Search NASA⌕ Search

SEARCH · Search NASA

Results for “Restoration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Microgrid Service Restoration Incorporating Unmonitored Automatic Voltage Controllers and Net Metered Loads

Islanded microgrids may experience voltage and frequency instability due to uncontrolled state changes of voltage regulation devices and inaccurate demand forecasts. Uncontrolled state changes can occur if optimal microgrid restoration and dispatch algorithms, used for generating control commands for distributed energy resources, do not incorporate the behavior of automatic controllers of voltage regulation devices. Inaccurate demand forecasts may be encountered since post-outage demand of behind-the-meter net metered (NM) loads can vary significantly from their historical NM profiles. Here, this paper proposes an optimization formulation which allows optimal control of voltage regulators and capacitor banks without remote control and communication capabilities. A generalized demand model for NM loads is proposed which incorporates the cold load pickup phenomenon and their time varying post-outage demand in accordance with the IEEE 1547 standard. The time dependent optimal control formulation and the NM demand model are integrated in a sequential microgrid restoration algorithm by linearization of the involved logic propositions. A detailed case study on the unbalanced IEEE 123-node test system in OpenDSS validates the effectiveness of the proposed approach.

30 DIRECT ENERGY CONVERSION↗

Deep Reinforcement Learning From Demonstrations to Assist Service Restoration in Islanded Microgrids

Microgrids can be operated in island mode during utility grid outages to support service restoration and improve system resilience. To schedule and dispatch distributed energy resources (DERs) in an islanded microgrid, conventional model-based methods rely on accurate distribution network models and lack generalization and adaptability. Data-driven methods are promising for DER coordination but face practical challenges such as potential hazards to microgrids during online training and insufficient online training opportunities due to low outage rates. This paper presents a novel two-stage learning framework that builds on the deep deterministic policy gradient from demonstrations to identify an optimal restoration strategy. At the pre-training stage, imitation learning is applied to equip the control agent with expert experiences to guarantee acceptable initial performance. At the online training stage, action clipping, reward shaping, and expert demonstrations are leveraged to ensure safe exploration while accelerating the training process. In conclusion, the proposed method is illustrated using the IEEE 123-node system and compared with a representative model-based method and the standard deep deterministic policy gradient method to prove solution accuracy and demonstrate increased computational efficiency.

Du, Yan↗

Silencing of Dicer‐like protein 2a restores the resistance phenotype in the rice mutant, sxi4 ( suppressor of Xa21‐mediated immunity 4 )

SUMMARY The rice immune receptor XA21 confers resistance to Xanthomonas oryzae pv. oryzae ( Xoo ), and upon recognition of the RaxX21‐sY peptide produced by Xoo , XA21 activates the plant immune response. Here we screened 21 000 mutant plants expressing XA21 to identify components involved in this response, and reported here the identification of a rice mutant, sxi4, which is susceptible to Xoo. The sxi4 mutant carries a 32‐kb translocation from chromosome 3 onto chromosome 7 and displays an elevated level of DCL2a transcript, encoding a Dicer‐like protein . Silencing of DCL2a in the sxi4 genetic background restores resistance to Xoo . RaxX21‐sY peptide‐treated leaves of sxi4 retain the hallmarks of XA21‐mediated immune response. However, WRKY45‐1 , a known negative regulator of rice resistance to Xoo , is induced in the sxi4 mutant in response to RaxX21‐sY peptide treatment. A CRISPR knockout of a short interfering RNA (TE‐siRNA815) in the intron of WRKY45‐1 restores the resistance phenotype in sxi4 . These results suggest a model where DCL2a accumulation negatively regulates XA21‐mediated immunity by altering the processing of TE‐siRNA815.

Liu, Furong↗

MPC4CLR (Model-Predictive-Control-for-Critical-Load-Restoration-in-Power-Distribution-Systems) [SWR-22-24]

Model predictive control (MPC) is a system or process control technique for making decisions under uncertainty via rolling look-ahead optimizations at each control step where only the current step decisions are applied, and the rest are discarded. In this work, we developed an MPC for a critical load restoration (CLR) in power distribution systems to recover system service (electricity delivery) following an extreme event-triggered substation outage. The method considers the problem of controlling distributed energy resources (DERs) of the distribution system with the objective of achieving maximum load pick up while satisfying distribution network flow and voltage constraints. A linearized optimal power flow (OPF) model is employed to represent the physics of the network. The problem formulation is augmented with a ramping (up) reserve product for the DERs to ensure improved and upward monotonic load restoration as time evolves. Simulation analysis and performance tests are performed using a modified IEEE 13-bus test feeder integrated with wind, solar, microturbine, and energy storage battery. The software is developed using various software packages in Julia and Python. The MPC model is implemented using the JuMP optimization language in Julia while the data analytics including renewable generation and load demand forecasts, running the MPC simulation and visualizations is performed in Python.

