Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solid solution reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Template-free cyclic hexavanadate: Synthesis, characterization, solid-state structure, and solution-state dynamics

A novel hexavanadate–organic hybrid material of the formula [NH 4 ] 2 [V 6 (µ 2 -O) 6 (O) 4 (PDC) 6 ] (PDC = 2,6-pyridinedicarboxylate) has been prepared in dilute nitric acid under hydrothermal reaction conditions. The product was characterized by single crystal and powder X-ray diffraction, FTIR, UV–Vis, Raman, and thermogravimetric analyses in the solid state, and small angle X-ray scattering, ESI-MS, NMR ( 1 H, 13 C, 51 V), and Raman spectroscopic techniques in aqueous solution. The crystal structure revealed a rare structure type in vanadium chemistry which crystallizes in the monoclinic space group P2 1/n and consists of a cyclic polyoxovanadate core with edge-capped tetrahedral and octahedral vanadium centers. The “hollow” polyoxovanadate is stabilized by a PDC ligand on each metal center, and ammonium ions charge balance the anionic core and form hydrogen bonding interactions with the hexavanadate units. Solution-state studies showed that the structural unit observed in the solid state hydrolyzes upon dissolution in water, resulting in a symmetric dimer bearing similar ligand sets. Finally, catalytic experiments on the photodecomposition of crystal violet, rhodamine B, methylene blue, and rhodamine 6G showed ≥93% degradation of the dyes under UV light irradiation upon addition of the vanadium complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Magnesite Formation at Low-Temperature and High pCO2 in Aqueous Solution

Like many metal carbonate minerals, despite conditions of supersaturation, precipitation of magnesite from aqueous solution is kinetically hindered at low temperatures, for reasons that remain poorly understood. The present study examines precipitation products from reaction of Mg(OH)2 in aqueous solutions saturated with supercritical CO2 at high pressures (90 atm and 110 atm) and low temperatures (35 °C and 50 °C). Traditional bulk characterization (X-ray diffraction) of the initial solid formed indicated the presence of hydrated magnesium carbonates (hydromagnesite and nesquehonite), thermodynamically metastable phases that were found to slowly react during ageing to the more stable anhydrous form, magnesite, at temperatures as low as 35 °C (135-140 days) and at a faster rate at 50 °C (56 days). Undetected by bulk measurements, detailed examination of the precipitates by scanning electron microscopy (SEM) showed that magnesite is present as a minor component at relatively early reaction times (7 days) at 50 °C. In addition to magnesite dominating the solid phases over time, we find that mangesite nucleation and growth occurs more quickly with increasing partial pressure of CO2, and in electrolyte solutions with high bicarbonate content. Furthermore, formation of magnesite was found to be enhanced in sulfate-rich solutions, compared to chloride-rich solutions. We speculate that much of this behavior is possibly due to sulfate serving as sink of protons generated during carbonation reactions. These results support the importance of integrating magnesite as an equilibrium phase in reactive transport calculations of the effects of carbon dioxide sequestration on subsurface formations at long time scales.

Qafoku, Odeta↗

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

Lithium-sulfur (Li-S) battery is one of the most promising candidates for the next generation energy storage systems. However, several barriers, including polysulfide shuttle effect, the slow solid-solid surface reaction pathway in the lower discharge plateau, and corrosion of Li anode still limit its practical applications, especially under the lean electrolyte condition required for high energy density applications. Here, we propose a solution-mediated sulfur reduction pathway to improve the capacity and reversibility of the sulfur cathode and suppress dendrite growth on the Li metal anode simultaneously. With this method, a high coulombic efficiency (99%) and stable cycle life over 100 cycles were achieved under application-relevant conditions (S loading: 6.2 mg cm-2; electrolyte to sulfur ratio: 3 mLE gs-1; sulfur weigh ratio: 72 wt%). This result is enabled by a specially designed Li2S4-rich electrolyte, in which Li2S is formed through a chemical disproportionation reaction instead of electrochemical routes. A diglyme solvent was used to obtain electrolytes with the optimum range of Li2S4 concentration. Operando X-ray absorption spectroscopy confirms the solution pathway in a practical Li-S cell. This solution pathway not only introduces a new electrolyte regime for practical Li-S batteries, but also provides a new perspective for bypassing the inefficient surface pathway for other electrochemical processes.

