Search NASA⌕ Search

SEARCH · Search NASA

Results for “Redox cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A long-life lithium-oxygen battery via a molecular quenching/mediating mechanism

The advancement of lithium-oxygen (Li-O 2 ) batteries has been hindered by challenges including low discharge capacity, poor energy efficiency, severe parasitic reactions, etc. We report an Li-O 2 battery operated via a new quenching/mediating mechanism that relies on the direct chemical reactions between a versatile molecule and superoxide radical/Li 2 O 2 . The battery exhibits a 46-fold increase in discharge capacity, a low charge overpotential of 0.7 V, and an ultralong cycle life >1400 cycles. Featuring redox-active 2,2,6,6-tetramethyl-1-piperidinyloxy moieties bridged by a quenching-active perylene diimide backbone, the tailor-designed molecule acts as a redox mediator to catalyze discharge/charge reactions and serves as a reusable superoxide quencher to chemically react with superoxide species generated during battery operation. The all-in-one molecule can simultaneously tackle issues of parasitic reactions associated with superoxide radicals, singlet oxygen, high overpotentials, and lithium corrosion. The molecular design of multifunctional additives combining various capabilities opens a new avenue for developing high-performance Li-O 2 batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

The Poor Academic’s DC-Offset for Reversing Polarity in Electrochemical Cells: Application to Redox Flow Cells

We provide a simple and inexpensive manual DC-offset method for extending the accepted voltage range of a battery cycler to negative voltages, without interfering with the actual operation of the electrochemical cell under the test or exceeding the voltage specs of the battery cycler instrument. We describe the working principles of the method and validate the proposed setup by operating short-term and long-term redox flow battery cycling using compositionally symmetric cell, with open-circuit voltage of zero, and full cell configurations. The method can be used to extend the capability of battery cycler instrumentation to operate any electrochemical cell that requires the polarity to be reversed during operation. Applications include cycling of other symmetric cells (e.g., Li-ion cells), implementation of polarity reversal steps for rejuvenation of electroactive species or rebalancing electrochemical cells, and alternating polarity for electrochemical synthesis.

25 ENERGY STORAGE↗
DOE OSTI2023

Ball Milling-Enabled Fe 2.4+ to Fe 3+ Redox Reaction in Prussian Blue Materials for Long-Life Aqueous Sodium-Ion Batteries

Aqueous Na-ion batteries using Prussian blue materials have inherent advantages on safety, material sustainability, and economic cost. However, it is challenging to obtain long term cycling stability because many redox reactions have poor intrinsic stability in water. In this report we demonstrate reversible Fe 2.4+ to Fe 3+ redox reaction of Prussian blue electrodes cycled in 17 m NaClO 4 water-in-salt electrolyte. The cubic phase c-Na 1.17 Fe[Fe(CN) 6 ]·0.35H 2 O) derived from monoclinic Prussian blue (m-Na 1.88 Fe[Fe(CN) 6 ]·0.7H 2 O) through ball milling delivers excellent cycling stability of >18,000 cycles with >90% capacity retention at 10C rate. The specific capacity is ~75 mAh/g and ~67 mAh/g at 1C and 10C rate, respectively. Systematic characterizations including electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy have verified the phase transition and iron oxidation state evolution, revealing the mechanism that enables the material’s high rate and long durability as the battery cathode.

