SEARCH · Search NASA

Results for “SET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Geologic setting of the Apollo 15 samples.

The samples and photographs returned from the Apollo 15 site show that Hadley Delta is largely underlain by breccias whose clasts are mainly fragments of coarse-grained feldspathic rocks and nonmare-type basalt. Conspicuous sets of lineaments, visible in surface and orbital photographs of Mount Hadley and Hadley Delta, may represent systematic layering or fracture sets. The mare surface, with regolith about 5 meters thick, is underlain by two major basalt types, at least one of which has extensive lateral continuity and is exposed in the upper wall of Hadley Rille. Gradual erosional recession of the edges and filing of the interior of the rille by talus have contributed to the present cross sectional profile.

Source record↗

NASA NTRS1973

Signal conditioner test set

Compact, light-weight, solid-state test set can be used to check signal conditioning modules while they are installed in system. Test sets may also be used to cycle ground computer, if it is suspected of malfunctioning, rather than using signal conditioners.

Houck, W. H.↗

NASA NTRS1972

The pseudonoise test set: Communication system's performance evaluation based upon RMS error testing

A pseudonoise (PN) test set was built to provide a relatively easy means of accurately determining the end-to-end rms error introduced by a communication system when subjected to wideband data. It utilizes a filtered pseudorandom sequence generator as a wideband data source, providing a convenient means for digitally delaying the input reference signal for comparison with the distorted test communication system output. In addition to providing a means to measure the end-to-end rms error and the average delay of a communication system, the PN test set also provides a means to determine the tested system's impulse response and correlation function. The theory of PN testing is discussed in detail along with the most difficult aspects of implementation, the building of matched filter pairs. Both analytical and empirical results are reported which support the contentions that this is an accurate and practical way to acquire figures of merit for complete communication systems.

Wallace, G. R.↗

NASA NTRS1973

On-film optical recording of camera lens settings

An apparatus is described for recording a representation of the camera lens aperture and focus setting on the film of a camera, while the photographic image is being recorded. A data lens is provided between the camera lens and film, by means of which the aperture and focus setting may be determined. The determination is made by measuring both the location and the size of a data image provided by the data lens. The data lens apparatus requires no electrical power, is low in weight, and does not result in an increase in the external dimensions of the camera.

Thompson, R. E.↗

NASA NTRS1972

The Fuzzy Sets Approach to Pattern Recognition

The fuzzy set concept is defined and its application to pattern recognition is illustrated. An iterative procedure for learning the equi-membership surfaces and for generating a set of discriminate functions for two pattern classes is given.

Wilson, T.↗

NASA NTRS1972

Three dimensional turbulent boundary layers: Data sets for two-space coordinate flows

Sets of data (flows) from eight original sources on three-dimensional turbulent boundary layers were reevaluated and tabulated in a common format. The flows studied were all of the type describable in only two space coordinates, e.g., flow over a swept wing of infinite span. The principal data in each set are profiles of the main and crossflow components of mean velocity. Turbulent shear stress vector profiles were available for two flows, Bradshaw and Terrell (1969) and Johnson (1970). Free stream pressure gradient, wall shear stress coefficient and angle, integral thickness and left and right hand sides of the momentum integral equations were evaluated in a consistent manner for each flow.

Wheeler, A. J.↗

NASA NTRS1976

Demonstration of the frequency offset errors introduced by an incorrect setting of the Zeeman/magnetic field adjustment on the cesium beam frequency standard

The fine frequency setting of a cesium beam frequency standard is accomplished by adjusting the C field control with the appropriate Zeeman frequency applied to the harmonic generator. A novice operator in the field, even when using the correct Zeeman frequency input, may mistakenly set the C field to any one of seven major Beam I peaks (fingers) represented by the Ramsey curve. This can result in frequency offset errors of as much as 2.5 parts in ten to the tenth. The effects of maladjustment are demonstrated and suggestions are discussed on how to avoid the subtle traps associated with C field adjustments.