Wang, Hui↗

Solution-Phase Synthesis of Platinum-Decorated Hydrogen Tungsten Bronzes for Hydrogen Atom Transfer from Oxides to Molecules

Hydrogen bronzes can be used as hydrogen donors for the broad class of reactions involving proton-coupled electron transfer (PCET). Here, in this work, we describe a method to prepare platinum-decorated hydrogen tungsten bronzes, Pt@H x WO 3 · n H 2 O with n = 0, 1, and 2, by reacting the pristine oxides at modest temperatures with a mild reducing agent, H 3 PO 2 , and H 2 PtCl 6 in an aqueous solution. We explored the tunability and kinetics of this reaction and compared it with that of archetypal gas–solid hydrogen spillover. We demonstrate that the identity of the noble metal affects the extent of bronze reduction. This suggests that the mechanism proceeds via the adsorption of a hydrogen-atom species on the noble metal. Finally, we explored the ability of the Pt-decorated hydrogen tungsten bronzes to hydrogenate a model H + /e – acceptor, 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO). The bronze phases return to their fully oxidized states along with the subsequent reduction of TEMPO to TEMPOH. Overall, this work demonstrates a solution-phase method to obtain hydrogen bronzes, which can then be used to perform hydrogen transfer reactions, providing a pathway for the use of extended transition metal oxides as stoichiometric reagents for broad classes of hydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contact with Electrically Conductive Inert Solids Alters Intrinsic Heterogeneous Brønsted Acid Catalysis

Interfacial electric fields at heterogeneous catalyst surfaces have been demonstrated to alter kinetics of liquid-phase reactions. In these systems, electric fields are generated from applying a potential to the catalyst through connection to a potentiostat or through electron transfer from redox-active species in solution. Here, we demonstrate that catalyst polarization can also occur by simply contacting electrically conductive inert solids, leading to the counterintuitive conclusion that a catalyst particle touching an inert solid can alter intrinsic reaction rates. Using dehydration of 1-methylcyclopentanol to 1-methylcyclopentene catalyzed by Brønsted-acidic carboxylic acid groups on carbon nanotubes as a proof-of-concept probe reaction, we show that catalyst contact with inert, thermally reduced carbon nanotubes leads to order-of-magnitude changes in reaction rate. Furthermore, we demonstrate that these contact-induced effects can also be observed under standard laboratory reaction conditions, where particle-to-particle contact in stirred catalyst powder suspensions is sufficient to demote rates by ∼8-fold. This work provides the foundation for a new method of reaction rate control, which could have implications whenever heterogeneous catalyst particles are in contact with inert materials for liquid-phase reactions in the presence of electrolyte.

Alcohols↗

Resorption of Ca{sub 3–} {sub x}M{sub 2x}(PO{sub 4}){sub 2} (M = Na, K) Calcium Phosphate Bioceramics in Model Solutions

The resorbability of bioceramics in the Ca{sub 3}(PO{sub 4}){sub 2}–CaNaPO{sub 4}–CaKPO{sub 4} system is evaluated in an approach involving thermodynamic assessment of solubility and investigation of the dissolution kinetics in model media, in particular in citric acid solutions. Thermodynamic calculation indicates high solubility of the Ca{sub 5}Na{sub 2}(PO{sub 4}){sub 4}, α-CaМPO{sub 4}, β-CaKPO{sub 4}, and β-СаK{sub 0.6}Na{sub 0.4}PO{sub 4} phases. Investigation of the dissolution kinetics of ceramics has made it possible to identify two distinct types of behavior of resorbable materials in weakly acidic solutions: with fast resorption kinetics in the case of the phases based on nagelschmidtite solid solutions and α-CaМPO{sub 4} disordered high-temperature solid solutions, and with a nearly constant, relatively low dissolution rate and a high solubility limit in the case of β-СaK{sub 1–} {sub x}Na{sub x}-based phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu{sub 2}Mn{sub 1-x}Co{sub x}SnS{sub 4}: Novel keesterite type solid solutions

