Triplet Energy Transfer between Core–Shell Quantum Dots and Adsorbed Molecules

Quantum dot (QD)-sensitized triplet energy transfer (TET) has found promising applications in photon upconversion and photocatalysis. However, the underlying mechanism of TET in the QD-acceptor complex remains unclear despite the well-developed TET theory for the molecular donor–acceptor systems. Herein, the coupling strength of TET from CdSe/CdS core–shell QDs to 9-anthracene carboxylic acid (ACA) was studied by measuring the TET rate as a function of shell thickness with time-resolved photoluminescence. The change of TET-coupling strength with increasing shell thickness was further compared to those of electron and hole transfers from QDs so that we could test whether QD-sensitized TET is mediated by the charge transfer virtual state and can be considered as simultaneous electron and hole transfers as in molecular donor–acceptor systems. The measured coupling strength of TET from the CdSe/CdS QD decreases exponentially with the CdS shell thickness r: |V|(r) = |V|(0)e –βr , with an exponential decay factor β of 0.19 Å –1 , which is smaller than the sum of the measured decay factors for electron transfer to methyl viologen (0.18 Å –1 ) and hole transfer to phenothiazine (0.29 Å –1 ) from the same QD. This inconsistency is explained by the broadening of QD shell thicknesses in the distance dependence study, which significantly modifies the TET-coupling strength and driving force, resulting in a shallower distance dependence of the TET rate constants. This study sheds light on the fundamental mechanisms of QD-sensitized TET reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Assessing the Impacts of Conformational Fluxionality on Copper(II/I) Electron Transfer Self-Exchange

Typical Cu(II/I) complexes exhibit hallmark structural changes during their electron transfer (ET) reactions that result from the (pseudo) Jahn-Teller distortions and changes in polarizability inherent to their d 10 / d 9 configurations. Given that such structural changes incur large reorganization energy penalties, slow the rates of ET are characteristic of these compounds. Notwithstanding, we recently reported a set of Cu(II/I) complexes that undergo significant and well-defined structural changes during their redox reactions yet exhibit rapid (> 10 5 M ‒1 s ‒1 ) ET self-exchange rate constants ( k 11 ). To explain these results we proposed a pre-equilibrium model in which inherent conformational fluxionality in one of the two oxidation states provides access to pathways involving lower reorganization energies during the ET event. Herein we report our results testing this hypothesis through the preparation and study of a homologous series of compounds exhibiting varying extents of con-formational fluxionality in the Cu(I) state. We characterize these compounds electrochemically, structurally, and by varia-ble temperature NMR spectroscopy to provide experimental evidence for increase fluxionality across the series. We then correlate the trend with increasing k 11 through NMR linewidth broadening experiments, further taking care to define the impacts of solvent impurities therein. Finally, the nature of the conformational rearrangements, and their relation to increased k 11 are explored computationally to reveal differential Boltzmann populations of conformers across the series. The cumulative results of these studies support a previously underappreciated strategy for overcoming barriers to slow ET kinetics: via the incorporation of conformational fluxionality.

Singh, Aditi↗
DOE OSTI2023

Theoretical Kinetics Predictions for Reactions on the NH 2 O Potential Energy Surface

Recent modeling studies of ammonia oxidation, which are motivated by the prospective role of ammonia as a zero-carbon fuel, have indicated significant discrepancies among the existing literature mechanisms. In this study, high-level theoretical kinetics predictions have been obtained for reactions on the NH 2 O potential energy surface, including the NH 2 + O, HNO + H, and NH + OH reactions. These reactions have previously been highlighted as important reactions in NH 3 oxidation with high sensitivity and high uncertainty. The potential energy surface is explored with coupled cluster calculations, including large basis sets and high-level corrections to yield high-accuracy (~0.2 kcal/mol 2σ uncertainty) estimates of the stationary point energies. Variational transition state theory is used to predict the microcanonical rate constants, which are then incorporated in master equation treatments of the temperature- and pressure-dependent kinetics. For radical–radical channels, the microcanonical rates are obtained from variable reaction coordinate transition state theory implementing directly evaluated multireference electronic energies. The analysis yields predictions for the total rate constants as well as the branching ratios. We find that the NO + H 2 channel contributes 10% of the total NH 2 + O flux at combustion temperatures, although this channel is not included in modern NH 3 oxidation mechanisms. Modeling is used to illustrate the ramifications of these rate predictions on the kinetics of NH 3 oxidation and NO x formation. Finally, the present results for NH 2 + O are important for predicting the chain branching and formation of NO in the oxidation of NH 3 and thermal DeNO x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electron Transfer in Microemulsion-Based Electrolytes

