Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The solar radiation pressure on the Mariner 9 Mars orbiter

The refined mathematical model of the force created by the light pressure of the Sun was used to compute the solar radiation pressure force acting on the Mariner 9 (Mariner Mars 1971) spacecraft, taking into account the reflectivity characteristics of all its components. The results were compared with values obtained from Mariner 9 observations during the cruise phase and found to be in agreement within 0.1% of the values.

Georgevic, R. M.↗

Variation of sodium on Mercury with solar radiation pressure

It has been suggested that nonthermal Na atoms with velocities in excess of 2.1 km/sec in the Mercury atmosphere can be accelerated off the planet by solar radiation pressure; Na abundance may accordingly be expected to decrease with increasing radiation pressure. While this is confirmed by the present measurements, high resolution line profile measurements on Na emission indicate that very little, if any, of the Na is nonthermal, while the bulk is at a temperature approaching that of the planetary surface. Attention is given to explanations for the observed variation.

Potter, A. E.↗

The solar radiation pressure on the Mariner 9 Mars orbiter.

The refined mathematical model of the force created by the light pressure of the sun has been used to compute the solar radiation pressure force acting on the Mariner 9 (Mariner Mars 1971) spacecraft, taking into account the reflectivity characteristics of all its components. The results have been compared with values obtained from Mariner 9 observations during the cruise phase and are found to be in agreement within 0.1% of the values.

Georgevic, R. M.↗

The solar radiation pressure on the Mariner 9 Mars orbiter

The refined mathematical model of the force created by the light pressure of the sun has been used to compute the solar radiation pressure force acting on the Mariner 9 (Mariner Mars 1971) spacecraft, taking into account the reflectivity characteristics of all its components. The results have been compared with values obtained from Mariner 9 observations during the cruise phase and are found to be in agreement within 0.1% of the values.

Georgevic, R. M.↗

Remote sensing of solar radiation absorbed and reflected by vegetated land surfaces

1D and 3D radiative-transfer models have been used to investigate the problem of remotely sensed determination of vegetated land surface-absorbed and reflected solar radiation. Calculations were conducted for various illumination conditions to determine surface albedo, soil- and canopy-absorbed photosynthetically active and nonactive radiation, and normalized difference vegetation index. Simple predictive models are developed on the basis of the relationships among these parameters.

Myneni, Ranga B.↗

Influence of penetrating solar radiation on the heat budget of the equatorial Pacific Ocean

Recent satellite observations of ocean transparency, coupled with climatological surface heat fluxes and ocean density profiles, are used here to show that solar radiation in visible frequencies, usually assumed to be absorbed at the sea surface, in fact penetrates to a significant degree to below the upper mixed layer of the ocean which interacts actively with the atmosphere. The net effect is a reduction of the heat input into the upper layer; for a 20 m-thick mixed layer this is equivalent to an annual reduction in temperature of about 5-10 K. The results provide a natural explanation for the discrepancy between the SSTs predicted by models and those observed.

Lewis, Marlon R.↗

Spectral absorption of solar radiation in cloudy atmospheres A 20/cm model

A radiative transfer model based on both LOWTRAN transmission functions (at a 20/cm resolution), and Monte Carlo simulations of wavelength distributions, is used to determine the spectral absorption of solar radiation in typical water clouds. This yields the relative absorption by the vapor and droplets within each cloud. The results obtained indicate a slightly lower absorption than had previously been found, with boundary layer clouds typically absorbing 9 percent of the terrestrial insolation for an overhead sun. This absorption is strongly dependent on the presence of water vapor above the cloud top and solar zenith angle. Droplets, rather than vapor, are shown to be the dominant absorbers within the cloud except in the absence of water vapor above the cloud top.

Davies, R.↗

Solar Radiation Pressure Effects on the Orbital Motion at SEL2 for the James Webb Space Telescope

Due to James Webb Space Telescope’s large sunshield, which will always be facing the Sun to protect the observatory’s instruments, Solar Radiation Pressure (SRP) has an important effect on its orbital motion around SEL2. Moreover, SRP is highly dependent on the observatory’s attitude with respect to the Sun observatory line. This paper explores the impact of SRP for different attitude profiles on the size of a reference orbit.