25 ENERGY STORAGE↗
DOE OSTI2026

Manganese Oxidation during Vegetation Burning

Redox recycling of manganese (Mn) plays a key role in organic matter decomposition and nutrient cycling in terrestrial vegetated ecosystems, and it is expected to be changed by fires. This study revealed how Mn is oxidized during vegetation burning, by characterizing the chemical speciation of Mn in fire ash from wildland fires and laboratory burning and evaluating the factors governing its average oxidation state (AOS) and speciation. Manganese in wildland fire ash from different ecosystems showed variable AOS that ranges from 2.5 to 3.3. Laboratory burning experiments showed that Mn oxidation was primarily controlled by fire thermal intensity (temperature × duration) and burning completeness. As heating time increased from 5 min to 5 h at 550 and 700 °C, Mn AOS in the lab-burned vegetation ash increased from 2.7 to 4.0 and the oxidation rate was faster at higher temperature. Diverse Mn species can present in wildland fire ash and differ structurally from biogenic Mn oxides. The oxidized Mn species enable fire ash to mediate oxidative degradation of catechol, demonstrating its potential in mediating organic matter decomposition. This study revealed a new paradigm of Mn redox recycling, as compared to the microbe-mediated Mn redox cycling in the absence of fires.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigating Particle Size‐Dependent Redox Kinetics and Charge Distribution in Disordered Rocksalt Cathodes

Abstract Understanding how various redox activities evolve and distribute in disordered rocksalt oxides (DRX) can advance insights into manipulating materials properties for achieving stable, high‐energy batteries. Herein, the authors present how the reaction kinetics and spatial distribution of redox activities are governed by the particle size of DRX materials. The size‐dependent electrochemical performance is attributed to the distinct cationic and anionic reaction kinetics at different sizes, which can be tailored to achieve optimal capacity and stability. Overall, the local charged domains in DRX particles display random heterogeneity caused by the isotropic delithiation pathways. Owing to the kinetic limitation, the micron‐sized particles exhibit a holistic “core‐shell” charge distribution, whereas sub‐micron particles show more uniform redox reactions throughout the particles and ensembles. Sub‐micron DRX particles exhibit increasing anionic redox activities yet inferior cycling stability. In summary, engineering particle size can effectively modulate how cationic and anionic redox activities evolve and distribute in DRX materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Quantification of Anionic Redox Chemistry in a Prototype Na-Rich Layered Oxide

Harnessing anionic redox reactions is of prime importance for boosting the capacity of sodium-ion batteries (NIBs). However, quantifying the cyclability of anionic redox reactions is still challenging. Herein, we conduct a qualitative and quantitative investigation of the cationic and anionic redox reactions of a prototype Na-rich layered oxide, namely, Na 3 RuO 4 , by a combination of bulk-sensitive X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering. We unequivocally reveal that both Ru cations and oxygen anions are involved in the charge compensation process of Na 3 RuO 4 . Ru redox is highly reversible over extended electrochemical cycles, while the cyclability of lattice oxygen redox gradually decreases with the retention of only 36% after 30 cycles, which is mainly responsible for the capacity fading of Na 3 RuO 4 . Finally, our findings provide deeper insights into the complex oxygen redox mechanism, which plays a decisive role for designing high-energy Na-rich electrode materials for NIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing Active-Site Relocation in Cu/SSZ-13 SCR Catalysts during Hydrothermal Aging by in situ EPR Spectroscopy, Kinetic Studies, and DFT Calculations

Cu/SSZ-13 selective catalytic reduction catalysts display activity loss after mild hydrothermal aging without support degradation or loss of isolated Cu ion content. By applying electron paramagnetic resonance spectroscopy to compare hydrated, dehydrated and NH3-saturated catalysts before and after hydrothermal aging, as well as density functional theory calculations, it is found that hydrothermal aging induces Cu relocation, leading to stronger Cu-support interactions. This is particularly evidenced by ZCuOH conversion to Z2Cu, which leads to the generation of a unique structure with two Cu(II) ions positioned in a double 6-membered ring prism. The Cu(II) ions that do not undergo such dramatic changes also appear to stay closer to framework windows as evidenced by the overall increased anisotropy during EPR measurements. In situ EPR measurements under SCR conditions demonstrate that, in comparison to the fresh catalyst, higher percentages of Cu species stay as Cu(II) in the aged catalyst. This suggests that the reduction half-cycle of the SCR redox, i.e., Cu(II) ? Cu(I), becomes slower for the hydrothermally aged catalyst.