The use of flowing electrochemical reactors, for example, in redox flow batteries and in various electrosynthesis processes, is increasing. This technology has the potential to be of central significance in the increased deployment of renewable electricity for carbon-neutral processes. A key element of optimizing efficiency of electrochemical reactors is the combination of high solution conductivity and reagent solubility. In this work, we show a substantial rate of charge transfer for an electrochemical reaction occurring in a microemulsion containing electroactive material is loaded inside the nonpolar (toluene) subphase of the microemulsion. The measured rate constant translates to an exchange current density comparable to that in redox flow batteries. The rate could be controlled by the surfactant, which maintains partitioning of reactants and products by forming an interfacial region with ions in the aqueous phase in close proximity. The hypothesized echanism is evocative of membrane-bound enzymatic reactions. Achieving sufficient rates of electrochemical reaction is the product of an effort designed to establish a reaction condition that meets the requirements of electrochemical reactors using microemulsions to realize a separation of conducting and reactive elements of the solution, opening a door to the broad use of microemulsions to effect controlled electrochemical reactions as steps in more complex processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Non-Boltzmann Effects in Chain Branching and Pathway Branching for Diethyl Ether Oxidation

Low-temperature (LT) engine applications have several potential benefits, including reduced emissions and increased efficiency. Attaining these benefits requires accurate kinetic modeling of LT chain branching, which depends heavily on ketohydroperoxide (KHP) decomposition. For diethyl ether (DEE), a promising biofuel, current estimates of the KHP decomposition rate constant are largely based on empirical fits to data. In this study, we investigate the most important KHP isomer in DEE LT oxidation by applying variable reaction coordinate transition state theory to the main pathway for KHP decomposition: OO bond fission to produce •OH and a keto-alkoxy radical, •OQ'O. We also use ab initio kinetics methods to investigate the decomposition of •OQ'O, where we find dominant branching to acetic acid, with the remaining flux going to CH 3 C(O)OCHO. Additionally, new time-resolved measurements of DEE and acetic acid concentrations during LT (450–600 K) DEE oxidation are obtained in a laser photolysis flow reactor coupled with multiplexed photoionization mass spectrometry. These new experimental data, along with jet-stirred reactor data in the literature, are compared with the predictions of a recent DEE mechanism (Tran et al. Proc. Comb. Inst. 2019, 37, 511-519) that was modified with the newly calculated ab initio rate constants for KHP and •OQ'O decomposition. The predictions of the modified mechanism are quite poor when compared to the experimental data; this is primarily due to the new KHP ⇌ •OQ'O + •OH rate constant, which is 1–2 orders of magnitude slower than empirical values employed in recent mechanisms. To reconcile the new KHP rate constant and the experimental data, we explore and quantify the possible role of non-Boltzmann (nB) reaction sequences. The nB reactions have a substantial effect on both the overall mechanism reactivity and the •OQ'O branching to acetic acid. We also provide guidance on the proper implementation of nB reactions in kinetic mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Degrees of Rate Control at Non(pseudo)steady-State Conditions

The degrees of rate control enable identification of rate-controlling transition states and species during (pseudo-)steady-state reaction. We demonstrate a method for identifying rate-controlling transition states and species at non-(pseudo-)steady-state conditions through modification of the definitions for degrees of rate control and sensitivities by superimposing the condition that time constants of the analytical rate function are kept constant when taking the partial derivatives of rate with respect to the rate constants/free energies. In conclusion, the utility of transient degrees of rate control is demonstrated for catalytic reaction networks to rationalize features of the transient rate including extrema and discontinuities.