A new family of Cu{sub 2}Mn{sub 1-x}Co{sub x}SnS{sub 4} chalcogenides has been synthesized by conventional solid-state reactions at 850 Degree-Sign C. The reactions products were characterized by powder X-ray diffraction (XRD), energy-dispersive X-ray analysis (SEM-EDS), Raman spectroscopy and magnetic susceptibility. The crystal structures of two members of the solid solution series Cu{sub 2}Mn{sub 0.4}Co{sub 0.6}SnS{sub 4} and Cu{sub 2}Mn{sub 0.2}Co{sub 0.8}SnS{sub 4} have been determined by single-crystal X-ray diffraction. Both phases crystallize in the tetragonal keesterite-type structure (space group I4{sup Macron }). The distortions of the tetrahedral volume of Cu{sub 2}Mn{sub 0.4}Co{sub 0.6}SnS{sub 4} and Cu{sub 2}Mn{sub 0.2}Co{sub 0.8}SnS{sub 4} were calculated and compared with the corresponding differences in the Cu{sub 2}MnSnS{sub 4} (stannite-type) end-member. The compounds show nearly the same Raman spectral features. Temperature-dependent magnetization measurements (ZFC/FC) and high-temperature susceptibility indicate that these solid solutions are antiferromagnetic. - Graphical abstract: View along [100] of the Cu{sub 2}Mn{sub 1-x}Co{sub x}SnS{sub 4} structure showing tetrahedral units and magnetic measurement ZFC-FC at 500 Oe. The insert shows the 1/{chi}-versus-temperature plot fitted by a Curie-Weiss law. Highlights: Black-Right-Pointing-Pointer Cu{sub 2}Mn{sub 1-x}Co{sub x}SnS{sub 4} solid solutions belong to the family of compounds adamantine. Black-Right-Pointing-Pointer Resolved single crystals of the solid solutions have space group I4{sup Macron }. Black-Right-Pointing-Pointer The distortion of the tetrahedral volume of Cu{sub 2}Mn{sub 1-x}Co{sub x}SnS{sub 4} were calculated. Black-Right-Pointing-Pointer These solid solutions are antiferromagnetic.

36 MATERIALS SCIENCE↗

On the formation mechanism of solid-solution Cu-to-Cu joints in the Cu/Ni/Ga/Ni/Cu system

Highlights: • The mechanism of Cu/(Ni,Cu,Ga)/Cu solid-solution joint formation is elaborated. • Ga is the dominant diffusion species in the Cu/Ni/Ga/Ni/Cu bonding system. • Loose and columnar Ni{sub 3}Ga{sub 7} layer is formed by the (001)-textured Ni/Ga reactions. • Cu significantly accelerates the growth of Ni{sub 3}Ga{sub 7} layer by enhancing Ga diffusion. • Supersaturated Cu in Ni{sub 2}Ga{sub 3} phase promotes the formation of the final fcc phase. - Abstract: Copper (Cu)-to-Cu interconnection is crucial in electronic packaging for applications ranging from three-dimensional integrated circuits to die-attachment in wide band-gap devices. Solid-solution phases are innate with better ductility and electrical and thermal conductivity over intermetallic compounds, which are brittle, electrical resistant, and unstable; yet are commonly seen in electronic joints. The desired solid-solution Cu-to-Cu joints have recently been demonstrated using transient-liquid-phase bonding with gallium (Ga) as the filler material to bond Cu substrates with electroplated nickel (Ni) as under-bump-metallurgy. The Cu/Ni/Ga/Ni/Cu couples can fully transform into the Cu/face-centered cubic (fcc)-(Ni,Cu,Ga)/Cu solid-solution joints. However, why and how the solid-solution joints were formed remains unclear. Here we proposed the formation mechanism of the fcc-(Ni,Cu,Ga) solid-solution joints based on five sets of Cu-Ni-Ga couples, namely the Ni/Ga, Ni/Cu/Ga, Ni/Ni/Ga, (Cu,Ni)/Ga, and Cu/Ni/Ni{sub 3}Ga{sub 7}/Ni{sub 3}Ga{sub 7}/Ni/Cu reactions. The roles of each element in the Cu-Ga-Ni interactions as well as the reaction progressions are elaborated.

