Search NASA⌕ Search

SEARCH · Search NASA

Results for “TERMINAL GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

General aviation single pilot IFR autopilot study

Five levels of autopilot complexity were flown in a single engine IFR simulation for several different IFR terminal operations. A comparison was made of the five levels of complexity ranging from no autopilot to a fully coupled lateral and vertical guidance mode to determine the relative benefits versus complexity/cost of state-of-the-art autopilot capability in the IFR terminal area. Of the five levels tested, the heading select mode made the largest relative difference in decreasing workload and simplifying the approach task. It was also found that the largest number of blunders was detected with the most highly automated mode. The data also showed that, regardless of the autopilot mode, performance during an IFR approach was highly dependent on the type of approach being flown. These results indicate that automation can be useful when making IFR approaches in a high workload environment, but also that some disturbing trends are associated with some of the higher levels of automation found in state-of-the-art autopilots.

Bergeron, H. P.↗
NASA NTRS1991

Personnel launch system autoland development study

The Personnel Launch System (PLS) Autoland Development Study focused on development of the guidance and control system for the approach and landing (A/L) phase and the terminal area energy management (TAEM) phase. In the A/L phase, a straight-in trajectory profile was developed with an initial high glide slope, a pull-up and flare to lower glide slope, and the final flare touchdown. The TAEM system consisted of using a heading alignment cone spiral profile. The PLS autopilot was developed using integral LQG design techniques. The guidance and control design was verified using a nonlinear 6 DOF simulation. Simulation results demonstrated accurate steering during the TAEM phase and adequate autoland performance in the presence of wind turbulence and wind shear.

Bossi, J. A.↗
NASA NTRS1974

Navigation and guidance requirements for commercial VTOL operations

The NASA Langley Research Center (LaRC) has undertaken a research program to develop the navigation, guidance, control, and flight management technology base needed by Government and industry in establishing systems design concepts and operating procedures for VTOL short-haul transportation systems in the 1980s time period. The VALT (VTOL Automatic Landing Technology) Program encompasses the investigation of operating systems and piloting techniques associated with VTOL operations under all-weather conditions from downtown vertiports; the definition of terminal air traffic and airspace requirements; and the development of avionics including navigation, guidance, controls, and displays for automated takeoff, cruise, and landing operations. The program includes requirements analyses, design studies, systems development, ground simulation, and flight validation efforts.

Hoffman, W. C.↗
NASA NTRS1980

Single pilot IFR autopilot complexity/benefit tradeoff study

Five levels of autopilot complexity were flown in a single engine IFR simulation for several different IFR terminal operations. A comparison was made of the five levels of complexity ranging from no-autopilot to a fully coupled lateral and vertical guidance mode to determine the relative benefits vs. complexity/cost of state-of-the-art autopilot capability in the IFR terminal area. For the levels of progression tested, the heading select mode made the largest difference in decreasing workload and simplifying the approach task. It was also found that the largest number of blunders was detected with the most fully automated mode. The data also showed that, regardless of the autopilot mode, performance during an IFR approach was highly dependent on the type of approach being flown. These results indicate that some level of automation is desirable when making IFR approaches in a high workload environment, but also that some disturbing trends are associated with the higher levels of automation.

Bergeron, H. P.↗
NASA NTRS1975

Video Guidance, Landing, and Imaging system (VGLIS) for space missions

The feasibility of an autonomous video guidance system that is capable of observing a planetary surface during terminal descent and selecting the most acceptable landing site was demonstrated. The system was breadboarded and "flown" on a physical simulator consisting of a control panel and monitor, a dynamic simulator, and a PDP-9 computer. The breadboard VGLIS consisted of an image dissector camera and the appropriate processing logic. Results are reported.

Schappell, R. T.↗
NASA NTRS1990

Software requirements: Guidance and control software development specification

The software requirements for an implementation of Guidance and Control Software (GCS) are specified. The purpose of the GCS is to provide guidance and engine control to a planetary landing vehicle during its terminal descent onto a planetary surface and to communicate sensory information about that vehicle and its descent to some receiving device. The specification was developed using the structured analysis for real time system specification methodology by Hatley and Pirbhai and was based on a simulation program used to study the probability of success of the 1976 Viking Lander missions to Mars. Three versions of GCS are being generated for use in software error studies.

