Search NASA⌕ Search

SEARCH · Search NASA

Results for “Retrieval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

AROTEL Temperature Retrievals Within PSC's Using Raman Scattering

NASA Goddard Space Flight Center's Airborne Raman Ozone Temperature Lidar (AROTEL) made temperature retrievals within Polar Stratospheric Clouds (PSCs) on several flights during the SAGE III Ozone Loss and Validation Experiment (SOLVE) campaign. The location of the PSCs was confirmed using simultaneously acquired data from the NASA Langley Aerosol lidar. Retrievals were made on flight dates 991207, 991210 and 000127 from just above the aircraft to 25 kilometers geometric altitude. Raman temperature retrievals are, to first order, insensitive to Mie interference because the Raman signals are red shifted by 2331 cm(exp -1) from the initial laser wavelength. Backscattering from clouds and aerosols is consequently not observed by the detector; however, extinction does impact the measurement and limits retrievals to optically thin clouds. Comparisons between retrievals employing Rayleigh and Raman scattering show the Raman temperatures to be significantly warmer than those employing Rayleigh scattering. Uncertainties are a function of altitude: at 25 km they were approximately 3 K. Temperature profiles could not be retrieved for optically thick clouds.

Burris, John↗

Inter-Comparison of GOES-8 Imager and Sounder Skin Temperature Retrievals

Skin temperature (ST) retrievals derived from geostationary satellite observations have both high temporal and spatial resolutions and are therefore useful for applications such as assimilation into mesoscale forecast models, nowcasting, and diagnostic studies. Our retrieval method uses a Physical Split Window technique requiring at least two channels within the longwave infrared window. On current GOES satellites, including GOES-11, there are two Imager channels within the required spectral interval. However, beginning with the GOES-M satellite the 12-um channel will be removed, leaving only one longwave channel. The Sounder instrument will continue to have three channels within the longwave window, and therefore ST retrievals will be derived from Sounder measurements. This research compares retrievals from the two instruments and evaluates the effects of the spatial resolution and sensor calibration differences on the retrievals. Both Imager and Sounder retrievals are compared to ground-truth data to evaluate the overall accuracy of the technique. An analysis of GOES-8 and GOES-11 intercomparisons is also presented.

Haines, Stephanie L.↗

Techniques of Validation of Aerosol and Water Vapor Retrievals From MODIS

Aerosols are extremely important for global climate studies and modeling in the quest to characterize the global radiation budget and forcing. The physical characteristics, composition, abundance, and spatial distribution and dynamics of aerosols are still very poorly known. Aerosol column optical thickness and other parameters as well as column precipitable water vapor amount are some of the main atmospheric parameters retrieved from the MODIS instrument on board the Terra satellite. To ensure the reliability of these parameters, we have embarked on a very massive validation effort. This involves cross correlation between the retrievals from the satellite data and those obtained from sunphotometer measurements at a large number of ground stations spread throughout the globe. Notable among these ground stations is a large network of over 100 stations coordinated under the Aerosol Robotic Network (AERONET) project. Whereas MODIS retrieves the aerosol parameters throughout the globe once or twice a day during the daytime, the ground measurements cover only discrete locations of the earth, though the retrievals are done several times a day. We have devised a method to. match the MODIS and ground retrievals through spatial statistics for the MODIS data and temporal statistics for the ground data. This has produced good comparisons and has enabled the validation of MODIS aerosol and water vapor retrievals at over 100 discrete locations in various parts of the earth both over the land and over the ocean. Currently, the validation statistical data is produced routinely by the MODIS aerosol group and is even available not only for validation but also for use by the science community for short and long term studies at various parts of the earth. One important advantage is that the system can be expanded to incorporate more locations where ground measurements and other studies may be conducted at any time during the lifetime of MODIS.

