SEARCH · Search NASA

Results for “Solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1987

The use of molten salts as physical models for the study of solidification in metals and semiconductors

It is presently noted that molten salts possess attributes rendering them attractive as physical models of cast metals in solidification studies. Molten alkali halides have an approximately correct Prandtl number for this modeling of metallic melts, and are transparent to visible light. Attention is given to solidification in the LiCl-KCl system, in order to determine whether such phenomena as solute rejection can be observed and characterized through the application of laser schlieren imaging.

Koziol, Jurek K.↗

NASA NTRS1987

Double-diffusive effects during solidification

When a fluid contains two diffusing components with different molecular diffusivities, such as heat and solute concentration, convective motion may be generated when potential energy is released owing to differential diffusion. In the solidification of binary alloys and doped semiconductors, temperature and concentration gradients do exist simultaneously. If these gradients are aligned in a suitable manner, convection may ensue. In the case of the binary alloy, such convection may extend through the mushy zone and may be the cause of macrosegregations. In the case of doped semiconductors, the convective motion may cause the nonuniform distribution of dopant in the product. In this paper, the fundamentals of double-diffusive convection will be reviewed, and its effect on solidification will be discussed.

Chen, C. F.↗

NASA NTRS1988

Solutal convection during directional solidification

During directional solidification of a binary alloy at constant velocity, buoyancy-driven fluid flow may occur due to the solute gradients generated by the solidification process. Numerical calculations of the solute and fluid flow fields in the melt have been carried out using finite differences in a two-dimensional, time-dependent model that assumes a planar crystal-melt interface and allows time-dependent gravitational accelerations. The container walls are rigid and perfectly insulating for solute. For constant vertical gravitational accelerations, as the solutal Rayleigh number is varied, multiple steady states and time-dependent states may occur. The bifurcation from the quiescent state may be subcritical or transcritical, depending on the aspect ratio of the container. Calculations have also been performed for a gravitational acceleration that is assumed to be uniform in magnitude with its direction rotating uniformly. Numerical results have been obtained for a Schmidt number of 10 and a gravitational acceleration of 0.0001 G. The maximum variation in the solute concentration at the crystal-melt interface is calculated for various values of the rotation rate of the gravitational acceleration.

Mcfadden, G. B.↗

NASA NTRS1989

Effect Of Solidification Speed On Fatigue Properties

Fast solidification increases fatigue life, but failure distribution becomes less predictable. Report describes effects of rate of solidification on nickel-based super-alloy MAR-M246(Hf) used in turbine blades. Based on experiments in which specimens directionally solidified at 5 cm/h and 30 cm/h, then tested for high cycle fatigue. Specimens also inspected by energy-dispersive x-ray (EDX) analysis and optical and electron microscopy.

Mccay, M. H.↗

NASA NTRS1986

Probes and monitors for the study of solidification of molten semiconductors

The purpose is to examine solidification in the LiCl-KCl system to determine if phenomena such as solute rejection can be obseved by laser schlieren imaging. Molten salts have attributes that make them attractive as physical models in solidification studies. With optical techniques of investigation such as schlieren imaging, it is possible to study fluid flow phenomena in molten salts and to watch the trajectory of the solid-liquid interface.

Sadoway, D. R.↗

NASA NTRS1988

Rapid solidification research at the NASA Lewis Research Center

This paper describes the research program initiated at the NASA Lewis Research Center for the study of rapid solidification of high temperature materials, with the major purpose for the development of advanced high-temperature and heat-flux materials for aircraft and aerosphace applications. Particular attention is given to the development of three alloys: Ni-aluminides, Nb-alloys, and Cu-alloys. Rapid solidification processing yielded alloys with novel microstructures, very fine grain sizes, reduced chemical segregation, and metastable extended solid solutions.

Locci, Ivan E.↗

NASA NTRS1988

Directional solidification with heat losses

The upward directional solidification of a dilute binary alloy in a tall, thin, two-dimensional slot is considered. Heat losses from the sidewalls produce curved isotherms, interface deformations, and melt convection. An asymptotic approach is used which relates the small heat loss to the thinness of the solidification cell, and solutions are obtained for the resulting melt convection, interface deflection, and the distribution of heat and solute. The model is compared to the numerical results of Chang and Brown (1983) which exclude the effects of solute buoyancy and thermodynamic equilibrium at the interface. The radial segregation at the interface (consistent with both interface shapes and temperature fields) is computed, and it is found that the radial segregation is independent of interfacial shapes; the radial segregation cannot be calculated from only a knowledge of the interface shape.

