Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Deriving iceberg ablation rates using an on-iceberg autonomous phase-sensitive radar (ApRES)

Abstract The increase in iceberg discharge into the polar oceans highlights the importance of understanding how quickly icebergs are deteriorating and where the resulting freshwater injection is occurring. Recent advances in quantifying iceberg deterioration through combinations of modeling, remote sensing and direct in situ measurements have successfully calculated overall ablation rates, and surface and sidewall ablation; however, in situ measurements of basal melt rates have been difficult to obtain. Radar has successfully measured iceberg thickness, but repeat measurements, which would capture a change in iceberg thickness with time, have not yet been collected. Here we test the applicability of using an on-iceberg autonomous phase-sensitive radar (ApRES) to quantify basal ablation rates of a large (~800 m long) non-tabular Arctic iceberg during an intensive 2019 summer field campaign in Sermilik Fjord, southeast Greenland. We find that ApRES can be used to measure basal ablation even over a short deployment period (10 d), and also provide a lower bound on sidewall melt. This study fills a critical gap in iceberg research and pushes the limits of field instrumentation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Quasi-In-Situ Analysis of Electrode Top Atomic Layers via High-Sensitivity Low-Energy Ion Scattering and Potential-Controlled Sample Transfer

Electrocatalytic reactions involve interfacial interactions between the surfaces of electrodes and reactive species at an electrolyte interface. There are presently no universal or unambiguous methods to directly assay the active top atomic layer composition that influences the reactivity of these electrodes under relevant operating conditions. Low-energy ion scattering (LEIS) spectroscopy is a surface characterization technique that yields compositional analysis of the outermost atomic layer of a material, but it must be performed in ultrahigh vacuum (UHV). Application of LEIS measurements to electrochemical materials that are removed from ambient liquid-phase environments thus leaves an open question as to whether the surface that is transferred to UHV is truly the surface that manifested during the electrochemical reaction. Toward the goal of preserving the active surface state, we developed a sample transfer workflow for LEIS enabling air-free removal and drying of an electrode from an electrochemical cell while maintaining control of the potential using an auxiliary electrode. The potential-controlled emersion method was demonstrated to give distinct potential-dependent surface compositions for a Cu−Pd alloy relative to removal after uncontrolled return to open-circuit potential. A Cu-enriched surface was found at anodic potential and a Pd-enriched surface at cathodic potential, suggesting that the approach can be used to retain representative atomic configurations during transfer. Since adsorbates will often persist from the reaction environment, conventional sample pretreatment methods for removal, including atomic O and atomic H exposure, were also contrasted. Both methods were found to differ with results from incidental low-dose depth profiling by the LEIS primary ion source, which removes adventitious species and surface atoms during the course of repeated measurements. These depth profiles were found to be sensitive to sample history and thus qualitatively informative, despite the possible changes induced by ion damage. The results exhibit (i) the need for complete control over the polarization state of the sample at all times (no excursions to open circuit during transfer) and (ii) the utility of low-dose depth profiling to capture changes in the near-surface composition.

Alloys↗
DOE OSTI2024

Assessing the Sensitivity of Pourbaix Diagrams to Computational Protocols: Electrochemical Stability of Ni Oxides as a Case Study

Pourbaix diagrams stand as a useful tool in assessing and visualizing materials’ electrochemical stability and are widely used for electrocatalyst design. However, their reliability hinges on the accuracy of the chemical potentials of involved phases, which may bear uncertainties and can be significantly impacted by decision-making steps in the computational protocol. Here, this study introduces a robust sensitivity analysis framework, exemplified through a detailed examination of the computational Pourbaix diagram of Ni, the oxides of which are used as high-activity and cost-friendly catalysts for many electrochemical reactions. Quantities of interest derived from the Pourbaix diagram include the appearance and stability domain of the catalytically active Ni oxide phases along with the onset electrochemical potentials of phase transitions. These metrics can guide the design of operational conditions for Ni oxide electrocatalysts. We find that the employed DFT exchange-correlation functional has the most significant influence on the computed Pourbaix diagram. Uncertainties on crystal structures, along with their related ab initio energetics, are also found to affect the size of the phase stability domain. Higher-order coupling among input parameters is found to play a crucial role in influencing the appearance and distribution of Ni phases in the diagram. Our findings suggest a need to consider variations and uncertainties associated with the computational procedures on predicted Pourbaix diagrams for materials design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Surface Carboxylate Sensitivity to Electron and Hole Relaxation in Photoexcited Cadmium Sulfide Nanocrystals

