Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shock capturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A study of methods which predict supersonic flow fields from body geometry, distance, and Mach number

A study of seven methods for predicting flow-field pressure signatures from the parameters Mach number, body geometry, and field-path distance has been made. The methods included the method of characteristics, which served as a standard of comparison; a shock-capturing method; three Whitham theory methods; a modified characteristics method; and a bicharacteristics method. Results from each method were also compared with recently obtained wind-tunnel data for a cone-cylinder model at Mach numbers of 2.96 and 4.63 with ratios of radial distance to cone length of 2 and 5. The comparisons at a Mach number of 2.96 showed that signatures from all the methods correlated well with wind-tunnel data and with the signatures predicted by the method of characteristics. At a Mach number of 4.63, however, the agreement between the signatures obtained in the wind tunnel and those predicted by theory varied from good to poor, as did the agreement between the signatures obtained by the method of characteristics and the other six methods. It should be noted that these results and comparisons indicate pressure prediction capabilities only for the near-field flow about bodies of revolution.

Mack, R. J.↗
NASA NTRS1974

On the shock-on-shock interaction problem

The unsteady, inviscid flowfield that results when a supersonic vehicle strikes a planar oblique shock wave, though difficult to simulate experimentally, is quite easy to model and compute numerically. The complicated flowfield, which contains multiple shock wave interactions, is determined using a second-order, shock-capturing, finite-difference approach which solves the time-dependent Euler equations under a self-similar transformation. A series of numerical results for a simple two-dimensional wedge is presented which describes the entire disturbed region, including the wave structure, and shows good agreement with the available two- and three-dimensional experimental data.-

Kutler, P.↗
NASA NTRS1975

Supercritical wing sections 2, volume 108

A mathematical theory for the design and analysis of supercritical wing sections was previously presented. Examples and computer programs showing how this method works were included. The work on transonics is presented in a more definitive form. For design, a better model of the trailing edge is introduced which should eliminate a loss of fifteen or twenty percent in lift experienced with previous heavily aft loaded models, which is attributed to boundary layer separation. How drag creep can be reduced at off-design conditions is indicated. A rotated finite difference scheme is presented that enables the application of Murman's method of analysis in more or less arbitrary curvilinear coordinate systems. This allows the use of supersonic as well as subsonic free stream Mach numbers and to capture shock waves as far back on an airfoil as desired. Moreover, it leads to an effective three dimensional program for the computation of transonic flow past an oblique wing. In the case of two dimensional flow, the method is extended to take into account the displacement thickness computed by a semi-empirical turbulent boundary layer correction.

Bauer, F.↗
NASA NTRS1975

Numerical solutions for inviscid supersonic corner flows

Analytical solutions for inviscid supersonic corner flows are virtually nonexistent due to the complexity of the interference geometry. In view of this, numerical solutions for compressive-compressive and expansive-compressive corner flows are obtained. The governing equations are written in strong conservation-law form and are solved iteratively in nonorthogonal conical coordinates by use of a second-order, shock-capturing, finite-difference technique. The computed wave structure and surface pressure distributions are compared with high Reynolds number (Re greater than 2,500,000 ft) experimental data. The results clearly show that the wave structure in the corner is dominated by the inviscid field.

Shankar, V. S. V.↗
NASA NTRS1975

Numerical solutions for supersonic corner flow

Analytical solutions for inviscid supersonic corner flows are virtually nonexistent due to the complexity of the interference geometry. In view of this, numerical solutions for swept-compressive and swept-expansive corner flows are obtained. The governing equations are written in strong conservation-law form and are solved iteratively in nonorthogonal conical coordinates by use of a second-order, shock-capturing, finite-difference technique. The computed wave structure and surface pressure distributions are compared with high Reynolds number experimental data and show very good agreement. The results clearly show that supersonic corner flow at reasonably high Reynolds numbers including the effect of sweep is dominated by the inviscid field.

Shankar, V.↗
NASA NTRS1976

Diffraction of a shock wave by a compression corner. I - Regular reflection

The unsteady, two-dimensional flowfield resulting from the interaction of a moving planar shock wave with a compression corner is determined using a second-order, discontinuity-fitting, finite-difference approach. The time-dependent Euler equations are transformed to normalize the distance between the body and peripheral shock and to include the existing self-similar property of the flow. The resulting set of partial differential equations in conservation-law form is then solved in a time-dependent fashion using MacCormack's scheme. The vortical singularity, which lies on the body surface, and the single reflected shock are both treated as discontinuities in the numerical procedure. The results of the numerical simulation compare quite favorably with existing experimental interferograms and yield better flowfield resolution than previous first-order, shock-capturing, numerical solutions.