Ichoku, Charles↗

Columnar Aerosol Single-Scattering Albedo and Phase Function Retrieved from Sky Radiance Over the Ocean: Measurements of African Dust

The single-scattering albedo and phase function of African mineral dust are retrieved from ground-based measurements of sky radiance collected in the Florida Keys. The retrieval algorithm employs the radiative transfer equation to solve by iteration for these two properties which best reproduce the observed sky radiance using an assumed aerosol vertical structure and measured aerosol optical depth. Thus, no assumptions regarding particle size, shape, or composition are required. The single-scattering albedo, presented at fourteen wavelengths between 380 and 870 nm, displays a spectral shape expected of iron-bearing minerals but is much higher than current dust models allow. This indicates the absorption of light by mineral dust is significantly overestimated in climate studies. Uncertainty in the retrieved albedo is less than 0.02 due to the small uncertainty in the solar-reflectance-based calibration (12.2%) method employed. The phase function retrieved at 860 nm is very robust under simulations of expected experimental errors, indicating retrieved phase functions at this wavelength may be confidently used to describe aerosol scattering characteristics. The phase function retrieved at 443 nm is very sensitive to expected experimental errors and should not be used to describe aerosol scattering. Radiative forcing by aerosol is the greatest source of uncertainty in current climate models. These results will help reduce uncertainty in the absorption of light by mineral dust. Assessment of the radiative impact of aerosol species is a key component to NASA's Earth System Enterprise.

Cattrall, Christopher↗

A Robust Retrieval of Water Vapor Column In Dry Arctic Conditions Using the Rotating Shadowband Spectroradiometer

A method to retrieve water vapor column using the 940-nm water vapor absorption band in dry Arctic conditions is presented. The retrievals with this method are stable with respect to uncertainties in instrument radiometric calibration, air pressure, solar source function, and aerosols. The water vapor column was retrieved with this method using spectra obtained with the rotating shadowband spectroradiometer (RSS) that was deployed during an intensive observation period near Barrow, Alaska, in March 1999. A line-by-line radiative transfer model was used to compute water vapor transmittance. The retrievals with this method are compared with retrievals obtained from three independent measurements with microwave radiometers. All four measurements show the same pattern of temporal variations. The RSS results agree most closely with retrievals obtained with the millimeter-wave imaging radiometer (MIR) at its 183 GHz +/- 7 double-side band channel. Their correlation over a period of 7 days when water vapor column varied between 0.75 mm and 3.6 mm (according to RSS) is 0.968 with MIR readings 0.12 mm higher on average.

Kiedron, P.↗

Description and Sensitivity Analysis of the SOLSE/LORE-2 and SAGE III Limb Scattering Ozone Retrieval Algorithms

The SOLSE (Shuttle Ozone Limb Sounding Experiment) and LORE (Limb Ozone Retrieval Experiment) instruments are scheduled for reflight on Space Shuttle flight STS-107 in July 2002. In addition, the SAGE III (Stratospheric Aerosol and Gas Experiment) instrument will begin to make limb scattering measurements during Spring 2002. The optimal estimation technique is used to analyze visible and ultraviolet limb scattered radiances and produce a retrieved ozone profile. The algorithm used to analyze data from the initial flight of the SOLSE/LORE instruments (on Space Shuttle flight STS-87 in November 1997) forms the basis of the current algorithms, with expansion to take advantage of the increased multispectral information provided by SOLSE/LORE-2 and SAGE III. We also present detailed sensitivity analysis for these ozone retrieval algorithms. The primary source of ozone retrieval error is tangent height misregistration (i.e., instrument pointing error), which is relevant throughout the altitude range of interest, and can produce retrieval errors on the order of 10-20 percent due to a tangent height registration error of 0.5 km at the tangent point. Other significant sources of error are sensitivity to stratospheric aerosol and sensitivity to error in the a priori ozone estimate (given assumed instrument signal-to-noise = 200). These can produce errors up to 10 percent for the ozone retrieval at altitudes less than 20 km, but produce little error above that level.

Loughman, R.↗

Retrieval of Precipitation Profiles from Multiresolution, Multifrequency, Active and Passive Microwave Observations

In this study, a technique for estimating vertical profiles of precipitation from multifrequency, multiresolution active and passive microwave observations is investigated using both simulated and airborne data. The technique is applicable to the Tropical Rainfall Measuring Mission (TRMM) satellite multi-frequency active and passive observations. These observations are characterized by various spatial and sampling resolutions. This makes the retrieval problem mathematically more difficult and ill-determined because the quality of information decreases with decreasing resolution. A model that, given reflectivity profiles and a small set of parameters (including the cloud water content, the intercept drop size distribution, and a variable describing the frozen hydrometeor properties), simulates high-resolution brightness temperatures is used. The high-resolution simulated brightness temperatures are convolved at the real sensor resolution. An optimal estimation procedure is used to minimize the differences between simulated and observed brightness temperatures. The retrieval technique is investigated using cloud model synthetic and airborne data from the Fourth Convection And Moisture Experiment. Simulated high-resolution brightness temperatures and reflectivities and airborne observation strong are convolved at the resolution of the TRMM instruments and retrievals are performed and analyzed relative to the reference data used in observations synthesis. An illustration of the possible use of the technique in satellite rainfall estimation is presented through an application to TRMM data. The study suggests improvements in combined active and passive retrievals even when the instruments resolutions are significantly different. Future work needs to better quantify the retrievals performance, especially in connection with satellite applications, and the uncertainty of the models used in retrieval.