Eseye, Abinet Tesfaye↗

Topography restoration in white-light interferometry using an instrument transfer function evaluated with binary pseudo-random arrays

Accurate knowledge of the instrument transfer function (ITF) is vital for topography measurements using white-light interferometry (WLI). To this end, we derive a complete set of analytical expressions for the power spectral density (PSD) of a discretely sampled binary pseudo-random array (BPRA) as a theoretical benchmark. We then determine the ITF by comparing this theoretical PSD with the measured PSD of the BPRA. For the Zygo ZeGage Pro HR with a objective, the determined ITF closely matches the nominal modulation transfer function (MTF). Accordingly, we integrate the nominal MTF into Fourier-domain restoration filters and apply them to practical WLI topography data, yielding restored topographies that show improved agreement with atomic force microscopy measurements. Overall, our integrated BPRA-based ITF measurement and filtering methodology offers a robust yet practical means of characterizing WLI performance and enhancing the accuracy of surface measurements.

Hirose, Shigenobu [Japan Agency for Marine Earth S↗

AmeriFlux FLUXNET-1F US-HB3 Hobcaw Barony Longleaf Pine Restoration

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-HB3 Hobcaw Barony Longleaf Pine Restoration. This is the FLUXNET version of the carbon flux data for the site US-HB3 Hobcaw Barony Longleaf Pine Restoration produced by applying the standard ONEFlux (1F) software. Site Description - A mixed forest that was clearcut, herbicided and planted in containerized longleaf pine seedlings

Forsythe, Jeremy D.↗

AmeriFlux US-TLR Timberlake Observatory for Wetland Restoration (TOWeR)

This is the AmeriFlux version of the carbon flux data for the site US-TLR Timberlake Observatory for Wetland Restoration (TOWeR). Site Description - This tower is located in Timberlake Forest, a restored forested wetland located 4 km from Albermarle Sound on the North Carolina coast. The forest to the south of the tower had historically been ditched, drained and converted to agricultural land, and subsequently reforested with Black Gum and Cypress trees and naturally re-wetted in 2006. This southern region has a bottomland forest ecosystem which saw a large-scale succession event of pine trees following the reforestation efforts. The northern part of the forest had been ditched, but never drained or converted for other land uses. It is much wetter and more sparsely vegetated when compared to the southern region, and has a mixed bottomland forest and swamp ecosystem.

Rey-Sanchez, Camilo [North Carolina State Universi↗

AmeriFlux BR-ITA MataFLUX: Multi-species tree restoration planting

This is the AmeriFlux version of the carbon flux data for the site BR-ITA MataFLUX: Multi-species tree restoration planting. Site Description - This tower is situated at the Itatinga Research Station (USP-ESALQ), located within the Brazilian Atlantic Forest. The station focuses on promoting forest research and features a landscape consisting of eucalyptus plantations and native species restoration areas.

Guillemot, Joannès [Cirad]↗

AmeriFlux FLUXNET-1F US-UiD University of Illinois Restored Native Prairie

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-UiD University of Illinois Restored Native Prairie. This is the FLUXNET version of the carbon flux data for the site US-UiD University of Illinois Restored Native Prairie produced by applying the standard ONEFlux (1F) software. Site Description - Site harvested annually with a mower during winters starting 2009. No fertilizer was applied, and not irrigated. Measurements were paused on March 23, 2016 and resumed in June 2024.

Bernacchi, Carl↗

Hydrokinetic Power Conversion Using Vortex-Induced Oscillation with Cubic Restoring Force

A cubic-spring restoring function with high-deformation stiffening is introduced to passively improve the harnessed marine hydrokinetic power by using flow-induced oscillations/vibrations (FIO/V) of a cylinder. In these FIO/V experiments, a smooth, rigid, single-cylinder on elastic end-supports is tested at Reynolds numbers ranging from 24,000 < Re < 120,000. The parameters of the tested current energy converter (CEC) are cubic stiffness and linear damping. Using the second generation of digital virtual spring-damping (Vck) controller developed by the Marine Renewable Energy Laboratory (MRELab), the cubic modeling of the oscillator stiffness is tested. Experimental results show the influence of the parameter variation on the amplitude, frequency, energy conversion, energy efficiency, and power of the converter. All experiments are conducted in the low turbulence-free surface water (LTFSW) channel of the MRELab of the University of Michigan. The main conclusions are: (1) The nonlinearity in the cubic oscillator is an effective way to extend the vortex-induced vibration (VIV) upper branch, which results in higher harnessing power and efficiency compared to the linear stiffness cylinder converter. (2) Compared to the linear converter, the overall power increase is substantial. The nonlinear power optimum, occurring at the end of the VIV upper branch, is 63% higher than its linear counterpart. (3) The cubic stiffness converter with low harnessing damping achieves consistently good performance in all the VIV regions because of the hardening restoring force, especially at higher flow velocity.

