Search NASA⌕ Search

SEARCH · Search NASA

Results for “SINTERED INTERFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Phase identification in boron-containing powder metallurgy steel using EBSD in combination with EPMA

Boron (B) is extensively used to induce liquid phase sintering (LPS) in powder metallurgy (PM) steels and thereby increase the densification. The alloying elements in B-containing PM steels affect the boride phase, stability of the boride, the temperature of liquid formation, and the progress of LPS. However, the boride phase has not been systematically identified yet. The main objective of this study was to clarify the influences of alloying elements, including C, Cr, and Ni, on the boride phases using electron backscatter diffraction (EBSD) in combination with electron probe microanalysis (EPMA). Network structures consisting of ferrite, Fe{sub 2}B boride, and Fe{sub 3}C carbide were extensively observed in the Fe–0.4B–0.5C steel. The portions of Fe{sub 2}B were sufficiently larger than those of Fe{sub 3}C, and Fe{sub 3}C was mostly distributed at the interfaces between ferrite and Fe{sub 2}B. Adding 1.5 wt.% Cr or 1.8 wt.% Ni to Fe–0.4B–0.5C steel completely changes the Fe{sub 2}B and Fe{sub 3}C phases to a M{sub 3}(B,C) phase, where M represents the metallic elements, including Fe, Cr, Mo, and Ni. Furthermore, Cr, Mo, B, and C atoms tend to concentrate on the M{sub 3}(B,C) phase, but Ni atoms do not. - Highlights: • Network structures consisting of ferrite, Fe{sub 2}B boride, and Fe{sub 3}C carbide were extensively observed in the Fe–0.4B–0.5C steel. • Adding 1.5 wt.% Cr or 1.8 wt.% Ni to Fe–0.4B–0.5C steel completely transforms the Fe{sub 2}B and Fe{sub 3}C phases to a M{sub 3}(B,C) phase. • Cr, Mo, B, and C atoms tend to concentrate on the M{sub 3}(B,C) phase, but Ni atoms do not.

36 MATERIALS SCIENCE↗

Enhancing Au/TiO 2 Catalyst Thermostability and Coking Resistance with Alkyl Phosphonic-Acid Self-Assembled Monolayers

Metal oxide-supported Au catalysts, particularly those with small Au nanoparticles, catalyze a variety of reactions including low-temperature CO oxidation and selective hydrogenation of alkynes. However, the facile nature of Au particle growth at even moderate temperatures poses significant challenges to maintaining catalyst activity under reaction conditions. In this paper, we present a method to reduce the rate of sintering and coke formation in TiO 2 -supported Au catalysts via the deposition of alkyl-phosphonic acid (PA) self-assembled monolayers. After surface modification with PAs, the resultant catalysts exhibited significantly improved resistance to Au sintering. PA deposition strongly suppressed CO oxidation rates, consistent with poisoning of active sites. In contrast, modification with PAs significantly improved the rate of C 2 H 2 hydrogenation on Au/TiO 2 . The enhanced activity was accompanied by a dramatically improved resistance to accumulation of surface carbonaceous species.

36 MATERIALS SCIENCE↗

Tuning the spontaneous exchange bias effect in La 1.5 Sr 0.5 CoMnO 6 with sintering temperature

Here, in this study, we present a study of the influence of microstructure on the magnetic properties of polycrystalline samples of the La 1.5 Sr 0.5 CoMnO 6 double perovskite, with primary attention to the spontaneous exchange bias effect, a fascinating recently discovered phenomena for which some materials exhibit unidirectional magnetic anisotropy after being cooled in zero magnetic fields. By sintering La 1.5 Sr 0.5 CoMnO 6 at different temperatures, we obtained samples with distinct average grain sizes, ranging from 1.54-6.65 μm. A detailed investigation of the material's structural, morphologic, electronic, and magnetic properties using x-ray powder diffraction, powder neutron diffraction, x-ray absorption near edge structure spectroscopy, scanning electron microscopy, and ac and dc magnetometry has revealed a systematic enhancement of the exchange bias effect with increasing the average grain size. This evolution is discussed in terms of changes in the material's porosity and grain morphology and its influence on the exchange couplings at the magnetic interfaces.