42 ENGINEERING↗
DOE OSTI2020

Exploring the Charge Compensation Mechanism of P2-Type Na 0.6 Mg 0.3 Mn 0.7 O 2 Cathode Materials for Advanced Sodium-Ion Batteries

P2-type sodium layered transition metal oxides have been intensively investigated as promising cathode materials for sodium-ion batteries (SIBs) by virtue of their high specific capacity and high operating voltage. However, they suffer from problems of voltage decay, capacity fading, and structural deterioration, which hinder their practical application. Therefore, a mechanistic understanding of the cationic/anionic redox activity and capacity fading is indispensable for the further improvement of electrochemical performance. Here, a prototype cathode material of P2-type Na 0.6 Mg 0.3 Mn 0.7 O 2 is comprehensively investigated, which presents both cationic and anionic redox behaviors during the cycling process. By a combination of soft X-ray absorption spectroscopy and electroanalytical methods, we unambiguously reveal that only oxygen redox reaction is involved in the initial charge process, then both oxygen and manganese participate in the charge compensation in the following discharge process. In addition, a gradient distribution of Mn valence state from surface to bulk is disclosed, which could be mainly related to the irreversible oxygen activity during the charge process. Furthermore, we find that the average oxidation state of Mn is reduced upon extended cycles, leading to the noticeable capacity fading. Our results provide deeper insights into the intrinsic cationic/anionic redox mechanism of P2-type materials, which is vital for the rational design and optimization of advanced cathode materials for SIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Electrochemical Stability and Reversibility of Aqueous Polysulfide Electrodes Cycled Beyond the Solubility Limit

Batteries which use dissolved redox-active species, such as redox flow batteries (RFBs), are often considered to be constrained in their operation and energy density by the solubility limit of the redox species. Here, we show that soluble redox active electrolytes can be reversibly cycled deeply into the precipitation regime, permitting higher effective concentrations, energy densities, and lower costs. Using aqueous sodium polysulfide negative electrolytes cycled in the nominal Na 2 S 2 to Na 2 S 4 capacity range as an example, we show that the effective solubility can be increased from 5 M in the fully-dissolved state to as much as 10 M using the precipitation strategy. Stable cycling was observed at 8 M concentration over more than 1600h at room temperature. We also analyze the range of polysulfide electrochemical stability, and characterize the precipitate composition. This enhanced effective concentration approach may be generalized to other redox chemistries that utilize solubilized reactants, and may be especially useful for long-duration storage applications where slow charge-discharge rates allow equilibration of precipitated species with the redox-active solution.

25 ENERGY STORAGE↗
DOE OSTI2020

Unexpected mechanism for glucose-primed soil organic carbon mineralization under an anaerobic–aerobic transition

Redox reactions are important for cycling of carbon (C) in soils frequently subject to fluctuations in redox conditions, such as wetland soils, which contribute around one third of the global terrestrial C reservoir. Priming effects (PE), induction of changes in C mineralization due to additions of energy-rich organic carbon (OC) substrates, have been largely ignored during redox transitions in current modelling and experimental efforts for evaluating C cycles. In this study, we investigated the effects of glucose input on the mineralization of soil OC during an anaerobic-aerobic transition. Substantially more soil OC was mineralized under aerobic conditions in samples that received glucose under preceding anaerobic conditions compared to controls that did not receive glucose and to samples that received glucose under aerobic-only conditions. Our results reveal a novel PE by which glucose indirectly primes the mineralization of soil OC by increasing the reductive release of iron oxide-associated OC under anaerobic conditions, followed by a dramatic positive PE when aerobic conditions are reestablished. Inclusion of this novel indirect priming mechanism is crucial for accurately predicting the contribution of atmospheric greenhouse gases from soils experiencing redox fluctuations (e.g.,wetlands).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Integrating Tide‐Driven Wetland Soil Redox and Biogeochemical Interactions Into a Land Surface Model

