Search NASA⌕ Search

SEARCH · Search NASA

Results for “Regression approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Standardising the “Gregory method” for calculating equilibrium climate sensitivity

The equilibrium climate sensitivity (ECS) – the equilibrium global mean temperature response to a doubling of atmospheric CO 2 – is a high-profile metric for quantifying the Earth system's response to human-induced climate change. A widely applied approach to estimating the ECS is the “Gregory method” (Gregory et al., 2004), which uses an ordinary least squares (OLS) regression between the net radiative flux, N, and surface air temperature anomalies, ΔT, from a 150 year experiment in which atmospheric CO 2 concentrations are quadrupled. The ECS is determined by extrapolating the linear fit to N=0, i.e. the ΔT-intercept, indicating the point at which the system is back in equilibrium. This method has been used to compare ECS estimates across the CMIP5 and CMIP6 ensembles and will likely be a key diagnostic for CMIP7. Despite its widespread application, there is little consistency or transparency between studies in how the climate model data is processed prior to the regression, leading to potential discrepancies in ECS estimates. We identify 32 alternative data processing pathways, varying by differences in global mean weighting, net radiative flux variable, anomaly calculation method, and linear regression fit. Using 44 CMIP6 models, we systematically assess the impact of these choices on ECS estimates and calculate uncertainty ranges using two bootstrap approaches. While the inter-model ECS range is insensitive to the data processing pathway, individual outlier models exhibit notable differences. Approximating a model's native grid cell area (if irregular) with cosine of the latitude can decrease the ECS by 11 %, the choice of N-variable can change the ECS by 6 %, and some anomaly calculation methods can introduce spurious temporal correlations in the processed data. Beyond data processing choices, we also evaluate an alternative linear regression method – total least squares (TLS) – which has a more statistically robust basis than OLS. However, for consistency with previous literature, and given TLS may reduce the ECS compared to OLS (by up to 24 %), thereby making a known bias in the Gregory method worse, we do not feel there is sufficient clarity to recommend a transition to TLS in all cases. To improve reproducibility and comparability in future studies, we recommend a standardised Gregory method: weighting the global mean by cell area, using the top of the atmosphere (as opposed to the top of model) N-variable, and calculating anomalies by first applying a rolling average to the preindustrial control timeseries then subtracting from the raw CO 2 quadrupling experiment. This approach accounts for model drift while reducing noise in the data to best meet the pre-conditions of the linear regression. While CMIP6 results of the multi-model mean ECS appear insensitive to these processing choices, similar assumptions may not hold for CMIP7, underscoring the need for standardised data preparation in future climate sensitivity assessments.

Geosciences↗
DOE OSTI2022

How Generalizable is a Machine-Learning Approach for Modeling Hub-Height Turbulence Intensity?

Hub-height turbulence intensity is essential for a variety of wind energy applications. However, simulating it is a challenging task. Simple analytical models have been proposed in the literature, but they all come with significant limitations. Even state-of-the-art numerical weather prediction models, such as the Weather Research and Forecasting model, currently struggle to predict hub-height turbulence intensity. Here, we propose a machine-learning-based approach to predict hub-height turbulence intensity from other hub-height and ground-level atmospheric measurements, using observations from the Perdigao field campaign and the Southern Great Plains atmospheric observatory. We consider a random forest regression model, which we validate first at the site used for training and then under a more robust round-robin approach, and compare its performance to a multivariate linear regression. The random forest successfully outperforms the linear regression in modeling hub-height turbulence intensity, with a normalized root-mean-square error as low as 0.014 when using 30-minute average data. In order to achieve such low root-mean-square error values, the knowledge of hub-height turbulence kinetic energy (which can instead be modeled in the Weather Research and Forecasting model) is needed. Interestingly, we find that the performance of the random forest generalizes well when considering a round-robin validation (i.e., when the algorithm is trained at one site such as Perdigao or Southern Great Plains) and then applied to model hub-height turbulence intensity at the other location.