14 SOLAR ENERGY↗

Earth Abundant High Temperature Materials for Radioisotope Power Conversion System

Advances in high temperature thermoelectric materials were made and published. Two major developments are out lined in this final report. Alkaline earth Zintl phases represent the starting point of a series of compounds selected for development due to their high abundance as the supply chain and as the availability of certain rare earths (i.e. Yb) are limited and can be difficult to obtain. A new Zintl phase, Ca 14 MnSb 11-x Sn x , where Sb is replaced by Sn resulting in changes to the band structure and properties. The structures are investigated by powder diffraction and samples consolidated into fully dense pellets for thermoelectric measurements. The band structure of a reasonable structure, Ca 14 MgSb 7 Sn 4 , is calculated in order to better understand the properties. These Sn containing phases show improved thermoelectric properties over Ca 14 MgSb 11 by increasing the Seebeck while decreasing resistivity without significant impact to the already low thermal conductivity. In addition, a composite phase of Yb 14 MgSb 11 was investigated. Composite phases have been shown to improve both the thermoelectric efficiency and mechanical properties of materials. Here we demonstrate an improved thermoelectric figure of merit, power factor, and mechanical properties for the high-temperature p-type Zintl phase Yb 14 MgSb 11 . Composites with 0, 1, 2, 3, 4, 6, 8 volume % 6 – 10 µm reduced Fe powder were prepared via a fast, scalable mechanical milling and spark plasma sintering procedure. Powder X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that Fe is not incorporated into the Yb 14 MgSb 11 structure. First order reversal curves and scanning electron microscopy images show that the Fe inclusions are larger and closer together with increasing Fe content. Thermogravimetric and differential scanning calorimetry show that the composites are stable up to 1273 K. The elastic constants of the 8 volume % Fe composite were measured by resonant ultrasound spectroscopy and show that Yb 14 MgSb 11 becomes stiffer with increasing Fe volume % and SEM after indentations show crack arresting occurs at the Fe interface. Thermoelectric properties on dense pellets are measured from 300 K – 1273 K. The thermoelectric power factor (PF= $\frac{S^2}{ρ}$) increases with increasing Fe content, with the 8 volume % Fe resulting in 40% higher PF than pristine Yb 14 MgSb 11 . The increase in PF is attributed to a systematic reduction in electrical resistivity. Peak thermoelectric figure of merit (zT= ($\frac{S^2T}{κρ}$) is observed at 3 volume % Fe, an 11% improvement in zT compared to Yb 14 MgSb 11 . Yb 14 MgSb 11 composites with Fe are compatible with Ce 0.9 Fe 3.5 Co 0.5 Sb 12 for thermoelectric generator couple segmentation.

30 DIRECT ENERGY CONVERSION↗

Synthesis of rock-salt type lithium borohydride and its peculiar Li{sup +} ion conduction properties

The high energy density and excellent cycle performance of lithium ion batteries makes them superior to all other secondary batteries and explains why they are widely used in portable devices. However, because organic liquid electrolytes have a higher operating voltage than aqueous solution, they are used in lithium ion batteries. This comes with the risk of fire due to their flammability. Solid electrolytes are being investigated to find an alternative to organic liquid. However, the nature of the solid-solid point contact at the interface between the electrolyte and electrode or between the electrolyte grains is such that high power density has proven difficult to attain. We develop a new method for the fabrication of a solid electrolyte using LiBH{sub 4,} known for its super Li{sup +} ion conduction without any grain boundary contribution. The modifications to the conduction pathway achieved by stabilizing the high pressure form of this material provided a new structure with some LiBH{sub 4}, more suitable to the high rate condition. We synthesized the H.P. form of LiBH{sub 4} under ambient pressure by doping LiBH{sub 4} with the KI lattice by sintering. The formation of a KI - LiBH{sub 4} solid solution was confirmed both macroscopically and microscopically. The obtained sample was shown to be a pure Li{sup +} conductor despite its small Li{sup +} content. This conduction mechanism, where the light doping cation played a major role in ion conduction, was termed the “Parasitic Conduction Mechanism.” This mechanism made it possible to synthesize a new ion conductor and is expected to have enormous potential in the search for new battery materials.

