Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Operational constraints and strategies for systems to effect the sustainable, solar-driven reduction of atmospheric CO 2

The operational constraints for a 6-electron/6-proton CO 2 reduction system that operates at the concentration of CO 2 in the current atmosphere (p CO 2 = 400 ppm) have been evaluated on a variety of scale lengths that span from laboratory scale to global scale. Due to the low concentration of CO 2 in the atmosphere, limitations due to mass transport of CO 2 from the tropopause have been evaluated through five different regions, each with different characteristic length scales: the troposphere; the atmospheric boundary layer (ABL); the canopy layer; a membrane layer; and an aqueous electrolyte layer. The resulting CO 2 conductances, and associated physical transport limitations, will set the ultimate limit on the efficiency and areal requirements of a sustainable solar-driven CO 2 reduction system regardless of the activity or selectivity of catalysts for reduction of CO 2 at the molecular level. At the electrolyte/electrode interface, the steady-state limiting current density and the concomitant voltage loss associated with the CO 2 concentration overpotential in a one-dimensional solar-driven CO 2 reduction cell have been assessed quantitatively using a mathematical model that accounts for diffusion, migration and convective transport, as well as for bulk electrochemical reactions in the electrolyte. At p CO 2 = 400 ppm, the low diffusion coefficient combined with the low solubility of CO 2 in aqueous solutions constrains the steady-state limiting current density to <0.1 mA cm -2 in a typical electrochemical cell with natural convection and employing electrolytes with a range of pH values. Hence, in such a system, the CO 2 capture area must be 100- to 1000-fold larger than the solar photon collection area to enable a >10% efficient solar-driven CO 2 reduction system (based on the solar collection area). This flux limitation is consistent with estimates of oceanic CO 2 uptake fluxes that have been developed in conjunction with carbon-cycle analyses for use in coupled atmosphere/ocean general circulation models. Two strategies to improve the feasibility of obtaining efficient and sustainable CO 2 transport to a cathode surface at p CO 2 = 400 ppm are described and modeled quantitatively. The first strategy employs yet unknown catalysts, analogous to carbonic anhydrases, that dramatically accelerate the chemically enhanced CO 2 transport in the aqueous electrolyte layer by enhancing the acid–base reactions in a bicarbonate buffer system. The rapid interconversion from bicarbonate to CO 2 in the presence of such catalysts near the cathode surface would in principle yield significant increases in the steady-state limiting current density and allow for >10% solar-fuel operation at the cell level. The second strategy employs a thin-layer cell architecture to improve the diffusive transport of CO 2 by use of an ultrathin polymeric membrane electrolyte. Rapid equilibration of CO 2 at the gas/electrolyte interface, and significantly enhanced diffusive fluxes of CO 2 in electrolytes, are required to increase the steady-state limiting current density of such a system. This latter approach however only is feasible for gaseous products, because liquid products would coat the electrode and therefore thicken the hydrodynamic boundary layer and accordingly reduce the diffusive CO 2 flux to the electrode surface. Regardless of whether the limitations due to mass transport to the electrode surface are overcome on the laboratory scale, at global scales the ultimate CO 2 flux limitations will be dictated by mass transport considerations related to transport of atmospheric CO 2 to the boundary plane of the solar-driven reactor system. The transport of CO 2 across the troposphere/ABL interface, the ABL/canopy layer interface, and the canopy layer/electrolyte interface have therefore been assessed in this work, to provide upper bounds on the ultimate limits for the solar-to-fuel (STF) conversion efficiency for systems that are intended to effect the reduction of atmospheric CO 2 in a sustainable fashion at global scale.

54 ENVIRONMENTAL SCIENCES↗

Influential fuel cell systems including effective cathodes and use with remediation efforts

Embodiments may include efficient fuel cell systems including an anode, a cathode, a lead-containing cathode catalyst, at least one proton exchange connector, and perhaps even an external circuit between the anode and the cathode. Other embodiments may include enhanced degradation of contaminants in environmental media such as perhaps petroleum hydrocarbon in groundwater with microbial fuel cells and the like.