36 MATERIALS SCIENCE↗

Chloride substitution in sodium borohydride

The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH{sub 4}, forming Na(BH{sub 4}){sub 0.9}Cl{sub 0.1}, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH{sub 4} is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH{sub 4}){sub 0.43}Cl{sub 0.57}. In addition, annealing results in dissolution of 10-20 mol% NaBH{sub 4} into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements. - Graphical Abstract: Dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. Dissolution is facilitated by two methods: ball milling or annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples. Sample compositions and dissolution mechanism are studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction data. Highlights: > Studies of dissolution of sodium chloride and sodium borohydride into each other. > Solid state diffusion facilitated by mechanical and thermal treatments. > Dissolution is more efficiently induced by heating than by mechanical treatment. > Mechanism for dissolution studied by Rietveld refinement of in situ SR-PXD data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and anion exchange properties of a Zn/Ni double hydroxide salt with a guarinoite structure

In this study, the first route to synthesize a compound with the guarinoite structure (Zn,Co,Ni){sub 6}(SO{sub 4})(OH,Cl){sub 10}.5H{sub 2}O is reported. Zn/Ni guarinoite is obtained from the reaction of NiSO{sub 4}.7H{sub 2}O with solid ZnO in aqueous solution. The resulting green Zn/Ni guarinoite ((Zn{sub 3.52}Ni{sub 1.63})(SO{sub 4}){sub 1.33}(OH{sub 7.64}).4.67H{sub 2}O) was characterized by X-ray diffraction, infrared spectrometry, UV-Visible spectrometry and thermal analysis. It is shown that its structure is similar to the one described for the layered Zn sulfate hydroxide hydrate, i.e. brucite layers with 1/4 empty octahedra presenting tetrahedrally coordinated divalent atoms above and below the empty octahedra. Ni atoms are located in the octahedra and zinc atoms in tetrahedra and octahedra. In this structure the exchangeable anions are located at the apex of tetrahedra. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that the Zn/Ni guarinoite is composed of aggregates of hexagonal plates of several hundreds of nanometers. Due to its interest for industrial or environmental applications, the exchange of sulfate groups by carbonates has been investigated. Results show a limited exchange and a higher affinity of the Zn/Ni guarinoite for sulfates compared to carbonates. - Graphical abstract: SEM micrograph (secondary electrons) of the synthesized Zn/Ni guarinoite showing that aggregates are composed of small plate-like particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary metal fluorides as high-energy cathodes with low cycling hysteresis

In this study, transition metal fluorides are an appealing alternative to conventional intercalation compounds for use as cathodes in next-generation lithium batteries due to their extremely high capacity (3–4 times greater than the current state-of-the-art). However, issues related to reversibility, energy efficiency and kinetics prevent their practical application. Here we report on the synthesis, structural and electrochemical properties of ternary metal fluorides (M 1 y M 2 1-y F x : M 1 , M 2 = Fe, Cu), which may overcome these issues. By substituting Cu into the Fe lattice, forming the solid–solution Cu y Fe 1-y F 2 , reversible Cu and Fe redox reactions are achieved with surprisingly small hysteresis (<150 mV). This finding indicates that cation substitution may provide a new avenue for tailoring key electrochemical properties of conversion electrodes. In conclusion, although the reversible capacity of Cu conversion fades rapidly, likely due to Cu + dissolution, the low hysteresis and high energy suggest that a Cu-based fluoride cathode remains an intriguing candidate for rechargeable lithium batteries.

36 MATERIALS SCIENCE↗

Selective formation of metastable polymorphs in solid-state synthesis

Metastable polymorphs often result from the interplay between thermodynamics and kinetics. Despite advances in predictive synthesis for solution-based techniques, there remains a lack of methods to design solid-state reactions targeting metastable materials. Here, we introduce a theoretical framework to predict and control polymorph selectivity in solid-state reactions. This framework presents reaction energy as a rarely used handle for polymorph selection, which influences the role of surface energy in promoting the nucleation of metastable phases. Through in situ characterization and density functional theory calculations on two distinct synthesis pathways targeting LiTiOPO 4 , we demonstrate how precursor selection and its effect on reaction energy can effectively be used to control which polymorph is obtained from solid-state synthesis. A general approach is outlined to quantify the conditions under which metastable polymorphs are experimentally accessible. With comparison to historical data, this approach suggests that using appropriate precursors could enable targeted materials synthesis across diverse chemistries through selective polymorph nucleation.

