Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface complexation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Use of Tracer Elements for Estimating Community Exposure to Marcellus Shale Development Operations

Since 2009, unconventional natural gas development (UNGD) has significantly increased in Appalachia’s Marcellus Shale formation. Elevations of fine particulate matter <2.5 µm (PM2.5), have been documented in areas surrounding drilling operations during well stimulation. Furthermore, many communities are experiencing increased industrial activities and probable UNGD air pollutant exposures. Recent studies have associated UNGD emissions with health effects based on distances from well pads. In this study, PM2.5 filter samples were collected on an active gas well pad in Morgantown, West Virginia, and three locations downwind during hydraulic stimulation. Fine particulate samples were analyzed for major and trace elements. An experimental source identification model was developed to determine which elements appeared to be traceable downwind of the UNGD site and whether these elements corresponded to PM2.5 measurements. Results suggest that 1) magnesium may be useful for detecting the reach of UNGD point source emissions, 2) complex surface topographic and meteorological conditions in the Marcellus Shale region could be modeled and confounding sources discounted, and 3) well pad emissions may be measurable at distances of at least 7 km. If shown to be more widely applicable, future tracer studies could enhance epidemiological studies showing health effects of UNGD-associated emissions at ≥15 km.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Editorial for Special Issue “Environmentally Sound In Situ Recovery Mining of Uranium”

This Special Issue features seven articles that cover a range of topics pertaining to the environmentally sound in situ recovery mining of uranium (U ISR). The topics include: (1) methods for assessing the potential environmental impacts of future U ISR operations using historical operational records and available geohydrologic, geochemical and climate data in a specific regional setting; (2) laboratory column studies to parameterize a uranium surface complexation model that can be used to predict uranium fate and transport in groundwater; and (3) a field evaluation of both a chemical reductant and a biostimulant to promote reducing geochemical conditions after oxidative mining at a U ISR facility.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Community-Informed Urban Flood Modeling for Impact Mitigation

The intensification of the hydrologic cycle due to climate change poses a threat to aging and under-designed water infrastructure systems which cannot adequately manage intense storm events. Developing a comprehensive plan for managing rain-driven flooding events is challenging due to uncertainties in the magnitude and frequency of future storm events and conflicting stakeholder objectives. In the City of Baltimore, Maryland, stormwater infrastructure is struggling to keep up with rainfall-driven (pluvial) flooding events, which regularly damage housing and disrupt transportation for residents. In this study, a hybrid of community engagement, numerical modeling, and artificial intelligence techniques are employed to explore prospective urban flooding adaptations. Community engagement drives the development of an urban flooding model (EPA Storm Water Management Model) for the Baltimore Harbor watershed. The model integrates complex surface and subsurface stormwater infrastructure data from the City, high-resolution spatial data, insights from local public works experts, and the lived experiences of City residents. This co-developed model simulates adaptations of interest to stakeholders in the city, including green and grey infrastructure and operational management strategies. Stormwater management scenarios focused on inlet cleaning and spatially concentrated green infrastructure are found to be the most effective in reducing flood depths in community priority locations. Together, these adaptations can reduce the duration of intersection inundation by more than twenty minutes, allowing for quicker emergency response and restoration of typical transportation systems. Future work will combine this community engaged flooding model with the Deep Uncertainties Pathways framework to explore tradeoffs between adaptations and develop dynamic adaptations which align with community objectives, enhance climate resilience in Baltimore, and can be adjusted in response to changing future conditions.

Ava, Spangler [Pennsylvania State University]↗
DOE OSTI2026

Community-Engaged Modeling of Urban Flood Adaptation Pathways

Climate change is intensifying the hydrologic cycle, leading to more frequent and severe rainfall-driven (pluvial) flooding in urban areas. In the mid-Atlantic US cities, aging and under-designed stormwater infrastructure is increasingly strained by these events, resulting in recurring damage to property and disruptions to transportation networks. In this study, we combine community engagement with hydrologic modeling to develop and evaluate potential urban flood adaptation strategies. Over a three-year period, local technical experts and community representatives met regularly to discuss flooding concerns, identify priorities, and co-develop adaptation strategies. These discussions informed the development of an urban flooding model (EPA Storm Water Management Model) for the Baltimore Harbor watershed, the focus location of this study. The flooding model integrates complex surface and subsurface stormwater infrastructure data, local expert knowledge, and community insights. We simulate stakeholder-prioritized adaptations, such as green and gray infrastructure strategies. Model results demonstrate that enhanced infrastructure maintenance is the most effective adaptation for reducing flood depths, but has varied effects across the watershed, and can increase flooding in some locations. Spatially concentrated greening provides limited benefit to the watershed as a whole, but moderate benefit in community priority areas. Together, these adaptations have the potential to reduce flood depths by as much as 58% in some locations, greatly reducing property damage and mobility impacts, primary concerns of stakeholders. Future work will implement robust optimization tools to search for adaptations which meet stakeholder objectives and perform highly under varied future climate conditions. This work contributes to the expanding literature on collaborative modeling and demonstrates that community-engaged approaches can enhance model credibility and generate more actionable insights for communities seeking to strengthen climate resilience.