Withers, B. Edward↗
NASA NTRSDate not supplied

Flight Performance Comparison of Bank-Angle Steering and Alpha-Beta Steering for Mars Entry Systems

Alpha-beta steering is an alternative hypersonic steering scheme to state-of-the-art bank-angle steering systems for guided Mars entry vehicles. This study uses opti- mal control to generate steering commands for a large robotic Mars entry vehicle using either a bank-angle or alpha-beta steering system to provide a more equal comparison of these two hypersonic steering options, not dependent on guidance design or the inclusion of conventional bank reversals. Objectives maximizing terminal altitude or minimizing control effort, while also reaching a desired target point are considered for both steering options in nominal and dispersed cases. Re- sults indicate both steering options have similar performance, although alpha-beta steering is shown to have improved targeting performance, particularly for the lati- tude/crossrange. Alpha-beta steering is also able to reach higher terminal altitudes by about 0.25 km, relative to the vehicle using bank-angle steering. The difference in altitude maximization capability grows as the allowable vehicle rates decrease.

Daniel L Engel↗
NASA NTRS2007

Crew Procedures for Continuous Descent Arrivals Using Conventional Guidance

This paper presents results from a simulation study which investigated the use of Continuous Descent Arrival (CDA) procedures for conducting a descent through a busy terminal area, using conventional transport-category automation. This research was part of the Low Noise Flight Procedures (LNFP) element within the Quiet Aircraft Technology (QAT) Project, that addressed development of flight guidance, and supporting pilot and Air Traffic Control (ATC) procedures for low noise operations. The procedures and chart were designed to be easy to understand, and to make it easy for the crew to make changes via the Flight Management Computer Control-Display Unit (FMC-CDU) to accommodate changes from ATC. The test runs were intended to represent situations typical of what exists in many of today's terminal areas, including interruptions to the descent in the form of clearances issued by ATC.

Oseguera-Lohr, Rosa M.↗
NASA NTRS1981

Operational considerations in utilization of microwave landing system approach and landing guidance

The characteristics of microwave landing system (MLS) equipment are reviewed and the flight performance of the terminal configured vehicle B-737 airplane during nearly five years of flight experience with MLS is summarized. Most of these flights involved curved, descending flight paths with automatic landings and final approaches as short as 0.44 n. mi. Possible uses to solve noise abatement problems with MLS equipment of varying degrees of complexity are discussed. It is concluded that altitude derived from MLS is superior to other sources near the airport traffic pattern.

White, W. F.↗
NASA NTRS1971

Digital autopilots: Design considerations and simulator evaluations

The development of a digital autopilot program for a transport aircraft and the evaluation of that system's performance on a transport aircraft simulator is discussed. The digital autopilot includes three axis attitude stabilization, automatic throttle control and flight path guidance functions with emphasis on the mode progression from descent into the terminal area through automatic landing. The study effort involved a sequence of tasks starting with the definition of detailed system block diagrams of control laws followed by a flow charting and programming phase and concluding with performance verification using the transport aircraft simulation. The autopilot control laws were programmed in FORTRAN 4 in order to isolate the design process from requirements peculiar to an individual computer.

Osder, S.↗
NASA NTRS1975

Minimum-fuel rocket trajectories involving intermediate-thrust arcs

The optimal trajectories in the neighborhood of an optimal intermediate-thrust arc are investigated for the minimum-fuel orbit rendezvous problem with fixed specific impulse. Since such an arc is singular, the thrust acceleration magnitude being the singular control component, a second-variation analysis leads to the identification of a field of neighboring, singular arcs in a state space of dimension four rather than six, provided that a suitable Jacobi condition is met. A given neighboring initial six-dimensional state vector does not generally lie on a neighboring singular arc, and junction onto the appropriate singular arc must be accomplished by a short period of strong variations in the acceleration. The neighboring singular arc meets the final condition in 4 dimensions, rather than 6 dimensions, and rendezvous must be completed by another, terminal short period of strong variations in the acceleration. Implications for midcourse guidance near a singular arc are discussed.

Breakwell, J. V.↗
NASA NTRS2002

An Automated Method to Compute Orbital Re-Entry Trajectories with Heating Constraints

Determining how to properly manipulate the controls of a re-entering re-usable launch vehicle (RLV) so that it is able to safely return to Earth and land involves the solution of a two-point boundary value problem (TPBVP). This problem, which can be quite difficult, is traditionally solved on the ground prior to flight. If necessary, a nearly unlimited amount of time is available to find the "best" solution using a variety of trajectory design and optimization tools. The role of entry guidance during flight is to follow the pre-determined reference solution while correcting for any errors encountered along the way. This guidance method is both highly reliable and very efficient in terms of onboard computer resources. There is a growing interest in a style of entry guidance that places the responsibility of solving the TPBVP in the actual entry guidance flight software. Here there is very limited computer time. The powerful, but finicky, mathematical tools used by trajectory designers on the ground cannot in general be made to do the job. Nonconvergence or slow convergence can result in disaster. The challenges of designing such an algorithm are numerous and difficult. Yet the payoff (in the form of decreased operational costs and increased safety) can be substantial. This paper presents an algorithm that incorporates features of both types of guidance strategies. It takes an initial RLV orbital re-entry state and finds a trajectory that will safely transport the vehicle to a Terminal Area Energy Management (TAEM) region. During actual flight, the computed trajectory is used as the reference to be flown by a more traditional guidance method.