30 DIRECT ENERGY CONVERSION↗

Fuselage upwash effects on RSRA rotor systems

The effects of RSRA fuselage configurations on rotor performance and loads have been quantified analytically by means of currently available potential flow and rotor analysis. Four configurations of the Rotor Systems Research Aircraft (RSRA) were considered in this study. They were: (1) fuselage alone (conventional helicopter); (2) fuselage with auxiliary propulsion; (3) fuselage with wings (auxiliary lift); and (4) fuselage with both auxiliary lift propulsion. The rotor system investigated was identical to a CH-47D front rotor except that it had four instead of three blades. Two scaled-down versions of the same rotor were also analyzed to determine the effect of rotor scale on the fuselage upwash effects. The flight conditions considered for the upwash study are discussed. The potential flow models for the RSRA configuration, with and without the wings and the auxiliary propulsion system, are presented. The results of fuselage/wing/propulsion system upwash on performance and loads are also presented.

Cowan, J.↗

RDD-100 and the systems engineering process

An effective systems engineering approach applied through the project life cycle can help Langley produce a better product. This paper demonstrates how an enhanced systems engineering process for in-house flight projects assures that each system will achieve its goals with quality performance and within planned budgets and schedules. This paper also describes how the systems engineering process can be used in combination with available software tools.

Averill, Robert D.↗

Award ER25844: Minimizing System Noise Effects for Extreme-Scale Scientific Simulation Through Function Delegation

In software running on distributed computing clusters, time spent on communication between nodes in the cluster can be a significant portion of the overall computation time; background operating system tasks and other computational noise on the nodes of the system can have a significant impact on the amount of time this communication takes, especially on large systems. The research completed in this period has improved understanding of when such noise will have a significant impact. Specifically, it was demonstrated that not just noise on the nodes, but also noise on the network between nodes can have a significant impact on computation time. It was also demonstrated that noise patterns matter more than noise intensity: very regular noise can cause less disruption than lighter (on average) but less regular noise. It was also demonstrated that the effect of noise is more prominent as the speed of the network between nodes is increased. Furthermore, a tracing tool, Netgauge, was improved via our work, and a system simulator, LogGOPSim, was developed; they can be used by application developers to improve performance of their program and by system designers to mitigate the effects of noise by adjusting the noise characteristics of the operating system. Both have been made freely available as open source programs. In the course of developing these tools, we demonstrated weaknesses in existing methodologies for modeling communication, and we introduced a more detailed model, LogGOPS, for simulating systems. Not only were the deleterious effects of noise explored but we have also offered solutions. Our studies of simulations of system noise have led to specific recommendations on tuning systems to mitigate noise. We have also improved existing approaches to mitigating noise. Non-blocking collective communication avoids the effects of noise by letting communication continue simultaneously with computation (thus being non-blocking), so that the delays in communication introduced by noise have a smaller impact on overall computation time. Potentially, noise can be reduced much further by offloading communication tasks to a separate processing element than the operating system is using. We have improved our library LibNBC, which provides an implementation of non-blocking collectives, via this work. During this research, our proposal to include non-blocking collectives (which used LibNBC as a reference implementation) in the upcoming MPI-3 standard was accepted. As MPI is a ubiquitous and important standard for communication in parallel computing, this demonstrates a certain acceptance of the practicality and desirability of non-blocking collectives. Now that non-blocking collectives are a part of the standard we can expect to see optimized platform-specific implementations of non-blocking collectives. Also as part of this work we have also developed a language GOAL (Global Operation Assembly Language) that can be used as a starting point for defining languages to express optimized communication algorithms.