Understanding how passivating surface ligands couple to excitonic states in nanocrystal photocatalysts is crucial for controlling nonradiative relaxation pathways which compete with interfacial charge transfer. Here, we report femtosecond transient infrared (IR) spectroscopy to resolve ∼100 fs ligand-exciton coupling between 1S exciton states in oleate-capped cadmium sulfide (CdS) nanocrystals and vibrational modes of surface carboxylates. Differential mid-IR spectra show distinct negative amplitude and positive photoinduced absorption signals at ∼1540 cm –1 (carboxylate asymmetric stretch) and ∼1440 cm –1 (carboxylate symmetric stretch), respectively. Fluence-dependent transient IR measurements reveal that the symmetric stretch is uniquely sensitive to picosecond Auger recombination, while the asymmetric stretch shows no analogous decay. Our results provide direct measurement of femtosecond ligand-exciton coupling in CdS nanocrystals and demonstrate how surface-bound carboxylate ligands serve as carrier-specific reporters of nanocrystal photophysics. Furthermore, these findings offer critical insights for designing and developing predictive models for ligand-mediated strategies in next-generation nanocrystal photocatalysts.

Cadmium sulfide↗
DOE OSTI2024

Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, in this study, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of similar to 15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solution-Processed Temperature-Adaptive Radiative Paint as a Thermal Imaging Sensitizer

Thermography detects mid-infrared radiation from surfaces based on the Stefan-Boltzmann law, mapping surface temperatures and potentially revealing subsurface thermal activity. Recent developments offer an alternative strategy to traditional camera-based improvements: a thermal imaging sensitizer (TIS) coating whose emissivity increases sharply with local temperature, amplifying small thermal variations into high-contrast signals. Existing TIS structures are nanofabricated solid membranes and face significant challenges in fabrication complexity. Here, in this study, we present a solution-processed, liquid form of TIS, termed temperature-adaptive radiative paint (TARP), to address these limitations. TARP offers drastically reduced fabrication costs, scalability to large areas, applicability to curved surfaces, and an extended operating temperature range, while maintaining the function of temperature amplification. Application of TARP enhances small temperature contrast by more than 3 times, substantially improving ambient thermography and enabling broader applications such as detection of structural defects and hot spots in electronic components.

paint↗
DOE OSTI2026

Plasmons Enable Ultralow Threshold Solid-State Triplet Fusion Upconversion with a 2D Sensitizer

Solid-state triplet−triplet annihilation (TTA) upconversion has significant potential for application in light harvesting, optoelectronic devices, and bioimaging. However, the high optical powers required to achieve efficient upconversion have inhibited its adoption. In this work, we demonstrate plasmon-enhanced near-infrared (NIR)-to-blue TTA upconversion in a monolayer WSe2/organic heterojunction. Under far-field excitation, the device reaches a threshold of 19 mW/cm 2 and an external quantum efficiency (EQE) of 0.17% with an anti-Stokes shift of 1.1 eV. Plasmon excitation lowers the threshold to 0.9 mW/cm 2 and improves the EQE to 3.6%. We attribute the plasmon enhancement to surface plasmon polariton (SPP) near-field enhancement and dark-exciton absorption. Optimization of the WSe 2 transfer process is identified as a key factor for the device performance. This work demonstrates that plasmon excitation overcomes the low far-field absorption of 2D transition-metal dichalcogenide (TMD) sensitizers. Consequently, monolayer TMDs can achieve solid-state upconversion with a performance among the best reported.