36 MATERIALS SCIENCE↗

The Fabrication of All-Solid-State Lithium-Ion Batteries via Spark Plasma Sintering

Spark plasma sintering (SPS) has been successfully used to produce all-solid-state lithium-ion batteries (ASSLibs). Both regular and functionally graded electrodes are implemented into novel three-layer and five-layer battery designs together with solid-state composite electrolyte. The electrical capacities and the conductivities of the SPS-processed ASSLibs are evaluated using the galvanostatic charge-discharge test. Experimental results have shown that, compared to the three-layer battery, the five-layer battery is able to improve energy and power densities. Scanning electron microscopy (SEM) is employed to examine the microstructures of the batteries especially at the electrode–electrolyte interfaces. It reveals that the functionally graded structure can eliminate the delamination effect at the electrode–electrolyte interface and, therefore, retains better performance.

25 ENERGY STORAGE↗

Combining Electronic and Geometric Effects of ZnO-Promoted Pt Nanocatalysts for Aqueous Phase Reforming of 1-Propanol

Compared with Pt/Al 2 O 3 , sintering-resistant Pt nanoparticle catalysts promoted by ZnO significantly improved the reactivity and selectivity toward hydrogen formation in the aqueous phase reforming (APR) of 1-propanol. The improved performance was found to benefit from both the electronic and geometric effects of ZnO thin films. In situ small-angle X-ray scattering and scanning transmission electron microscopy showed that ZnO-promoted Pt possessed promising thermal stability under APR reaction conditions. In situ X-ray absorption spectroscopy showed clear charge transfer between ZnO and Pt nanoparticles. The improved reactivity and selectivity seemed to benefit from having both Pt-ZnO and Pt-Al 2 O 3 interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication, Microstructures, and Properties of 50 vol.% SiCp/6061Al Composites via Hot Pressing

Nearly fully dense 50 vol.% SiCp/6061Al composites were fabricated via hot pressing (HPing) at temperatures ranging from 610 to 650 °C, with the axial load and holding time fixed as 25 MPa and 120 min, respectively. The interfacial reactions, microstructures, and properties of the SiCp/Al alloy were studied. The interface reaction between SiCp and the Al alloy was suppressed at annealing temperatures of 620 °C and below; however, the reaction intensified as the annealing temperature increased, producing Al{sub 4}C{sub 3}, Si, and Mg{sub 2}Si. With an increase in HPing temperature from 610 to 630 °C, the 6061Al alloy melted and gradually filled the pores in the SiC particles under the applied load. The density, bending strength, and thermal conductivity (TC) of the composites increased, whereas the coefficient of thermal expansion (CTE) of the composites decreased. With an increase in HPing temperature increased from 630 to 650 °C, the 6061Al alloy melt leaked through the sintered bodies, resulting in the microstructural degradation and property reduction of the composites. The 50 vol.% SiCp/6061Al composites fabricated by HPing at 630 °C exhibited optimal comprehensive properties [bending strength, 332.4 MPa; TC, 186.3 W(m K){sup −1}; and CTE, 7.9 × 10{sup −6}/°C (20-100 °C)], which were attributed to the highest relative density and the best SiCp/Al interfacial structure of the composites.

36 MATERIALS SCIENCE↗

Conversion Kinetics and Ionic Conductivity in Na-β”-Alumina + YSZ (Naβ”AY) Sodium Solid Electrolyte via Vapor Phase Conversion Process

Sodium ion batteries have been receiving increasing attention and may see potential revival in the near future, particularly in large-scale grid energy storage coupling with wind and solar power generation, due to the abundant sodium resources, low cost, and sufficiently high energy density. Among the known sodium ion conductors, the Na-β”-alumina electrolyte remains highly attractive because of its high ionic conductivity. This study focuses on the vapor phase synthesis of a Na-β”-Alumina + YSZ (Naβ”AY) composite sodium electrolyte, which has higher mechanical strength and stability than conventional single phase β”-Alumina. The objectives are the measurement of conversion kinetics through a newly developed weight-gain based model and the determination of sodium ionic conductivity in the composite electrolyte. Starting samples contained ~70 vol% α-Alumina and ~30 vol% YSZ (3 mol% Y 2 O 3 stabilized Zirconia) with and without a thin alumina surface layer made by sintering in air at 1600 °C. The sintered samples were placed in a powder of Na-β”-alumina and heat-treated at 1250 °C for various periods. Sample dimensions and weight were measured as a function of heat treatment time. The conversion of α-Alumina in the α-Alumina + YSZ composite into Naβ”AY occurred by coupled diffusion of sodium ions through Na-β”-alumina and of oxygen ions through YSZ, effectively diffusing Na2O. From the analysis of the time dependence of sample mass and dimensions, the effective diffusion coefficient of Na 2 O through the sample, D eff , was estimated to be 1.74 x 10 -7 cm2 s -1 , and the effective interface transfer parameter, k eff , was estimated as 2.33 x 10 -6 cm s -1 . By depositing a thin alumina coating layer on top of the bulk composite, the chemical diffusion coefficient of oxygen through single phase Na-β”-alumina was estimated as 4.35 x 10 -10 cm 2 s -1 . An AC impedance measurement was performed on a fully converted Naβ”AY composite, and the conductivity of the composite electrolyte was 1.3 x 10 -1 S cm -1 at 300 °C and 1.6 x 10 -3 S cm -1 at 25 °C, indicating promising applications in solid state or molten salt batteries at low to intermediate temperatures.

