Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rocket Vehicle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Self-acting and hydrodynamic shaft seals.

Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

Ludwig, L. P.↗
NASA NTRS1976

Low-cycle fatigue of Type 347 stainless steel and Hastelloy alloy X in hydrogen gas and in air at elevated temperatures

An investigation was conducted to assess the low-cycle fatigue resistance of two alloys, Type 347 stainless steel and Hastelloy Alloy X, that were under consideration for use in nuclear-powered rocket vehicles. Constant-amplitude, strain-controlled fatigue tests were conducted under compressive strain cycling at a constant strain rate of 0.001/sec and at total axial strain ranges of 1.5, 3.0, and 5.0 %, in both laboratory-air and low-pressure hydrogen-gas environments at temperatures from 538 to 871 C. Specimens were obtained from three heats of Type 347 stainless steel bar and two heats of Hastelloy Alloy X. The tensile properties of each heat were determined at 21, 538, 649, and 760 C. The continuous cycling fatigue resistance was determined for each heat at temperatures of 538, 760, and 871 C. The Type 347 stainless steel exhibited equal or superior fatigue resistance to the Hastelloy Alloy X at all conditions of this study.

Jaske, C. E.↗
NASA NTRS1977

Some basic mathematical methods of diffusion theory

An introductory treatment of the fundamentals of diffusion theory is presented, starting with molecular diffusion and leading up to the statistical methods of turbulent diffusion. A multilayer diffusion model, designed to permit concentration and dosage calculations downwind of toxic clouds from rocket vehicles, is described. The concepts and equations of diffusion are developed on an elementary level, with emphasis on atmospheric applications.

Giere, A. C.↗
NASA NTRS1977

Liquid Rocket Lines, Bellows, Flexible Hoses, and Filters

Fluid-flow components in a liquid propellant rocket engine and the rocket vehicle which it propels are interconnected by lines, bellows, and flexible hoses. Elements involved in the successful design of these components are identified and current technologies pertaining to these elements are reviewed, assessed, and summarized to provide a technology base for a checklist of rules to be followed by project managers in guiding a design or assessing its adequacy. Recommended procedures for satisfying each of the design criteria are included.

Source record↗
NASA NTRS1976

Laser absorption phenomena in flowing gas devices

A theoretical and experimental investigation is presented of inverse Bremsstrahlung absorption of CW CO2 laser radiation in flowing gases seeded with alkali metals. In order to motivate this development, some simple models are described of several space missions which could use laser powered rocket vehicles. Design considerations are given for a test call to be used with a welding laser, using a diamond window for admission of laser radiation at power levels in excess of 10 kW. A detailed analysis of absorption conditions in the test cell is included. The experimental apparatus and test setup are described and the results of experiments presented. Injection of alkali seedant and steady state absorption of the laser radiation were successfully demonstrated, but problems with the durability of the diamond windows at higher powers prevented operation of the test cell as an effective laser powered thruster.

Chapman, P. K.↗
NASA NTRS1978

Solar power satellite system definition study. Part 3: Preferred concept system definition

A concise but complete system description for the preferred concept of the Solar Power Satellite System is presented. Significant selection decisions included the following: (1) single crystal silicon solar cells; (2) glass encapsulated solar cell blankets; (3) concentration ratio 1; (4) graphite composite materials for primary structure; (5) electric propulsion for attitude control; (6) klystron RF amplifier tubes for the transmitter; (7) one kilometer diameter transmitter with a design trans mission link output power of 5,000 megawatts; (8) construction in low earth orbit with self-powered transfer of satellite modules to geosynchronous orbit; and (9) two-stage winged fully reusable rocket vehicle for transportation to low earth orbit.

Source record↗
NASA NTRS1979

Atmospheric entry and fragmentation of dense meteoroids

Fragmentation characteristics for four artificial meteoroids of high density and high tensile strength with varying size, velocity, and material are investigated. The meteoroids analyzed were lifted to natural meteor altitude by a rocket vehicle system. The meteoroids were then accelerated back into the Earth's atmosphere at natural meteor velocities. Anomalous deceleration of high density meteors was studied. It is shown that anomalies in the deceleration are due to progressive fragmentation of the meteoroids. These anomalies in the deceleration of high density meteoroids are similar to the anomalies that occur in the deceleration of natural meteors, which are generally assumed to be porous and of weak structure.

Bess, T. D.↗
NASA NTRS1981

Dispersion model studies for Space Shuttle environmental effects activities

The NASA/MSFC REED computer code was developed for predicting concentrations, dosage, and deposition downwind from rocket vehicle launches. The calculation procedures and results of nine studies using the code are presented. Topics include plume expansion, hydrazine concentrations, and hazard calculations for postulated fuel spills.

Source record↗
NASA NTRS1982

Flight performance summary for three NASA Terrier-Malemute II sounding rockets

The subject of this paper is the presentation of flight data for three Terrier-Malemute II sounding rocket vehicles. The Malemute motor was modified by adding insulation and using a propellant that produced less Al2O3 agglomerate in the chamber. This modification, designated Malemute II, reduced the sensitivity of the motor to the roll rate induced motor case burnthrough experienced on some earlier Malemute flights. Two flight tests, including a single stage Malemute II and a Terrier-Malemute II, were made by Sandia to qualify this modification. The three NASA operational flights that are the subject of this paper were made using the modified Malemute II motors.

