Search NASA⌕ Search

SEARCH · Search NASA

Results for “Soil heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Measuring Wildfires From Aircraft And Satellites

Aircraft and satellite systems yield wide-area views, providing total coverage of affected areas. System developed for use aboard aircraft includes digital scanner that records data in 12 channels. Transmits data to ground station for immediate use in fighting fires. Enables researchers to estimate gaseous and particulate emissions from fires. Provides information on temperatures of flame fronts and soils, intensities and rate of spread of fires, characteristics of fuels and smoke plumes, energy-release rates, and concentrations and movements of trace gases. Data relates to heating and cooling of soils, loss of nutrients, and effects on atmospheric, terrestrial, and aquatic systems.

Brass, J. A.↗
NASA NTRS1991

Multispectral satellite data in the context of land surface heat balance

Multispectral satellite data are demonstrated to be an important potential contributor to the understanding and completeness of heat balance analysis. Satellite observations are presented, including visible, near-IR, IR, and microwave bands, which estimate surface characteristics and surface fluctuations. The relationship of the interannual variations of the satellite data and the land surface changes is discussed. It is shown that spatially representative values of global fluxes and parameters from multispectral data can consistently enhance the results of heat balance analysis. Daily net radiation can be estimated with a 10 percent error, while the error for albedo would be higher. Computations for all heat fluxes except the latent heat flux are shown. Soil moisture and surface temperature estimates can be derived from microwave and IR observations, respectively. Spectral reflectances in the visible and near-IR bands are suggested as important heat-balance indices for future consideration.

Choudhury, Bhaskar J.↗
DOE OSTI2024

Large emissions of CO2 and CH4 due to active-layer warming in Arctic tundra: Supporting Data

Climate warming may accelerate decomposition of Arctic soil carbon, but few controlled experiments have manipulated the entire active layer. To determine surface-atmosphere fluxes of carbon dioxide and methane under anticipated end-of-century warming, we used heating rods to warm soil (by 3.8 °C) to the depth of permafrost in polygonal tundra over two growing seasons at the Barrow Environmental Observatory in Utqiaġvik (formerly Barrow), Alaska. This data product includes supporting data for the companion paper entitled "Large emissions of CO2 and CH4 due to active-layer warming in Arctic tundra", published in Nature Communications by Torn et al. This data package contains seven data files in csv format with corresponding data dictionaries and file-level metadata, describing vegetation biomass dry weight ("Utqiagvik_Vegetation_Biomass_2014.csv"), radiocarbon measurements of respired carbon dioxide ("Utqiagvik_Radiocarbon_2015_2016.csv"), surface-atmosphere fluxes of carbon dioxide and methane and associated soil temperature ("Utqiagvik_Fluxes_Temperature_2015_2016.csv"), and soil temperature measurements averaged every 15-min and 1-hr for 2015 and 2016 ("Utqiagvik_Temperature_15min_2015.csv", "Utqiagvik_Temperature_15min_2016.csv", "Utqiagvik_Temperature_1hr_2015.csv", "Utqiagvik_Temperature_1hr_2016.csv"). There are no specific software requirements to use these data. UIC Science Native Corporation facilitated our scientific research on the Barrow Environmental Observatory, which is Iñupiat land.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

Annual Cycle of Planetary Boundary Layer Heights estimated from NOAA Profiler Network Data

The Planetary Boundary Layer (PBL) height over the Unites States Great and Central Plains during 1992-2012 is examined here using a combination of Wind Profiler-derived (WP) PBL height estimates and reanalysis fields from the Modern Era Retrospective Reanalysis Version 2 (MERRA-2). The combined analysis allows process study of the reasons behind the monthly mean behavior of the observed PBL heights under clear-sky conditions as well as the PBL height variability. WP PBL height monthly mean annual cycles were grouped into general categories of behavior, each analyzed using MERRA-2 fields of sensible and latent heat flux, surface temperature, net radiation and soil moisture. In the ’canonical’ category the latent heat plays little role in the determination of the monthly mean PBL height, and it follows the annual cycle of the net radiation. In the other categories, precipitation and latent heat flux had more influence in setting the annual cycle. An analysis of variance revealed that the role of latent heat in determining the PBL height variations is large (explaining up to 40% of PBL height variability) even in the ’canonical’ category for which latent heat played no role in setting the monthly mean. In other categories the latent heat explained up to 80% of the PBL height variations. The amount of that influence is shown to be related to the variability of column soil moisture.