36 MATERIALS SCIENCE↗

Intra-crystalline mesoporous zeolite encapsulation-derived thermally robust metal nanocatalyst in deep oxidation of light alkanes

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications for thermal and environmental catalytic reactions. However, the pore size of the conventional zeolites is usually below 2 nm, and reactants are easily blocked to access the active sites. Herein, a facile in situ mesoporogen-free strategy is developed to design and synthesize palladium (Pd) NPs enveloped in a single-crystalline zeolite (silicalite-1, S-1) with intra-mesopores (termed Pd@IM-S-1). Pd@IM-S-1 exhibited remarkable light alkanes deep oxidation performances, and it should be attributed to the confinement and guarding effect of the zeolite shell and the improvement in mass-transfer efficiency and active metal sites accessibility. The Pd–PdO interfaces as a new active site can provide active oxygen species to the first C–H cleavage of light alkanes. This work exemplifies a promising strategy to design other high-performance intra-crystalline mesoporous zeolite-confined metal/metal oxide catalysts for high-temperature industrial thermal catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composite Structured Surfaces for Durable Dropwise Condensation

Condensation heat transfer is a vital process for a plethora of industrial application. Dropwise condensation of steam on hydrophobic polymers, typified by the formation of discrete water droplets which shed and clear the surface for re-nucleation, has a 10X higher heat transfer coefficient when compared to filmwise condensation on bare metallic surfaces. However, 8 decades of research have conclusively demonstrated a lack of durability of the hydrophobic coatings during dropwise condensation to quantify industrial implementation. They key bottleneck is the coating conundrum, which states that thick hydrophobic coatings (> 10 µm) are required for higher durability, while thin hydrophobic coatings (< 1 µm) are required for low parasitic thermal resistance due to the low intrinsic thermal conductivity of polymeric materials (k ~ 0.1 W/m·K). Here, we attempt to solve the conundrum by developing rationally-designed metal-polymer composite coatings to increase the effective thermal conductivity of the hydrophobic coating, thereby enabling thicker coatings for higher durability. We study nanowire, inverse opal, and sintered sphere metallic structures infilled with hydrophobic polymers. To quantify the heat transfer performance, we analyze the vapor-to-coolant and vapor-to-surface heat transfer coefficients of composite coated flat surfaces having varying wire/sphere diameters (D = 100 nm, 1 μm, 10 μm) and coating thickness (10 nm < t < 100 μm) using three-dimensional (3D), steady state, Comsol simulations. We show that analytical models such as Maxwell or effective medium theory fail to predict the composite thermal conductivity. By conducting simulation with two independent sets of boundary conditions; isothermal surfaces and convection, as well as by varying the interfacial metal fractions, we demonstrate the importance of 3D heat spreading near the coating-vapor and coating-substrate interface. To predict the wetting characteristics to ensure stable dropwise condensation, we coupled our 3D heat transfer simulations to a unified model for contact angle hysteresis on heterogeneous surfaces. Our wetting predictions identify the key tradeoff between low spreading resistance (high k, filmwise condensation) and low contact angle hysteresis (low k, dropwise condensation) on high and low surface metal fractions, respectively, and identify the optimum metallic structure, volume fraction, interfacial solid fraction, and thickness for enhanced durability. Our work provides a novel approach to utilize rational metallic nanostructuring to create composite hydrophobic coatings which promise enhanced durability.

