Search NASA⌕ Search

SEARCH · Search NASA

Results for “Semiconductor device fabrication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Anion diffusion in two-dimensional halide perovskites

Commercialization of halide perovskites in the semiconductor industry is hindered by their short-term stability. The instability of perovskites is closely interlinked with ionic diffusion. Historically, attempts to study diffusion in 2D perovskites mostly utilized electrical characterizations, but these characterizations pose a challenge in deconvoluting the impact of device architecture, interlayers, and ionic species. In this Perspective, we focus our attention on simple optical characterizations employed in the literature to investigate halide diffusion in 2D perovskites using lateral and vertical heterostructure platforms. We review the various synthesis techniques used for fabrication of halide perovskite heterostructures and discuss the qualitative and quantitative diffusion studies performed using these platforms. We discuss the numerical methods used to validate and supplement the experimental halide diffusion kinetics. Finally, we highlight the need to conduct further research on the impact of device operating conditions, lattice structure, and vacancy concentration on halide diffusion. Through this Perspective, we aim to emphasize the need of developing a comprehensive understanding of halide diffusion in perovskites for their successful deployment in optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Toward non-Si electronics: From remote epitaxy to layer splitting of 2D materials for mixed dimensional heterostructures

The current electronics has been mainly dominated by Si-based devices due to their mature processing system and exceptional cost-effectiveness. However, next generation electronics needs novel functionalities that cannot be realized by Si because of intrinsic limitation of Si. Accordingly, demand for non-Si electronics has been getting substantially high. Unfortunately, current methodology requires extremely high cost for non-Si materials, which impedes the progress in developing the non-Si based electronics. Here, I will discuss about our group’s efforts to address this issue. Our team recently conceived a new crystalline growth, termed as “remote epitaxy”, which can copy/paste crystalline information from substrates remotely through graphene, thus generating single-crystalline films on graphene. As interfacial binding energy is attenuated by inserting graphene at interface, the single-crystalline films can be easily exfoliated from the slippery graphene surface. Also, the graphene-coated substrates can be, in principle, reused infinitely to produce single-crystalline films. Thus, the remote epitaxy can produce non-Si semiconductor films with unprecedented cost efficiency while allowing additional flexible device functionality required for current ubiquitous electronics. Next, I will discuss about a layer splitting technique which can be a potential solution to overcome the problem in obtaining large-scale and monolayer 2D materials. A 2D material-based heterostructure has been intensively studied because of its unique device functionalities and novel physics. However, it is extremely challenging to secure large-scale and monolayer 2D materials because of following issues: 1) poor scalability for laboratory fabrication processes of 2D heterostructures and 2) lack of well-defined control parameters for kinetics of 2D materials and predictable number of layers of 2D materials. To resolve this issue, we conceived a new approach called “layer-resolved splitting” which obtains multiple monolayer from multilayer 2D materials by controlling interfacial toughness contrast. As this method is versatile and universal, we can, in principle, apply to all 2D materials. We succeeded in having large-scale, monolayer 2D materials through our approach and, thereby 2D heterostructures were demonstrated for functional devices. Lastly, I would like to discuss opportunities of mixed-dimensional heterostructure demonstrated by remote epitaxy and layer-resolved splitting. As they produce freestanding 3D bulk films and 2D atomic layers, a new type of 3D/2D heterostructures can be realized where a new physics and new device architecture are revealed. Therefore, I believe that a new opportunity will be discovered through the mixed-dimensional heterostructures.

Bae, Sang-Hoon↗
DOE OSTI2021

Imaging Electrons in Two Dimensional Materials (Final report)