Spangler, Ava [Pennsylvania State University] (ORC↗
DOE OSTI2026

Community-Informed Urban Flood Modeling for Impact Mitigation

Climate change is intensifying the hydrologic cycle, leading to more frequent and severe rainfall-driven (pluvial) flooding in urban areas. In the mid-Atlantic US cities, aging and under-designed stormwater infrastructure is increasingly strained by these events, resulting in recurring damage to property and disruptions to transportation networks. In this study, we combine community engagement with hydrologic modeling to develop and evaluate potential urban flood adaptation strategies. Over a three-year period, local technical experts and community representatives met regularly to discuss flooding concerns, identify priorities, and co-develop adaptation strategies. These discussions informed the development of an urban flooding model (EPA Storm Water Management Model) for the Baltimore Harbor watershed, the focus location of this study. The flooding model integrates complex surface and subsurface stormwater infrastructure data, local expert knowledge, and community insights. We simulate stakeholder-prioritized adaptations, such as green and gray infrastructure strategies. Model results demonstrate that enhanced infrastructure maintenance is the most effective adaptation for reducing flood depths, but has varied effects across the watershed, and can increase flooding in some locations. Spatially concentrated greening provides limited benefit to the watershed as a whole, but moderate benefit in community priority areas. Together, these adaptations have the potential to reduce flood depths by as much as 58% in some locations, greatly reducing property damage and mobility impacts, primary concerns of stakeholders. Future work will implement robust optimization tools to search for adaptations which meet stakeholder objectives and perform highly under varied future climate conditions. This work contributes to the expanding literature on collaborative modeling and demonstrates that community-engaged approaches can enhance model credibility and generate more actionable insights for communities seeking to strengthen climate resilience.

Baltimore MD↗
NASA NTRS1971

Mechanism of the oxidation of titanium disilicide.

Study of the oxidation of TiSi2 at temperatures of 300 to 1300 C. Wafers prepared using the techniques of powder metallurgy had densities of 95 to 98% of the theoretical value. On oxidation at temperatures up to 600 C, the polished wafers formed a protective, titania-silica glass. The rate data indicate a complex surface and diffusion-limited mechanism. Above 600 deg C, the oxide consisted of an amorphous SiO2 film with crystalline islands of TiO2 (rutile). From 1000 to 1300 C, parabolic kinetics with an activation energy of 21.3 kcal/mole were observed. These data are consistent with a model in which the rate-determining step is the diffusion of oxygen through the silica film with the simultaneous diffusion of titanium from the substrate to the islands of rutile growing on top of the amorphous silica.

Schwettmann, F. N.↗
NASA NTRS1973

Polarimetric observations of 9 Metis, 15 Eunomia, 89 Julia, and other asteroids.

White-light polarization curves for a number of asteorids are presented. All have well-developed negative branches, suggestive of relatively dark, texturally complex surfaces - possibly regoliths. Geometric albedos, estimated from the positive branch of the polarization curves, show that a significant dispersion in surface albedo exists within the asteroid belt.

Veverka, J.↗
NASA NTRS1972

Development of a gas pressure bonded four-pole alternator rotor

Methods were developed for fabrication of a solid four pole alternator rotor by hot isostatic pressure welding. The rotor blanks welded in this program had complex geometrical mating interfaces and were of considerable bulk, being approximately 3-1/2 inches (0.089 meters) in diameter and 14 inches (0.356 meters) long. Magnetic end pieces were machined from AlSl 4340 steel, while the non-magnetic central section was of Inconel 718. Excellent welds were produced which were shown to be responsive to post weld heat treatments which substantially improved joint strength. Prior to welding the rotors, test specimens of complex geometry were welded to demonstrate that complex surfaces with intentional mechanical misfit could be readily joined using HIP welding. This preliminary work demonstrated not only that interface compliance is achieved during welding but that welding pressure is developed in these thick sections sufficient to produce sound joints. Integral weld-heat treatment cycles were developed that permitted the attainment of magnetic properties while minimizing residual stress associated with the allotropic transformation of 4340 steel.