Zimmerman, Curtis↗
NASA NTRS2008

G-Guidance Interface Design for Small Body Mission Simulation

The G-Guidance software implements a guidance and control (G and C) algorithm for small-body, autonomous proximity operations, developed under the Small Body GN and C task at JPL. The software is written in Matlab and interfaces with G-OPT, a JPL-developed optimization package written in C that provides G-Guidance with guaranteed convergence to a solution in a finite computation time with a prescribed accuracy. The resulting program is computationally efficient and is a prototype of an onboard, real-time algorithm for autonomous guidance and control. Two thruster firing schemes are available in G-Guidance, allowing tailoring of the software for specific mission maneuvers. For example, descent, landing, or rendezvous benefit from a thruster firing at the maneuver termination to mitigate velocity errors. Conversely, ascent or separation maneuvers benefit from an immediate firing to avoid potential drift toward a second body. The guidance portion of this software explicitly enforces user-defined control constraints and thruster silence times while minimizing total fuel usage. This program is currently specialized to small-body proximity operations, but the underlying method can be generalized to other applications.

Acikmese, Behcet↗
NASA NTRSDate not supplied

Assured Vehicle Automation 1 Sim - Results Outbrief

In early 2022, the Human Autonomy Teaming Lab (NASA Ames Research Center) conducted a manned, human-in-the-loop (HITL) simulation. This part-task HITL began the lab’s Hazard Perception and Avoidance (HPA) technical work under NASA’s Advanced Air Mobility (AAM), Automated Flight and Contingency Management (AFCM) Sub-Project. The results of that sim guided the objectives of the current study, which were to examine pilots’ use of the Airborne Collision Avoidance System (ACAS) rotorcraft variant (Xr) v2 in multiple phases of flight with two separate Xr Modes, fully leverage Xr v2 features (e.g., use radar altimeter data to inform low altitude Resolution Advisory [RA] behavior, utilize the ability to designate “terminal-area intruders,” and display airspeed-based Detect and Avoid [DAA] guidance), emulate a “Traffic Advisory” (TA), and present Xr in a higher-fidelity environment. Therefore, this study was conducted in the Vertical Motion Simulator, and the variables included Phase of Flight (En-route, Hover, and Approach) as well as ACAS Xr Mode (TA/RA and DAA). The data collected included response times, losses of well clear, and maneuver sizes and durations as well as subjective ratings like acceptability and usability. Additional details and future anticipations are also discussed.

air taxis↗
NASA NTRS1992

Shuttle entry guidance revisited

The Shuttle entry guidance concept is reviewed which is aimed at tracking a reference drag trajectory that leads to the specified range and velocity for the initiation of the terminal energy management phase. An approximate method of constructing the domain of attraction is proposed, and its validity is ascertained by simulation. An alternative guidance law yielding global exponential tracking in the absence of control saturation is derived using a feedback linearization method. It is noted that the alternative guidance law does not improve on the stability and performance of the current guidance law, for the operating domain and control capability of the Shuttle. It is suggested that the new guidance law with a larger operating domain and increased lift-to-drag capability would be superior.

Mease, Kenneth D.↗
NASA NTRS1980

MCC level C formulation requirements. Shuttle TAEM guidance and flight control, STS-1 baseline

The TAEM guidance and body rotational dynamics models required for the MCC simulation of the TAEM mission phase are defined. This simulation begins at the end of the entry phase and terminates at TAEM autoland interface. The logic presented is the required configuration for the first shuttle orbital flight (STS-1). The TAEM guidance is simulated in detail. The rotational dynamics simulation is a simplified model that assumes that the commanded rotational rates can be achieved in the integration interval. Thus, the rotational dynamics simulation is essentially a simulation of the autopilot commanded rates and integration of these rates to determine orbiter attitude. The rotational dynamics simulation also includes a simulation of the speedbrake deflection. The body flap and elevon deflections are computed in the orbiter aerodynamic simulation.

Carman, G. L.↗