Two-dimensional (2D) materials have extraordinary characteristics that offer promising new approaches for science and technology. Electrons in graphene can move ballistically through a sheet, even though it is only a single atom thick. And transition metal dichalcogenide materials can be cleaved into 2D flakes of all types – metals, semiconductors, insulators, magnetic materials, and superconductors. To benefit from these discoveries, the science needs to be understood to transform 2D materials into useful new devices and systems. The evolution in time of atomic scale graphene structures has been studied in time with a transmission electron microscope (TEM), and ballistic transport of electrons in graphene was been imaged using a cooled scanning probe microscope (SPM), as well as electron motion in MoS 2 . Graphene is only one atom thick but is extremely strong, creating the opportunity to fabricate atomic scale structures in the lateral direction. Using an atomic resolution TEM, a suspended sheet of graphene can be shaped by a Si impurity atom on its surface that acts like a chisel to open up apertures, one atom at a time. The electrons in the TEM provide both the chiseling energy and the ability to image the results. Electrons and holes in graphene form a new type of electronic system with conical conduction and valence bands that meet at the Dirac point, with no energy gap. For moderate densities, the carriers form a Fermi liquid with ballistic transport over micron-scale distances. Using a cooled SPM the cyclotron orbit of electrons in graphene has been imaged. In the magnetic focusing regime, electrons leaving a point contact circle around and leave from a second point contact when the cyclotron diameter is equal to the contact spacing. The paths of electrons are focused - they enter at different angles but converge again at the exiting contact. When the SPM tip knocks an electron out of its orbit, an imaging signal is created. The ballistic motion of carriers in graphene opens the way for ballistic devices that manipulate beams of electrons and holes. Our collaborator Gil-Ho Lee, in Philip Kim's group, created a collimating contact by placing zig-zag absorbers on either side of entering electrons. Our cooled SPM was used to image the electron beam and determine its 9-degree halfwidth. By changing the gate voltage, a collimated beam of holes was also created, opening the way for colliding beam experiments. Coherent beams of carriers are desirable for quantum information processing. Via Andreev reflection, superconducting contacts can covert Cooper pairs in a superconductor to an ingoing and outgoing electrons and holes. Using our cooled SPM, Andreev reflection was imaged from a superconducting contact on a graphene device. Magnetic focusing was used to create an incoming beam of electrons and an outgoing beam of holes, detected by a third point contact. The images show a clear transition from normal reflection above the superconducting transition temperature to Andreev reflection as the device is cooled. Transition metal dichalcogenides offer a wide array of materials that can be exfoliated into ultrathin 2D sheets. A cooled SPM can be used to detect quantum dots as well as to image electron flow. The tip charge capacitively couples to electrons on the dot, acting as a gate to tune the dot conductance. Coulomb blockade peaks appear as a bullseye pattern in an SPM image as the tip is raster scanned above the dot. This approach was used to detect quantum dots in a MoS 2 channel as the carrier density was reduced and electrons pooled in low energy points. Through our DOE supported research, cooled SPM imaging has proven to be a very useful tool to uncover the motion of electrons and holes in the new quantum materials graphene and MoS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

TiO 2 /TiN Interface Enables Integration of Ni 5 P 4 Electrocatalyst with a III–V Tandem Photoabsorber for Stable Unassisted Solar-Driven Water Splitting

H 2 production by direct photoelectrochemical (PEC) water splitting has remained unachievable commercially, mainly due to rapid failure at the interface between the photoabsorber(s) and catalyst(s). PEC devices made from multijunction III-V semiconductors with platinum group metal (PGM) catalysts have yielded impressive initial solar-to-H 2 (STH) efficiency >19%, which rapidly corrodes in aqueous electrolytes. Here, TiO 2 /TiN layers were fused to create a bifunctional interface between a GaInP 2 /GaAs III-V tandem photoabsorber and a polycrystalline Ni 5 P 4 HER catalyst. Here, the TiO 2 serves as a conducting corrosion barrier, while a thin layer of much denser TiN (1 nm) blocks interlayer diffusion during fabrication. This strategy allows the elevated temperatures needed to crystallize the Ni 5 P 4 nanoparticles and fuse to the TiO 2 /TiN junction to achieve minimal optical loss without damaging the sensitive photoasbsorber. The resulting photocathode exhibits an initial STH efficiency of 11.4%-13.2% in sodium phosphate electrolyte at neutral pH 7. It operated continuously for over 200 h without failure above 10% STH efficiency, exceeding all previous benchmarks. The earth-abundant Ni 5 P 4 catalyst replaces costly PGM catalysts at comparable HER activity in neutral, acidic, or basic pH electrolytes.

08 HYDROGEN↗
DOE OSTI2021

Studying the Recrystallization of Cu(InGa)Se 2 Semiconductor Thin Films by Silver Bromide In-situ Treatment

Cu(In,Ga)Se 2 samples were fabricated using a 3-stage thermal co-evaporation process on molybdenum back contact at low temperature. The process of recrystallization was carried out in between the 2 nd and 3 rd stages by flashing 25 mg of AgBr for 2 minutes. A change in morphological structure was observed as small grains transformed into large grains, as confirmed by XRD and SEM measurements. The decrease of the Ga gradient, seen in the SIMS depth profile, suggests Ga interdiffusion due to AgBr treatment. Altogether, the AgBr treatment contributes to a general improvement in device performance as compared to the as-deposited devices.