36 MATERIALS SCIENCE↗

Flow-through biological conversion of lignocellulosic biomass

The present invention is directed to a process for biologically converting carbohydrates from lignocellulosic biomass comprising the steps of: suspending lignocellulosic biomass in a flow-through reactor, passing a reaction solution into the reactor, wherein the solution is absorbed into the biomass substrate and at least a portion of the solution migrates through said biomass substrate to a liquid reservoir, recirculating the reaction solution in the liquid reservoir at least once to be absorbed into and migrate through the biomass substrate again. The biological converting of the may involve hydrolyzing cellulose, hemicellulose, or a combination thereof to form oligosaccharides, monomelic sugars, or a combination thereof; fermenting oligosaccharides, monomelic sugars, or a combination thereof to produce ethanol, or a combination thereof. The process can further comprise removing the reaction solution and processing the solution to separate the ethanol produced from non-fermented solids.

09 BIOMASS FUELS↗

Flow-through biological conversion of lignocellulosic biomass

The present invention is directed to a process for biologically converting carbohydrates from lignocellulosic biomass comprising the steps of: suspending lignocellulosic biomass in a flow-through reactor, passing a reaction solution into the reactor, wherein the solution is absorbed into the biomass substrate and at least a portion of the solution migrates through said biomass substrate to a liquid reservoir, recirculating the reaction solution in the liquid reservoir at least once to be absorbed into and migrate through the biomass substrate again. The biological converting of the may involve hydrolyzing cellulose, hemicellulose, or a combination thereof to form oligosaccharides, monomelic sugars, or a combination thereof; fermenting oligosaccharides, monomelic sugars, or a combination thereof to produce ethanol, or a combination thereof. The process can further comprise removing the reaction solution and processing the solution to separate the ethanol produced from non-fermented solids.

09 BIOMASS FUELS↗

Synthesis and characterisation of In-doped MnWO{sub 4}-type solid-solutions: Mn{sub 1−3x}In{sub 2x}□{sub x}WO{sub 4} (x=0–0.11)

Substitution of In{sup 3+} for Mn{sup 2+} in MnWO{sub 4}, which is one of the most studied multiferroics, was conducted systematically by solid-state reactions at 1050 °C to obtain a series of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} solid solutions (x=0–0.11; the box indicates vacancy). The successful In-doping could be proven by electron microprobe, and statically disordered structures of this solid solution series were elucidated by Rietveld analyses with X-Ray powder diffraction (XPD) data. Its average structure maintains the space group P2/c at least up to the replacement of 33 at% Mn. The tendency of their unit cells proportionally enlarging with In-doping is an unexpected observation because In{sup 3+} is smaller than Mn{sup 2+}. This could not be explained alone by average atomic bonding distances and angles evaluated from XPD data analyses. Complimentarily, micro-Raman spectra of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} materials feature a hardening of Raman modes due to stronger atomic bonds in W{sub 2}O{sub 4} and WO{sub 2} units with increasing In-doping. This is considered as an inevitable consequence of broken bonding in directly neighbouring Mn–O bonds as the presence of In{sup 3+} in MnWO{sub 4} accompanies the creation of defects at Mn sites. The current study using XRD and micro-Raman suggests the enlarging local space around the bridging oxygen as the reason for the unexpected cell expansion when smaller In{sup 3+} along with defects replace Mn{sup 2+} in MnWO{sub 4}. - Graphical abstract: Despite of substitution of smaller In{sup 3+} for larger Mn{sup 2+}, the In-rich solid solution Mn{sub 0.71(2)}In{sub 0.19(1)}□{sub 0.10}WO{sub 4} undergoes a volume expansion of 0.4% with respect to MnWO{sub 4}. This could be explained by a local space expansion of 0.13% around bridging oxygen at O2 sites, as illustrated by dashed lines for clarity. - Highlights: • Investigation of Mn{sub (1−3x)}In{sub 2x}□{sub x}WO{sub 4} solid solutions (x=0–0.11). • An unexpected lattice expansion by In-doping. • Strong change in local environment around bridging oxygens. • Enhancement of atomic bonds in W{sub 2}O{sub 4} and WO{sub 2} units with increasing In-doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of TcO 4 – from Representative Nuclear Waste Streams with Layered Potassium Metal Sulfide Materials