Brattkus, K.↗

NASA NTRS1989

Thermosolutal convection during dendritic solidification

This paper presents a mathematical model for directional solidification of a binary alloy including a dendritic region underlying an all-liquid region. It is assumed initially that there exists a nonconvecting state with planar isotherms and isoconcentrates solidifying at a constant velocity. The stability of this system has been analyzed and nonlinear calculations are performed that show the effect of convection in the solidification process when the system is unstable. Results of calculations for various cases defined by the initial temperature gradient at the dendrite tips and varying strength of the gravitational field are presented for systems involving lead-tin alloys. The results show that the systems are stable for a gravitational constant of 0.0001 g(0) and that convection can be suppressed by appropriate choice of the container's size for higher values of the gravitational constant. It is also concluded that for the lead-tin systems considered, convection in the mushy zone is not significant below the upper 20 percent of the dendritic zone, if al all.

Heinrich, J. C.↗

NASA NTRS1989

Morphological instabilities in directional solidification of a binary alloy - End effects

This paper considers the unidirectional solidification of a binary alloy for which the liquid and solid phases are bounded by endwalls. In order to account for the transport of latent heat and solute, thermal and solutal boundary layers must be placed at the solidifying interface. Further, under the assumption of fixed temperature gradients, the presence of the endwalls leads to a velocity of solidification that decreases with time, and hence to an unsteady basic state having a planar interface. From a stability analysis of this state, a nonlinear long-wave evolution equation of Sivashinsky type is derived, with modified coefficients, that shows how the onset of cellular structure is delayed by the presence of endwalls.

Young, Gerald W.↗

NASA NTRS1989

Melting and solidification of acoustically levitated drops

A single axis acoustic levitator has been used to suspend a drop of commercial grade succinonitrile in air. The drop is subjected to thermal cycling in order to observe melting and solidification of the drop in the acoustically levitated state. Melting takes place over a temperature rise of a few degrees, which is typical for an impure material. Solidification initially progresses along the drop surface because of the temperature gradient developed in the drop. The resultant solid drop shows a dendritic surface feature with a cavity in some circumstances. An attempt is made to calculate the growth velocity of the dendrites.

Ohsaka, K.↗

NASA NTRS1990

Modelling directional solidification

The long range goal is to develop an improved understanding of phenomena of importance to directional solidification, to enable explanation and prediction of differences in behavior between solidification on Earth and in space. Emphasis during the period of this grant was on experimentally determining the influence of convection and freezing rate fluctuations on compositional homogeneity and crystalline perfection in the vertical Bridgman-Stockbarger technique. Heater temperature profiles, buoyancy-driven convection, and doping inhomogeneties were correlated using naphthalene doped with azulene. In addition the influence of spin-up/spin-down on compositional homogeneity and microstructure of indium gallium antimonide and the effect of imposed melting-freezing cycles on indium gallium antimonide are discussed.

Wilcox, William R.↗

NASA NTRS1989

Solute redistribution in dendritic solidification with diffusion in the solid

An investigation of solute redistribution during dendritic solidification with diffusion in the solid has been performed using numerical techniques. The extent of diffusion is characterized by the instantaneous and average diffusion parameters. These parameters are functions of the diffusion Fourier number, the partition ratio and the fraction solid. Numerical results are presented as an approximate model, which is used to predict the average diffusion parameter and calculate the composition of the interdendritic liquid during solidification.

Ganesan, S.↗

NASA NTRS1990

Influence of low-gravity solidification on heterogeneous nucleation in stable iron-carbon alloys

The effect of gravity on the processes of nucleation and growth of Fe-C alloys during directional solidification was investigated in experiments in which inoculated and uninoculated samples of an alloy of the gray iron type were solidified on ground (1 g) and under the low-gravity (low-g) and high-gravity (high-g) conditions obtained by aircraft parabolic flights. It was found that a higher number of grains was obtained during solidification in high-g condition, due to higher convection in high-g. It was demonstrated that grain multiplication due to convection can contribute up to 23 percent of the total number of grains resulting from heterogeneous nucleation of uninoculated samples. For the case of inoculated samples, it was found that the contribution of the convection-induced nucleation can be as high as 30 percent, but can be zero at very low or very high grain numbers.