Lessmann, G. G.↗
NASA NTRS1974

Fluoroscopic tomography

A fluoroscopic tomography system capable of synthesizing body sections at a number of levels within the body has been developed. The synthesized body sections may lie either in a range of planes parallel to, tilted with respect to, skewed with respect to, or both tilted and skewed with respect to the plane of motion of the X-ray tube target. In addition, body sections can be presented which are contoured to the patient's anatomy. That is to say, they may even encompass such complex surfaces as a quadratic hyperplane. In addition, tomograms of organs in motion can be imaged.

Baily, N. A.↗
NASA NTRS1974

Six-color photometry of Iapetus, Titan, Rhea, Dione and Tethys

Six-color photometric observations made during Saturn's 1972/73 opposition enable us to separate the solar phase and orbital phase contributions to the observed light variations of Iapetus, Titan, Rhea, Dione and Tethys. Titan shows no orbital variations, but has phase coefficients which range from negligible values in the infrared to 0.014 mag/deg in the ultraviolet. Rhea has a bright leading side, a light curve amplitude of about 0.2 mag, and surprisingly large phase coefficients. Combined with other available information, the observations suggest a very porous, texturally complex surface layer. Dione has a leading side which is a few tenths of a magnitude brighter than the trailing side, but the light curve amplitude has little wavelength dependence and the phase coefficients are significantly smaller than those of Rhea, suggesting a less intricate surface texture. The leading side of Tethys is probably a few tenths of a magnitude brighter than the trailing side. Our Iapetus observations generally supplement the earlier work by Millis.

Noland, M.↗
NASA NTRS1976

Sputtering

The potential of using the sputtering process as a deposition technique is reviewed; however, the manufacturing and sputter etching aspects are also discussed. The basic mechanism for dc and rf sputtering is described. Sputter deposition is presented in terms of the unique advantageous features it offers such as versatility, momentum transfer, stoichiometry, sputter etching, target geometry (coating and complex surfaces), precise controls, flexibility, ecology, and sputtering rates. Sputtered film characteristics, such as strong adherence and coherence and film morphology, are briefly evaluated in terms of varying the sputtering parameters. Also discussed are some of the specific industrial areas which are turning to sputter deposition techniques.

Spalvins, T.↗
NASA NTRS1976

Viking to Mars - Profile of a space expedition

The Viking spacecraft, operations, and findings are reviewed and numerous pictures are presented in an attempt to capture the atmosphere of the Viking expedition. The details of the two Viking spacecraft, each consisting of an orbiter and lander combination launched a Titan III/Centaur are described and illustrated, along with the Viking ground-data and communications system. The principal conclusions of the Viking mission to date are: detection of nitrogen, argon, krypton, and xenon; determination of isotopic ratios of carbon, nitrogen, oxygen, and argon; uniform diurnal meteorological conditions; determination of major elemental abundances; complex surface chemistry; no ubiquitous organic material; 4 to 7% of the sampled surface material is magnetic; discovery of ancient extensive fluvial activity; north permanent polar cap made of water ice; and significant variations of the atmospheric water vapor, the summer hemisphere being much more humid than the winter hemisphere.

Martin, J. S., Jr.↗
NASA NTRS1976

Calculations of molecular ionization energies using a self-consistent-charge Hartree-Fock-Slater method

A numerical-variational method for performing self-consistent molecular calculations in the Hartree-Fock-Slater (HFS) model is presented. Molecular wavefunctions are expanded in terms of basis sets constructed from numerical HFS solutions of selected one-center atomlike problems. Binding energies and wavefunctions for the molecules are generated using a discrete variational method for a given molecular potential. In the self-consistent-charge (SCC) approximation to the complete self-consistent-field (SCF) method, results of a Mulliken population analysis of the molecular eigenfunctions are used in each iteration to produce 'atomic' occupation numbers. The simplest SCC potential is then obtained from overlapping spherical atomlike charge distributions. Molecular ionization energies are calculated using the transition-state procedure; results are given for CO, H2O, H2S, AlCl, InCl, and the Ni5O surface complex. Agreement between experimental and theoretical ionization energies for the free-molecule valence levels is generally within 1 eV. The simple SCC procedure gives a reasonably good approximation to the molecular potential, as shown by comparison with experiment, and with complete SCF calculations for CO, H2O, and H2S.