MERRA-2↗
DOE OSTI2025

A 1 km soil moisture dataset over eastern CONUS generated by assimilating SMAP data into the Noah-MP land surface model

An improved fine-scale soil moisture (SM) dataset at 1 km grid spacing, covering much of the eastern continental US, was generated by assimilating 9 km Soil Moisture Active Passive (SMAP) SM data into the v4.0.1 Noah-MP land surface model. With 12 ensemble members, the assimilation was carried out using the ensemble Kalman filter algorithm within NASA's Land Information System. The SM analysis for 2016 was fully validated against in situ observations from four different networks and compared with four other existing datasets. Results indicate that this SM analysis surpasses other datasets in top-layer SM distribution, including a machine-learning-based product, despite all SM estimates being less heterogeneous than observed. The analysis of anomalous errors suggests that large similarity in intrinsic errors is likely due to overlapping data sources among the selected SM datasets. More detailed evaluations were performed over two geographic areas. The observations collected by the Atmospheric Radiation Measurement facility in Oklahoma suggest that soil temperature and surface heat fluxes are concurrently simulated with good accuracy. Investigation into the 2016 southeastern US drought response further indicates drier conditions and higher evapotranspiration estimates compared to GLEAMv4.1. Notably, large errors are associated with grids having clay soil textures, underscoring the need for refined model treatments for specific soil types to further improve SM estimates. The dataset is publicly available on Zenodo at https://doi.org/10.5281/zenodo.14370563 (Tai et al., 2024).

Tai, Sheng-Lun [Pacific Northwest National Laborat↗
NASA NTRS1985

Influence of spatial variability of hydraulic characteristics of soils on surface parameters obtained from remote sensing data in infrared and microwaves

The correct interpretation of thermal and hydraulic soil parameters infrared from remotely sensed data (thermal infrared, microwaves) implies a good understanding of the causes of their temporal and spatial variability. Given this necessity, the sensitivity of the surface variables (temperature, moisture) to the spatial variability of hydraulic soil properties is tested with a numerical model of heat and mass transfer between bare soil and atmosphere. The spatial variability of hydraulic soil properties is taken into account in terms of the scaling factor. For a given soil, the knowledge of its frequency distribution allows a stochastic use of the model. The results are treated statistically, and the part of the variability of soil surface parameters due to that of soil hydraulic properties is evaluated quantitatively.

Brunet, Y.↗
DOE OSTI2022

Coupling subsurface and above-surface models for optimizing the design of borefields and district heating and cooling systems in the presence of varying water-table depth. In: Proceedings, 46th Workshop on Geothermal Reservoir Engineering

Dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange. Current modeling approaches in building and district energy simulation tools typically consider heat conduction through the ground between boreholes, without flow of groundwater. On the other hand, detailed simulation tools for subsurface heat and mass transfer exist, but these fall short in simulating above-surface energy systems. To support the design and operation of such systems, we have developed a coupled model including a software package for building and district energy simulation, and software for detailed heat and mass transfer in the ground. For the first, we use the open-source Modelica Buildings Library, which includes dynamic simulation models for building and district energy and control systems. For the heat and mass transfer in the soil, we use the TOUGH simulator. TOUGH can model heat and multi-phase, multi-component mass transport for a variety of fluid systems, as well as chemical reactions, in fractured porous media. In previous work, we described the coupling of these software packages, including how time-dependent boundary conditions for the borehole walls are synchronized for use in Modelica and TOUGH. We verified that the coupled Modelica/TOUGH code produced consistent results with the original Modelica code for an idealized problem in which heat transfer was purely by conduction in a uniform geologic medium. Here, we examine less idealized problems for which TOUGH’s advanced capabilities for modeling fluid flow are required. The first problem has a shallow vadose zone, and the second problem has a thicker vadose zone with a water-table depth that varies in time, which requires a fine vertical grid discretization for the TOUGH model.