Tian, Huameng↗

NASA NTRS1990

Numerical simulation of solidification in a horizontal cylindrical annulus charged with an aqueous salt solution

A computational study of solidification of a binary Na2CO3 solution in a horizontal cylindrical annulus is performed using a continuum formulation with a control-volume based, finite-difference scheme. The initial conditions were selected to facilitate the study of counter thermal and solutal convection, accompanied by extensive mushy region growth. Numerical results are compared with experimental data with mixed success. Qualitative agreement is obtained for the overall solidification process and associated physical phenomena. However, the plume thickness calculated for the solutally-driven convective upflow is substantially smaller than the observed value. Evolution of double-diffusive layers is predicted, but over a time scale much smaller than that observed experimentally. Good agreement is obtained between predicted and measured results for solid growth, but the mushy region thickness is significantly overpredicted.

Neilson, D. G.↗

NASA NTRS1989

Solidification processing of monotectic alloy matrix composites

Directionally solidified aluminum-indium alloys of the monotectic composition were found to form an in situ rod composite which obeys a lambda exp 2 R = constant relation. The experimental data shows good agreement with previously reported results. A theoretical boundary between cellular and dendritic growth conditions was derived and compared with experiments. The unique wetting characteristics of the monotectic alloys can be utilized to tailor the interface structure in metal matrix composites. Metal matrix composites with monotectic and hypermonotectic Al-In matrices were made by pressure infiltration, remelted and directionally solidified to observe the wetting characteristics of the alloys as well as the effect on structure of solidification in the constrained field of the fiber interstices. Models for monotectic growth are modified to take into account solidification in these constrained fields.

Frier, Nancy L.↗

NASA NTRS1989

Rapid solidification of high-conductivity copper alloys

The main objective was to develop improved copper alloys of high strength and high thermal and electric conductivity. Chill block melt spinning was used to produce binary alloys of Cu-Cr and Cu-Zr, and ternary alloys of Cu-Cr-Ag. By quenching from the liquid state, up to 5 atomic percent of Cr and Zr were retained in metastable extended solid solution during the rapid solidification process. Eutectic solidification was avoided and the full strengthening benefits of the large volume fraction of precipitates were realized by subsequent aging treatment. The very low solid solubility of Cr and Zr in Cu result in a high conductivity Cu matrix strengthened by second phase precipitates. Tensile properties on as-cast and aged ribbons were measured at room and elevated temperatures. Precipitate coarsening of Cr in Cu was studied by changes in electrical resistance during aging. X-ray diffraction was used to measure the lattice parameter and the degree of supersaturation of the matrix. The microstructures were characterized by optical and electron microscopy.

Bloom, Theodore Atlas↗

NASA NTRS1990

Recent advances, trends and new perspectives via enthalpy-based finite element formulations for applications to solidification problems

The present paper describes recent advances and trends in finite element developments and applications for solidification problems. In particular, in comparison to traditional methods of approach, new enthalpy-based architectures based on a generalized trapezoidal family of representations are presented which provide different perspectives, physical interpretation and solution architectures for effective numerical simulation of phase change processes encountered in solidification problems. Various numerical test models are presented and the results support the proposition for employing such formulations for general phase change applications.

Tamma, Kumar K.↗

NASA NTRS1990

Splat-quench solidification of freely falling liquid-metal drops by impact on a planar substrate

Results are presented of a study of the splat-quench solidification of small, freely falling liquid drops of the alloy Nitronic 40W, which were allowed to impact on a solid, planar, horizontal substrate. The principal variable was the substrate material, with substrates of copper, alumina and fused quartz being used. The shapes of the solidified splats were correlated with a simplified model for the energetics of the splatting process and with the thermal conductivity of the substrate. The measured results are qualitatively in agreement with theoretical predictions, and suggestions are offered for a more comprehensive model of splat-quench solidification. A relationship between sessile droplet diameter and parent wire diameter is also presented and discussed.

Collings, E. W.↗