2D materials↗
DOE OSTI2025

Unraveling the Structural Sensitivity of Metal Catalysts in Ethylene Hydroformylation: Insights from Theory and Experiments

Here, in this study, we combined experimental and theoretical methods to investigate the structural sensitivity of metal catalysts in the ethylene hydroformylation reaction. Among Rh, Pt, Ir, Ni, Au, Ag, Pd, and Cu catalysts studied using experimental and theoretical methods, Rh showed the highest selectivity toward the C-C coupling product from CO and C 2 H 5 (i.e., C 2 H 5 CHO). The results from DFT and microkinetic simulations revealed that the activation energy barrier for C-C coupling is lowest on the Rh nanocluster, which explains the experimentally observed highest C 2 H 5 CHO selectivity on the Rh catalyst. Furthermore, DFT results demonstrated that the sites located on the flat surfaces of nanoparticles primarily promote the hydrogenation reaction, leading to the formation of undesired C 2 H 6 . In contrast, undercoordinated edge and corner sites of the nanocluster promote the C-C coupling reaction. Thus, our results illustrate that the selectivity toward C 3 oxygenates in ethylene hydroformylation reaction can be steered by tuning the size of Rh nanoparticles (the best-performing catalyst) to optimize the active (edge and corner) sites that preferentially promote the C-C coupling reaction.

58 GEOSCIENCES↗
DOE OSTI2025

High-Sensitivity NO 2 Gas Sensor: Exploiting UV-Enhanced Recovery in a Hexadecafluorinated Iron Phthalocyanine-Reduced Graphene Oxide

Monitoring ultralow nitrogen dioxide (NO 2 ) concentrations is crucial for air quality management and public health. However, the existing NO 2 gas sensors have several defects, like high cost and power consumption, and exhibit poor selectivity. This study addresses these challenges by presenting a novel hexadecafluorinated iron phthalocyanine-reduced graphene oxide (FePcF 16 -rGO) covalent hybrid sensor for NO 2 detection. This innovative approach, which overcomes the limitations of fabrication cost, energy efficiency, and gas selectivity, is a significant step forward in gas sensor technology. The sensor demonstrates exceptional sensitivity toward ultralow NO 2 concentrations (15.14% response for 100 ppb) with a rapid 60 s UV light-induced recovery. Additionally, the sensor exhibits high selectivity for NO 2 , achieving a limit of detection (LOD) of 8.59 ppb. This approach paves the way for developing cost-effective, energy-efficient, and miniature NO 2 monitoring devices for improved environmental monitoring and enhanced safety in workplaces where NO 2 exposure is a concern.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Solvatochromic Near Infrared Fluorophore Sensitive to the Full Amyloid Beta Aggregation Pathway

Alzheimer's disease has long been associated with the aggregation of amyloid beta peptides (Aβ42) into macroscale plaques, although specific neurodegenerative agents have not been definitively identified. Much evidence has pointed to the soluble nanoscale oligomers that form early in the Aβ42 aggregation pathway, but there is little understanding of these structures, their mechanisms of formation, or how they grow into plaques. Here, we show that a solvatochromic fluorophore with near-infrared (NIR) emission can track synthetic Aβ42 aggregation through environment-sensitive spectral shifts from the earliest time points through plaque formation. This azide-functionalized phosphine oxide azetidine rhodol (Phazr-N3) shows large polarity-dependent changes in fluorescence emission, with maxima shifting from 630 nm in toluene to 703 nm in aqueous buffer, and a maximum quantum yield of 62%. Upon induction of Aβ42 aggregation, we observe immediate solvatochromic changes in Phazr-N3 fluorescence, with multiple apparent phases over 12 h, and which culminate before the onset of any major fluorescence changes of conformation-specific aggregation fluorophore thioflavin T. Solution anisotropy measurements show a low micromolar affinity of Phazr-N3 for disordered, free Aβ42 in solution, and real-time measurements are consistent with rapid liquid-liquid phase separation and slow dehydration of the growing aggregate. Spectral imaging of synthetic plaques stained in the presence of live cells and lipid-binding protein albumin shows over 4000-fold Phazr-N3 fluorescence intensity above background under no-wash conditions, and over 100-fold intensity above coplated microglial cells or a large excess of albumin. This use of a solvatochromic probe with structure-independent binding to free Aβ42 offers real-time, minimally invasive insight into the full Aβ42 aggregation pathway.

