Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIGNAL RECEPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Satellite and terrestrial narrow-band propagation measurements at 2.05 GHz

A series of satellite and terrestrial propagation measurements were conducted on 15 and 16 Dec. 1994 in the vicinity of the Jet Propulsion Laboratory (JPL), Pasadena, California, in support of the VOA/JPL DBS-Radio Program. The reason for including terrestrial measurements was the possible use of terrestrial boosters to improve reception in some satellite digital audio broadcasting system service areas. The signal sources used were the NASA TDRS satellite located at 171 degrees West and a terrestrial transmitter located on a high point on JPL property. Both signals were unmodulated carriers near 2.05 GHz, spaced a few kHz apart so that both could be received simultaneously by a single receiver. An unmodulated signal was used in order to maximize the dynamic range of the signal strength measurement. A range of greater than 35 dB was achieved with the satellite signal, and over 50 dB was achieved with the terrestrial signal measurements. Three test courses were used to conduct the measurements: (1) a 33 km round trip drive from JPL through Pasadena was used to remeasure the propagation of the satellite signal over the path previously used in DBS-Radio experiments in mid 1994. A shortened portion of this test course, approximately 20 km, was used to measure the satellite and terrestrial signals simultaneously; (2) a 9 km round trip drive through JPL property, going behind buildings and other obstacles, was used to measure the satellite and terrestrial signals simultaneously; and (3) a path through one of the buildings at JPL, hand carrying the receiver, was also used to measure the satellite and terrestrial signals simultaneously.

Vaisnys, Arv↗
NASA NTRS2006

Sequence Detection for PPM Optical Communication With ISI

A method of sequence detection has been proposed to mitigate the effects of inter-slot interference and inter-symbol interference (both denoted ISI) in the reception of M-ary pulse-position modulation (PPM) optical signals. The method would make it possible to reduce the error rate for a given slot duration, to use a shorter slot duration (and, hence, to communicate at a higher rate) without exceeding a given error rate, or to use a lower-bandwidth (and, hence, less-expensive) receiver to receive a signal of a given slot width without exceeding a given error rate. In M-ary PPM, a symbol period is divided into M time slots, each of duration T(sub s), and a symbol consists of a binary sequence ones and zeros represented by pulses or the absence of pulses, respectively, in the time slots. At the transmitter, the bit stream is used to modulate a laser, the output of which is constant (either full power or zero power, representing 1 or 0, respectively) during each time slot. However, the signal becomes attenuated (signal photons are lost) in propagation from the transmitter to the receiver and noise enters at the receiver, complicating the problem of determining the timing of the symbol periods and slots and identifying the symbols.

Moision, Bruce↗
NASA NTRS1984

Enhanced Radio Frequency Carrier Margin Improvements for an Array of Receiving Systems with Unequal Predetection Signal-to-noise Ratios

Enhanced radio frequency carrier margin improvement for arrayed receiving systems for coherent reception which provides a significant carrier sensitivity improvement with a resultant decrease in telemetry radio loss due to reduction in rms phase noise at low carrier margins is discussed. A significant increase in doppler rate capability is realized relative to that obtained by switching to a narrower tracking loop bandwidth to obtain the same carrier sensitivity improvement. The situation for arrayed receiving systems with unequal apertures and statisically independent predetection noise is examined.

Brockman, M. H.↗
NASA NTRS2009

Deep-Space Ka-Band Link Priority Data Protection: Pre-Emptive Retransmission vs. Margin

In this paper the performance of two preemptive retransmission schemes for protection of priority data over deep-space Ka-band links is evaluated. The first scheme merges the correctly received bit from each transmission to create the most complete set of priority data for each pass (bit merge). The second scheme (symbol combining) combines the soft symbols received from each transmission of the priority data to increase the priority data's signal to noise ratio (SNR), thus increasing the liklihood of the correct reception.