14 SOLAR ENERGY↗
DOE OSTI2020

High yield production of ultrathin fibroid semiconducting nanowire of Ta 2 Pd 3 Se 8

Immediately after the demonstration of the high-quality electronic properties in various two dimensional (2D) van der Waals (vdW) crystals fabricated with mechanical exfoliation, many methods have been reported to explore and control large scale fabrications. Comparing with recent advancements in fabricating 2D atomic layered crystals, large scale production of one dimensional (1D) nanowires with thickness approaching molecular or atomic level still remains stagnant. Here, we demonstrate the high yield production of a 1D vdW material, semiconducting Ta 2 Pd 3 Se 8 nanowires, by means of liquid-phase exfoliation. The thinnest nanowire we have readily achieved is around 1 nm, corresponding to a bundle of one or two molecular ribbons. Transmission electron microscopy (TEM) and transport measurements reveal the as-fabricated Ta 2 Pd 3 Se 8 nanowires exhibit unexpected high crystallinity and chemical stability. Our low-frequency Raman spectroscopy reveals clear evidence of the existing of weak inter-ribbon bindings. The fabricated nanowire transistors exhibit high switching performance and promising applications for photodetectors.

1D semiconductor↗
DOE OSTI2023

Determination of Thermal Damage Threshold in THz Photomixers Using Raman Spectroscopy

The increase of device lifetime and reliability of THz photomixers will play an essential role in their possible future application. Therefore, their optimal work conditions/operation range, i.e., the maximal incident optical power should be experimentally estimated. We fabricated and tested THz photomixer devices based on nitrogen-implanted GaAs integrated with a Bragg reflector. Raman spectroscopy was applied to investigate the material properties and to disclose any reversible or irreversible material changes. The results indicate that degradation effects in the photomixer structures/material could be avoided if the total optical power density does not exceed levels of about 0.7 mW/µm 2 for 100 min of operation. Furthermore, the investigations performed during 1000 min of optical exposure on the photomixer devices’ central region comprising interdigitated metal-semiconductor-metal (MSM) structures suggest a reversible “curing” mechanism if the power density level of ~0.58 mW/µm 2 is not exceeded. Long-term operation (up to 1000 h) reveals that the photomixer structures can withstand an average optical power density of up to ~0.4 mW/µm 2 without degradation when biased at 10 V. Besides the decrease of the position of the A1g (LO) Raman mode from ~291 cm -1 down to ~288 cm -1 with increasing optical power density and operation time, broad Raman modes evolve at about 210 cm -1 , which can be attributed to degradation effects in the active photomixer/MSM area. In addition, the performed carrier lifetime and photomixer experiments demonstrated that these structures generated continuous wave sub-THz radiation efficiently as long as their optimal work conditions/operation range were within the limits established by our Raman studies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bioadhesive polymer semiconductors and transistors for intimate biointerfaces

The use of bioelectronic devices relies on direct contact with soft biotissues. For transistor-type bioelectronic devices, the semiconductors that need to have direct interfacing with biotissues for effective signal transduction do not adhere well with wet tissues, thereby limiting the stability and conformability at the interface. Here we report a bioadhesive polymer semiconductor through a double-network structure formed by a bioadhesive brush polymer and a redox-active semiconducting polymer. The resulting semiconducting film can form rapid and strong adhesion with wet tissue surfaces together with high charge-carrier mobility of ~1 square centimeter per volt per second, high stretchability, and good biocompatibility. Further fabrication of a fully bioadhesive transistor sensor enabled us to produce high-quality and stable electrophysiological recordings on an isolated rat heart and in vivo rat muscles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Atomic Drill Bit: Precision Controlled Atomic Fabrication of 2D Materials

The ability to deterministically fabricate nanoscale architectures with atomic precision is the central goal of nanotechnology, whereby highly localized changes in the atomic structure can be exploited to control device properties at their fundamental physical limit. Here, an automated, feedback-controlled atomic fabrication method is reported and the formation of 1D–2D heterostructures in MoS 2 is demonstrated through selective transformations along specific crystallographic orientations. The atomic-scale probe of an aberration-corrected scanning transmission electron microscope (STEM) is used, and the shape and symmetry of the scan pathway relative to the sample orientation are controlled. The focused and shaped electron beam is used to reliably create Mo 6 S 6 nanowire (MoS-NW) terminated metallic-semiconductor 1D–2D edge structures within a pristine MoS 2 monolayer with atomic precision. From these results, it is found that a triangular beam path aligned along the zig-zag sulfur terminated (ZZS) direction forms stable MoS-NW edge structures with the highest degree of fidelity without resulting in disordering of the surrounding MoS 2 monolayer. Density functional theory (DFT) calculations and ab initio molecular dynamic simulations (AIMD) are used to calculate the energetic barriers for the most stable atomic edge structures and atomic transformation pathways. These discoveries provide an automated method to improve understanding of atomic-scale transformations while opening a pathway toward more precise atomic-scale engineering of materials.