17 WIND ENERGY↗
DOE OSTI2021

Gridded daily weather data for North America with comprehensive uncertainty quantification

Abstract Access to daily high-resolution gridded surface weather data based on direct observations and over long time periods is essential for many studies and applications including vegetation, wildlife, soil health, hydrological modelling, and as driver data in Earth system models. We present Daymet V4, a 40-year daily meteorological dataset on a 1 km grid for North America, Hawaii, and Puerto Rico, providing temperature, precipitation, shortwave radiation, vapor pressure, snow water equivalent, and day length. The dataset includes an objective quantification of uncertainty based on strict cross-validation analysis for temperature and precipitation results. The dataset represents several improvements from a previous version, and this data descriptor provides complete documentation for updated methods. Improvements include: reductions in the timing bias of input reporting weather station measurements; improvement to the three-dimensional regression model techniques in the core algorithm; and a novel approach to handling high elevation temperature measurement biases. We show cross-validation analyses with the underlying weather station data to demonstrate the technical validity of new dataset generation methods, and to quantify improved accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Concordance

Dimension reduction techniques have long been an important topic in statistics, and active subspaces (AS) have received much attention this past decade in the computer experiments literature. The most common approach towards estimating the AS is to use Monte Carlo with numerical gradient evaluation. This software takes a new approach towards estimating the active subspace, in which Multivariate Adaptive Regression Splines (MARS) is used as a surrogate model, and relevant calculation are obtained analytically. Using a MARS surrogate has many advantages including improved scaling, better estimation of active subspaces in high dimensions and the ability to handle a large number of prior distributions in closed form. This software is also capable of conducting a so-called "concordance analysis", using a generalization of ASs which we refer to as "Co-Active" subspaces.

Rumsey, Kelin↗
DOE OSTI2026

Data for Yield from Iowa’s first commercial miscanthus fields: implications of spatial variability for productivity and sustainability beyond research plots

This dataset contains biomass yield measurements and associated vegetation index data collected from commercial Miscanthus × giganteus fields in eastern Iowa during the 2022–2023 growing seasons. The data support the analyses presented in the article: “Yield From Iowa's First Commercial Miscanthus Fields: Implications of Spatial Variability for Productivity and Sustainability Beyond Research Plots.” We collected 105 ground-truth biomass samples from four mature commercial fields (>4 years old) covering 92.81 ha. Samples were taken from 3 m² quadrats that were hand-harvested in alignment with commercial harvest timing. Stem biomass (excluding leaves) was weighed, moisture-corrected, and converted to dry-matter yield expressed in Mg DM ha⁻¹. Sampling locations were selected to capture spatial variability visible in aerial imagery and were recorded using RTK GPS. Each biomass observation was paired with vegetation indices derived from high-resolution PlanetScope satellite imagery (3 m resolution). Images were acquired throughout the growing season, and indices were calculated to evaluate their ability to predict end-of-season biomass yield. Statistical and machine learning approaches were used to identify key predictors, and a linear regression model based on end-of-July Green Normalized Difference Vegetation Index (GNDVI) was developed and evaluated. This repository includes the data used in that modeling workflow. Management practices, economic data, full imagery time series, and additional methodological details are described in the associated publication and are not included here. The dataset consists of three comma-separated value (CSV) files: 1. Combine_Groundtruth_Yield_VI_22_23.csv This file contains ground-truth biomass yield measurements and associated key vegetation index values collected during the 2022 and 2023 growing seasons. Rows: 105 observations Columns: Year — Year of observation (2022 or 2023) Field — Field location identifier Sample_number — Unique sample identifier GNDVI_End_Jul — Green Normalized Difference Vegetation Index calculated at end of July GNDVI_End_Aug — Green Normalized Difference Vegetation Index calculated at end of August NDRE_End_Aug — Normalized Difference Red Edge index calculated at end of August Biomass_Stem_Yield_MgDM/ha — Measured stem biomass yield (megagrams dry matter per hectare) 2. trainData_GNDVI.csv This file contains the subset of observations used to train the predictive relationship between July GNDVI and biomass yield. Rows: 76 observations Columns: Unnamed: 0 — Row index retained from the original data processing workflow GNDVI_End_Jul — GNDVI at end of July Stem_Yield_MgDM/ha — Observed stem biomass yield (Mg DM ha⁻¹) 3. testData_GNDVI.csv This file contains the test dataset used to evaluate model performance. Rows: 29 observations Columns: Unnamed: 0 — Row index retained from the original data processing workflow GNDVI_End_Jul — GNDVI at end of July Predicted_Yield_MgDM/ha — Model-predicted stem biomass yield (Mg DM ha⁻¹) Observed_Yield_MgDM/ha — Measured stem biomass yield (Mg DM ha⁻¹)

Potential yield, yield gap, in-field management, y↗
DOE OSTI2025

Mapping Rare Earths and Toxics in E-Waste via Hyperspectral Imaging and Machine Learning

