Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support Facility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Semi-Empirical Correlation for the Onset of Density Wave Oscillations in a Helical Coil Steam Generator

NuScale Power has completed full length helical coil steam generator (HCSG) tests at SIET Laboratories in Piacenza, Italy. The test program included an investigation of the onset and evolution of density wave oscillations (DWO). This paper describes the mechanisms leading to the onset of DWO as inferred from tests performed in the full-height TF-2 counter-flow test facility. This research supports the concept that the onset of DWO is caused by liquid bridging inside the boiling length of the tubes. Using a separate cylinders approximation, a DWO onset correlation is obtained by performing a steady-state momentum balance on the density front created by liquid bridging. This yields a momentum balance equation in terms of a set of dimensionless superficial velocities, a corresponding dimensionless pressure drop term and an average void fraction. Envelope theory is then used to obtain a critical void fraction which is substituted into the dimensionless momentum balance to obtain a DWO onset correlation similar to the Wallis counter-current flooding correlation. A comparison of the DWO onset correlation to the TF-2 DWO experimental data is presented and shows excellent agreement when the average equilibrium vapor quality is greater than 0.2.

Density Wave Oscillations, Helical Coil Steam Gene↗
DOE OSTI2023

Overview of H- radio frequency ion sources for particle accelerators

Particle accelerators are among the most important scientific tools of the modern era. Large accelerator complexes have supported scientific user facilities which have had an enormous societal impact spanning many decades and enabling the work of thousands of scientific users worldwide contributing to many Nobel prizes in physics, biology and chemistry [1]. Many of the large hadron facilities employ accelerator complexes which include cyclotrons, synchrotrons, storage rings, linear or tandem accelerators and deliver ion beams of very high-intensity and/or very high-energy to their user facilities. These accelerator complexes require the injection of high-intensity beams of ions which are produced within an ion source and formed within a plasma or by bombardment of a surface [2]. Increasingly, RF systems are being utilized, to generate these ion-rich plasmas due to their high reliability and minimal use of consumable components. This report will first discuss the basic mechanisms of ion formation and plasma generation as well as some specifics of RF/microwave generators, matching circuits and plasma coupling structures typically employed. A detailed discussion will then be given of the RF-driven negative ion source systems employed by US Spallation Neutron Source as well as those used in similar facilities located around the globe. REFERENCES [1]Vladimir Shiltsev, “Particle beams behind physics discoveries”, Physics Today 73, Issue 4, 32 (2020) [2]Robert Welton et al, “Negative hydrogen ion sources for particle accelerators: Sustainability issues and recent improvements in long-term operations”, Journal of Physics Conf Series, 2244 012045

Welton, Robert F.↗
DOE OSTI2025

NSTTF Voucher Program RPPR-1 (Final Report)

Sandia issued a Request for Proposals (RFP) to solicit proposals from industry, academia, research laboratories, government agencies, and individuals on the use of the National Solar Thermal Test Facility (NSTTF) to increase CSP technology market adoption across the United States. The voucher funds will be used to cover the cost of NSTTF test facilities usage and technical staff support for analysis, design and test planning and execution. Sandia will collect submitted proposals, coordinate their review through DOE SETO, and work in partnership or under contract with the applicants to complete the funded research. Through this program, participants will be supported in their use of the world class facilities and expertise available at the NSTTF at Sandia in Albuquerque, NM to accelerate the advancement of CST technologies toward meeting 2030 SETO goals for CSP. The goals of this semi-annual reporting period were to complete all administrative tasks and contracting, begin testing on three of the vouchers, and report on initial findings. The fourth voucher (University of Michigan) is predicated on the results of an ongoing heat exchanger test that is expected to conclude by the end of FY22.

14 SOLAR ENERGY↗
DOE OSTI2022

Nurturing the Industrial Accelerator Technology Base in the US

The purpose of this white paper is to discuss the importance of having a world class domestic industrial vendor base, capable of supporting the needs of the particle accelerator facilities, and the necessary steps to support and develop such a base in the United States. The paper focuses on economic, regulatory, and policy-driven barriers and hurdles, which presently limit the depth and scope of broader industrial participation in US accelerator facilities. It discusses the international competition landscape and proposes steps to improve the strength and vitality of US industry.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Cross-Cutting Software Solutions in Support of Experimental Analysis Challenges at National Scattering Facilities

Rapid improvements in instrumentation at neutron and light source combined with new capabilities in computing, data analytics, and machine learning offer unprecedented scientific capabilities to address fundamental and applied science questions in a wide area of subjects from quantum materials to biological systems. In order to make these capabilities accessible to the broader scientific community, significant developments are needed related to workflow spanning from experimental control to advanced materials simulations as well as the underpinning scientific software. In this chapter, we explore these needs and recent developments at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. A central part of the workflow at the SNS is the data reduction framework Mantid which is developed as a partnership between European and US neutron-scattering facilities.