97 MATHEMATICS AND COMPUTING↗

Ratchet Effects in Active Matter Systems

Ratchet effects can arise for single or collectively interacting Brownian particles on an asymmetric substrate when a net dc transport is produced by an externally applied ac driving force or by periodically flashing the substrate. Recently, a new class of active ratchet systems that do not require the application of external driving has been realized through the use of active matter; they are self-propelled units that can be biological or nonbiological in nature. When active materials such as swimming bacteria interact with an asymmetric substrate, a net dc directed motion can arise even without external driving, opening a wealth of possibilities such as sorting, cargo transport, or micromachine construction. We review the current status of active matter ratchets for swimming bacteria, cells, active colloids, and swarming models, focusing on the role of particle-substrate interactions. Here, we describe ratchet reversals produced by collective effects and the use of active ratchets to transport passive particles. We discuss future directions including deformable substrates or particles, the role of different swimming modes, varied particle–particle interactions, and nondissipative effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Computer Simulation of the System-Wide Effects of Parallel-Offset Route Maneuvers

Most aircraft managed by air-traffic controllers in the National Airspace System are capable of flying parallel-offset routes. This paper presents the results of two related studies on the effects of increased use of offset routes as a conflict resolution maneuver. The first study analyzes offset routes in the context of all standard resolution types which air-traffic controllers currently use. This study shows that by utilizing parallel-offset route maneuvers, significant system-wide savings in delay due to conflict resolution of up to 30% are possible. It also shows that most offset resolutions replace horizontal-vectoring resolutions. The second study builds on the results of the first and directly compares offset resolutions and standard horizontal-vectoring maneuvers to determine that in-trail conflicts are often more efficiently resolved by offset maneuvers.

Lauderdale, Todd A.↗

NNSA's next generation safeguards initiative to define an effective state system of accounting and control

The International Nuclear Safeguards and Engagement Program (INSEP), the international outreach component of the Next Generation Safeguards Initiative (NGSI), is a collaborative program that endeavors to strengthen international safeguards at all stages of nuclear development. One of the critical ways the program achieves this objective is through working with partners to increase the effectiveness of the State System of Accountancy for and Control of Nuclear Materials (SSAC) - the essential elements of national, regulatory and facility safeguards competencies that work as a system to provide the International Atomic Energy Agency (IAEA) and the world the full assurance of the state's adherence to its safeguards agreements. INSEP provides assistance in developing a state's SSAC in a number of areas, from developing national legislation governing the possession and use of nuclear material to working with nuclear facility operators to developing good practices in waste management. INSEP has collaborated with foreign partners in peaceful nuclear applications for over two decades, but recently, it has focused its efforts on strengthening SSACs due to the growth of nuclear power worldwide, particularly in countries with limited nuclear infrastructures. This new area of focus has prompted INSEP to develop a model of SSAC competencies that will serve not only as a structure for its engagement with partner states, but also as a means to facilitate coordination with other states that provide training and assistance, and as a mechanism for evaluating the effectiveness of its work in reaching its intended objectives. While this model uses as its starting point the requirements on a State that are presented in the Comprehensive Safeguards Agreement and the Additional Protocol, it is not, in itself, a requirements document or guidance for implementing requirements. It is rather an analysis of what capabilities will be needed in a State to be able to meet requirements and to build confidence in the State System. Viewed from this perspective, the model can be thought of as a quality assurance tool that assists states in ensuring that the outputs of their State System (the tangible 'goods' that are provided to the International Atomic Energy Agency under the State's agreements) are of high quality. As such, this tool is for the internal use of a State System that wishes to assess and improve its capacity. It is not intended for comparison or outside evaluation. In addition to providing a self-assessment tool, INSEP expects this model to be useful in several other ways: it will inform the approach that INSEP uses in bilateral consultations to identify areas where INSEP outreach and training may be of value, and it will provide a structure for its training curriculum. It will help INSEP to evaluate the effectiveness of its outreach - where there are gaps in the training provided, and whether the training that is provided meets its stated objectives. Finally, it will provide a framework for coordinating with the IAEA and other member states in the 'harmonization' efforts currently underway to align the outreach efforts of states that provide safeguards training. This paper describes the process of evaluation that INSEP is developing. It looks at the expected usefulness of the metrics for conducting self-assessments and joint assessments and enabling partners to identify training needs. The paper begins with a description of various performance requirements that define what must be done at the state and facility level to implement effective and efficient international safeguards. Next, technical performance measures are discussed, that define how well a state and its facilities are fulfilling these requirements. Then a functional analysis is conducted to align the technical requirements with competencies and determine who should carry out the various activities necessary to fulfill the performance requirements. Finally, the paper concludes with a discussion about SEP's approach in applying the metrics to its outreach activities intended to help countries to implement high-functioning SSACs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel utilization effects on system efficiency in solid oxide fuel cell gas turbine hybrid systems