Grecu, Mircea↗

North Alabama Lightning Mapping Array (LMA): VHF Source Retrieval Algorithm and Error Analyses

Two approaches are used to characterize how accurately the North Alabama Lightning Mapping Array (LMA) is able to locate lightning VHF sources in space and in time. The first method uses a Monte Carlo computer simulation to estimate source retrieval errors. The simulation applies a VHF source retrieval algorithm that was recently developed at the NASA Marshall Space Flight Center (MSFC) and that is similar, but not identical to, the standard New Mexico Tech retrieval algorithm. The second method uses a purely theoretical technique (i.e., chi-squared Curvature Matrix Theory) to estimate retrieval errors. Both methods assume that the LMA system has an overall rms timing error of 50 ns, but all other possible errors (e.g., multiple sources per retrieval attempt) are neglected. The detailed spatial distributions of retrieval errors are provided. Given that the two methods are completely independent of one another, it is shown that they provide remarkably similar results. However, for many source locations, the Curvature Matrix Theory produces larger altitude error estimates than the (more realistic) Monte Carlo simulation.

Koshak, W. J.↗

Retrieval of Hydrometeor Drop Size Distributions from TRMM Field Campaign Profiler Doppler Velocity Spectra Observations

Consistent with the original proposal and work plan, this project focused on estimating the raindrop size distributions (DSDs) retrieved from vertically pointing Doppler radar profilers and analyzing the relationship of the retrieved DSDs with the dynamics of the precipitation processes. The first phase of this project focused on developing the model to retrieve the DSD from the observed Doppler velocity spectra. The second phase used this model to perform DSD retrievals from the profiler observations made during the TRMM Ground Validation Field Campaigns of TEFLUN-B, TRMM-LBA, and KWAJEX. The third phase of this project established collaborations with scientists involved with each field campaign in order to validate the profiler DSD estimates and to enable the profiler retrievals to be used in their research. Through these collaborations, the retrieved DSDs were placed into context with the dynamical processes of the observed precipitating cloud systems.

Williams, Christopher R.↗

A Preliminary ZEUS Lightning Location Error Analysis Using a Modified Retrieval Theory

The ZEUS long-range VLF arrival time difference lightning detection network now covers both Europe and Africa, and there are plans for further expansion into the western hemisphere. In order to fully optimize and assess ZEUS lightning location retrieval errors and to determine the best placement of future receivers expected to be added to the network, a software package is being developed jointly between the NASA Marshall Space Flight Center (MSFC) and the University of Nevada Las Vegas (UNLV). The software package, called the ZEUS Error Analysis for Lightning (ZEAL), will be used to obtain global scale lightning location retrieval error maps using both a Monte Carlo approach and chi-squared curvature matrix theory. At the core of ZEAL will be an implementation of an Iterative Oblate (IO) lightning location retrieval method recently developed at MSFC. The IO method will be appropriately modified to account for variable wave propagation speed, and the new retrieval results will be compared with the current ZEUS retrieval algorithm to assess potential improvements. In this preliminary ZEAL work effort, we defined 5000 source locations evenly distributed across the Earth. We then used the existing (as well as potential future ZEUS sites) to simulate arrival time data between source and ZEUS site. A total of 100 sources were considered at each of the 5000 locations, and timing errors were selected from a normal distribution having a mean of 0 seconds and a standard deviation of 20 microseconds. This simulated "noisy" dataset was analyzed using the IO algorithm to estimate source locations. The exact locations were compared with the retrieved locations, and the results are summarized via several color-coded "error maps."

Elander, Valjean↗

Thermodynamic and cloud parameter retrieval using infrared spectral data

High-resolution infrared radiance spectra obtained from near nadir observations provide atmospheric, surface, and cloud property information. A fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. The retrieval algorithm is presented along with its application to recent field experiment data from the NPOESS Airborne Sounding Testbed - Interferometer (NAST-I). The retrieval accuracy dependence on cloud properties is discussed. It is shown that relatively accurate temperature and moisture retrievals can be achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with an accuracy of approximately 1.0 km. Preliminary NAST-I retrieval results from the recent Atlantic-THORPEX Regional Campaign (ATReC) are presented and compared with coincident observations obtained from dropsondes and the nadir-pointing Cloud Physics Lidar (CPL).