Libration Point Orbit↗

Polarization Calibration Using Solar Radiation Background Signal Scattered from Dense Cirrus Clouds in the Visible and Ultraviolet Wavelength Regimes

In this presentation we describe the application of a previously developed technique that is now being used to correct the daytime polarization calibration of the CALIPSO lidar. The technique leverages the fact that the solar radiation background signals from dense cirrus clouds are largely unpolarized due to the internal multiple reflections within the non-spherical ice particles and the multiple scattering that occurs among these particles. Therefore, the ratio of polarization components of the cirrus background signals provides a good estimate for the polarization gain ratio (PGR) of the lidar. Using airborne backscatter lidar measurements, this technique was demonstrated to work well in the infrared regime. However, in the visible and ultraviolet regime, the molecular contribution is too large to be ignored, and thus corrections must be applied to account for the highly polarizing characteristics of the molecular scattering. Ignoring molecular scattering contributions can cause PGR errors of 2-3% at 532 nm, where the CALIPSO lidar makes its depolarization measurement. Because of the wavelength dependence of -4 of the molecular scattering, the PGR error can be even larger at the 355 nm wavelength that will be used by ESA’s EarthCARE lidar. To correct the molecular scattering contributions to the lidar received solar background signal, a look-up table has been created using a polarization-sensitive radiative transfer model. This presentation describes the theory and implementation of the molecular scattering correction.

Zhaoyan Liu↗

Spectral distribution of solar radiation

Available quantitative data on solar total and spectral irradiance are examined in the context of utilization of solar irradiance for terrestrial applications of solar energy. The extraterrestrial solar total and spectral irradiance values are also reviewed. Computed values of solar spectral irradiance at ground level for different air mass values and various levels of atmospheric pollution or turbidity are presented. Wavelengths are given for computation of solar, absorptance, transmittance and reflectance by the 100 selected-ordinate method and by the 50 selected-ordinate method for air mass 1.5 and 2 solar spectral irradiance for the four levels of atmospheric pollution.

Mecherikunnel, A. T.↗

An efficient method for computing the absorption of solar radiation by water vapor

Chou and Arking (1980) have developed a fast but accurate method for computing the IR cooling rate due to water vapor. Using a similar approach, the considered investigation develops a method for computing the heating rates due to the absorption of solar radiation by water vapor in the wavelength range from 4 to 8.3 micrometers. The validity of the method is verified by comparison with line-by-line calculations. An outline is provided of an efficient method for transmittance and flux computations based upon actual line parameters. High speed is achieved by employing a one-parameter scaling approximation to convert an inhomogeneous path into an equivalent homogeneous path at suitably chosen reference conditions.

Chou, M.-D.↗

Effects of simulated solar radiation on the transmission of magnesium fluoride and cryolite thin films

Thin films of cryolite magnesium fluoride on fused silica substrates were exposed to 1126 equivalent sun-hours of radiation. The optical transmissions of the samples were measured before and after irradiation. The results indicate that, after the degradation of the silica substrate is accounted for, the cryolite is severely affected by the simulated solar radiation, but the magnesium fluoride is only slightly affected.

Heslin, T.↗

Orbit Stability of OSIRIS-REx in the Vicinity of Bennu Using a High-Fidelity Solar Radiation Model

The OSIRIS-REx mission (Origins Spectral Interpretation Resource Identification Security Regolith EXPlorer) is an asteroid sample return mission to Bennu (RQ36) that is scheduled to launch in 2016. The planned science operations precluding the small retrieval involve operations in terminator orbits (orbit plane is perpendicular to the sun). Over longer durations the solar radiation pressure (SRP) perturbs the orbit causing it to precess. Our work involves: modeling high fidelity SRP model to capture the perturbations during attitude changes; design a stable orbit from the high fidelity models to analyze the stability over time.

Williams, Trevor↗

Solar radiation at the Earth's surface: Its calculation and inference from satellite imagery

Physical and empirical models for calculation of insolation on a horizontal surface are described. Calculation of the spectral components of insolation and the calculation of the integrated values using wavelength-averaged values, ignoring aerosol effects, are discussed. Empirical models for determining insolation from meteorological data under clear and cloudy skies are described. The influence of hourly and daily global solar radiation from GOES satellite images is illustrated. Data acquisition methods for the Great Plains experiment, the determination of cloud free brightness levels, and determination of cloud parameters and target brightness are considered. The use of two and seven satellite images per day resulted in insolation determinations having a standard error of less then 10% of the mean. Use of only one image per day resulted in a standard error of about 20% of the mean.