Wang, Zeming↗
DOE OSTI2026

Precursor-Dependent Routing of Aromatic Amino Acids Determines Lignin Structure in Grasses by Sensitivity-Enhanced Solid-State NMR

Lignin biosynthesis in grasses exhibits unique metabolic flexibility, yet the precursor-specific routing of carbon into lignin polymers remains poorly resolved in planta. Here, we combine 13 C-isotope labeling with solid-state NMR under sensitivity-enhancement by dynamic nuclear polarization (DNP), to directly track phenylalanine- and tyrosine-derived carbon incorporation into the lignin polymer in Brachypodium distachyon. Precursor-specific 13 C labeling reveals that phenylalanine is the dominant contributor to canonical guaiacyl and syringyl lignins, whereas tyrosine preferentially enriches hydroxyphenyl lignin and hydroxycinnamates, including ferulates characteristic of grass cell walls. Two-dimensional 13 C− 13 C correlation NMR resolves distinct lignin moieties arising from each precursor. Disruption of pcoumarate 3-hydroxylase (C3H) selectively impairs phenylalanine-derived lignification, while tyrosine-derived lignin remains comparatively unchanged, maintaining polymer assembly through alternative metabolic routes. These findings show precursordependent control of lignin composition and reveal tyrosine-mediated lignification as a compensatory pathway in grasses. This work also establishes precursor-resolved solid-state NMR and DNP as a powerful framework for dissecting lignin biosynthesis and metabolic plasticity in plant cell walls.

Biopolymers↗
DOE OSTI2024

Sensitive Response of Atmospheric Oxidative Capacity to the Uncertainty in the Emissions of Nitric Oxide (NO) From Soils in Amazonia

Abstract Soils are a major source of nitrogen oxides, which in the atmosphere help govern its oxidative capacity. Thus the response of soil nitric oxide (NO) emissions to forcings such as warming or forest loss has a meaningful impact on global atmospheric chemistry. We find that the soil emission rate of NO in Amazonia from a common inventory is biased low by at least an order of magnitude in comparison to tower‐based observations. Accounting for this regional bias decreases the modeled global methane lifetime by 1.4%–2.6%. In comparison, a fully deforested Amazonia, representing a 37% decrease in global emissions of isoprene, decreases methane lifetime by at most 4.6%, highlighting the sensitive response of oxidation rates to changes in emissions of NO compared to those of terpenes. Our results demonstrate that improving our understanding of soil NO emissions will yield a more accurate representation of atmospheric oxidative capacity.

Geology↗
DOE OSTI2025

High sensitivity pressure and temperature quantum sensing in pentacene-doped p-terphenyl single crystals

Quantum sensors’ responsiveness to their physical environment enables detection of variables such as temperature (T), pressure (P), and strain. We present a molecular platform for PT sensing using para-terphenyl crystals doped with pentacene (PDP), leveraging optically detected magnetic resonance (ODMR) of photoexcited triplet electron spins. We observe maximal frequency variations of df/dP=1.8 MHz/bar from 0-8 bar and df/dT=247 kHz/K from 79–330 K, over 1200 times and threefold greater, respectively, than those seen with nitrogen-vacancy centers in diamond and > 85-fold greater pressure sensitivity over the previous record. Density functional theory calculations indicate picometer-level PT-induced molecular orbital shifts are measurable via ODMR. PDP offers additional advantages including high sensor doping levels, narrow ODMR linewidths, high contrast, and low-cost single crystal growth. Overall, this work reports low-cost, optically-interrogated PT sensors and lays the foundation for increased versatility of quantum sensors through synthetic molecular design.