Electronic waste (e-waste) presents a mounting challenge to environmental sustainability due to its complex composition, which includes high-value rare earth elements, hazardous organic compounds, and non-recyclable plastics. Accurate and scalable material classification is essential for enabling efficient resource recovery and safe recycling practices. This study introduces a confidence-aware classification pipeline that combines mid-infrared hyperspectral imaging (HSI), spectral angle mapping (SAM), and iterative machine learning to perform pixel-level material identification across e-waste devices. A curated spectral library encompassing artificial materials (e.g., plastic iron oxide, galvanized metals), minerals (e.g., allanite, hematite), and organic compounds (e.g., benzanthracene, toluene) was used to generate pseudo-labels, each assigned a confidence score based on SAM-derived spectral similarity. High-confidence samples from seven consumer electronics—digital cameras, keyboards, laptop fans, modems, motherboards, TV remotes, and speakers—were iteratively expanded and classified using models such as Support Vector Machine (SVM), Random Forest, Gradient Boosting Classifier, Partial Least Squares Discriminant Analysis (PLSDA) and Logistic Regression. The best-performing classifiers achieved macro F1 scores approaching 1.0. Results revealed widespread plastic content (dominated by plastic iron oxide), the presence of rare earth-bearing minerals like cerium-containing allanite, and pervasive detection of hazardous organics such as benzanthracene. Principal Component Analysis (PCA) visualizations and confusion matrices confirmed high separability and robust classification performance. This methodology enables precise, non-destructive, and scalable classification of heterogeneous e-waste streams. It supports automated, hazard-aware sorting in recycling workflows, facilitating selective recovery of critical materials and compliance with circular economy goals. The confidence-aware framework provides a foundation for real-time deployment in industrial settings, offering significant implications for smart e-recycling infrastructure and policy-driven material stewardship.

Circular economy↗
DOE OSTI2025

Joint Modeling of Wind Speed and Wind Direction Through a Conditional Approach

Atmospheric near surface wind speed and wind direction play an important role in many applications, ranging from air quality modeling, building design, wind turbine placement to climate change research. It is therefore crucial to accurately estimate the joint probability distribution of wind speed and direction. In this work, we develop a conditional approach to model these two variables, where the joint distribution is decomposed into the product of the marginal distribution of wind direction and the conditional distribution of wind speed given wind direction. To accommodate the circular nature of wind direction, a von Mises mixture model is used; the conditional wind speed distribution is modeled as a directional dependent Weibull distribution via a two-stage estimation procedure, consisting of a directional binned Weibull parameter estimation, followed by a harmonic regression to estimate the dependence of the Weibull parameters on wind direction. A Monte Carlo simulation study indicates that our method outperforms two other approaches in estimation efficiency: one that utilizes periodic spline quantile regression and another that generates data from the commonly used Abe-Ley distribution for cylindrical data. We illustrate our method by using the output from a regional climate model to investigate how the joint distribution of wind speed and direction may change under some future climate scenarios. Our method indicates significant changes in the variation of wind speed with respect to some directions.

17 WIND ENERGY↗
DOE OSTI2020

Tensor Basis Gaussian Process Models of Hyperelastic Materials

In this study, we develop Gaussian process regression (GPR) models of isotropic hyperelastic material behavior. First, we consider the direct approach of modeling the components of the Cauchy stress tensor as a function of the components of the Finger stretch tensor in a Gaussian process. We then consider an improvement on this approach that embeds rotational invariance of the stress-stretch constitutive relation in the GPR representation. This approach requires fewer training examples and achieves higher accuracy while maintaining invariance to rotations exactly. Finally, we consider an approach that recovers the strain-energy density function and derives the stress tensor from this potential. Although the error of this model for predicting the stress tensor is higher, the strain-energy density is recovered with high accuracy from limited training data. The approaches presented here are examples of physics-informed machine learning. They go beyond purely data-driven approaches by embedding the physical system constraints directly into the Gaussian process representation of materials models.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemometrics and Experimental Design for the Quantification of Nitrate Salts in Nitric Acid: Near-Infrared Spectroscopy Absorption Analysis