Shambayati, Shervin↗
NASA NTRS2007

PREDICTS

PREDICTS is a computer program that predicts the frequencies, as functions of time, of signals to be received by a radio science receiver in this case, a special-purpose digital receiver dedicated to analysis of signals received by an antenna in NASA s Deep Space Network (DSN). Unlike other software used in the DSN, PREDICTS does not use interpolation early in the calculations; as a consequence, PREDICTS is more precise and more stable. The precision afforded by the other DSN software is sufficient for telemetry; the greater precision afforded by PREDICTS is needed for radio-science experiments. In addition to frequencies as a function of time, PREDICTS yields the rates of change and interpolation coefficients for the frequencies and the beginning and ending times of reception, transmission, and occultation. PREDICTS is applicable to S-, X-, and Ka-band signals and can accommodate the following link configurations: (1) one-way (spacecraft to ground), (2) two-way (from a ground station to a spacecraft to the same ground station), and (3) three-way (from a ground transmitting station to a spacecraft to a different ground receiving station).

Zhou, Hanying↗
NASA NTRS2011

Hybrid RF / Optical Communication Terminal with Spherical Primary Optics for Optical Reception

Future deep space communications are likely to employ not only the existing RF uplink and downlink, but also a high capacity optical downlink. The Jet Propulsion Laboratory (JPL) is currently investigating the benefits of a ground based hybrid RF and deep space optical terminal based on limited modification of existing 34 meter antenna designs. The ideal design would include as large an optical aperture as technically practical and cost effective, cause minimal impact to RF performance, and remain cost effective even when compared to a separate optical terminal of comparable size. Numerous trades and architectures have been considered, including shared RF and optical apertures having aspheric optics and means to separate RF and optical signals, plus, partitioned apertures in which various zones of the primary are dedicated to optical reception. A design based on the latter is emphasized in this paper, employing spherical primary optics and a new version of a "clamshell" corrector that is optimized to fit within the limited space between the antenna sub-reflector and the existing apex structure that supports the subreflector. The mechanical design of the hybrid accommodates multiple spherical primary mirror panels in the central 11 meters of the antenna, and integrates the clamshell corrector and optical receiver modules with antenna hardware using existing attach points to the maximum extent practical. When an optical collection area is implemented on a new antenna, it is possible to design the antenna structure to accommodate the additional weight of optical mirrors providing an equivalent aperture of several meters diameter. The focus of our near term effort is to use optics with the 34 meter DSS-13 antenna at Goldstone to demonstrate spatial optical acquisition and tracking capability using an optical system that is temporarily integrated into the antenna.

optical communications↗
NASA NTRS1963

Participation of the holmdel station in the telstar project

The facility for satellite communication studies at Holmdel, New Jersey, was originally established to take part in Project Echo. This paper describes the modifications required to participate in the Telstar experiments and the results obtained during operations from July 10 to November 9, 1962. Reception of television from the satellite was successfully accomplished, studies were made of the signal levels, and the changes with time of the satellite spin rate and spin axis orientation were determined.

TELSTAR SATELLITE↗
NASA NTRS2013

Demonstration of Detection and Ranging Using Solvable Chaos

Acoustic experiments demonstrate a novel approach to ranging and detection that exploits the properties of a solvable chaotic oscillator. This nonlinear oscillator includes an ordinary differential equation and a discrete switching condition. The chaotic waveform generated by this hybrid system is used as the transmitted waveform. The oscillator admits an exact analytic solution that can be written as the linear convolution of binary symbols and a single basis function. This linear representation enables coherent reception using a simple analog matched filter and without need for digital sampling or signal processing. An audio frequency implementation of the transmitter and receiver is described. Successful acoustic ranging measurements are presented to demonstrate the viability of the approach.

Corron, Ned J.↗
DOE OSTI2022

Transience of the Retinal Output Is Determined by a Great Variety of Circuit Elements

Retinal ganglion cells (RGCs) encrypt stimulus features of the visual scene in action potentials and convey them toward higher visual centers in the brain. Although there are many visual features to encode, our recent understanding is that the ~46 different functional subtypes of RGCs in the retina share this task. In this scheme, each RGC subtype establishes a separate, parallel signaling route for a specific visual feature (e.g., contrast, the direction of motion, luminosity), through which information is conveyed. The efficiency of encoding depends on several factors, including signal strength, adaptational levels, and the actual efficacy of the underlying retinal microcircuits. Upon collecting inputs across their respective receptive field, RGCs perform further analysis (e.g., summation, subtraction, weighting) before they generate the final output spike train, which itself is characterized by multiple different features, such as the number of spikes, the inter-spike intervals, response delay, and the rundown time (transience) of the response. These specific kinetic features are essential for target postsynaptic neurons in the brain in order to effectively decode and interpret signals, thereby forming visual perception. We review recent knowledge regarding circuit elements of the mammalian retina that participate in shaping RGC response transience for optimal visual signaling.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