2D materials↗
DOE OSTI2024

Metal Oxide vs Organic Semiconductor Charge Extraction Layers for Halide Perovskite Indoor Photovoltaics

Halide perovskite indoor photovoltaics (PVs) are highly promising to autonomously power the billions of microelectronic sensors in the emerging and disruptive technology of the Internet of Things (IoT). However, how the wide range of different types of hole extraction layers (HELs) impacts the indoor light harvesting of perovskite solar cells is still elusive, which hinders the material selection and industrial–scale fabrication of indoor perovskite photovoltaics. In the present study, new insights are provided regarding the judicial selection of HELs at the buried interface of halide perovskite indoor photovoltaics. This study unravels the detrimental and severe light–soaking effect of metal oxide transport layer–based PV devices under the indoor lighting effect for the first time, which then necessitates the interface passivation/engineering for their reliant performance. This is not a stringent criterion under 1 sun illumination. By systematically investigating the charge carrier dynamics and sequence of measurements from dark, light–soaked, interlayer–passivated device, the bulk and interface defects are decoupled and reveal the gradual defect passivation from shallow to deep level traps. Thus, the present study puts forward a useful design strategy to overcome the deleterious effect of metal oxide HELs and employ them in halide perovskite indoor PVs.

14 SOLAR ENERGY↗
DOE OSTI2022

Properties and device performance of BN thin films grown on GaN by pulsed laser deposition

Wide and ultrawide-bandgap semiconductors lie at the heart of next-generation high-power, high-frequency electronics. Here, in this paper, we report the growth of ultrawide-bandgap boron nitride (BN) thin films on wide-bandgap gallium nitride (GaN) by pulsed laser deposition. Comprehensive spectroscopic (core level and valence band x-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman) and microscopic (atomic force microscopy and scanning transmission electron microscopy) characterizations confirm the growth of BN thin films on GaN. Optically, we observed that the BN/GaN heterostructure is second-harmonic generation active. Moreover, we fabricated the BN/GaN heterostructure-based Schottky diode that demonstrates rectifying characteristics, lower turn-on voltage, and an improved breakdown capability (~234 V) as compared to GaN (~168 V), owing to the higher breakdown electrical field of BN. Our approach is an early step toward bridging the gap between wide and ultrawide-bandgap materials for potential optoelectronics as well as next-generation high-power electronics.

42 ENGINEERING↗
DOE OSTI2020

The surface of halide perovskites from nano to bulk

The surface of a semiconductor often has a key role in determining its properties. Here, for metal halide perovskites, understanding the surface features and their impact on the materials and devices is becoming increasingly important. At length scales down to the nanoscale regime, surface features become dominant in regulating the properties of perovskite materials, owing to the high surface-to-volume ratio. For perovskite bulk films in the micrometre range, defects and structural disorder readily form at the surface and affect device performance. Through concerted efforts to optimize processing techniques, high-quality perovskite thin films can now be fabricated with monolayer-like polycrystalline grains or even single crystals. Surface defects therefore remain the major obstacle to progress, pushing surface studies to the forefront of perovskite research. In this Review, we summarize and assess recent advances in the understanding of perovskite surfaces and surface strategies towards improving perovskite materials and the efficiency and stability of perovskite devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Metal Halides Treatment on High Throughput Low Temperature CIGS Solar Cells

Copper indium gallium diselenide (CIGS) semiconductor thin films were deposited at high rate and low temperature using single-stage thermal co-evaporation process on molybdenum back contact. A post deposition treatment was done by flashing AgBr at 350 ºC to induce recrystallization. Changes in morphology were confirmed by SEM, with an observed increase in grain size, as well as by XRD measurements, with a decrease in FWHM. Device results show an improvement of the performance after the AgBr vapor treatment, as all the photovoltaic parameters enhanced. Altogether, AgBr seems to be a suitable transport agent and beneficial for device fabrication.

14 SOLAR ENERGY↗
DOE OSTI2022

Post-deposition Metal Halide Treatment of CuGaSe 2 for Photovoltaic Application

Copper gallium diselenide (CGS) semiconductor thin films were deposited by three-stage thermal co-evaporation process. Post-deposition treatments and recrystallization were performed at various AgBr doses of 40 mg, 60 mg, and 80 mg after the 2 nd stage. The changes in surface morphology were confirmed by SEM. The electrical properties were also modified, as the resistivity of the film decreases with increasing doses. Here, the device performance after the treatment did not change as expected, as the overall device performance only slightly increases in the case of 60 mg of AgBr. Substantial changes in the fabrication process will therefore be required for better device results.