Chang, Ho Chan↗

Controlling Heterogeneous Catalysis with Organic Monolayers on Metal Oxides

A key theme of heterogeneous catalysis research is achieving control of the environment surrounding the active site to precisely steer the reactivity toward desired reaction products. One method toward this goal has been the use of organic ligands or self-assembled monolayers (SAMs) on metal nanoparticles. Metal-bound SAMs are typically employed to improve catalyst selectivity but often decrease the reaction rate as a result of site blocking from the ligands. Recently, the use of metal oxide-bound organic modifiers such as organophosphonic acid (PA) SAMs has shown promise as an additional method for tuning reactions on metal oxide surfaces as well as modifying oxide-supported metal catalysts. In this Account, we summarize recent approaches to enhance catalyst performance with oxide-bound monolayers. These approaches include (1) modification of metal oxide catalysts to tune surface reactions, (2) formation of SAMs on the oxide component of supported metal catalysts to modify sites at the metal–support interface, and (3) enhancement of catalyst performance (e.g., stability) through modification of sites remote from the active sites. Further, both the headgroups and organic tail groups of PA SAMs or other ligands can influence reactions on metal oxide surfaces. Binding of the headgroup can selectively poison certain active sites, altering the selectivity in a manner analogous to metal-bound ligands (at the expense of active site quantity). Moreover, tail groups can be functionalized to interact favorably with reactants and intermediates, for instance through dipole–dipole interactions. On supported metal catalysts like Pt/Al 2 O 3 , PA SAMs can selectively form on the oxide support. This selective deposition allows for modification of the metal–support interface with minimal blockage of metal sites. PA headgroups were shown to provide tunable acid sites at the interface, dramatically improving hydrodeoxygenation rates of various alcohols. Additionally, organic tail functionality was used to activate or stabilize specific reactants at the interface, such as with the use of amine-functionalized PAs to stabilize chemisorption of CO 2 during the reverse water gas shift reaction. PAs have also been found to affect the electronic properties of bulk metal sites through long-range electron withdrawal via the oxide, providing an additional avenue to tune catalytic behavior. Finally, organic modifiers were shown to enhance catalytic performance without directly modifying the active site. For instance, in biphasic liquid environments the modification of catalyst particles with hydrophobic or hydrophilic SAMs shifts the selectivity of multipath reactions on the basis of the hydrophobicities of different intermediates and products. As another “long-range” effect, the deposition of ligands on oxide supports improved catalyst stability through both improved resistance to sintering and suppression of active site poisoning. The recent contributions discussed in this Account demonstrate the versatility and significant potential for the approach of modifying catalysts with oxide-bound organic monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal and electronic charge transport in bulk nanostructured Zr{sub 0.25}Hf{sub 0.75}NiSn composites with full-Heusler inclusions

Bulk Zr{sub 0.25}Hf{sub 075}NiSn half-Heusler (HH) nanocomposites containing various mole fractions of full-Heusler (FH) inclusions were prepared by solid state reaction of pre-synthesized HH alloy with elemental Ni at 1073 K. The microstructures of spark plasma sintered specimens of the HH/FH nanocomposites were investigated using transmission electron microscopy and their thermoelectric properties were measured from 300 K to 775 K. The formation of coherent FH inclusions into the HH matrix arises from solid-state Ni diffusion into vacant sites of the HH structure. HH(1-y)/FH(y) composites with mole fraction of FH inclusions below the percolation threshold, y{approx}0.2, show increased electrical conductivity, reduced Seebeck coefficient and increased total thermal conductivity arising from gradual increase in the carrier concentration for composites. A drastic reduction ({approx}55%) in {kappa}{sub l} was observed for the composite with y=0.6 and is attributed to enhanced phonon scattering due to mass fluctuations between FH and HH, and high density of HH/FH interfaces. - Graphical abstract: Large reduction in the lattice thermal conductivity of bulk nanostructured half-Heusler/full-Heusler (Zr{sub 0.25}Hf{sub 075}NiSn/ Zr{sub 0.25}Hf{sub 075}Ni{sub 2}Sn) composites, obtained by solid-state diffusion at 1073 K of elemental Ni into vacant sites of the half-Heusler structure, arising from the formation of regions of spinodally decomposed HH and FH phases with a spatial composition modulation of {approx}2 nm. Highlights: > Bulk composites from solid state transformation of half-Heusler matrix through Ni diffusion. > Formation of coherent phase boundaries between half-Heusler matrix and full-Heusler inclusion. > Alteration of thermal and electronic transports with increasing full-Heusler inclusion. > Enhanced phonon scattering at half-Heusler/ full-Heusler phase boundaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical Properties and Interfacial Bonding of Overmolded Polymer Composite Lattice Structures