Patterson, R. A.↗
NASA NTRS1982

A study of mesospheric rocket contrails and clouds produced by liquid-fueled rockets

Changes in the atmospheric composition, particularly through the condensation of rocket vehicle exhaust, caused by the flights of 400 heavy lift launch vehicles (HLLV) to carry crews and materials into space to build a satellite solar power system (SPS) were examined. Attention was given to the formation of mesospheric contrails and clouds. A one-dimensional model was used to formulate the photochemistry and vertical transport of water vapor, its nucleation into an ice cloud, and the microphysical development of the cloud. Considering one HLLV launch per day for a decade, it is projected that the upper atmosphere water vapor concentration would be increased by 10-20%, thereby augmenting the size and opacity of natural noctilucent clouds by 50%. No climatological consequences are foreseen from the clouds, although spectacular noctiluminescent cloud displays are thought to be possible.

Turco, R. P.↗
NASA NTRS1985

Exhaust Effluent Diffusion Model

Rocket Exhaust Effluent Diffusion Model (REEDM) predicts concentrations, dosages, and depositions downwind from normal and abnormal launches of rocket vehicles at NASA's Kennedy Space Center. REEDM written in FORTRAN IV for interactive execution.

Bjorklund, J. R.↗
NASA NTRS1986

Cryogenic gear technology for an orbital transfer vehicle engine and tester design

Technology available for gears used in advanced Orbital Transfer Vehicle rocket engines and the design of a cryogenic adapted tester used for evaluating advanced gears are presented. The only high-speed, unlubricated gears currently in cryogenic service are used in the RL10 rocket engine turbomachinery. Advanced rocket engine gear systems experience operational load conditions and rotational speed that are beyond current experience levels. The work under this task consisted of a technology assessment and requirements definition followed by design of a self-contained portable cryogenic adapted gear test rig system.

Calandra, M.↗
NASA NTRS1986

Potential directions for a second generation Space Shuttle

This paper reports on trends and potentials for advanced rocket vehicles which may be candidates for eventual phased replacement of the Shuttle. Although such a replacement need is not foreseen until 2002 at the earliest, due to the long time to develop a new vehicle its definition has already begun. The paper discusses the role of such a "Shuttle II' in the architecture of launch vehicles likely to exist in the post-2000 era, leading to its designation as a smaller, primarily passenger-carrying vehicle to complement large, unmanned cargo launch vehicles. While a two-stage glide-back fully reusable configuration is optimum for near-term technology, a single-stage-to-orbit reusable glide-back configuration is optimum for farther-term technology advances. For advanced technology which could be available in the mid-90s, such vehicle could orbit a payload weight equal to their own dry weight - a factor of 10 better than current launch vehicles.

Bekey, I.↗
NASA NTRS1989

Advanced Manned Launch Systems

Advanced Manned Launch Systems (AMLS) studies underway at the NASA Langley Research Center are part of a broader effort examining options for the next U.S. manned space transportation system. AMLS study phases have focused on investigating mission needs and identifying technologies and technology levels, concepts, systems, operational requirements, and life-cycle costs. For near-term technologies and an operations-oriented approach, two-stage vertical-takeoff rocket vehicles with significant levels of reusability are shown to be cost-effective for moderate to high flight rates. All-hydrogen fuel vehicles are also preferred over methane boosted systems from both operational and cost considerations.

Talay, Theodore A.↗
NASA NTRS1989

Advanced manned launch systems

Advanced Manned Launch Systems (AMLS) studies underway at the NASA Langley Research Center are described. The AMLS studies have focused on investigating mission needs and identifying technologies, operational requirements, and life-cycle costs. Two-stage vertical take off rocket vehicles with significant levels of reusability are shown to be cost effective for moderate to high flight rates. All-hydrogen fuel vehicles are preferred over methane boosted systems for both operational and cost considerations. Drawings of possible AMLS design solutions are presented. Fully reusable, partially resusable, expendable stage and horizontal take off airbreather/rocket solutions are compared.

Talay, Theodore A.↗
NASA NTRS1991

An Historical Perspective of the NERVA Nuclear Rocket Engine Technology Program

Nuclear rocket research and development was initiated in the United States in 1955 and is still being pursued to a limited extent. The major technology emphasis occurred in the decade of the 1960s and was primarily associated with the Rover/NERVA Program where the technology for a nuclear rocket engine system for space application was developed and demonstrated. The NERVA (Nuclear Engine for Rocket Vehicle Application) technology developed twenty years ago provides a comprehensive and viable propulsion technology base that can be applied and will prove to be valuable for application to the NASA Space Exploration Initiative (SEI). This paper, which is historical in scope, provides an overview of the conduct of the NERVA Engine Program, its organization and management, development philosophy, the engine configuration, and significant accomplishments.

Robbins, W. H.↗
NASA NTRS1991

Nuclear thermal propulsion

This document is presented in viewgraph form, and the topics covered include the following: (1) the direct fission-thermal propulsion process; (2) mission applications of direct fission-thermal propulsion; (3) nuclear engines for rocket vehicles; (4) manned mars landers; and (5) particle bed reactor design.

Bennett, Gary L.↗
NASA NTRS1991

The rationale/benefits of nuclear thermal rocket propulsion for NASA's lunar space transportation system

Two nuclear thermal rocket (NTR) technology options are examined - one derived from the graphite-moderated reactor concept developed by NASA and the AEC under the Rover/NERVA (Nuclear Engine for Rocket Vehicle Application) programs, and a second concept, the Particle Bed Reactor. The paper also summarizes NASA's lunar outpost scenario, compares relative performance provided by different lunar space transportation system concepts, and discusses important operational issues (e.g., reusability, engine 'end-of-life' disposal, etc.) associated with using this important propulsion technology.

Borowski, Stanley K.↗