Doughtry, Christine↗
NASA NTRS2022

Thermal Hydraulic Disaggregation of SMAP Soil Moisture Over the Continental United States

Thermal Hydraulic disaggregation of Soil Moisture (THySM) algorithm was implemented to downscale NASA’s Soil Moisture Active Passive (SMAP) Enhanced soil moisture (SM) product to 1 km over the continental United States (CONUS). This algorithm was developed by combining thermal inertia theory with a soil hydraulic-based approach that considers fine-scale SM spatial distribution driven by both heat fluxes and hydraulic conductivity in soils. Relative soil wetness values were estimated using land surface temperature and normalized difference vegetation index for the thermal inertia model and using soil properties for the hydraulic model. The relative soil wetness values at 1 km from both models were then combined by using weighting functions whereby the spatial distribution of SM was governed more by thermal fluxes during times of strong heat transport and infiltration during moisture abundant soil conditions. THySM values were evaluated using in situ SM measurements from SMAP Core Validation Sites (CVS), the USDA Soil Climate Analysis Network, and the NOAA Climate Reference Network over CONUS. THySM shows higher accuracy than the SMAP / Sentinel-1 (SPL2SMAP_S) 1 km SM product when compared to in situ measurements. The accuracy of THySM is 0.048 m3/m3 based on unbiased root mean square error (ubRMSE), outperforming SPL2SMAP_S by 0.01-0.02 m3/m3. The ubRMSE of THySM 1km SM over the SMAP grassland/rangeland-dominated CVS sites is better than 0.04 m3/m3, which meets the SMAP mission SM accuracy requirement applied at 9 and 36 km.

SMAP↗
NASA NTRS1983

A pyroloysis technique for determining microamounts of hydrogen in lunar soil using the helium ionization detector

A method has been developed which will determine hydrogen in sub-milligram samples of lunar soil. It consists of heating the sample in a pyroprobe followed by the gas chromatographic determination of hydrogen using the helium ionization detector. Using a 7 foot, 1/8 OD stainless steel column packed with Carbosieve S, 120/140 mesh, hydrogen was well-separated from the other gases released from lunar soil. Standards of hydrogen in helium were used for calibration. The limit to detection under the conditions used was about 2 ng. The method was linear from 2 ng to 270 ng. The method was checked using some actual lunar samples. Results were typical of those obtained for lunar soils using other methods.

Bustin, R.↗
NASA NTRS1985

A transient heating event in the history of a highlands troctolite from Apollo 12 soil 12033

A 2-mm particle, consisting of a troctolite clast attached to a small amount of glassy soil breccia, was found in a thin section of grains from Apollo 12 sample 12033,66. A description is given of the evolutionary history of the troctolite, taking into account the unique texture. It appears that the particle was broken from its parent rock and projected to Oceanus Procellarum from a source area in the highlands. Before, during, or after the flight, the troctolite was welded to a soil breccia by a minor amount of melting along the contact. It is argued that two separate heating events may be involved. The hypothesis is considered that the partial remelting and quenching of the troctolite took place very rapidly. Attention is given to melting experiments which test and confirm this hypothesis.

Marvin, U. B.↗
NASA NTRS2022

Compound Heat and Moisture Extreme Impacts on Global Crop Yields Under Climate Change

Extreme heat, drought and moisture excess are increasingly co-occurring within a single growing season, impacting crop yields in global breadbasket regions. In this Review, we synthesize understanding of compound heat and moisture extremes, their impacts on global crop yields and implications for adaptation. Heat and moisture extremes and their impacts become compounded through crop-physiological interactions, heat–moisture couplings in the climate system and crop–atmosphere interactions. Since around 2000, these compound extremes, and hot droughts in particular, have been linked to especially poor harvests (up to 30% yield losses) in regions such as India, Ethiopia, the USA, Europe and Russia. However, in some cases, combinations of crop stresses might generate compensating effects. Compound extremes are projected to increase in frequency and amplitude in the future, but, owing to the biophysical interdependence among temperature, water and crop physiology, the net yield effects of such future compound extremes remain uncertain. Accordingly, compound extremes will necessitate comprehensive agricultural adaptation strategies geared towards multi-stress resilience, as adaptations that work for single climate stresses could be maladaptive under combined stresses. An integrated understanding of heat and water in soil–plant–atmosphere dynamics is urgently needed to understand risks and suitably adapt cropping systems to compounding climate impacts.