This study investigates the mechanical properties and interfacial bonding of Polyamide 12 filled with Glass Fiber (PA12/GF) lattice structures overmolded with Nylon 66 (PA66) and Thermoplastic Polyurethane (TPU). The PA12/GF lattices, designed in Gyroid, Isotruss, and Octahedral geometries, were produced using the Selective Laser Sintering (SLS) technique. The thermal characteristics of both the lattice and overmolding materials were analyzed using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The mechanical performance and interfacial bonding were evaluated through mechanical testing and microstructural analysis. The results indicate that overmolding improved flexural strength and impact resistance of the PA12/GF lattices. For instance, the plain PA12/GF Isotruss lattice exhibited a flexural strength of 15.5 MPa. By overmolding it with TPU the flexural strength increased by up to 137%, while PA66-overmolding resulted in an increase of 371%, achieving a flexural strength of 73 MPa. In terms of impact resistance, TPU-overmolding improved performance significantly, with an increase of 1800% (Gyroid) compared to the plain lattice. Microstructural analysis revealed good adhesion at the interface, especially when both the lattice and overmolding materials were thoroughly dried prior to the overmolding process to minimize interfacial porosity. This study highlights the potential of using overmolding to enhance lattice structures performance, offering lightweight and cost-efficient solutions for automotive applications.

Talabi, Isaac [ORNL] (ORCID:0000000340215594)↗

Focus Issue: Understanding Water-Oxide Interfaces to Harness New Processes and Technologies. Introduction

Water interaction with metal oxides plays a fundamentally important role across environmental chemistry, geochemistry, catalysis, and in the control and performance of functional nanocrystalline oxides. Water is found virtually everywhere on Earth, from bulk fluid to trace molecules, and its interaction with natural and engineered materials often defines or at least influences a key part of their chemical and physical behavior. In turn, metal oxides play a dominant role as mineral particles across most natural environments, while comprising a compelling and versatile platform for the development of new functional materials with tailored properties that benefit society. Given the intrinsic correlation of their properties to water interactions, it is a common goal across materials and chemical sciences to develop a comprehensive understanding of water adsorption, water film formation, and water-mediated reactions on metal oxide surfaces. This is certainly true in heterogeneous catalysis and electrocatalysis, where water is omnipresent either as a reactant, a medium, an inhibitor or as a trace component in the feed. The effect of water on the morphological evolution during synthesis, particle assembly, and sintering is also important to the stability and functional properties of oxide nanostructures. Such processes are intimately related to how water molecules interact with their surfaces and affect local physical-chemical conditions.

Rosso, Kevin M.↗

Room temperature neutron diffraction and magnetic studies of multiferroic Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} solid solution

The Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} (PBFNO) solid solution was synthesized by single step solid state reaction method and the optimized parameters are 700°C for 2hr (calcination) and 800°C for 3hr (sintering). The formation of desired material was confirmed using X-Ray Diffraction (XRD) and Neutron Diffraction (ND) studies. The structural and magnetic properties of the sintered pellets were investigated at room temperature (RT) through XRD, ND and Magnetic (M-H) studies. The structural analysis was carried out by Rietveld refinement through the Full Prof program. Rietveld refined XRD and ND patterns confirms the monoclinic structure with Cm space group and obtained cell parameters from the ND data are a = 5.651(2) Å, b = 5.658(2) Å, c = 4.005(1) Å and α = 90°, β = 89.98(1)°, γ = 90°. RT M-H curve studies have been carried out. It shows the clear opening of hysteresis (M–H) loop, is evidenced as the existence of weak ferromagnetism at RT. The M-H data shows existence weak ferromagnetism embedded in an antiferromagnetic matrix structure. The dielectric constant with frequency shows the formation of barrier layers at the grain and grain boundary interfaces gives rise to interfacial space charge polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