Statistical Analysis of the Eigenmode Spectrum in the SRF Cavities with Mechanical Imperfections [PowerPoint]
SRF cavities are very good resonance systems with multiple Eigenmodes (HOMS) with very low losses (high Q-factors).
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
SRF cavities are very good resonance systems with multiple Eigenmodes (HOMS) with very low losses (high Q-factors).
The differential cross section and spin density matrix elements for w(782) meson photoproduction in the reaction 9Be(yp,pw)8Li have been measured in the energy range 4.4 - 5.4 GeV using the Radphi detector. Radphi used a 9Be target, and identified the final state by triggering on the recoil proton plus neutrals. At the kinematics of this experiment, the observed nuclear cross section is consistent with the p cross section measured by prior experiments when multiplied by 4 for the number of protons in the nucleus, in agreement with a naive spectator model. However, the spin observables show some deviation from a spectator model, particularly approaching the low-t limit of the experimental acceptance. Besides the cross sections, spin density matrix elements in Gottfried Jackson and Helicity frame have been measured. The data selection is discussed and the acceptance is examined and quantified.
• Thermal ionization mass spectrometry (TIMS) is a “gold standard’ technique for actinide isotope amount ratio and assay measurements. • Ubiquitously used in: • Nuclear Nonproliferation • Nuclear Safeguards • Nuclear Forensics • Basic Science • Savannah River National Laboratory (SRNL) installed a new Thermo Scientific TRITON Plus TIMS in early 2024.
• The SRS H-Canyon Building is a critical facility under the responsibility of DOE-EM. • It includes an Air Exhaust Tunnel (HCAEX) that allows for ventilation of the process airflow. • Inspections are performed remotely because of hazards, e.g. radioactivity, debris, high airflow, and nitric acid vapors.
CONCLUSIONS AND RECOMMENDATIONS •“There is no evidence of pit depth growth over the last 15-years demonstrating the effectiveness of the corrosion control program. •“Incipient pits” are not growing and are likely pre-service pits. • No need to continue measuring these tiny pits. However, due to the random nature of pit initiation and the potentially accelerated growth of a pit, periodic monitoring for pit growth is prudent. 1. No reportable pits were identified. All identified pits are far less than the reportable depth of 25% of the nominal wall thickness. 2. No cracking was identified. 3. There is no evidence that active, systemic corrosion has occurred in Tank 29 during its 38-year service history as of 2009.
Explore the source record for details and available documents.
Thermal ionization mass spectrometry (TIMS) is a “gold standard’ technique for actinide isotope amount ratio and assay measurements. • Ubiquitously used in: • Nuclear Nonproliferation • Nuclear Safeguards • Nuclear Forensics • Basic Science • Savannah River National Laboratory (SRNL) installed a new Thermo Scientific TRITON Plus TIMS in early 2024.
Poster for APS DPP conference
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The rapid evolution in materials science has resulted in a significant interest in high-entropy alloys (HEAs) for their unique properties. This study focuses on understanding both quaternary and quinary body-centered cubic (BCC) of 12 refractory-based HEAs, and on analysis of their electronic structures, lattice distortions, mechanical, and thermal properties. A comprehensive assessment is undertaken by means of density functional theory (DFT)-based first principles calculations. It is well known that multiple constituents lead to notable lattice distortions, especially in quinary HEAs. This distortion, in turn, has significant implications on the electronic structure that ultimately affect mechanical and thermal behaviors of these alloys such as ductility, lattice thermal conductivity, and toughness. Our in-depth analysis of their electronic structures revealed the role of valence electron concentration and its correlation with bond order and mechanical properties. Local lattice distortion (LD) was investigated for these 12 HEA models. M1 (WTiVZrHf), M7 (TiZrHfW), and M12 (TiZrHfVNb) have the highest LD whereas the models M3 (MoTaTiV), M5 (WTaCrV), M6 (MoNbTaW), and M9 (NbTaTiV) have the less LD. Furthermore, we investigated the thermal properties focusing on Debye temperature (ΘD), thermal conductivity (κ), Grüneisen parameter (γα), and dominant phonon wavelength (λdom). The NbTaTiV(M9) and TiVNbHf(M10) models have significantly reduced lattice thermal conductivities (κL). This reduction is due to the mass increase and strain fluctuations, which in turn signify lattice distortion. The findings not only provide an understanding of these promising materials but also offer guidance for the design of next-generation HEAs with properties tailored for potential specific applications.