Kaufmann, D. C.↗

NASA NTRS1976

Classification improvement by optimal dimensionality reduction when training sets are of small size

A computer simulation was performed to test the conjecture that, when the sizes of the training sets are small, classification in a subspace of the original data space may give rise to a smaller probability of error than the classification in the data space itself; this is because the gain in the accuracy of estimation of the likelihood functions used in classification in the lower dimensional space (subspace) offsets the loss of information associated with dimensionality reduction (feature extraction). A number of pseudo-random training and data vectors were generated from two four-dimensional Gaussian classes. A special algorithm was used to create an optimal one-dimensional feature space on which to project the data. When the sizes of the training sets are small, classification of the data in the optimal one-dimensional space is found to yield lower error rates than the one in the original four-dimensional space.

Starks, S. A.↗

NASA NTRS1976

Shutter/aperture settings for aerial photography

Determination of aerial camera shutter and aperture settings to produce consistently high-quality aerial photographs is a task complicated by numerous variables. Presented in this article are brief discussions of each variable and specific data which may be used for the systematic control of each. The variables discussed include sunlight, aircraft altitude, subject and season, film speed, and optical system. Data which may be used as a base reference are included, and encompass two sets of sensitometric specifications for two film-chemistry processes along with camera-aircraft parameters, which have been established and used to produce good exposures. Information contained here may be used to design and implement an exposure-determination system for aerial photography.

Lockwood, H. E.↗

NASA NTRS1976

LS-44: An improved deep space network station location set for Viking navigation

Improved estimates for the spin axis and longitude components of the Deep Space Network station locations were obtained from post-flight processing of radio metric data received from various Mariner planetary missions. The use of an upgraded set of ionospheric calibrations and the incorporation of near-Venus and near-Mercury radio metric data from the Mariner 10 spacecraft are the principal contributing effects to the improvement. These new estimates, designated Location Set (LS) 44, have supported Viking navigation activities in the vicinity of Mars. As such, the station locations were determined relative to the planetary positions inherent in JPL Development Ephemeris (DE) 84, which was used throughout the Viking mission. The article also presents and discusses a version of LS 44 based upon the latest planetary ephemeris, DE 96.

Koble, H. M.↗

NASA NTRS1976

Compressor blade setting angle accuracy study, volume 1

The aerodynamic test of a small, single stage, highly loaded, axial flow transonic compressor is covered. The stage was modified by fabricating a 24 blade rotor with mis-set blades in a repeating pattern - two degrees closed from nominal, two degrees open from nominal and nominal. The unit was instrumented to determine overall performance and average blade element data. High-response, dynamic pressure probes were installed to record pressure patterns at selected points in the flowpath. Testing was conducted at speeds from 70 to 94% of design equivalent speed with a conventional casing and also with circumferential grooves over the rotor tip. Testing indicated severe performance penalties were incurred as a result of the mis-set blading. Lower flow, pressure ratio, and efficiency were observed for the stage with or without casing treatment. Periodic pressure variations were detected at every location where high response pressure sensors were located and were directly related to blading geometry.

Holman, F. F.↗

NASA NTRS1977

Pseudo noise test set operation manual

Pseudonoise (PN) test set was designed to provide a reliable, operationally simple unit which allows the previously mentioned analog rms end-to-end error measurement of most communication systems to be easily performed. It also provides a band-limited pseudorandom noise as input, thereby escaping the disadvantages of most deterministic signals while retaining the advantages of using true-band-limited noise. In addition, the PN test set has the capability to be used as a means with which the autocorrelation function and impulse response may be determined for certain systems.

Weathers, G.↗

NASA NTRS1977

A computerized traffic control algorithm to determine optimal traffic signal settings

An algorithm was developed to optimally control the traffic signals at each intersection using a discrete time traffic model applicable to heavy or peak traffic. Off line optimization procedures were applied to compute the cycle splits required to minimize the lengths of the vehicle queues and delay at each intersection. The method was applied to an extensive traffic network in Toledo, Ohio. Results obtained with the derived optimal settings are compared with the control settings presently in use.