The 50-MHz meteor radar observation at Syowa Station, Antarctica

The 50-MHz Doppler radar installed at Syowa Station (69 deg 00'S, 39 deg 35'E), Antarctica, in 1982 can detect continuously a meteor echo if an operator assigns the meteor mode operation to the radar. The radar has two narrow antenna beams (4 deg in the horizontal plane), one toward geomagnetic south and the other toward approximately geographic south, with a crossing angle of about 33 deg. The minicomputer annexed to the radar controls the transmission and reception of a 50-MHz wave. If the receiver detects a meteor echo, the flag signal is sent to the computer. Then the computer begins to determine the echo range with a time resolution of 1 micro s and to sample every 200 microns/s for 1 s the Doppler signal and echo intensity at the particular range (R). The line-of-sight velocity (V sub D) of the echo trail is calculated from the output from the Doppler signal detection circuit having an offset frequency by using the so-called zero-crossing method. The echo amplitude decay time calculated by a least-mean square method is used to obtain the ambipolar diffusion coefficient (D) and then to calculate the echo height (H). About 120 day observations were made during 1982-1983. Some early results are presented. magnetic tapes together with V sub D, D, H and R for later analysis in Japan. About 120 day observation were made during 1982-1983. Some early results are presented.

Tanaka, T.↗
NASA NTRS1986

Dust distribution of Comet Halley from the Giotto radio science experiment

Measurements from the Giotto radio science experiment representing the Doppler frequency shift and the intensity level of the X-band downlink signal of the Giotto spacecraft during its encounter with comet Halley are shown. Continuous data reception was maintained throughout the encounter. The Doppler shift measured within a time interval of 100 sec is due to drag effects in the cometary atmosphere causing a deceleration of the spacecraft. The total change of velocity of Giotto is 23.2 cm/sec resulting in a best estimate of 0.32 g for the total cometary mass impacting Giotto during the Halley flyby. A dust jet structure for the inner coma of comet Halley is derived. Several sharply confined dust jets are distinguishable; for the most prominent one, characteristic properties are deduced. Features of this jet structure are shown to correlate with measurements from on-board Giotto experiments and with Earth-based observations.

Edenhofer, P.↗
NASA NTRS1991

Interleaving Would Enhance Trellis-Coded Modulation

Interleaving of symbols transmitted via trellis-coded modulation, together with deinterleaving at receiver, reduces "radio" or "noisy-reference" loss encountered in reception. This loss increase in bit-error rate (or, equivalently, decrease in effective signal-to-noise ratio), caused by phase error between received signal and locally generated carrier reference signal used to demodulate received signal.

Divsalar, Dariush↗
NASA NTRS2008

Wide-Band Microwave Receivers Using Photonic Processing

In wide-band microwave receivers of a type now undergoing development, the incoming microwave signals are electronically preamplified, then frequency-up-converted to optical signals that are processed photonically before being detected. This approach differs from the traditional approach, in which incoming microwave signals are processed by purely electronic means. As used here, wide-band microwave receivers refers especially to receivers capable of reception at any frequency throughout the range from about 90 to about 300 GHz. The advantage expected to be gained by following the up-conversion-and-photonic-processing approach is the ability to overcome the limitations of currently available detectors and tunable local oscillators in the frequency range of interest. In a receiver following this approach (see figure), a preamplified incoming microwave signal is up-converted by the method described in the preceeding article. The frequency up-converter exploits the nonlinearity of the electromagnetic response of a whispering gallery mode (WGM) resonator made of LiNbO3. Up-conversion takes place by three-wave mixing in the resonator. The WGM resonator is designed and fabricated to function simultaneously as an electro-optical modulator and to exhibit resonance at the microwave and optical operating frequencies plus phase matching among the microwave and optical signals circulating in the resonator. The up-conversion is an efficient process, and the efficiency is enhanced by the combination of microwave and optical resonances. The up-converted signal is processed photonically by use of a tunable optical filter or local oscillator, and is then detected. Tunable optical filters can be made to be frequency agile and to exhibit high resonance quality factors (high Q values), thereby making it possible to utilize a variety of signal-processing modalities. Therefore, it is anticipated that when fully developed, receivers of this type will be compact and will be capable of both wide-band and narrowband signal processing. Thus, one compact receiver of this type would afford the functionality that, heretofore, could have been obtained only by use of multiple heterodyne microwave receivers.