The protection, control, and monitoring of the power grid is not possible without accurate measurement devices. As the percentage of renewable energy sources penetrating the existing grid infrastructure increases, so do uncertainties surrounding their effects on the everyday operation of the power system. Many of these devices are sources of high-frequency transients. These transients may be useful for identifying certain events or behaviors otherwise not seen in traditional analysis techniques. Therefore, the ability of sensors to accurately capture these phenomena is paramount. In this work, two commercial-grade power system distribution sensors are investigated in terms of their ability to replicate high-frequency phenomena by studying their responses to three events: a current inrush, a microgrid “close-in”, and a fault on the terminals of a wind turbine. Kernel density estimation is used to derive the non-parametric probability density functions of these error distributions and their adequateness is quantified utilizing the commonly used root mean square error (RMSE) metric. It is demonstrated that both sensors exhibit characteristics in the high harmonic range that go against the assumption that measurement error is normally distributed.
In order to quantify the influence of magnetic fields on acoustic mode parameters and flows in and around active regions, we analyze the differences in the parameters in magnetically quiet regions nearby an active region (which we call “nearby regions”), compared with those of quiet regions at the same disk locations for which there are no neighboring active regions. We also compare the mode parameters in active regions with those in comparably located quiet regions. Our analysis is based on ring-diagram analysis of all active regions observed by the Helioseismic and Magnetic Imager (HMI) during almost five years. We find that the frequency at which the mode amplitude changes from attenuation to amplification in the quiet nearby regions is around 4.2 mHz, in contrast to the active regions, for which it is about 5.1 mHz. This amplitude enhacement (the “acoustic halo effect”) is as large as that observed in the active regions, and has a very weak dependence on the wave propagation direction. The mode energy difference in nearby regions also changes from a deficit to an excess at around 4.2 mHz, but averages to zero over all modes. The frequency difference in nearby regions increases with increasing frequency until a point at which the frequency shifts turn over sharply, as in active regions. However, this turnover occurs around 4.9 mHz, which is significantly below the acoustic cutoff frequency. Inverting the horizontal flow parameters in the direction of the neigboring active regions, we find flows that are consistent with a model of the thermal energy flow being blocked directly below the active region.
We construct the most complete sample of supernova remnants (SNRs) in any galaxy—the Large Magellanic Cloud (LMC) SNR sample. We study their various properties such as spectral index (α), size, and surface brightness. We suggest an association between the spatial distribution and environment density of LMC SNRs, and their tendency to be located around supergiant shells. We find evidence that the 16 known type Ia LMC SNRs are expanding in a lower density environment compared to the Core-Collapse (CC) type. The mean diameter of our entire population (74) is 41 pc, which is comparable to nearby galaxies. We did not find any correlation between the type of SN explosion, ovality, or age. The N(<D) relationship with slope a = 0.96 implies that the randomized diameters are readily mimicking such an exponent. The rate of SNe occurring in the LMC is estimated to be ∼1 per 200 yr. The mean α of the entire LMC SNR population is −0.52, which is typical of most SNRs. However, our estimates show a clear flattening of the synchrotron α as the remnants age. As predicted, the CC SNRs in our sample are significantly brighter radio emitters than type Ia remnants. We also estimate the Σ--D relation for the LMC to have a slope ∼3.8, which is comparable with other nearby galaxies. We also find the residency time of electrons in the galaxy (4.0–14.3 Myr), implying that SNRs should be the dominant mechanism for the production and acceleration of CRs.
The invention relates to a method and apparatus for simultaneously processing different sources of test data into informational data and then processing different categories of informational data into knowledge-based data. The knowledge-based data can then be communicated between nodes in a system of multiple computers according to rules for a type of complex, hierarchical computer system modeled on a human brain.
Abstract Not Provided
Abstract Not Provided
Abstract not provided.