Implementing remote, real-time spectroscopic monitoring of radiochemical processing streams in hot cell environments requires efficiency and simplicity. The success of optical spectroscopy for the quantification of species in chemical systems highly depends on representative training sets and suitable validation sets. Selecting a training set (i.e., calibration standards) to build multivariate regression models is both time- and resource-consuming using standard one-factor-at-a-time approaches. This study describes the use of experimental design to generate spectral training sets and a validation set for the quantification of sodium nitrate (0–1 M) and nitric acid (0.1–10 M) using the near-infrared water band centered at 1440 nm. Partial least squares regression models were built from training sets generated by both D- and I-optimal experimental designs and a one-factor-at-a-time approach. The prediction performance of each model was evaluated by comparing the bias and standard error of prediction for statistical significance. D- and I-optimal designs reduced the number of samples required to build regression models compared with one-factor-at-a-time while also improving performance. Models must be confirmed against a validation sample set when minimizing the number of samples in the training set. The D-optimal design performed the best when considering both performance and efficiency by improving predictive capability and reducing number of samples in the training set by 64% compared with the one-factor-at-a-time approach. The experimental design approach objectively selects calibration and validation spectral data sets based on statistical criterion to optimize performance and minimize resources.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Revenue prediction for integrated renewable energy and energy storage system using machine learning techniques

Revenue estimation for integrated renewable energy and energy storage systems is important to support plant owners or operators’ decisions in battery sizing selection that leads to maximized financial performances. A common approach to optimizing revenues of a hybrid hydro and energy storage system is using mixed-integer linear programming (MILP). Although MILP models can provide accurate production cost estimations, they are typically very computationally expensive. To provide a fast yet accurate first-step information to hydropower plant owners or operators who consider integrating energy storage systems, we propose an innovative approach to predicting optimal revenues of an integrated energy generation and storage system. In this study, we examined the performance of two prediction techniques: Generalized Additive Models (GAMs) and machine learning (ML) models developed based on artificial neural networks (ANN). Predictive equations and models are generated based on optimized solutions from a market participation optimization model, the Conventional Hydropower Energy and Environmental Resource System (CHEERS) model. The two predicting techniques reduce the computational time to evaluate annual revenue for one set of battery configurations from 3 h to 1 to 4 min per run while also being implementable with significantly less data. The model validation prediction errors of developed GAMs and ML models are generally below 5%; for model testing predictions, the ML models consistently outperform the regression equations in terms of root mean square errors. This new approach allows plant owners, operators, or potential investors to quickly access multiple battery configurations under different energy generation and market scenarios. This new revenue prediction method will therefore help reduce the barriers, and thereby promoting the deployment of battery hybridization with existing renewable energy sources.

13 HYDRO ENERGY↗
DOE OSTI2022

Comparative Study of Wind Energy Potential Estimation Methods for Wind Sites in Togo and Benin (West Sub-Saharan Africa)

The characterization of wind speed distribution and the optimal assessment of wind energy potential are critical factors in selecting a suitable site for wind power plants (WPP). The Weibull distribution law has been used extensively to analyze the wind characteristics of candidate WPP sites, and to estimate the available and deliverable energy. This paper presents a comparative study of five wind energy resource assessment methods as they applied to the context of wind sites in West Sub-Saharan Africa. We investigated three numerical approaches, namely, the adaptive neuro-fuzzy inference system (ANFIS), the multilayer perceptron method (MLP), and support vector regression (SVR), to derive the distribution law of wind speeds and to optimally quantify the corresponding wind energy potential. Next, we compared these three approaches to two well-known Weibull distribution law-based methods: the empirical method of Justus (EMJ) and the maximum likelihood method (MLM). Case study results indicated that the neural network-based methods, ANFIS and MLP, yielded the most accurate distribution fits and wind energy potential estimates, and consequently, are the most recommended methods for the wind sites in Togo and Benin. The orders of magnitude of the root mean squared error (RMSE) in estimating the recoverable energy using ANFIS were, respectively, 10-4 and 10-5 for Lomé and Cotonou, while MLP achieved an RMSE order of magnitude of 10-3 for both sites.

