Search NASA⌕ Search

SEARCH · Search NASA

Results for “SNR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Maximizing the Radar Generalized Image Quality Equation for Bistatic SAR Using Waveform Frequency Agility

The radar generalized image quality equation (RGIQE) is a metric used to measure both monostatic and bistatic synthetic aperture radar (BSAR) image quality, it is a function of signal-to-noise ratio (SNR) and 2-D bandwidth. The 2-D bandwidth is equal to the area of the transfer function’s (TF) passband region. With the exception of side-looking monostatic geometries, almost all monostatic and bistatic geometries have skewed passband shapes when waveform frequency parameters remain unchanged from pulse to pulse. Most synthetic aperture radar (SAR) applications require a rectangular-shaped passband region, this is achieved by inscribing a rectangular region within the skewed intrinsic passband region. Increasing skewness results in less inscription area reducing 2-D bandwidth, image SNR, and thus RGIQE capacity. In this article, a waveform with frequency agility is used to rectify the skewness that degrades RGIQE capacity. By changing the waveform’s center frequency and instantaneous bandwidth from pulse to pulse in a particular manner, the intrinsic passband region can be de-skewed. The de-skewed shape maximizes the inscription area thus maximizing 2-D bandwidth, image SNR, and RGIQE capacity. Here, three examples are given in this article, one monostatic geometry, and two bistatic geometries. RGIQE capacity is increased by 52.02%, 44.42%, and 79.09% for the three examples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Real-time image denoising of mixed Poisson–Gaussian noise in fluorescence microscopy images using ImageJ

Fluorescence microscopy imaging speed is fundamentally limited by the measurement signal-to-noise ratio (SNR). To improve image SNR for a given image acquisition rate, computational denoising techniques can be used to suppress noise. However, common techniques to estimate a denoised image from a single frame either are computationally expensive or rely on simple noise statistical models. These models assume Poisson or Gaussian noise statistics, which are not appropriate for many fluorescence microscopy applications that contain quantum shot noise and electronic Johnson–Nyquist noise, therefore a mixture of Poisson and Gaussian noise. In this paper, we show convolutional neural networks (CNNs) trained on mixed Poisson and Gaussian noise images to overcome the limitations of existing image denoising methods. The trained CNN is presented as an open-source ImageJ plugin that performs real-time image denoising (within tens of milliseconds) with superior performance (SNR improvement) compared to conventional fluorescence microscopy denoising methods. The method is validated on external datasets with out-of-distribution noise, contrast, structure, and imaging modalities from the training data and consistently achieves high-performance ( > <#comment/> 8 d B ) denoising in less time than other fluorescence microscopy denoising methods.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Evaluation of Advanced Phased-Array Techniques: Interim Results [Slides]

Report: “Evaluation of Advanced Phased-Array Techniques: Interim Results”, August 2023 ML23216A009, PNNL-34622 Results showed that detection rate drops as microstructures/materials become more complex Standard PA had the highest detection rates overall Detection rates in the CASS-CASS mockups were lowest overall FMC had the most accurate length sizing in the fine-grained WSS mockups. All methods struggled with length sizing in coarse-grained mockups SNR vs method depended on the specimen type SNR was consistently high with standard PA SNR was consistently the lowest with PWI FMC performed best on fine-grained WSS A lack of data received from some Round Robin participants resulted in low statistics for many of the analyses.

42 ENGINEERING↗
DOE OSTI2024

Evaluation of Advanced Phased-Array Techniques: Interim Results [Slides]

Report: “Evaluation of Advanced Phased-Array Techniques: Interim Results”, August 2023 ML23216A009, PNNL-34622 Results showed that detection rate drops as microstructures/materials become more complex Standard PA had the highest detection rates overall Detection rates in the CASS-CASS mockups were lowest overall FMC had the most accurate length sizing in the fine-grained WSS mockups. All methods struggled with length sizing in coarse-grained mockups SNR vs method depended on the specimen type SNR was consistently high with standard PA SNR was consistently the lowest with PWI FMC performed best on fine-grained WSS A lack of data received from some Round Robin participants resulted in low statistics for many of the analyses.

42 ENGINEERING↗
DOE OSTI2026

Evaluation of Three Types of Electric Field Sensors

On June 3-4, 2025, we evaluated three types of electric-field (E-field) sensors: capacitive electrodes, stainless-steel stakes, and porous pots - at two electromagnetic (EM) stations (PWBVI and PWAOF) on Aqueduct Mesa at the Nevada National Security Site. We compared calibrated time series and derived metrics including power spectral density, root-mean-square (RMS) amplitude, signal-to-noise ratio (SNR), and detectability of power line harmonics and Schumann resonance. The objective was to identify an alternative E field sensor with higher SNR than the existing capacitive electrodes. Our data demonstrates that stainless-steel electrodes perform best, with the highest SNR and the most consistent detection of power-line harmonics and Schumann resonance among the three sensor types; they may be used as a supplement to, or replacement for, the existing capacitive electrodes.