Here, a computational analysis was conducted to optimize the design of a solid oxide fuel cell - gas turbine hybrid power generator, focusing on the impact that fuel utilization within the fuel cell has on system efficiency and installed costs. This is the first ever design-study considering the effect of fuel utilization on performance, as well as on the optimum power split. This hybrid system attained high electric generation efficiencies (>70%) over a wide range of operating conditions (60% < fuel utilization < 90%) while the fuel cell stack size decreased in proportion to decreasing the fuel utilization. A one-dimensional fuel cell model was used to simulate the fuel cell while GateCycle® was used to simulate the performance of the associated recuperated turbine and various subsystems necessary for thermal management. For each test case, the size of the solid oxide fuel cell, gas turbine, and recuperator, as well as the fuel and air flow rates, hot-air bypass set point, and heat exchange effectiveness in the solid oxide fuel cell manifold were varied to obtain 550 MWe output. In addition, anode recycle, turbomachinery efficiency, and various thermal management options were tested. The maximum system efficiency (75.6%) was attained for the single-pass solid oxide fuel cell with highly efficient turbomachinery when the solid oxide fuel cell used 80% of the incoming fuel. Efficiency was essentially flat from 75% fuel utilization through 85% fuel utilization. Employing anode recycle starting at 65% resulted in roughly 1 percentage point efficiency decrease for each percent increase in fuel utilization. For minimized solid oxide fuel cell degradation, a near 50:50 power split case was studied resulting in 68.6% efficiency and the solid oxide fuel cell using 55% of the incoming fuel. Because of shifting half of the power generation to the gas turbine, the size of the fuel cell stack was reduced by 25% as compared to that at maximum efficiency (80% fuel utilization).

42 ENGINEERING↗

Advance reservation access control using software-defined networking and tokens

Advance reservation systems allow users to reserve dedicated bandwidth connection resources from advanced high-speed networks. A common use case for such systems is data transfers in distributed science environments in which a user wants exclusive access to the reservation. However, current advance network reservation methods cannot ensure exclusive access of a network reservation to the specific flow for which the user made the reservation. We present here a novel network architecture that addresses this limitation and ensures that a reservation is used only by the intended flow. We achieve this by leveraging software-defined networking (SDN) and token-based authorization. We use SDN to orchestrate and automate the reservation of networking resources, end-to-end and across multiple administrative domains, and tokens to create a strong binding between the user or application that requested the reservation and the flows provisioned by SDN. We conducted experiments on the ESNet 100G SDN testbed, and demonstrated that our system effectively protects authorized flows from competing traffic in the network.

admission control↗

Improving Sensitivity in the NNSS COMPASS Model

The Comprehensive Analysis of Safeguards Strategies model, COMPASS, was initially implemented with the goal of eliminating functions and requirements that did not contribute to the MC&A program at the particular site. The model sub-elements were revised several times through additions and deletions as the process was better understood. Contributions and ratings were developed and implemented. Because of the original intent, the process left the contribution factors closely grouped toward the top of the range. The effect of this is a flat sensitivity; a change in any element and sub-element affected the system effectiveness to the same degree no matter which one changed. This paper describes a method for determining element and sub-element contributions so that changes in element effectiveness are more accurately reflected in the overall system effectiveness.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Controlling saturation to improve per- and polyfluoroalkyl substance (PFAS) removal in biochar-amended stormwater bioretention systems