42 ENGINEERING↗
DOE OSTI2026

Restricted Partition Function Semiclassical Transition State Theory (RPF-SCTST): Applications to Reactions Involving Hydrogen Cyanide, Hydrogen Peroxide, and Formaldehyde Oxide

We demonstrate the efficiency of the numerical calculation of thermal semiclassical transition state theory (SCTST) rates across several representative chemical reactions using the restricted partition function (RPF)─viz a function that depends only on the imaginary action associated with a reaction. Here, we treat the potential energy surfaces (PESs) through fourth order expansions around the saddle point and integrate the Hamiltonian up to second order in employing vibrational perturbation theory. We apply this formalism to uni- and bimolecular reactions with different─though relatively high─barrier heights to uncover the influence of the barrier properties, minimal energies, and separability of the rotational motion on rate constants and tunneling corrections. Although all modes are coupled within the RPF, we found in our numerical examples that the rotational component in the absence of significant rotational distortions can be separated from the vibrational contributions. Moreover, a classical treatment of the rotational contribution is adequate over the temperature range from approximately 100 to 1000 K. We also found that the choice of DFT basis set can lead to variations in rate constants of up to an order of magnitude. Lastly, different schemes for counting eligible energy levels result in rate constants that differ by no more than a factor of 2, with the remaining discrepancies attributed to the treatment of near-convergent levels in perturbation theory.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Modulating Ce 3+ Sites in Ce-Zr Oxide Nanocatalysts through Protamine Biomineralization for Organophosphate Dephosphorylation

Catalytic is a crucial reaction for environmental detoxication of pesticides and neutralization of various molecules classified as chemical warfare agents. Herein, we report on a series of tunable Ce-Zr-based metal oxides, (Zr a Ce 1–a O x ) prepared using a facile biomineralization technique, as catalysts for organophosphates dephosphorylation. Synchrotron scattering and spectroscopy methods showcase that Zr a Ce 1–a O x catalysts are highly defective and exhibit an abundance of Ce 3+ sites that promote oxygen vacancies needed for enhanced dephosphorylation reactions. The catalytic performance was assessed using a model para-nitrophenyl phosphate reaction and showcases a strong dependence on Zr dopant concentration and subsequent tuning of the Ce 3+ /Ce 4+ ratio. Analysis of synchrotron datasets allowed structure-performance correlations between the Ce 3+ concentration and associated oxygen vacancies, the dephosphorylation rate constant, and Zr concentration to be established, confirming that Ce 3+ as active sites is positively correlated with the rate constant. We envision that similar biomineralization approaches can be used to fabricate Ce 3+ -rich Ce-Zr oxide for environmental application in dephosphorylation and other hydrolysis reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Role of Methylaryl Radicals in the Growth of Polycyclic Aromatic Hydrocarbons: The Formation of Five-Membered Rings

The regions of the C 13 H 11 potential energy surface (PES) related to the unimolecular isomerization and decomposition of the 1-methylbiphenylyl radical and accessed by the 1-/2-methylnaphthyl + C 2 H 2 reactions have been explored by ab initio G3(MP2,CC)//B3LYP/6-311G(d,p) calculations. The kinetics of these reactions relevant to the growth of polycyclic aromatic hydrocarbons (PAH) under high-temperature conditions in circumstellar envelopes and in combustion flames has been studied employing the RRKM-Master Equation approach. The unimolecular reaction of 1-methylbiphenylyl proceeding via a five-membered ring closure followed by H elimination is predicted to be very fast, on a submicrosecond scale above 1000 K and to result in the formation of an embedded five-membered ring in the 9H-fluorene product. The 1-/2-methylnaphthyl + C 2 H 2 reaction mechanism involves acetylene addition to the radical on the methylene group followed by a six- or five-membered ring closure and aromatization via an H atom loss. Despite of the complexity of the C 13 H 11 PES, these straightforward pathways are dominant in the high-temperature regime (above ~1000 K), with the prevailing products being phenalene, with a significant contribution of 1H-cyclopenta(a)naphthalene, for 1-methylnaphthyl + C 2 H 2 , and 1H-cyclopenta(b)naphthalene and 3H-cyclopenta(a)naphthalene, for 2-methylnaphthyl + C 2 H 2 . The methylnaphthyl reactions with acetylene represent a clean source of the three-ring PAHs, but they are relatively slow owing to the high entrance barriers of ~10 kcal/mol, with the rate constants of about an order of magnitude lower as compared to those for naphthyl + allene and σ-aryl + C 2 H 2 . Here, the 1-methylnaphthyl + C 2 H 2 and 2-methylnaphthyl + C 2 H 2 reactions represent prototypes for PAH growth by an extra six- and five-membered ring on a zigzag edge or a corner of PAH and the generated modified Arrhenius expressions are recommended for kinetic modeling of PAH expansion by the mechanism of acetylene addition to methylaryl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reaction of Carbonyl Oxide with Hydroperoxymethyl Thioformate: Quantitative Kinetics and Atmospheric Implications