58 GEOSCIENCES↗
NASA NTRS1972

The 136 MHz/400 MHz earth station antenna-noise temperature prediction program documentation for RAE-B

A simulation study to determine the 136 MHz and 400 MHz noise temperature of the ground network antennas which will track the RAE-B satellite during data transmission periods is described. Since the noise temperature of the antenna effectively sets the signal-to-noise ratio (SNR) of the received signal, a knowledge of SNR will be helpful in locating the optimum time windows for data transmission during low-noise periods. Antenna-noise temperatures at 136 MHz and 400 MHz will be predicted for selected earth-based ground stations which will support RAE-B. The antenna-noise temperature predictions will include the effects of galactic-brightness temperature, the sun, and the brightest radio stars. Predictions will cover the ten-month period from March 1, 1973 to December 31, 1973. The RAE-B mission will be expecially susceptible to SNR degradation during the two eclipses of the Sun occurring in this period.

Chin, M.↗
NASA NTRS1972

X-ray and gamma-ray imaging with multiple-pinhole cameras using a posteriori image synthesis.

In 1968, Dicke had suggested that multiple-pinhole camera systems would have significant advantages concerning the SNR in X-ray and gamma-ray astronomy if the multiple images could be somehow synthesized into a single image. The practical development of an image-synthesis method based on these suggestions is discussed. A formulation of the SNR gain theory which is particularly suited for dealing with the proposal by Dicke is considered. It is found that the SNR gain is by no means uniform in all X-ray astronomy applications.

Groh, G.↗
NASA NTRS1973

Signal-to-noise ratio determination circuit

A signal-to-noise ratio (SNR) determination of an input is described, having signal components within a given frequency range and noise components, without actual measurement of the noise components. Bandpass limiter having a constant signal plus noise output level is connected to the output of the first filter, the signal-to-noise ratio of the input to the bandpass limiter being linearly related to the dbm level of signal components at the output. Calibration is connected to the bandpass limiter and is responsive to the signal components at the output to derive the SNR of the input to the determination circuit. The SNR determination circuit is disclosed for use in a diversity receiver having a plurality of input channels.

Deerkoski, L. F.↗
NASA NTRS1976

A correlation polarimeter for noise-like signals

Optimum estimation (tracking) of the polarization plane of a linearly polarized electromagnetic wave is determined when the signal is a narrow-band Gaussian random process with a polarization plane angle which is also a Gaussian random process. This model is compared to previous work and is applicable to space communication. The estimator performs a correlation operation similar to an amplitude-comparison monopulse angle tracker, giving the name correlation polarimeter. Under large signal-to-noise ratio (SNR), the estimator is causal. Performance of the causal correlation polarimeter is evaluated for arbitrary SNR. Optimum precorrelation filtering is determined. With low SNR, the performance of this system is far better than that of previously developed systems. Practical implementation is discussed. A scheme is given to reduce the effect of linearly polarized noise.

Ohlson, J. E.↗
NASA NTRS1977

Hot interstellar tunnels. I - Simulation of interacting supernova remnants

It has been suggested that intersecting supernova remnants (SNRs) contribute to the production of gas at about 1 million K which is apparently observed in the interstellar medium. This suggestion is evaluated through a fairly detailed numerical simulation that is used to investigate the large-scale three-dimensional behavior of a test section of the gaseous galactic disk under the influence of evolving and interacting SNRs. Models for a noninteracting 'isolated' SNR and the ambient medium are discussed, pairs of interacting remnants are examined along with the mechanism by which their central cavities can become connected, and the evolution of larger aggregates of SNRs is analyzed. Results are presented for a sequence of simulations having the same values of supernova blast energy, ambient ion density, and isolated SNR lifetime, but different supernova rates per unit volume. These results show that SNR intersections can quickly generate large volumes, or 'tunnels', of very hot gas from a cold starting medium under conservative and reasonable assumptions, the most important of which are that SNRs can be treated as spheres and mass motions can be treated implicitly.

Smith, B. W.↗
NASA NTRS1977

Feature discrimination and detection probability in synthetic aperture radar imaging system

Images obtained using synthetic aperture radar (SAR) systems can only represent the intensities of resolution cells in the scene of interest probabilistically since radar receiver noise and Rayleigh scattering of the transmitted radiation are always present. Consequently, when features to be identified differ only by their contribution to the mean power of the radar return, discrimination can be treated by detection theory. In this paper, we develop a 'sufficient statistic' for discriminating between competing features and compare it with some suboptimal methods frequently used. Discrimination is measured by probability of detection error and depends on number of samples or 'looks', signal-to-noise ratio (SNR), and ratio of mean power returns from the competing features. Our results show discrimination and image quality rapidly saturate with SNR (very small improvement for SNR not less than 10 dB) but continue to improve with increasing number of looks.

Lipes, R. G.↗
NASA NTRS1980

Heterodyne signal-to-noise ratios in acoustic mode scattering experiments

The relation between the signal to noise ratio (SNR) obtained in heterodyne detection of radiation scattered from acoustic modes in crystalline solids and the scattered spectral density function is studied. It is shown that in addition to the information provided by the measured frequency shifts and line widths, measurement of the SNR provides a determination of the absolute elasto-optical (Pockel's) constants. Examples are given for cubic crystals, and acceptable SNR values are obtained for scattering from thermally excited phonons at 10.6 microns, with no external perturbation of the sample necessary. The results indicate the special advantages of the method for the study of semiconductors.