Zhou, Daniel K.↗

The Continuous Monitoring of Desert Dust using an Infrared-based Dust Detection and Retrieval Method

Airborne dust and sand are significant aerosol sources that can impact the atmospheric and surface radiation budgets. Because airborne dust affects visibility and air quality, it is desirable to monitor the location and concentrations of this aerosol for transportation and public health. Although aerosol retrievals have been derived for many years using visible and near-infrared reflectance measurements from satellites, the detection and quantification of dust from these channels is problematic over bright surfaces, or when dust concentrations are large. In addition, aerosol retrievals from polar orbiting satellites lack the ability to monitor the progression and sources of dust storms. As a complement to current aerosol dust retrieval algorithms, multi-spectral thermal infrared (8-12 micron) data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Meteosat-8 Spinning Enhanced Visible and Infrared Imager (SEVIRI) are used in the development of a prototype dust detection method and dust property retrieval that can monitor the progress of Saharan dust fields continuously, both night and day. The dust detection method is incorporated into the processing of CERES (Clouds and the Earth s Radiant Energy System) aerosol retrievals to produce dust property retrievals. Both MODIS (from Terra and Aqua) and SEVERI data are used to develop the method.

Duda, David P.↗

Cloud Optical Depth Retrievals from Solar Background "signal" of Micropulse Lidars

Pulsed lidars are commonly used to retrieve vertical distributions of cloud and aerosol layers. It is widely believed that lidar cloud retrievals (other than cloud base altitude) are limited to optically thin clouds. Here we demonstrate that lidars can retrieve optical depths of thick clouds using solar background light as a signal, rather than (as now) merely a noise to be subtracted. Validations against other instruments show that retrieved cloud optical depths agree within 10-15% for overcast stratus and broken clouds. In fact, for broken cloud situations one can retrieve not only the aerosol properties in clear-sky periods using lidar signals, but also the optical depth of thick clouds in cloudy periods using solar background signals. This indicates that, in general, it may be possible to retrieve both aerosol and cloud properties using a single lidar. Thus, lidar observations have great untapped potential to study interactions between clouds and aerosols.

Chiu, J. Christine↗

Impact of Three-Dimensional Radiative Effects on Satellite Retrievals of Cloud Droplet Sizes

There are several dozen papers that study the effects of cloud horizontal inhomogeneity on the retrievals of cloud optical thickness, but only a few of them deal with cloud droplet sizes. This paper is one of the first comprehensive attempts to fill this gap: It takes a close theoretical look at the radiative effects of cloud 3-D structure in retrievals of droplet effective radii. Under some general assumptions, it was found that ignoring subpixel (unresolved) variability produces a negative bias in the retrieved effective radius, while ignoring cloud inhomogeneity at scales larger than a pixel scale (resolved variability), on the contrary, leads to overestimation of the domain average droplet size. The theoretical results are illustrated with examples from Large Eddy Simulations (LES) of cumulus (Cu) and stratocumulus (Sc) cloud fields. The analysis of cloud drop size distributions retrieved from both LES fields confirms that ignoring shadowing in 1-D retrievals results in substantial overestimation of effective radii which is more pronounced for broken Cu than for Sc clouds. Collocated measurements of broken Cu clouds by Moderate Resolution Imaging Spectrometer (MODIS) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) are used to check simulations and theory with observations. The analysis of ASTER and MODIS data and associated derived products recommends against blindly using retrieved effective radii for broken cloud fields, especially if one wants to relate aerosol amounts to cloud droplet sizes.