Magnetic properties and materials↗
DOE OSTI2024

Sensitive proton-radiation detectors

In this study, halide perovskite nanocrystal scintillators detect high-energy protons with sensitivity suitable for clinical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Historical sensible-heat-flux variations key to predicting future hydrologic sensitivity

Under anthropogenic climate change (CC), the global hydrological cycle intensifies at a rate known as hydrologic sensitivity (HS). Global climate models (GCMs) exhibit substantial uncertainty in HS. Past work suggests that another form of HS, derived from internal climate variability (IV), is useful for constraining this uncertainty. However, these two forms of HS are weakly related. Here we show that decomposing HS under both CC and IV, based on the global energy budget, provides insight into the likely range of future HS. We find that sensible heat exchange between the atmosphere and ocean is not accounted for in the atmospheric energy budget under IV, masking the connection between HS under IV and CC. Removing this term, a closer relationship emerges. We use observations in conjunction with this relationship to suggest an upward shift in the likely range of future HS (66% confidence interval: 2.00–2.36 W m -2 K -1

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Prototype-Wise Sensitivity Analysis of Urban Building Energy Simulation Surrogate Modeling Accuracy

Urban Building Energy Modeling (UBEM) is an important reference for urban energy-related policymaking. Because of the significant impact of urban microclimates on the energy simulation, UBEM requires simulations of many microclimate-prototype pairs. Surrogate modeling is commonly used to reduce the cost of simulation computations. In UBEM surrogate modeling, it is important to determine the percentage of microclimates related to a prototype used for generating surrogate model training data. This study analyzes the prototype-wise variations and sensitivities of surrogate model estimation accuracy to the microclimate sampling ratios. The results of the study can help determine the number of simulations used for generating surrogate modeling data, avoid redundant simulations, and reduce the computational cost for UBEM surrogate modeling and its time.

Pan, Xiyu↗
DOE OSTI2025

Sensitivity of the magnetic axis to variations in the magnetic field

Lagrangian variational principles are used to locate the magnetic axis and to determine its sensitivity to variations in the magnetic field. Only the change in the magnetic field on axis is required to determine, to lowest order, the location of the new magnetic axis. Using a simple example, namely, the magnetic field produced by a set of current-carrying filaments (a.k.a. coils), the variation in the coil geometry that induces the largest change in the magnetic axis is determined using singular value decomposition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Laser beam pointing stabilization using analog position-sensitive diodes

Laser wire scanners have been used for ion beam profile and emittance measurements at the Spallation Neutron Source linear accelerator. Due to propagation distances exceeding 100 m, reliable measurements require laser beam stabilization, previously accomplished with a feedback control loop using a digital camera as a position sensor [Hardin et al., Opt. Express 19, 2874 (2011)]. Here, this paper presents an upgraded pointing stabilization system utilizing analog position-sensitive diodes (PSDs) as the position detector, optimized with an optical diffuser. The new system significantly surpasses the previous system by offering an order-of-magnitude improvement in radiation tolerance and a bandwidth limited only by the burst repetition rate of the laser beam. Operating with a 60-Hz burst mode laser, the new system effectively suppresses laser beam drifts up to 30 Hz, compared to the previous system’s 4 Hz limit. In addition, the amplitude of spectral components below 0.1 Hz was reduced by a factor of more than 100, which is over seven times greater than was achieved by the previous system.

Data acquisition↗