Cochran, W. R.↗
NASA NTRS1980

X-ray spectrum of Kepler's supernova remnant

Observations made with the Solid State Spectrometer (SSS) aboard the Einstein Observatory confirm Kepler's SNR as an X-ray source with an intensity between 1 and 3 keV of 7.2 x 10 to the -11th ergs/sq cm s. The X-ray spectrum is similar to those of Cas A and Tycho, with strong line emission from the helium-like species of Si, S, and Ar. Direct comparisons to Tycho's SNR suggest a distance to Kepler's SNR of not less than 5 kpc.

Becker, R. H.↗
NASA NTRS1981

The effect of noisy carrier reference on telemetry with baseband arraying

Imperfect carrier reference causes a degradation in detection performance in coherent communication systems. A measure of this degradation is the radio loss, which is the amount of increase in data signal to noise ratio (SNR) per bit required to achieve the same bit error rate when carrier reference is perfect. Performance analysis and numerical results are obtained for the Voyager high rate telemetry link with maximum likelihood convolutional decoding. The arraying of antennas provides not only improved performance due to an increase in effective antenna aperture, but also a decrease in radio loss with respect to a single antenna. This telemetry link performance improvement is a function of the carrier loop SNR and data bit error rate. When the carrier loop SNR's are low, it provides a significant improvement in the telemetry link performance since the decrease in radio loss with respect to a single station is substantial.

Divsalar, D.↗
NASA NTRS1981

On the correction for quantization effects in signal-to-noise ratio estimation

In sampled data digital telemetry systems the signal to noise ratio (SNR) is typically derived as a function of the moments of the digitized input stream (e.g., the receiver output). This analog to digital conversion process is itself an additional noise source known as the quantization noise. Thus a digitally measured SNR will only approximately represent the SNR of the analog input signal. A procedure (Sheppard's corrections) for correcting moments of any order for this quantization effect is presented.

Howard, L.↗
NASA NTRS1982

Supernovae, young remnants, and nucleosynthesis

Chemical abundance data from extragalactic supernovae and from supernova remnants (SNR) less than 1000 yrs old are employed to show that nuclear burning beyond helium synthesis actually occurs. Supernova (SN) are classified into types I or II, having no hydrogen lines or featuring hydrogen lines, respectively. The SN I's have been observed as having a preponderance of Fe lines, and emitting from a source at around 12,000 K with a center continuum of approximately 10 AU. Decay chains which could account for detected luminosities and spectra are presented, noting a good fit of Fe II spectrum with observed SN spectra. SNR pass through younger and older stages, going from the outpouring of material to diffusion in the interstellar medium. Expanding flocculi from young SNR show oxygen abundances as well as lines from sulfur, calcium, and argon, with a corresponding necessity of an explosive source of 15 solar masses.

Kirshner, R. P.↗
NASA NTRS1982

The effects of ejecta on the X-ray luminosities of supernova remnants

Because X-ray luminosities of most SNRs are dominated by emission from heavy elements, estimates of the X-ray emitting mass based on cosmic abundances may be incorrect. Here we investigate the apparent density evolution of a SNR when substantial amounts of processed material are ejected by the supernova. If this material is shock heated, it will dominate X-ray emission from the remnant long after the SNR has swept up the equivalent amount of interstellar matter (ISM). Emission from metal-rich ejecta may explain why ISM densities of young remnants far from the galactic plane, deduced from standard analysis, are higher than expected, as well as why larger SNRs appear to be lying in regions of lower ISM density. It should be included in detailed calculations of SNR surface brightness distributions, along with effects due to departures from ionization equilibrium and cloudlet evaporation in a multiphase ISM which may also contribute to the apparent evolution of density with radius.

Long, K. S.↗
NASA NTRS1983

The X-ray surface brightness of Kepler's supernova remnant

The first X-ray images of Kepler's supernova remnant (SN Ophiuchi 1604) are presented, and consequences for SNR models are discussed. Observations made with the Einstein Observatory Imaging Proportional Counter and High Resolution Imager show the remnant to be circular, with a strong shell brighter in the north than in the south. A flux of 1.2 x 10 to the -10th ergs/sq cm per sec was measured in the 0.15-4.5 keV region, which corresponds to an X-ray luminosity of 1.0 x 10 to the 36th ergs/sec at a distance of 5 kpc and an interstellar medium density of 2.8 x 10 to the 21st/sq cm. The X-ray observations do not allow the determination of whether the SNR is in the adiabatic or free expansion phase, but in either case it is shown that the mean ISM density must be greater than about 0.1/cu cm. In addition, the density of the X-ray emitting gas must be high, and its electron temperature must be fairly low. The high ISM densities derived for Kepler's SNR and other SNRs thus suggest an atypical ISM, possibly influenced by mass lost from the pre-supernova star.

White, R. L.↗