Kutler, P.↗
NASA NTRS1976

Diffraction of a shock wave by a compression corner; regular and single Mach reflection

The two dimensional, time dependent Euler equations which govern the flow field resulting from the injection of a planar shock with a compression corner are solved with initial conditions that result in either regular reflection or single Mach reflection of the incident planar shock. The Euler equations which are hyperbolic are transformed to include the self similarity of the problem. A normalization procedure is employed to align the reflected shock and the Mach stem as computational boundaries to implement the shock fitting procedure. A special floating fitting scheme is developed in conjunction with the method of characteristics to fit the slip surface. The reflected shock, the Mach stem, and the slip surface are all treated as harp discontinuities, thus, resulting in a more accurate description of the inviscid flow field. The resulting numerical solutions are compared with available experimental data and existing first-order, shock-capturing numerical solutions.

Vijayashankar, V. S.↗
NASA NTRS1977

Diffraction of a shock wave by a compression corner. II - Single Mach reflection

The two-dimensional time-dependent Euler equations which govern the flow field resulting from the interaction of a planar shock with a compression corner are solved for initial conditions which result in single Mach reflection of the incident planar shock. The Euler equations are first transformed to include the self-similarity of the flow field. A second transformation is employed to normalize the distances between the ramp and the reflected shock and between the wall and the Mach stem. The resulting equations in strong conservation-law form are solved using a second-order discontinuity-fitting finite-difference approach. The results are compared with experimental interferograms and existing first-order shock-capturing numerical solutions.

Shankar, V.↗
NASA NTRS1977

Comparison of numerical and experimental 'conical' flow fields in supersonic corners with compression and/or expansion

The flow field produced by the intersection of two plane solid surfaces in a supersonic stream is a complex interference flow. These flows can be fully compressive, fully expansive, or of mixed compression-expansion nature. This paper presents a comparison of the experimentally obtained flow-field structure in an axial corner with that predicted numerically by using a shock-capturing finite-difference method. The effect of sweep and surface deflection are evaluated, and the general influence of each is presented for the three classes of corner flow. The results show that the numerical method is a valuable aid in understanding the flow structure for simple configurations. In addition, confidence in the numerical method is gained for use in solving more general three-dimensional configurations where the flow is nonconical and several wave interaction may be presented.

Anderson, D. A.↗
NASA NTRS1978

Transonic flow over the NACA 64A006 with an oscillating flap-calculations based on the Euler equations

Exploratory calculations of transonic flows over the airfoil with a quarter-chord oscillating flap were made using a program which obtains approximate solutions to the Euler equations with an explicit, shock-capturing, finite-difference scheme. The calculations, essentially inviscid and for the airfoil at zero angle-of-attack in a free-stream, are at Mach numbers and reduced frequencies which were tested in experiments by Tijdeman. The oscillatory lifts from analogus calculations by various investigators generally agree with one another better than they agree with Tijdeman's data. Inclusion in the calculations of an approximate modelling of boundary conditions expected at slotted wind tunnel walls tends to shift some of the results closer to the experimental values.

Magnus, R. J.↗
NASA NTRS1978

Numerical solution of the Navier-Stokes equations for arbitrary blunt bodies in supersonic flows

A time-dependent, two-dimensional Navier-Stokes code employing the body-fitted coordinate technique has been developed for supersonic flows past blunt bodies of arbitrary shape. The computer program is based on the finite-difference approximation of the compressible Navier-Stokes equations transformed to nonorthogonal curvilinear coordinates with the contravariant components of the velocity vector as dependent variables. The bow shock ahead of the body is obtained as part of the solution, by 'shock capturing'. Numerical solutions of the complete equations are presented in detail for free-stream Mach number 4.6, Reynolds number 10,000, and an isothermal wall temperature of 556 K for a circular cylinder with the free-stream outer boundaries forming a hyperbola in the front and a circular arc in the back.