Proffen, Thomas↗
DOE OSTI2020

Soil Sample Plan in Support of the Site 300 Explosives Waste Treatment Facility Ecological Risk Assessment Pursuant to the Hazardous Waste Facility Permit, Part V, Special Condition #14 a-f. August 2020

The Department of Toxic Substances Control issued the Final Hazardous Waste Facility Permit to Lawrence Livermore National Laboratory, Site 300 in 2017. As part of the continual process to ensure waste treatment emissions are not impacting ecological receptors, LLNL analyzed soil samples in the vicinity of the Explosive Waste Treatment Facility (EWTF) Burn Units (i.e., Burn Cage and Burn Pan) and the Detonation Pad. Soil samples were analyzed by EPA Solid Waste 846 Methods for furans, explosives, metals, and semivolatile compounds. In all samples, furans, explosives, and semi-volatile organic compounds were not detected. Metals were detected at concentrations below background levels. This soil sample plan will sample the same four downwind areas of the Burn Units and the same downwind areas of the Detonation, as well as including four new sample locations. The four new locations will be located to the northeast and southwest of the Burn Units and Detonation (as shown in Figure 3). The constituents to be analyzed are in Tables 2 and 3. Perchlorate was not identified as a constituent of concern in the 2007 Soil Sampling Plan. However, for this plan, all soil samples will be analyzed for perchlorate. After completion of the sampling event, a soil sample report will be submitted to DTSC in accordance with requirements specified in the Hazardous Waste Facility Permit, Part V, Special Conditions 16 a-f. This proposed soil sampling plan will be fully implemented no later than one year after receiving DTSC approval, in accordance with the Hazardous Waste Facility Permit, Part V, Special Condition 15.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Soil Sample Workplan in Support of the Site 300 Explosives Waste Treatment Facility Ecological Risk Assessment Pursuant to the Hazardous Waste Facility Permit (Part V, Special Condition #14 a-f)

The Department of Toxic Substances Control issued the Final Hazardous Waste Facility Permit to Lawrence Livermore National Laboratory, Site 300 in 2017. As part of the continual process to ensure waste treatment emissions are not impacting ecological receptors, LLNL analyzed soil samples in the vicinity of the Explosive Waste Treatment Facility (EWTF) Burn Units (i.e., Burn Cage and Burn Pan) and the Detonation Pad. Soil samples were analyzed by EPA Solid Waste 846 Methods for furans, explosives, metals, and semi-volatile compounds. In all samples, furans, explosives, and semi-volatile organic compounds were not detected. Metals were detected at concentrations below background levels. This soil sample plan will sample the same four downwind areas of the Burn Units and the same downwind areas of the Detonation, as well as including four new sample locations. The four new locations will be located to the northeast and southwest of the Burn Units and Detonation (as shown in Figure 3). The constituents to be analyzed are in Tables 7 and 8. Perchlorate was not identified as a constituent of concern in the 2007 Soil Sampling Plan. However, for this plan, all soil samples will be analyzed for perchlorate. Nitrate and all CAM17 metals have been added to the sampling plan to comply with DTSC comments received in correspondence dated June 4, 2021. After completion of the sampling event, a soil sample report will be submitted to DTSC in accordance with requirements specified in the Hazardous Waste Facility Permit, Part V, Special Conditions 16 a-f. This proposed soil sampling plan will be fully implemented no later than one year after receiving DTSC approval, in accordance with the Hazardous Waste Facility Permit, Part V, Special Condition 15.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Development of integrated neutronics and thermal analysis capabilities to support design and optimization of fusion engineering demonstration facility systems and blanket design (Final Scientific/Technical Report)

A fusion engineering demonstration facility would be the first step in the commercial fusion plant developmental pathway that aims to be an engineering demonstration of tritium self-sufficiency. One of the primary requirements for tritium self-sufficiency, as well as to ensure low plant tritium release to the external environment, is to minimize the tritium loss through the internal components, which requires accurate predictions of the tritium behavior for a wide range of materials and system conditions. This grant addressed the lack of a comprehensive model which accounts for particular conditions, such as the significance of temperature fields and neutronics information, and the systematic uncertainty quantification of associated material properties that impact tritium generation, utilization, and loss mechanisms in the blanket.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Development of integrated neutronics and thermal analysis capabilities to support design and optimization of fusion engineering demonstration facility systems and blanket design (Final Scientific/Technical Report)