17 WIND ENERGY↗
DOE OSTI2022

Machine Learning with Gradient-Based Optimization of Nuclear Waste Vitrification with Uncertainties and Constraints

Gekko is an optimization suite in Python that solves optimization problems involving mixed-integer, nonlinear, and differential equations. The purpose of this study is to integrate common Machine Learning (ML) algorithms such as Gaussian Process Regression (GPR), support vector regression (SVR), and artificial neural network (ANN) models into Gekko to solve data based optimization problems. Uncertainty quantification (UQ) is used alongside ML for better decision making. These methods include ensemble methods, model-specific methods, conformal predictions, and the delta method. An optimization problem involving nuclear waste vitrification is presented to demonstrate the benefit of ML in this field. ML models are compared against the current partial quadratic mixture (PQM) model in an optimization problem in Gekko. GPR with conformal uncertainty was chosen as the best substitute model as it had a lower mean squared error of 0.0025 compared to 0.018 and more confidently predicted a higher waste loading of 37.5 wt% compared to 34 wt%. The example problem shows that these tools can be used in similar industry settings where easier use and better performance is needed over classical approaches. Future works with these tools include expanding them with other regression models and UQ methods, and exploration into other optimization problems or dynamic control.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Data-Centric Development of Lignin Structure–Solubility Relationships in Deep Eutectic Solvents Using Molecular Simulations

Lignin is a natural source of aromatic chemicals with significant potential as an abundant, renewable feedstock for value-added products. Deep eutectic solvents (DES)–solvents composed of a hydrogen bond donor (HBD) and acceptor (HBA) in varying ratios–have emerged as a highly tunable class of solvents for lignin solubilization. However, the variety of possible DES compositions and limited molecular-scale understanding of lignin solubility makes solvent selection a challenge without laborious trial-and-error experimentation. To address these challenges, we use classical molecular dynamics (MD) simulations to study the interactions of lignin model compounds with various DES–water systems. Quantitative parameters (descriptors) were calculated by postprocessing the MD results and used to train a regression model that predicts experimentally determined solubilities of lignin model compounds. This approach revealed that the most important descriptors of solubility are the system temperature, solute hydrophilicity, and metrics quantifying hydrogen bonding. Maximizing the interactions between solute–HBD (hydrophobic group), water–HBD (hydrophilic group), and water–HBA molecules led to the highest model compound solubility. Our results support a hydrotropic mechanism in which extensive DES–water hydrogen bonding and favorable HBD interactions with the solute promote high solubility. We applied the regression model derived using model compounds to predict the solubility of representative lignin oligomers. The model predicted lignin oligomers’ solubilities in good agreement with experiments, indicating that the simulations of model compounds can be extended to predict the solubility of larger lignin compounds across a range of solvent compositions and temperatures. Furthermore, these findings provide new molecular-scale insight into lignin solubilization mechanisms and a new method for computationally screening potential solvent systems for lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Swan: Data-driven Inference of Stellar Surface Gravities for Cool Stars from Photometric Light Curves

Stellar light curves are well known to encode physical stellar properties. Precise, automated, and computationally inexpensive methods to derive physical parameters from light curves are needed to cope with the large influx of these data from space-based missions such as Kepler and TESS. Here we present a new methodology that we call “The Swan,” a fast, generalizable, and effective approach for deriving stellar surface gravity (logg) for main-sequence, subgiant, and red giant stars from Kepler light curves using local linear regression on the full frequency content of Kepler long-cadence power spectra. With this inexpensive data-driven approach, we recover logg to a precision of ~0.02 dex for 13,822 stars with seismic logg values between 0.2 and 4.4 dex and ~0.11 dex for 4646 stars with Gaia-derived logg values between 2.3 and 4.6 dex. We further develop a signal-to-noise metric and find that granulation is difficult to detect in many cool main-sequence stars (T {sub eff} ≲ 5500 K), in particular K dwarfs. By combining our logg measurements with Gaia radii, we derive empirical masses for 4646 subgiant and main-sequence stars with a median precision of ~7%. Finally, we demonstrate that our method can be used to recover logg to a similar mean absolute deviation precision for a TESS baseline of 27 days. Our methodology can be readily applied to photometric time series observations to infer stellar surface gravities to high precision across evolutionary states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Report for Department of State (DoS) V-Fund Project "Tying Moment Tensor Solutions to Explosive Yield"

The goal of this study was to use U.S. nuclear explosions with known source parameters (yield, depth, shot point material and/or parameters) to determine moment-derived yield estimates. This work has been accomplished by performing full moment tensor solutions using regional network data from the LLNL network, and other regional broadband stations. As part of this study, we have calculated solutions for 130 U.S. nuclear explosions and 12 additional chemical explosions. We then take several approaches to using moment tensors to estimate yield, considering both the full and isotropic moment tensors, doing straight regression analysis on the whole dataset, then successively refining the calibration with additional information about material and overburden. We have also tried a completely new approach of using the seismic moment to help estimate the radiated seismic energy and tying this to yield through a seismic efficiency. Results appear to be promising, but more work might be required to make this more useful in an operational sense.