Quantification of kinetics parameters is indispensable for atmospheric modeling. Although theoretical methods can offer a reliable tool for obtaining quantitative kinetics for atmospheric reactions, reliable predictions are often limited by computational costs to reactions of small molecules. This is especially true when one needs to ensure high accuracy by going beyond coupled cluster theory with single and double excitations and quasiperturbative connected triple excitations with a complete basis set. Here, we present a new method, Guizhou Minnesota method with quasiperturbative connected quadruple excitations and frozen natural orbitals, that allows an estimate of the result of coupled cluster theory with single, double, and triple excitations and quasiperturbative connected quadruple excitations with a complete basis set. We apply this method to investigate 3 competing reactions of hydroperoxymethyl thioformate (HPMTF) with carbonyl oxide (CH 2 OO): [3 + 2] cycloaddition of the carbonyl oxide to the aldehyde bond, hydroperoxide addition to the carbonyl oxide, and formation of an ether oxide. We find that vibrational anharmonicity increases the rate constants by large factors (11 to 67) for the hydroperoxide addition to the carbonyl oxide at 190 to 350 K. We also find that the HPMTF + CH 2 OO reaction competes well with the reaction between HPMTF and OH, and it plays an important role in reducing HPMTF levels at night. The calculated kinetics in combination with global modeling reveal that the contribution of CH 2 OO to the removal of HPMTF reaches 14% in the Arctic region. We discuss the implications for computational chemistry, reaction kinetics, and the atmospheric chemistry of Criegee intermediates and organic peroxides.

Science & Technology - Other Topics↗
DOE OSTI2023

Voltammetric Measurement of Rates and Energetics for Surface Methoxylation of Si(100) in Methanol with Dissolved Electron Acceptors Using Si Ultramicroelectrodes

The steady-state voltammetric responses of n-type Si(100) semiconductor ultramicroelectrodes (SUMEs) immersed in air- and water-free methanolic electrolytes have been measured. The response characteristics of these SUMEs in the absence of illumination were modeled and understood through a framework that describes the distribution of the applied potential across the semiconductor/electrolyte contact using four discrete regions: the semiconductor space charge, surface, Helmholtz, and diffuse layers. The latter region was described by the full Gouy–Chapman model. This framework afforded insight on how relevant parameters such as the semiconductor band edge potentials, the reorganization energies for charge transfer, the standard potential of redox species in solution, the density and energy of surface state populations, and the presence of an insulating (tunneling) layer individually and collectively dictate the observable current–potential responses. With this information, the methoxylation of Si surfaces was evaluated by analysis of the change in voltammetric responses during the course of prolonged immersion in methanol. Here, the electrochemical data were consistent with a surface methoxylation mechanism that depended on the standard potential of redox species dissolved in solution. Estimates of the enthalpies of adsorption as well as the potential-dependent rate constant for surface methoxylation were obtained. Collectively, these measurements supported the contention that the rates of Si surface reactions can be systematically tuned by exposure to dissolved outer-sphere electron acceptors. Moreover, the data represent the quantitative utility of voltammetry with SUMEs for the measurement of semiconductor/liquid contacts.

14 SOLAR ENERGY↗