Warsi, Z. U. A.↗
NASA NTRS1980

Calculation of two-dimensional inlet flow fields in a supersonic free stream by an implicit marching code with nonorthogonal mesh generation: User's manual

An implicit, shock-capturing finite-difference code which is used to calculate two-dimensional inlet flow fields in a supersonic free stream is explained. The Euler equations are subjected to general nonorthogonal transformation and a body-fitted coordinate system is employed. The mathematical formulation of the problem is given along with the numerical algorithm. Initial and boundary conditions, numerical stability, program limitations, and accuracy is discussed. An overall program logic as well as instructions for program use and operation are also furnished.

Biringen, S. H.↗
NASA NTRS1980

A supersonic, three-dimensional code for flow over blunt bodies: User's manual

A computer code is described which may be used to calculate the steady, supersonic, three-dimensional, inviscid flow over blunt bodies. The theoretical and numerical formulation of the problem is given (shock-capturing, downstream marching), including exposition of the boundary and initial conditions. The overall flow logic of the program, its usage, accuracy, and limitations are discussed.

Chaussee, D. S.↗
NASA NTRS1980

Computational models for the viscous/inviscid analysis of jet aircraft exhaust plumes

Computational models which analyze viscous/inviscid flow processes in jet aircraft exhaust plumes are discussed. These models are component parts of an NASA-LaRC method for the prediction of nozzle afterbody drag. Inviscid/shock processes are analyzed by the SCIPAC code which is a compact version of a generalized shock capturing, inviscid plume code (SCIPPY). The SCIPAC code analyzes underexpanded jet exhaust gas mixtures with a self-contained thermodynamic package for hydrocarbon exhaust products and air. A detailed and automated treatment of the embedded subsonic zones behind Mach discs is provided in this analysis. Mixing processes along the plume interface are analyzed by two upgraded versions of an overlaid, turbulent mixing code (BOAT) developed previously for calculating nearfield jet entrainment. The BOATAC program is a frozen chemistry version of BOAT containing the aircraft thermodynamic package as SCIPAC; BOATAB is an afterburning version with a self-contained aircraft (hydrocarbon/air) finite-rate chemistry package. The coupling of viscous and inviscid flow processes is achieved by an overlaid procedure with interactive effects accounted for by a displacement thickness type correction to the inviscid plume interface.

Dash, S. M.↗
NASA NTRS1980

Calculation of inlet flow fields by an implicit technique

Two-dimensional inlet flow fields in a supersonic free stream are calculated by an implicit, shock-capturing, finite-difference method. The Euler equations are subjected to a general curvilinear transformation and a body-fitted coordinate system is employed. The method is used to solve supercritical, critical, and subcritical flow fields which are simulated by prescribing appropriate conditions at the inlet outflow boundary. Results are presented for a drooped-cowl inlet.

Biringen, S.↗
NASA NTRS1981

Perturbation of transonic flow with shocks

A general formulation of the perturbation problem is studied, and a new approach, perturbation sequence expansion, is introduced for handling shock disturbances. The method is applied to unsteady effects, three-dimensional corrections to axisymmetric and two-dimensional flows, and wind tunnel corrections. The perturbation equations are nonlinear and can be solved by shock capturing methods.

Hafez, M.↗
NASA NTRS1982

Improvement of Rocket Engine Plume Analysis Techniques

A nozzle plume flow field code was developed. The RAMP code which was chosen as the basic code is of modular construction and has the following capabilities: two phase with two phase transonic solution; a two phase, reacting gas (chemical equilibrium reaction kinetics), supersonic inviscid nozzle/plume solution; and is operational for inviscid solutions at both high and low altitudes. The following capabilities were added to the code: a direct interface with JANNAF SPF code; shock capturing finite difference numerical operator; two phase, equilibrium/frozen, boundary layer analysis; a variable oxidizer to fuel ratio transonic solution; an improved two phase transonic solution; and a two phase real gas semiempirical nozzle boundary layer expansion.

Smith, S. D.↗
NASA NTRS1982

Computation of blast wave-obstacle interactions

Numerical simulations of the interaction of a planar blast wave with various obstacles are presented. These obstacles are either ground structures or vehicles flying in the atmosphere. For a structure on the ground, the blast wave encounter is side-on, while for the flying vehicles the encounter is either head-on or oblique. Second-order accurate, finite-difference, and shock-capturing procedures are employed to solve the two-dimensional, axisymmetric, and three-dimensional unsteady Euler equations. Results are presented for the flow field consisting of blast wave striking obstacles that are at rest, moving subsonically and moving supersonically. Comparison of the numerical results with experimental data for a configuration at rest substantiates the validity of this approach and its potential as a flow analysis tool.

Champney, J. M.↗