Seldner, K.↗

NASA NTRS1977

AOIPS data base management systems support for GARP data sets

A data base management system is identified, developed to provide flexible access to data sets produced by GARP during its data systems tests. The content and coverage of the data base are defined and a computer-aided, interactive information storage and retrieval system, implemented to facilitate access to user specified data subsets, is described. The computer programs developed to provide the capability were implemented on the highly interactive, minicomputer-based AOIPS and are referred to as the data retrieval system (DRS). Implemented as a user interactive but menu guided system, the DRS permits users to inventory the data tape library and create duplicate or subset data sets based on a user selected window defined by time and latitude/longitude boundaries. The DRS permits users to select, display, or produce formatted hard copy of individual data items contained within the data records.

Gary, J. P.↗

NASA NTRS1979

LS47: A DSN station location set compatible with JPL development ephemeris DE108

An updated Deep Space Network station location set, LS47, is presented which is compatible with JPL Development Ephemeris DE108. Analytic procedures for linearly correcting station spin axis and longitude estimates for an ephemeris update based on Brouwer-Clemence Set III parameters are briefly discussed. The validity of this technique is demonstrated by a comparison of a linearly corrected solution with one explicitly determined by reprocessing the data. A mission data base, including Viking 1 and 2 encounter data, is first used to obtain an updated DE96 compatible station location solution, LS46, which in turn is adjusted to form the DE108 solution, LS47. Improved station Z-heights are estimated by using available very long baseline interferometry data. Spin axis differences between LS46 and LS47 are relatively insignificant; however, the ephemeris change introduces a -0.8 x 10 to the -5 power degree rotation in the DE96 longitude ephemeris.

Ellis, J.↗

NASA NTRS1977

Set-point control of nonlinear systems

A method of nonlinear stochastic control is applied to the problem of providing set-point control. The procedure is illustrated for a nonlinear second-order plant. The controller design uses a variation of the 'multiple-model adaptive control' approach. Specific problems related to the design are investigated, including learning time and set-point accuracy dependence on the number of approximating models, chord versus tangent approximations, and the a priori Markov switching parameter values. Simulations are provided for different situations under various levels of measurement noise.

Vanlandingham, H. F.↗

NASA NTRS1981

SRB dewatering set

The system components and operation of the space shuttle solid rocket booster (SRB) dewatering set are described. The SRB dewatering set consists of a nozzle plug, control console, remote control unit, power distribution unit, umbilical cable, interconnect cables, and various handling and storage items. The nozzle plug (NP) is a remotely controlled, tethered underwater vehicle that is launched from the retrieval vessel (RV) by a crane, descends down the side of the SRB, and is positioned below the SRB nozzle. A TV camera mounted at the top of the NP central core is used by the control console operator to visually guide the NP during descent and docking. The NP is then driven up and locked into the nozzle. Compressed air is passed through the umbilical from the RV, through the NP and into the SRB motor. The water inside the SRB is expelled causing the SRB to rotate to a near horizontal attitude on the surface of the water.

Wickham, R. E.↗

NASA NTRS1981

An algorithm for minimum-cost set-point ordering in a cryogenic wind tunnel

An algorithm for minimum cost ordering of set points in a cryogenic wind tunnel is developed. The procedure generates a matrix of dynamic state transition costs, which is evaluated by means of a single-volume lumped model of the cryogenic wind tunnel and the use of some idealized minimum-costs, which is evaluated by means of a single-volume lumped model of the cryogenic wind tunnel and the use of some idealized minimum-cost state-transition control strategies. A branch and bound algorithm is employed to determine the least costly sequence of state transitions from the transition-cost matrix. Some numerical results based on data for the National Transonic Facility are presented which show a strong preference for state transitions that consume to coolant. Results also show that the choice of the terminal set point in an open odering can produce a wide variation in total cost.

Tripp, J. S.↗