Marshak, Alexander↗

Multi-Grid-Cell Validation of Satellite Aerosol Property Retrievals in INTEX/ITCT/ICARTT 2004

Aerosol transport off the US Northeast coast during the Summer 2004 International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) Intercontinental Chemical Transport Experiment (INTEX) and Intercontinental Transport and Chemical Transformation (ITCT) experiments produced a wide range of aerosol types and aerosol optical depth (AOD) values, often with strong horizontal AOD gradients. In these conditions we flew the 14-channel NASA Ames Airborne Tracking Sun photometer (AATS) on a Jetstream 31 (J31) aircraft. Legs flown at low altitude (usually less than 100 m ASL) provided comparisons of AATS AOD spectra to retrievals for 90 grid cells of the satellite radiometers MODIS-Terra, MODIS-Aqua, and MISR, all over the ocean. Characterization of the retrieval environment was aided by using vertical profiles by the J31 (showing aerosol vertical structure) and, on occasion, shipboard measurements of light scattering and absorption. AATS provides AOD at 13 wavelengths lambda from 354 to 2138 nm, spanning the range of aerosol retrieval wavelengths for MODIS over ocean (466-2119 nm) and MISR (446-866 nm). Midvisible AOD on low-altitude J31 legs in satellite grid cells ranged from 0.05 to 0.9, with horizontal gradients often in the range 0.05 to 0.13 per 10 km. When possible, we used ship measurements of humidified aerosol scattering and absorption to estimate AOD below the J31. In these cases, which had J31 altitudes 60-110 m ASL (typical of J31 low-altitude transects), estimated midvisible AOD below the J31 ranged from 0.003 to 0.013, with mean 0.009 and standard deviation 0.003. These values averaged 6 percent of AOD above the 53 1. MISR-AATS comparisons on 29 July 2004 in 8 grid cells (each -17.6 km x 17.6 km) show that MISR versions 15 and 16 captured the AATS-measured AOD gradient (correlation coefficient R2 = 0.87 to 0.92), but the MISR gradient was somewhat weaker than the AATS gradient. The large AOD (midvisible values up to -0.9) and differing gradients in this case produced root-mean-square (RMS) MISR-AATS AOD differences of 0.03 to 0.21 (9 to 31%). MISR V15 Angstrom exponent alpha (= -dlnAOD/dln lambda) was closer to AATS than was MISR V16. MODIS-AATS AOD comparisons on 8 overpasses using 61 grid cells (each nominally 10 km x 10 km) had R2 approximately 0.97, with RMS AOD difference approximately 0.03 (approximately 20%). About 87% of the MODIS AOD retrievals differed from AATS values by less than the predicted MODIS over-ocean uncertainty, Delta tau = plus/minus 0.03 plus/minus 0.05 tau. In contrast to the small MODIS-AATS differences in AOD, MODIS-AATS differences in Angstrom exponent alpha were large: RMS differences for alpha (553, 855 nm) were 0.28 for MODIS-Terra and 0.64 for MODIS-Aqua; RMS differences for alpha (855, 2119 nm) were larger still, 0.61 for MODIS-Terra and 1.14 for MODIS-Aqua. The largest MODIS-AATS Angstrom exponent differences were associated with small AOD values, for which MODIS AOD relative uncertainty is large. Excluding cases with AOD(855 nm) less than 0.1 reduced MODIS-AATS alpha differences substantially. In one grid cell on 21 July 2004, smoke over cloud appeared to impair the MODIS-Aqua cloud mask, resulting in retrieved AODs that significantly exceeded AATS values. Experiments with extending MODIS retrievals into the glint mask yielded MODIS AODs consistently less than AATS AODs, especially at long wavelength, indicating that the current MODIS glint mask limits should not be reduced to the extent tried here. The sign of the AOD differences within the glint mask (MODIS AOD less than AATS AOD) is consistent with ship-measured wind speeds there.

Russell, P. B.↗

Testing the MODIS Satellite Retrieval of Aerosol Fine-Mode Fraction

Satellite retrievals of the fine-mode fraction (FMF) of midvisible aerosol optical depth, tau, are potentially valuable for constraining chemical transport models and for assessing the global distribution of anthropogenic aerosols. Here we compare satellite retrievals of FMF from the Moderate Resolution Imaging Spectroradiometer (MODIS) to suborbital data on the submicrometer fraction (SMF) of tau. SMF is a closely related parameter that is directly measurable by in situ techniques. The primary suborbital method uses in situ profiling of SMF combined with airborne Sun photometry both to validate the in situ estimate of ambient extinction and to take into account the aerosol above the highest flight level. This method is independent of the satellite retrieval and has well-known accuracy but entails considerable logistical and technical difficulties. An alternate method uses Sun photometer measurements near the surface and an empirical relation between SMF and the Angstrom exponent, A, a measure of the wavelength dependence of optical depth or extinction. Eleven primary and fifteen alternate comparisons are examined involving varying mixtures of dust, sea salt, and pollution in the vicinity of Korea and Japan. MODIS ocean retrievals of FMF are shown to be systematically higher than suborbital estimates of SMF by about 0.2. The most significant cause of this discrepancy involves the relationship between 5 and fine-mode partitioning; in situ measurements indicate a systematically different relationship from what is assumed in the satellite retrievals. Based on these findings, we recommend: (1) satellite programs should concentrate on retrieving and validating since an excellent validation program is in place for doing this, and (2) suborbital measurements should be used to derive relationships between A and fine-mode partitioning to allow interpretation of the satellite data in terms of fine-mode aerosol optical depth.