A fusion engineering demonstration facility would be the first step in the commercial fusion plant developmental pathway that aims to be an engineering demonstration of tritium self- sufficiency. One of the primary requirements for tritium self-sufficiency, as well as to ensure low plant tritium release to the external environment, is to minimize the tritium loss through the internal components, which requires accurate predictions of the tritium behavior for a wide range of materials and system conditions. This grant addressed the lack of a comprehensive model which accounts for particular conditions, such as the significance of temperature fields and neutronics information, and the systematic uncertainty quantification of associated material properties that impact tritium generation, utilization, and loss mechanisms in the blanket.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fire and Thermal Experiments in Support of the Model Evaluation Protocol for LNG Facility Fires

The motivation for the experiments reported here pertains to the siting of Liquefied Natural Gas (LNG) facilities which requires assessing the potential adverse radiant thermal impacts of accidental fires on the public. The objective is to obtain data on jet fires, pool fires, fireballs, and concrete walls that could serve as thermal barriers for model validation. The fuels tested include ethane, ethylene, propane, and isopentane.

42 ENGINEERING↗
DOE OSTI2024

Discovery Science and Inertial Fusion Energy Research at the Jupiter Laser Facility (Research Performance Progress Report)

The goal of this project is to provide operational support to run the Jupiter Laser Facility within the LaserNetUS network to achieve the following four objectives: • Develop new science, techniques, and platforms for discovery science and IFE research, in partnership with academia, other LaserNetUS nodes, and the greater community. • Advance the development of secondary sources of photons and particles for applications relevant to discovery science and IFE; • Serve as a testbed for new laser, optical, target, and diagnostic capabilities that will advance IFE; • Attract, train, and retain talent in high-energy-density and laser science that will be essential in furthering development of IFE, and help build new collaborations between national laboratory and academic researchers. We have accomplished our four objectives by: • Providing access to the three JLF platforms (Titan, Janus, and COMET) to LaserNetUS users after their proposals have been independently reviewed and ranked by the LaserNetUS PRP; • Providing expertise and technical capabilities to support focused science research thrusts at the facility; • Promoting and maintaining technical relationships and collaborations with other members of the LaserNetUS community to nurture and grow the discovery science and IFE workforce— especially students and early career scientists—on LaserNetUS facilities. • Augmenting JLF with specific improvements while coordinating efforts with LLNL organizations and collaborators to provide users with optimal laser, target, and diagnostic resources to help them maximize technical impact.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Simulations of the High Temperature Test Facility using SAM

Under the support from the U.S. Department of Energy Office of Nuclear Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an effort is being pursued to support the modeling and simulation needs of high-temperature gas-cooled reactor (HTGR) technology development. There is a particular need for advanced modeling and simulation methods and tools to predict thermal-fluid behavior in the nuclear reactor primary system during safety-related transients. This report focuses on one such activity related to HTGR: developing a model of the High Temperature Test Facility (HTTF) at Oregon State University using the system-level code SAM, and using the model to understand thermal response behavior in the facility. Note this activity is coordinated with the DOE-NE’s Advanced Reactor Technology Gas-Cooled Reactor Program

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Radiological Considerations Supporting the American Medical Isotope Producer Niowave

This report provides a summary of work performed by Savannah River National Laboratory (SRNL) during FY22 in support of Niowave, an American Medical Isotope Production (AMIP) facility. SRNL served in a technical support role, funded by NA-231, supporting Niowave in the beginning of non radiological functional testing of their airport facility in FY22. Through this agreement, SRNL provides Niowave access to subject matter experts (SMEs) for questions that may arise during the drafting of engineering plans, facility policies, and/or response procedures. This report summarizes discussions between SRNL and Niowave about guidance concerning issues with the floor of the hot cells, dispersible removable contamination (beta emitting fission product), hot cell operation specifically utilization of cameras or mirrors, and the process for removing contaminated waste from the hot cell. Lessons learned and other various resources provided to Niowave by SRNL during FY22 are referenced in this report. This work was funded through NNSA’s Office of Material Management and Minimization, Conversion Office (NA-231).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

North Slope Alaska and Tethered Balloon Systems: ARM Facilities Monthly Status Update

In support of the DOE Office of Science, Sandia National Labs is one of nine national laboratories which oversees the Atmospheric Radiation Measurement (ARM) Program. The Sandia ARM team has an obligation to fulfill its mission to provide the nation with data to improve the understanding of climate processes and the representation of those processes in climate models. Sandia’s ARM team’s ability to provide detailed and accurate descriptions of the Earth’s atmosphere in diverse climate regimes assists the DOE in development of sustainable solutions to the nation’s energy and environmental challenges. Sandia Labs manages ARM atmospheric facilities along the North Slope of Alaska (NSA) at Utqiagvik as well as the Tethered Balloon System (TBS). Activities conducted at NSA and with the TBS aide in data collection for the ARM data archive. An overview of these activities for the month of December follows.

54 ENVIRONMENTAL SCIENCES↗