Agroecology↗
NASA NTRS1993

Thermal Analyzer for Planetary Soil (TAPS): an in Situ Instrument for Mineral and Volatile-element Measurements

Thermal Analyzer for Planetary Soil (TAPS) offers a specific implementation for the generic thermal analyzer/evolved-gas analyzer (TA/EGA) function included in the Mars Environmental Survey (MESUR) strawman payload; applications to asteroids and comets are also possible. The baseline TAPS is a single-sample differential scanning calorimeter (DSC), backed by a capacitive-polymer humidity sensor, with an integrated sampling mechanism. After placement on a planetary surface, TAPS acquires 10-50 mg of soil or sediment and heats the sample from ambient temperature to 1000-1300 K. During heating, DSC data are taken for the solid and evolved gases are swept past the water sensor. Through ground based data analysis, multicomponent DSC data are deconvolved and correlated with the water release profile to quantitatively determine the types and relative proportions of volatile-bearing minerals such as clays and other hydrates, carbonates, and nitrates. The rapid-response humidity sensors also achieve quantitative analysis of total water. After conclusion of soil-analysis operations, the humidity sensors become available for meteorology. The baseline design fits within a circular-cylindrical volume less than 1000 cm(sup 3), occupies 1.2 kg mass, and consumes about 2 Whr of power per analysis. Enhanced designs would acquire and analyze multiple samples and employ additional microchemical sensors for analysis of CO2, SO2, NO(x), and other gaseous species. Atmospheric pumps are also being considered as alternatives to pressurized purge gas.

Gooding, J. L.↗
NASA NTRS2014

Connecting Returned Apollo Soils and Remote Sensing: Application to the Diviner Lunar Radiometer

The Diviner Lunar Radiometer, onboard NASA's Lunar Reconnaissance Orbiter, has produced the first global, high resolution, thermal infrared observations of an airless body. The Moon, which is the most accessible member of this most abundant class of solar system objects, is also the only body for which we have extraterrestrial samples with known spatial context, returned Apollo samples. Here we present the results of a comprehensive study to reproduce an accurate simulated lunar environment, evaluate the most appropriate sample and measurement conditions, collect thermal infrared spectra of a representative suite of Apollo soils, and correlate them with Diviner observations of the lunar surface. It has been established previously that thermal infrared spectra measured in simulated lunar environment (SLE) are significantly altered from spectra measured under terrestrial or martian conditions. The data presented here were collected at the University of Oxford Simulated Lunar Environment Chamber (SLEC). In SLEC, we simulate the lunar environment by: (1) pumping the chamber to vacuum pressures (less than 10‐4 mbar) sufficient to simulate lunar heat transport processes within the sample, (2) cooling the chamber with liquid nitrogen to simulate radiation to the cold space environment, and (3) heating the samples with heaters and lamp to set‐up thermal gradients similar to those experienced in the upper hundreds of microns of the lunar surface. We then conducted a comprehensive suite of experiments using different sample preparation and heating conditions on Apollo soils 15071 (maria) and 67701 (highland) and compared the results to Diviner noontime data to select the optimal experimental conditions. This study includes thermal infrared SLE measurements of 10084 (A11 - LM), 12001 (A12 - LM), 14259 (A14 - LM), 15071 (A15 - S1), 15601 (A15 - S9a), 61141 (A16 - S1), 66031 (A16 - S6), 67701 (A16 - S11), and 70181 (A17 - LM). The Diviner dataset includes all six Apollo sites at approximately 200 m spatial resolution We find that analyses of Diviner observations of individual sampling stations and SLE measurements returned Apollo soils show good agreement, while comparisons to thermal infrared reflectance under ambient conditions do not agree well, which underscores the need for SLE measurements and validates the Diviner compositional measurement technique.

Greenhagen, B. T.↗
NASA NTRS1987

Measurements of surface energy budgets in the rocky mountains of Colorado

The surface energy balance of a mountain valley and a mountain peak were continuously monitored for periods of 126 and 34 days, respectively. The data yielded temporally resolved, high-quality measurements of the radiative, soil, and total atmospheric turbulent heat fluxes. Comparative data for the two sites reveal the effects of terrain setting and surface cover in modulating the heat balance. A procedure is suggested for accommodating local advective affects due to variable terrain and surface cover to allow partitioning of the total turbulent flux into values for sensible and latent heat. This procedure relies on a stability-dependent coefficient of turbulent transfer which is locally calibrated to systematically minimize advection-related errors. Scaling functions for the transfer coeffient are based on the effective blackbody temperature of the surface. Consequently, the procedure offers an opportunity for developing reliable bulk representations of heat transfer at the surface for use with remote sensing data and with models of the soil and surface cover in complex terrain.