Anderson, Theodore L.↗

Temporal Stability of Surface Roughness Effects on Radar Based Soil Moisture Retrieval During the Corn Growth Cycle

A representative soil surface roughness parameterization needed for the retrieval of soil moisture from active microwave satellite observation is difficult to obtain through either in-situ measurements or remote sensing-based inversion techniques. Typically, for the retrieval of soil moisture, temporal variations in surface roughness are assumed to be negligible. Although previous investigations have suggested that this assumption might be reasonable for natural vegetation covers (Moran et al. 2002, Thoma et al. 2006), insitu measurements over plowed agricultural fields (Callens et al. 2006) have shown that the soil surface roughness can change considerably over time. This paper reports on the temporal stability of surface roughness effects on radar observations and soil moisture retrieved from these radar observations collected once a week during a corn growth cycle (May 10th - October 2002). The data set employed was collected during the Optimizing Production Inputs for Economic and Environmental Enhancement (OPE3) field campaign covering this 2002 corn growth cycle and consists of dual-polarized (HH and VV) L-band (1.6 GHz) acquired at view angles of 15, 35, and 55 degrees. Cross-polarized L baud radar data were also collected as part of this experiment, but are not used in the analysis reported on here. After accounting for vegetation effects on radar observations, time-invariant optimum roughness parameters were determined using the Integral Equation Method (IEM) and radar observations acquired over bare soil and cropped conditions (the complete radar data set includes entire corn growth cycle). The optimum roughness parameters, soil moisture retrieval uncertainty, temporal distribution of retrieval errors and its relationship with the weather conditions (e.g. rainfall and wind speed) have been analyzed. It is shown that over the corn growth cycle, temporal roughness variations due to weathering by rain are responsible for almost 50% of soil moisture retrieval uncertainty depending on the sensing configuration. The effects of surface roughness variations are found to be smallest for observations acquired at a view angle of 55 degrees and HH polarization. A possible explanation for this result is that at 55 degrees and HH polarization the effect of vertical surface height changes on the observed radar response are limited because the microwaves travel parallel to the incident plane and as a result will not interact directly with vertically oriented soil structures.

Joseph, A.T.↗

Improved Temperature Sounding and Quality Control Methodology Using AIRS/AMSU Data: The AIRS Science Team Version 5 Retrieval Algorithm

This paper describes the AIRS Science Team Version 5 retrieval algorithm in terms of its three most significant improvements over the methodology used in the AIRS Science Team Version 4 retrieval algorithm. Improved physics in Version 5 allows for use of AIRS clear column radiances in the entire 4.3 micron CO2 absorption band in the retrieval of temperature profiles T(p) during both day and night. Tropospheric sounding 15 micron CO2 observations are now used primarily in the generation of clear column radiances .R(sub i) for all channels. This new approach allows for the generation of more accurate values of .R(sub i) and T(p) under most cloud conditions. Secondly, Version 5 contains a new methodology to provide accurate case-by-case error estimates for retrieved geophysical parameters and for channel-by-channel clear column radiances. Thresholds of these error estimates are used in a new approach for Quality Control. Finally, Version 5 also contains for the first time an approach to provide AIRS soundings in partially cloudy conditions that does not require use of any microwave data. This new AIRS Only sounding methodology, referred to as AIRS Version 5 AO, was developed as a backup to AIRS Version 5 should the AMSU-A instrument fail. Results are shown comparing the relative performance of the AIRS Version 4, Version 5, and Version 5 AO for the single day, January 25, 2003. The Goddard DISC is now generating and distributing products derived using the AIRS Science Team Version 5 retrieval algorithm. This paper also described the Quality Control flags contained in the DISC AIRS/AMSU retrieval products and their intended use for scientific research purposes.

Susskind, Joel↗