14 SOLAR ENERGY↗
DOE OSTI2022

Induced Superconducting Pairing in Integer Quantum Hall Edge States

Indium arsenide (InAs) near surface quantum wells (QWs) are promising for the fabrication of semiconductor–superconductor heterostructures given that they allow for a strong hybridization between the two-dimensional states in the quantum well and the ones in the superconductor. In this work, we present results for InAs QWs in the quantum Hall regime placed in proximity of superconducting NbTiN. We observe a negative downstream resistance with a corresponding reduction of Hall (upstream) resistance, consistent with a very high Andreev conversion. Further, we analyze the experimental data using the Landauer-Büttiker formalism, generalized to allow for Andreev reflection processes. We attribute the high efficiency of Andreev conversion in our devices to the large transparency of the InAs/NbTiN interface and the consequent strong hybridization of the QH edge modes with the states in the superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Achieving environmental stability in an atomically thin quantum spin Hall insulator via graphene intercalation

Atomic monolayers on semiconductor surfaces represent an emerging class of functional quantum materials in the two-dimensional limit — ranging from superconductors and Mott insulators to ferroelectrics and quantum spin Hall insulators. Indenene, a triangular monolayer of indium with a gap of ~ 120 meV is a quantum spin Hall insulator whose micron-scale epitaxial growth on SiC(0001) makes it technologically relevant. However, its suitability for room-temperature spintronics is challenged by the instability of its topological character in air. It is imperative to develop a strategy to protect the topological nature of indenene during ex situ processing and device fabrication. Here we show that intercalation of indenene into epitaxial graphene provides effective protection from the oxidising environment, while preserving an intact topological character. Our approach opens a rich realm of ex situ experimental opportunities, priming monolayer quantum spin Hall insulators for realistic device fabrication and access to topologically protected edge channels.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of metal diffusion, lattice distortions, native defects, and ambient on dielectric breakdown in Ni–Ga 2 O 3 Schottky diodes

Ga 2 O 3 unipolar devices are of high interest due to their ~8 MV/cm predicted breakdown fields, which have not yet been achieved due to premature device failure. Pre- and post-failure defect analysis of Ni–Ga 2 O 3 Schottky diodes in ultrahigh vacuum (UHV) and air were performed using depth-resolved cathodoluminescence, high angle annular dark field scanning transmission electron microscopy, and energy dispersive x-ray analysis to understand the physical mechanisms that precede premature breakdown. The breakdown voltage in UHV was dramatically reduced by nearly 40% compared with the breakdown in air. This reduction in the breakdown voltage correlated with post-breakdown differences in Ni distribution, indicating that the coordination and bonding of Ni contribute strongly to electrical behavior in Ni–Ga 2 O 3 Schottky diodes. Breakdown studies in UHV revealed that Ni diffuses away more from the metal–semiconductor interface than with air breakdown, where Ni localizes more near the interface, indicative of the preferential formation of a Ni oxide under O-poor conditions. These measurements also identified the formation of divacancy-interstitial complexes and their characteristic luminescence signature ~150 nm from the interface, the densities of which correlated with breakdown fields. These findings show that electric-field-induced degradation occurs via the rearrangement of native point defects, which act as an additional precursor to device failure. Macroscopically, they show the impact of both vacuum conditions and metal reactivity on Ga 2 O 3 device fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A sensitive and robust thin-film x-ray detector using 2D layered perovskite diodes

Solid-state radiation detectors, using crystalline semiconductors to convert radiation photons to electrical charges, outperform other technologies with high detectivity and sensitivity. Here, we demonstrate a thin-film x-ray detector comprised with highly crystalline two-dimensional Ruddlesden-Popper phase layered perovskites fabricated in a fully depleted p-i-n architecture. It shows high diode resistivity of 10 12 ohm·cm in reverse-bias regime leading to a high x-ray detecting sensitivity up to 0.276 C Gy air –1 cm –3 . Such high signal is collected by the built-in potential underpinning operation of primary photocurrent device with robust operation. The detectors generate substantial x-ray photon–induced open-circuit voltages that offer an alternative detecting mechanism. Furthermore, our findings suggest a new generation of x-ray detectors based on low-cost layered perovskite thin films for future x-ray imaging technologies.

47 OTHER INSTRUMENTATION↗