Sheaffer, John D.↗
NASA NTRS1986

Preliminary assessment of soil moisture over vegetation

Modeling of surface energy fluxes was combined with in-situ measurement of surface parameters, specifically the surface sensible heat flux and the substrate soil moisture. A vegetation component was incorporated in the atmospheric/substrate model and subsequently showed that fluxes over vegetation can be very much different than those over bare soil for a given surface-air temperature difference. The temperature signatures measured by a satellite or airborne radiometer should be interpreted in conjunction with surface measurements of modeled parameters. Paradoxically, analyses of the large-scale distribution of soil moisture availability shows that there is a very high correlation between antecedent precipitation and inferred surface moisture availability, even when no specific vegetation parameterization is used in the boundary layer model. Preparatory work was begun in streamlining the present boundary layer model, developing better algorithms for relating surface temperatures to substrate moisture, preparing for participation in the French HAPEX experiment, and analyzing aircraft microwave and radiometric surface temperature data for the 1983 French Beauce experiments.

Carlson, T. N.↗
NASA NTRS1992

An airborne study of boundary layer heat and moisture fluxes for project FIFE

A summary of work accomplished during the first International Satellite Cloud Climatology Project (ISLSCP) Field Experiment is presented. The Wyoming King Air participated in Intensive Field Campaigns (IFCs) 3 and 4 in 1987, which were committed to a combination of airborne sensible and latent heat flux measurements and soil moisture mappings, with the University of Kansas' X-band side-looking airborne radar (SLAR). A total of 9 flux missions were flown in 1987 using several different flight designs. A critical decision in the first round of aircraft flux analyses, agreed to by all the flux aircraft investigators, was to pass the aircraft data through a high-pass filter prior to the eddy-correlation flux calculations. Several conclusions were drawn from this study: (1) boundary layer (BL) profiles of heat fluxes were usually linear; (2) high-pass filtering applied to the aircraft data did not add to the disagreement between the profile; (3) undersampling at high frequencies could have accounted for as much as a 15 percent underestimate of surface fluxes; (4) disagreement between the aircraft and surface latent heat fluxes changed signs between summer and fall; (5) magnitude and sign of disagreement between aircraft and surface heat fluxes varied systematically with BL depth or height of aircraft profile; and (6) Bowen ratios from both detrended and filtered aircraft data agreed with surface values better for moist, summer cases than for dry cases.

Kelly, Robert D.↗
NASA NTRS2009

A Model of Thermal Conductivity for Planetary Soils: Theory for Cemented Soils - 2

A numerical model of heat conduction through particulate media made of spherical grains cemented by various bonding agents is presented. The pore-filling gas conductivity, volume fraction, and thermal conductivity of the cementing phase are tunable parameters. Cement fractions <0.001-0.01% in volume have small effects on the soil bulk thermal conductivity. A significant conductivity increase (factor 3-8) is observed for bond fractions of 0.01 to 1% in volume. In the 1 to 15% bond fraction domain, the conductivity increases continuously but less intensely (25-100% conductivity increase compared to a 1% bond system). Beyond 15% of cements, the conductivity increases vigorously and the bulk conductivity rapidly approaches that of bedrock. The composition of the cements (i.e. conductivity) has little influence on the bulk thermal inertia of the soil, especially if the volume of bond <10%. These results indicate that temperature measurements are sufficient to detect cemented soils and quantify the amount of cementing phase, but the mineralogical nature of the bonds and the typical grain size are unlikely to be determined from orbit. On Mars, a widespread surface unit characterized by a medium albedo (0.19-0.26) and medium/high thermal inertia (200-600 J s(0.5)/sq m/K) has long been hypothesized to be associated with a duricrust. The fraction of cement required to fit the thermal data is less than approx.1-5% by volume. This small amount of material is consistent with orbital observations, confirming that soil cementation is an important factor controlling the thermal inertia of the Martian surface

Piqueux, S.↗