Matsko, Andrey↗
NASA NTRS1977

Explorer 45 and Imp 6 observations in the magnetosphere of injected waves from the Siple Station VLF transmitter

Results are reported for an experiment in which VLF waves from a transmitter in Antarctica were injected into the magnetosphere along geomagnetic field lines and detected near the magnetic equatorial plane by high-altitude spacecraft. The purpose of this experiment was to conduct a controlled in situ study of VLF wave-particle interactions and to determine the propagation characteristics of the injected waves in the magnetosphere, the regions where VLF emissions are produced, and the effective volume of the magnetosphere illuminated by the transmitter. The results indicate that: (1) the bulk of the satellite receptions occurred during periods of quieting following magnetic disturbances, (2) receptions generally occurred inside the plasmapause, (3) the spacecraft detected predominantly unducted waves, (4) the injected signals could illuminate a large volume of the magnetosphere, and (5) VLF emissions were triggered by nonducted transmitter pulses.

Inan, U. S.↗
NASA NTRS2007

Miniature L-Band Radar Transceiver

A miniature L-band transceiver that operates at a carrier frequency of 1.25 GHz has been developed as part of a generic radar electronics module (REM) that would constitute one unit in an array of many identical units in a very-large-aperture phased-array antenna. NASA and the Department of Defense are considering the deployment of such antennas in outer space; the underlying principles of operation, and some of those of design, also are applicable on Earth. The large dimensions of the antennas make it advantageous to distribute radio-frequency electronic circuitry into elements of the arrays. The design of the REM is intended to implement the distribution. The design also reflects a requirement to minimize the size and weight of the circuitry in order to minimize the weight of any such antenna. Other requirements include making the transceiver robust and radiation-hard and minimizing power demand. Figure 1 depicts the functional blocks of the REM, including the L-band transceiver. The key functions of the REM include signal generation, frequency translation, amplification, detection, handling of data, and radar control and timing. An arbitrary-waveform generator that includes logic circuitry and a digital-to-analog converter (DAC) generates a linear-frequency-modulation chirp waveform. A frequency synthesizer produces local-oscillator signals used for frequency conversion and clock signals for the arbitrary-waveform generator, for a digitizer [that is, an analog-to-digital converter (ADC)], and for a control and timing unit. Digital functions include command, timing, telemetry, filtering, and high-rate framing and serialization of data for a high-speed scientific-data interface. The aforementioned digital implementation of filtering is a key feature of the REM architecture. Digital filters, in contradistinction to analog ones, provide consistent and temperature-independent performance, which is particularly important when REMs are distributed throughout a large array. Digital filtering also enables selection among multiple filter parameters as required for different radar operating modes. After digital filtering, data are decimated appropriately in order to minimize the data rate out of an antenna panel. The L-band transceiver (see Figure 2) includes a radio-frequency (RF)-to-baseband down-converter chain and an intermediate- frequency (IF)-to-RF up-converter chain. Transmit/receive (T/R) switches enable the use of a single feed to the antenna for both transmission and reception. The T/R switches also afford a built-in test capability by enabling injection of a calibration signal into the receiver chain. In order of decreasing priority, components of the transceiver were selected according to requirements of radiation hardness, then compactness, then low power. All of the RF components are radiation-hard. The noise figure (NF) was optimized to the extent that (1) a low-noise amplifier (LNA) (characterized by NF < 2 dB) was selected but (2) the receiver front-end T/R switches were selected for a high degree of isolation and acceptably low loss, regardless of the requirement to minimize noise.

McWatters, Dalia↗