Rosen, A.↗
NASA NTRS1976

Sputtering

This paper primarily reviews the potential of using the sputtering process as a deposition technique; however, the manufacturing and sputter etching aspects are also discussed. Since sputtering is not regulated by classical thermodynamics, new multicomponent materials can be developed in any possible chemical composition. The basic mechanism for dc and rf sputtering is described. Sputter-deposition is described in terms of the unique advantageous features it offers such as versatility, momentum transfer, stoichiometry, sputter-etching, target geometry (coating complex surfaces), precise controls, flexibility, ecology, and sputtering rates. Sputtered film characteristics, such as strong adherence and coherence and film morphology, are briefly evaluated in terms of varying the sputtering parameters. Also described are some of the specific industrial areas which are turning to sputter-deposition techniques.

Spalvins, T.↗
NASA NTRS1982

Articulated Vacuum Chuck

Vacuum chuck conforms to complex surface contours. Gripping surface is polyurethane panel embedded with links of roller chain. Panel flexes under vacuum to adjust to surface contour, and then bolts are tightened to lock configuration. Possible applications of new chuck are in pull-testing contoured surfaces, holding assemblies together for repairs, or for handling unusually-shaped parts.

Peterson, S. A.↗
NASA NTRS1982

Structure and dynamics of the ionosphere

The structure of the Venus ionosphere and the major processes occurring within it are summarized. The daytime ionosphere is created by solar EUV radiation incident on the thermosphere; it is in photochemical equilibrium near its peak at about 142 km, where O2(+) is the major ion, and near diffusive equilibrium in its upper regions, where the major ion is O(+). The day-to-night plasma pressure gradient across the terminator drives a nightward ion flow which, together with electron precipitation, contributes to the formation of the nighttime ionosphere. Large-scale radial holes or plasma depletions extending downwards to nearly the ionization peak in the antisolar region are also observed which are associated with regions of strong radial magnetic fields. The ionopause is a highly dynamic and complex surface, extending from an average altitude of 290 km at the subsolar point to about 1000 km at the terminator and from 200 to over 3000 km on the nightside. A variety of solar wind interaction products are observed in the mantle, a transition region between the ionospheric plasma and the flowing shocked solar wind.

Nagy, A. F.↗
NASA NTRS1982

Rotational modulation of the chromospheric activity in the young solar-type star, X-1 Orionis

The IUE satellite was used to observe one of the youngest G stars (GO V) for which Duncan (1981) derives an age of 6 x 10 to the 8th power years from the Li abundance. Rotational modulation was looked for in the emission flux in the chromospheric and transition region lines of this star. Variations in the Ca 11 K-lines profile were studied with the CHF telescope at Mauna Kea. Results show that the same modulation of the emission flux of Ca 11 due to stellar rotation is present in the transition region feature of C IV and probably of He II. For other UV lines the modulation is not apparent, due to a more complex surface distribution of the active areas or supergranulation network, or a shorter lifetime of the conditions which give rise to these features, or to the uncertainities in the measured line strengths. The Mg II emission flux is constant to within + or - 3.4% implying a rather uniform distribution of Mg II emission areas. The Ca II emission not only shows a measurable variation in intensity but also variations in detailed line profile shape when observed at high resolution.

Boesgaard, A. M.↗
NASA NTRS1983

Morphology and chemistry of projectile residue in small experimental impact craters

Small-scale impact craters (5-7 mm in diameter) were produced with a light gas gun in high purity Au and Cu targets using soda lime glass (SL) and man-made basalt glass (BG) as projectiles. Maximum impact velocity was 6.4 km/s resulting in peak pressures of approximately 120-150 GPa. Copious amounts of projectile melts are preserved as thin glass liners draping the entire crater cavity; some of this liner may be lost by spallation, however. SEM investigations reveal complex surface textures including multistage flow phenomena and distinct temporal deposition sequences of small droplets. Inasmuch as some of the melts were generated at peak pressures greater than 120 GPa, these glasses represent the most severely shocked silicates recovered from laboratory experiments to date. Major element analyses reveal partial loss of alkalis; Na2O loss of 10-15 percent is observed, while K2O loss may be as high as 30-50 percent. Although the observed volatile loss in these projectile melts is significant, it still remains uncertain whether target melts produced on planetary surfaces are severely fractionated by selective volatilization processes.

Horz, F.↗