Bartman, F. L.↗

Mercury Conditions for the MESSENGER Mission Simulated in High- Solar-Radiation Vacuum Tests

The MESSENGER (Mercury Surface, Space Environment, Geochemistry, and Ranging) spacecraft, planned for launch in March 2004, will perform two flybys of Mercury before entering a year-long orbit of the planet in September 2009. The mission will provide opportunities for detailed characterization of the surface, interior, atmosphere, and magnetosphere of the closest planet to the Sun. The NASA Glenn Research Center and the MESSENGER spacecraft integrator, the Johns Hopkins University Applied Physics Laboratory, have partnered under a Space Act Agreement to characterize a variety of critical components and materials under simulated conditions expected near Mercury. Glenn's Vacuum Facility 6, which is equipped with a solar simulator, can simulate the vacuum and high solar radiation anticipated in Mercury orbit. The MESSENGER test hardware includes a variety of materials and components that are being characterized during the Tank 6 vacuum tests, where the hardware will be exposed to up to 11 suns insolation, simulating conditions expected in Mercury orbit. In 2002, ten solar vacuum tests were conducted, including beginning of life, end of life, backside exposure, and solar panel thermal shock cycling tests. Components tested include candidate solar array panels, sensors, thermal shielding materials, and communication devices. As an example, for the solar panel thermal shock cycling test, two candidate solar array panels were suspended on a lift mechanism that lowered the panels into a liquid-nitrogen-cooled box. After reaching -140 C, the panels were then lifted out of the box and exposed to the equivalent of 6 suns (8.1 kilowatts per square meters). After five cold soak/heating cycles were completed successfully, there was no apparent degradation in panel performance. An anticipated 100-hr thermal shield life test is planned for autumn, followed by solar panel flight qualification tests in winter. Glenn's ongoing support to the MESSENGER program has been instrumental in identifying design solutions and validating thermal performance models under a very aggressive development schedule. The test data have assisted Johns Hopkins engineers in selecting a flight solar array vendor and a thermal shield design. MESSENGER is one in a series of missions in NASA's Discovery Program. Infrared thermography provides data on the thermal gradients in the MESSENGER components during high solar insolation vacuum testing.

Wong, Wayne A.↗

Clear-Sky Surface Solar Radiation During South China Sea Monsoon Experiment

Downward solar fluxes measured at Dungsha coral island (20 deg. 42 min. N, 116 deg. 43 min. E) during the South China Sea Monsoon Experiment (May-June 1998) have been calibrated and compared with radiative transfer calculations for three clear-sky days. Model calculations use water vapor and temperature profiles from radiosound measurements and the aerosol optical thickness derived from sunphotometric radiance measurements at the surface. Results show that the difference between observed and model-calculated downward fluxes is less than 3% of the daily mean. Averaged over the three clear days, the difference reduces to 1%. The downward surface solar flux averaged over the three days is 314 W per square meters from observations and 317 W per square meters from model calculations, This result is consistent with a previous study using TOGA CAORE measurements, which found good agreements between observations and model calculations. This study provides an extra piece of useful information on the modeling of radiative transfer, which fills in the puzzle of the absorption of solar radiation in the atmosphere.

Lin, Po-Hsiung↗

Spectral estimates of intercepted solar radiation by corn and soybean canopies

Attention is given to the development of methods for combining spectral and meteorological data in crop yield models which are capable of providing accurate estimates of crop condition and yields throughout the growing season. The present investigation is concerned with initial tests of these concepts using spectral and agronomic data acquired in controlled experiments. The data were acquired at the Purdue University Agronomy Farm, 10 km northwest of West Lafayette, Indiana. Data were obtained throughout several growing seasons for corn and soybeans. Five methods or models for predicting yields were examined. On the basis of the obtained results, it is concluded that estimating intercepted solar radiation using spectral data is a viable approach for merging spectral and meteorological data in crop yield models.

Gallo, K. P.↗