58 GEOSCIENCES↗
DOE OSTI2024

SRBench++: Principled Benchmarking of Symbolic Regression With Domain-Expert Interpretation

Symbolic regression searches for analytic expressions that accurately describe studied phenomena. The main promise of this approach is that it may return an interpretable model that can be insightful to users, while maintaining high accuracy. The current standard for benchmarking these algorithms is SRBench, which evaluates methods on hundreds of datasets that are a mix of real-world and simulated processes spanning multiple domains. At present, the ability of SRBench to evaluate interpretability is limited to measuring the size of expressions on real-world data, and the exactness of model forms on synthetic data. In practice, model size is only one of many factors used by subject experts to determine how interpretable a model truly is. Furthermore, SRBench does not characterize algorithm performance on specific, challenging sub-tasks of regression such as feature selection and evasion of local minima. In this work, we propose and evaluate an approach to benchmarking SR algorithms that addresses these limitations of SRBench by 1) incorporating expert evaluations of interpretability on a domain-specific task, and 2) evaluating algorithms over distinct properties of data science tasks. We evaluate 12 modern symbolic regression algorithms on these benchmarks and present an in-depth analysis of the results, discuss current challenges of symbolic regression algorithms and highlight possible improvements for the benchmark itself.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Modeling Intercalation Chemistry with Multiredox Reactions by Sparse Lattice Models in Disordered Rocksalt Cathodes

Modern battery materials can contain many elements with substantial site disorder, and their configurational state has been shown to be critical for their performance. The intercalation voltage profile is a critical parameter to evaluate the performance of energy storage. The application of commonly used cluster expansion techniques to model the intercalation thermodynamics of such systems ab initio is challenged by the combinatorial increase in configurational degrees of freedom as the number of species grows. Such challenges necessitate the efficient generation of lattice models without overfitting and proper sampling of the configurational space under the requirement of charge balance in ionic systems. In this work, we introduce a combined approach that addresses these challenges by (1) constructing a robust cluster expansion Hamiltonian using the sparse regression technique, including -norm regularization and structural hierarchy; and (2) implementing semigrand-canonical Monte Carlo to sample charge-balanced ionic configurations using the table-exchange method and an ensemble average approach. These techniques are applied to a disordered rocksalt oxyfluoride (LMNOF) that is part of a family of promising earth-abundant cathode materials. The simulated voltage profile is found to be in good agreement with experimental data and particularly provides a clear demonstration of the and oxygen contributions to the redox potential as a function of content.

25 ENERGY STORAGE↗
DOE OSTI2023

Improving E3SM Land Model Photosynthesis Parameterization via Satellite SIF, Machine Learning, and Surrogate Modeling

The parameterization of key photosynthesis parameters is one of the key uncertain sources in modeling ecosystem gross primary productivity (GPP). Solar-induced chlorophyll fluorescence (SIF) offers a good proxy for GPP since it marks the actual process of photosynthesis; while machine learning (ML) provides a robust approach to model the GPP-SIF relationship. Here, we trained the boosted regressing tree (BRT) and the Random Forest ML models with Greenhouse Gases Observing Satellite SIF data and in situ GPP observations from 49 eddy covariance towers. These trained ML GPP-SIF models were fed into the Energy Exascale Earth System Model (E3SM) Land Model (ELM) to generate ELM-simulated global SIF estimates, which were then benchmarked against satellite SIF observations with a surrogate modeling approach. Our results indicated good modeling performance of the ML-based GPP-SIF relationship. The ELM model when fed with the ML GPP-SIF models also can well predict the spatial-temporal variations in SIF. We also found high model accuracy for the surrogate modeling. Model parameter sensitivity analysis suggested that the fraction of leaf nitrogen in RuBisCO (flnr) is the most sensitive parameter to the SIF; other sensitive parameters include the Ball-Berry stomatal conductance slope (mbbopt) and the vcmax entropy (vcmaxse). The posterior uncertainty in simulated GPP was greatly reduced after benchmarking, and the model produced improved spatial patterns of mean GPP relative to FLUXCOM GPP. Our integrated approach provides a new avenue for improving land models and using remote-sensing SIF, which can be further improved in the future with more ground- and satellite-based observations.

54 ENVIRONMENTAL SCIENCES↗