Many efforts have focused on the sequestration and immobilization of 99Tc because the radionuclide is highly mobile in oxidizing environments and presents serious health risks due to its radiotoxicity and long half-life (t1/2 = 213 000 a). One of the more common methods for Tc removal from solution and immobilization in solids is based on reducing Tc from highly soluble Tc(VII) to sparingly soluble Tc(IV). In order to remove solution Tc through this reduction process, the Tc-sequestering solid must contain a reducing agent and, ideally, the Tc-sequestering material would function in a large range of chemical environments. For long-term stability, the reduced Tc would preferentially be incorporated into the resulting mineral structure instead of simply being sorbed onto the mineral surface. Here, we report results obtained from batch sorption experiments performed in anoxic and oxic conditions with two sulfide-containing potassium metal sulfide (KMS) materials, known as KMS-2 and KMS-2-SS. In deionized water in anoxic conditions after 15 d of contact, KMS-2 is capable of removing ~45% of Tc and KMS-2-SS is capable of removing ~90% of Tc. The improved performance of KMS-2-SS compared to KMS-2 in deionized water in anoxic conditions appears to be linked both to a higher pH resulting from the batch sorption experiments performed with KMS-2-SS and a higher overall purity of KMS-2-SS. Both materials perform even better in highly caustic (pH~13.5), high ionic strength (8.0 M) simulated Hanford low-activity waste solutions, removing more than 90% Tc after 15 d of contact in anoxic conditions. Post-reaction solids analysis indicate that Tc(VII) is reduced to Tc(IV) and that Tc(IV) is bonded to S atoms in the resulting KMS-2 structure in a Tc2S7 form. In contrast to previous ion exchange experiments with other KMS materials, the batch sorption experiments examining Tc removal cause the initially crystalline KMS materials to lose much of their initial long-range order.

Environmental Molecular Sciences Laboratory↗

Formation and Scrolling Behavior of Metal Fluoride and Oxyfluoride Nanosheets

Here we report 1–2 unit-cell-thick CaF 2 nanosheets, which can be converted topochemically into LaF 3–2 x O x nanosheets that scroll spontaneously. The formation of CaF 2 nanosheets is achieved through interlayer confinement and templating within CaSi 2 during reaction with aqueous HF. The structure and morphology of these nanosheets are characterized by HRTEM, AFM, and powder XRD. Solid-state MAS and solution 19 F NMR spectroscopies provide further information about interstitial fluoride sites within CaF 2 nanosheets as well as help identify side products of the CaSi 2 + HF reaction. CaF 2 nanosheets react with lanthanide salts at room temperature to yield nanostructured hexagonal LnF 3 (Ln = Ce, Pr, Nd, Sm, Eu), orthorhombic LnF 3 (Ln = Gd, Dy, Ho, Er, Yb), and cubic YbF 3– x products. Furthermore, the reaction of CaF 2 nanosheets with lanthanum salts is unique in producing LaF 3–2 x O x . The evidence for this composition includes powder XRD, EDS, XPS, and 19 F NMR data. The structure of LaF 3–2 x O x differs from hexagonal LaF 3 only in the replacement of two fluorides by one oxygen. While this topochemical transformation preserves the two-dimensional morphology it also causes lattice strain that initiates scrolling. The resulting product consists of remarkable ~20 × 5 nm scroll-like tubes of LaF 3–2 x O x that are unique among metal fluoride materials. These results demonstrate novel metal fluoride nanochemistry and a new scrolling mechanism.

36 MATERIALS SCIENCE↗