13 HYDRO ENERGY↗

The restoration of obliterated stamped serial numbers by ultrasonically induced cavitation in water

Seventeen out of 21 obliterated stamped serial numbers on test specimens of copper, brass, steel, and aluminum were successfully restored. Cavitation induced in water by a piezoelectric transducer was the mechanism used. Primarily, smeared metal was removed from the number grooves by the force of the cavitation, however, numbers were also restored at depths at or below the level of the stamped grooves. The feasibility of this technique as a low cost tool for crime laboratories has been clearly demonstrated. The technique is applicable to a variety of materials, and no previous surface or chemical treatments are necessary.

Young, S. G.↗

Experience gained from computer processing of physical experimental data during the restoration of measured values

The processing stage in which the restored values of the physical parameters are received is described. The following main steps are discussed: estimation of the state of the telemetry data, processing of the calibration data, and determination of the errors in the data; data decommutation and analysis of the structure of measurement cycles for each instrument; decoding, estimates of the reliability of the restored data, and their agreement with the models adopted for the measurement process; and analysis of errors due to deterministic and random factors. A block diagram of the method is presented.

Mamotko, Z. N.↗

Restoration of bearings

Process consisting of grinding raceways to oversize but original quality condition and installing new oversize balls or bearings restores wornout ball and roller bearings to original quality, thereby doubling their operating life. Evaluations reveal process results in restoration of 90% of replaced bearings at less than 50% of new-bearing costs.

Parker, R. J.↗

Three-dimensional vector modeling and restoration of flat finite wave tank radiometric measurements

In this paper, a three-dimensional Fourier transform inversion method describing the interaction between water surface emitted radiation from a flat finite wave tank and antenna radiation characteristics is reported. The transform technique represents the scanning of the antenna mathematically as a correlation. Computation time is reduced by using the efficient and economical fast Fourier transform algorithm. To verify the inversion method, computations have been made and compared with known data and other available results. The technique has been used to restore data of the finite wave tank system and other available antenna temperature measurements made at the Cape Cod Canal. The restored brightness temperatures serve as better representations of the emitted radiation than the measured antenna temperatures.

Truman, W. M.↗

Optimum constrained image restoration filters

The research described centered on development of an optimum image restoration filter (IRF) minimizing the radius of gyration of the corrected or composite system point-spread function (P-SF) subject to contraints, and reducing 2-dimensional spatial smearing or blurring of an image. The constraints are imposed on the radius of gyration of the IRF P-SF, the total restored image noise power, and the shape of the composite system frequency spectrum. The image degradation corresponds to mapping many points from the original image into a single resolution element. The P-SF is obtained as solution to a set of simultaneous differential equations obeying nonlinear integral constraints. Truncation errors due to edge effects are controlled by constraining the radius of gyration of the IRF P-SF. An iterative technique suppresses sidelobes of the composite system P-SF.

Riemer, T. E.↗

Low energy, left-right symmetry restoration in SO(N) GUTS

A general n step symmetry breaking pattern of SO(4K+2) down to SU sub C (3)xSU sub L (2)xU sub Y (1), which uses regular subgroups only, does not allow low energy left right symmetry restoration. In these theories, the smallest mass scale at which such restoration is possible is approximately one billion GeV as in the SO(10) case. The unification mass in SO(4K+2) GUTS must be at least as large as that in SU(5). These results assumed standard values of the Weinberg angle and strong coupling constant.

Holman, R.↗

Image restoration of high resolution observations of the M87 jet

Image-restoration techniques are applied to high-resolution (FWHM 0.5-1.0 arcsec) plates of the M87 jet obtained with the CFH telescope by Nieto and Lelievre (1982), and their description of the optical jet is confirmed. Most of the features detected are similar to those shown by the VLA map of Biretta et al. (1982), having a resolution of 0.12 arcsec. In particular, the restored images show evidence for an elongated nucleus and for a very sharp discontinuity in knot A which is not perpendicular to the jet axis. It also seems that the start of the oscillations and this discontinuity are not related. This similarity at a 0.2-arcsec scale suggests no relativistic motion (v less than 25,000 km/sec) throughout the jet.

Lorre, J. J.↗

Restored methane band images of Uranus and Neptune

Charge-coupled device images of Uranus and Neptune taken in the 8900-A absorption band of methane are presented. The images have been digitally processed by means of nonlinear deconvolution techniques to partially remove the effects of atmospheric seeing. The restored Uranus images show strong limb brightening consistent with previous observations and theoretical models of the planet's atmosphere. The computer-processed images of Neptune show discrete cloud features similar to those reported previously by Smith, Reitsema, and Larson (1979). A time series of the restored Neptune images shows a continuous variation which may be due to the planet's rotation.

Heasley, J. N.↗