Abstract Redox processes, aqueous and solid‐phase chemistry, and pH dynamics are key drivers of subsurface biogeochemical cycling and methanogenesis in terrestrial and wetland ecosystems but are typically not included in terrestrial carbon cycle models. These omissions may introduce errors when simulating systems where redox interactions and pH fluctuations are important, such as wetlands where saturation of soils can produce anoxic conditions and coastal systems where sulfate inputs from seawater can influence biogeochemistry. Integrating cycling of redox‐sensitive elements could therefore allow models to better represent key elements of carbon cycling and greenhouse gas production. We describe a model framework that couples the Energy Exascale Earth System Model (E3SM) Land Model (ELM) with PFLOTRAN biogeochemistry, allowing geochemical processes and redox interactions to be integrated with land surface model simulations. We implemented a reaction network including aerobic decomposition, fermentation, sulfate reduction, sulfide oxidation, methanogenesis, and methanotrophy as well as pH dynamics along with iron oxide and iron sulfide mineral precipitation and dissolution. We simulated biogeochemical cycling in tidal wetlands subject to either saltwater or freshwater inputs driven by tidal hydrological dynamics. In simulations with saltwater tidal inputs, sulfate reduction led to accumulation of sulfide, higher dissolved inorganic carbon concentrations, lower dissolved organic carbon concentrations, and lower methane emissions than simulations with freshwater tidal inputs. Model simulations compared well with measured porewater concentrations and surface gas emissions from coastal wetlands in the Northeastern United States. These results demonstrate how simulating geochemical reaction networks can improve land surface model simulations of subsurface biogeochemistry and carbon cycling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Relationship between Sodium Content and Copper Activity for High Voltage Stability in O3-Type Layered Oxide Cathodes

Layered oxides with an O3 framework have attracted attention as cathode materials for sodium-ion batteries due to their high discharge capacity. Yet they are hampered for commercialization by poor cyclability due to structural instability during the sodium (de)intercalation process. The introduction of Cu in small fractions to the transition metal layers has been empirically observed to improve reversible specific capacity and cycling stability. Understanding the redox activity of Cu in O3-type Na x TMO 2 materials is crucial, as it could directly influence the charge compensation mechanism, voltage profile, and structural stability. However, the precise role of Cu in O3-type sodium cathodes under high-voltage cycling conditions (>4.1 V) remains insufficiently understood. To close this gap of knowledge, we studied the effect of Cu in two representative layered oxides with the same O3 stacking but different sodium stoichiometry, Na 0.9 Mn 1/2 Fe 1/3 Cu 1/6 O 2 and NaMn 1/2 Fe 1/3 Cu 1/6 O 2 . X-ray spectroscopy reveals that in Na 0.9 Mn 1/2 Fe 1/3 Cu 1/6 O 2 , Cu exhibits dual redox activity, Cu + /Cu 2+ in the pristine state and Cu 2+ /Cu 3+ upon charging in the sodium-deficient material, whereas only the Cu + /Cu 2+ redox couple is observed in the fully stoichiometric layered oxide. Furthermore, the results indicate that even a slight deficiency in sodium can significantly impact the electrochemical performance and material stability and alter the elemental redox activity of Cu.