Black carbon-amended bioretention systems are an increasingly popular strategy for the removal of organic contaminants, including poly- and perfluoroalkyl substances (PFASs) and other trace organic contaminants (TOrCs), from urban stormwater. Many PFASs preferentially accumulate at the air–water interface, but detention time requirements for stormwater bioretention systems typically result in full saturation of the bioretention systems, effectively removing their air–water interfaces. This study assessed the effect of bioretention system saturation on removal of PFASs, metals, and hydrophilic TOrCs. A field-aged mixture of 40% v/v sand, 30% v/v zeolite, and 30% v/v biochar was packed into columns which were operated with hydraulic controls to remain unsaturated or fully saturated throughout the duration of the experiment. Twenty-four storm events sized to a 95th percentile storm at a California, United States military site were simulated using synthetic stormwater fortified with aqueous film forming foam-derived PFASs, TOrCs, and metals to mimic real-world conditions. Unsaturated conditions outperformed saturated conditions for removal of all PFASs analyzed. A simulated inadvertent system perturbation (i.e. flooding event) in the unsaturated columns did not result in significantly greater mobilization of PFAS mass, suggesting that more sorption to the biochar occurred as a result of the transient retention of PFASs at the air–water interface reducing kinetic sorption limitations. Overall, maintaining unsaturated conditions in a biofilter may extend the sorptive filter lifetime for PFASs by up to 83%. The results have implications for bioretention system application and design for PFAS removal in contaminated catchment areas.

13 HYDRO ENERGY↗

Design, Synthesis and Study of Multi-Component and Integrated Systems for Light-Driven Hydrogen Generation (Final Technical Report 2006-2009)

The research focused on fundamental problems in the conversion of light to stored chemical energy. Specifically, work was completed on the design, synthesis and study of multi-component super- and supramolecular systems for photoinduced charge separation, one of the key steps in artificial photosynthesis, and on the use of these and related systems for the photochemical generation of H 2 from water. At the center of these systems are chromophores comprised of square planar coordinated Pt(II) ions with arylacetylide and either diimine or terpyridyl ligands. Previous work had shown that the chromophores are photoluminescent in fluid solution with long-lived metal-to-ligand charge transfer ( 3 MLCT) excited states that are necessarily directional. An advance which set the stage for a number of proposed studies was the light-driven production of hydrogen from water using a Pt(terpyridyl)(arylacetylide)+ chromophore and a sacrificial electron donor. The reaction is catalytic and appears to rival previously reported ruthenium bipyridyl systems in terms of H 2 production. Variation of system components and mechanistic studies were conducted to understand better the individual steps in the overall process and how to improve its efficiency. Success with light driven H 2 generation was employed as a key probe as new systems were constructed consisting of triads for photoinduced charge separation placed in close proximity to the H 2 generating catalyst - a Pt colloid - through direct linkage or supramolecular interactions with the polymer used to stabilize the colloid. In order to prepare new donor-chromophore-acceptor (D-C-A) triads and associated D-C and C-A dyads, new ligands were synthesized having functional groups for different coupling reactions such as simple amide formation and Pd-catalyzed coupling. In these systems, the donor was attached to the arylacetylide ligands and the acceptor was linked to the diimine or terpyridyl chelate. Research under the contract proved successful in the development of synthetic methodologies to make multi-component systems designed so as to maintain electronic communication between components held in a defined spatial arrangement. Systems effective for light driven H 2 generation were examined by photophysical methods including transient absorption spectroscopy to observe charge-separated states and chart their dynamics. Quantum yields for hydrogen production were also measured. Additional studies examined the effectiveness of these systems for H 2 generation and involved the development of new catalysts and systems based thereon. From these studies, a better understanding of initial steps in the light driven generation of hydrogen were obtained.

08 HYDROGEN↗

Nantucket Island Energy Storage System Assessment

This report evaluates the economic benefits, distribution system effects, and control system requirements associated with the deployment of a combustion turbine generator and a 6 MW / 8 MWh lithium-ion Tesla battery system deployed on Nantucket Island, MA.

25 ENERGY STORAGE↗