Batteries↗
DOE OSTI2024

Halting Oxygen Evolution to Achieve Long Cycle Life in Sodium Layered Cathodes

Oxygen redox chemistries at high voltage have materialized as a revolutionary paradigm for cathodes with high-energy density; however, they are plagued by the challenges of labile oxygen loss and rapid degradations upon cycling, even after concerted endeavors from the research community. Here we propose a multi-concentration stratagem propelled by entropy reinforcement to enhance the electronic structure disorder (ESD) at high desodiation states for impeding undesired oxygen mobility and ensuring controlled oxygen activity, elucidated by density functional theory calculations. The increased disorder strengthens the reversible electrochemistry of lattice oxygen redox, leading to effectively suppressed P−O structural evolution and highly stable localized TMO 6 octahedral environments, as demonstrated by soft/hard X-ray absorption spectroscopy. Furthermore, through a comparative analysis of sodium-layered cathodes with different configuration entropy, we reveal that a high-entropy state induced by cationic disordering has the capacity to perturb cationic redox boundaries, significantly restraining the formation of detrimental O′3 phases. As a consequence, the high-voltage cycling stability has been greatly upgraded, up to 4.4 V versus Na + /Na, with an impressive 90.1 % capacity retention at 1 C over 100 cycles and 76.1 % capacity retention at 2 C over 300 cycles. In conclusion, the resilient oxygen redox, enabled through the control of ESD, broadens the horizons for entropy engineering and lays the foundation for advancements in high-energy, long-cycling, and safe batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Membrane design for non-aqueous redox flow batteries: Current status and path forward

Redox flow batteries are promising technologies for large-scale, long-duration energy storage applications. Among them, non-aqueous redox flow batteries (NARFB) represent a transformative flow battery system since NARFBs potentially offer a higher energy density than aqueous flow batteries. However, many technical challenges remain for NARFBs, including the lack of high-performance membranes, low solubility of redox materials, and poor cycling efficiencies. Membranes serve a vital function in NARFBs, as they allow for selective ion transport while providing separation between the anolyte and catholyte. NARFB membrane development is an emerging research area, and this article reviews their design and critical factors that influence membrane properties, including solvent uptake, ion transport, and redox species permeability. A greater understanding of membrane behavior in non-aqueous solutions provides design principles for developing next-generation membranes for NARFB. In conclusion, we summarize the challenges, target metrics, and future perspectives for NARFBs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Rewiring yeast metabolism for producing 2,3-butanediol and two downstream applications: Techno-economic analysis and life cycle assessment of methyl ethyl ketone (MEK) and agricultural biostimulant production

Rising concerns for sustainability and global climate change have driven the development of sustainable pro- duction pathways for biofuels and chemicals from lignocellulosic biomass via integrated biological and chemical processes. We constructed an engineered Saccharomyces cerevisiae capable of producing 2,3-butanediol (2,3-BDO) from glucose without accumulating ethanol and glycerol, which hinder downstream processing of 2,3-BDO, through extensive metabolic reprogramming. Specifically, we introduced heterologous 2,3-BDO biosynthetic enzymes and deleted the major isozymes of ethanol and glycerol biosynthetic enzymes. In addition, we introduced an NAD + regenerating Pyruvate-Malate (PM) cycle and enhanced the NAD + regenerating capability of the PM cycle to resolve the redox imbalance from the deletion of ethanol and glycerol production pathways. The resulting engineered yeast produced 109.9 g/L of 2,3-BDO with a productivity of 1.0 g/L/h and a yield of 0.36 g/ g glucose in a fed-batch fermentation. We also conducted techno-economic analysis (TEA) and life cycle assessment (LCA) of the production of methyl ethyl ketone (MEK) through catalytic dehydration of 2,3-BDO. A TEA based on the experimental results indicated that the minimum product selling price (MPSP) was estimated to be $1.90/kg. Regarding cradle-to-grave LCA, 100-year global warming potential (GWP100) and fossil energy consumption (FEC) were found to be 0.37 kg CO 2 eq/kg and 3.1 MJ/kg, respectively. These results demonstrated the feasibility of cost-competitive and sustainable bio-based MEK production via yeast fermentation. In addition, we explored the possibility of using the fermentation broth containing 2,3-BDO as a biostimulant inducing drought tolerance in plants. As a result, the yeast 2,3-BDO fermentation broth can induce drought tolerance in Arabidopsis thaliana without a complicated purification process.

2,3-butanediol (2,3-BDO)↗