Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

SOLID SOLUTION EFFECTS ON THE THERMAL PROPERTIES IN THE MgAl2O4-MgGa2O4

Solid solution eects on thermal conductivity within the MgO-Al2O3-Ga2O3 system were studied. Samples with systematically varied additions of MgGa2O4 to MgAl2O4 were prepared and the laser ash technique was used to determine thermal diusivity at temperatures between 200C and 1300C. Heat capacity as a function of temperature from room temperature to 800C was also determined using dierential scanning calorimetry. Solid solution in the MgAl2O4-MgGa2O4 system decreases the thermal conductivity up to 1000C. At 200C thermal conductivity decreased 24% with a 5 mol% addition of MgGa2O4 to the system. At 1000C the thermal conductivity decreased 13% with a 5 mol% addition. Steady state calculations showed a 12.5% decrease in heat ux with 5 mol% MgGa2O4 considered across a 12 inch thickness.

Spinel↗

Effects of Molecular Weight on poly( -pentadecalactone) Mechanical and Thermal Properties

A series of poly({omega}-pentadecalactone) (PPDL) samples, synthesized by lipase catalysis, were prepared by systematic variation of reaction time and water content. These samples possessed weight-average molecular weights (M{sub w}), determined by multi-angle laser light scattering (MALLS), from 2.5 x 10{sup 4} to 48.1 x 10{sup 4}. Cold-drawing tensile tests at room temperature of PPDL samples with M{sub W} between 4.5 x 10{sup 4} and 8.1 x 10{sup 4} showed a brittle-to-ductile transition. For PPDL with M{sub W} of 8.1 x 10{sup 4}, inter-fibrillar slippage dominates during deformation until fracture. Increasing M{sub W} above 18.9 x 10{sup 4} resulted in enhanced entanglement network strength and strain-hardening. The high M{sub W} samples also exhibited tough properties with elongation at break about 650% and tensile strength about 60.8 MPa, comparable to linear high density polyethylene (HDPE). Relationships among molecular weight, Young's modulus, stress, strain at yield, melting and crystallization enthalpy (by differential scanning calorimetry, DSC) and crystallinity (from wide-angle X-ray diffraction, WAXD) were correlated for PPDL samples. Similarities and differences of linear HDPE and PPDL molecular weight dependence on their mechanical and thermal properties were also compared.

59 BASIC BIOLOGICAL SCIENCES↗

Anionic ordering and thermal properties of FeF 3 ·3H 2 O

In this study, iron fluoride tri-hydrate can be used to prepare iron hydroxyfluoride with the Hexagonal-Tungsten-Bronze (HTB) type structure, a potential cathode material for batteries. To understand this phase transformation, a structural description of β-FeF 3 ·3H 2 O is first performed by means of DFT calculations and Mössbauer spectroscopy. The structure of this compound consists of infinite chains of [FeF 6 ]n and [FeF 2 (H2O) 4 ] n . The decomposition of FeF 3 ·3H 2 O induces a collapse and condensation of these chains, which lead to the stabilization, under specific conditions, of a hydroxyfluoride network FeF 3-x (OH) x with the HTB structure. The release of H 2 O and HF was monitored by thermal analysis and physical characterizations during the decomposition of FeF 3 ·3H 2 O. An average distribution of FeF 4 (OH) 2 distorted octahedra in HTB-FeF 3-x (OH) x was obtained subsequent to the thermal hydrolysis/olation of equatorial anionic positions involving F- and H 2 O. This study provides a clear understanding of the structure and thermal properties of FeF 3 ·3H 2 O, a material that can potentially bridge the recycling of pickling sludge from the steel industry by preparing battery electrodes.

25 ENERGY STORAGE↗

Electrical, Structural, and Thermal Properties of Ferrite/Superconductor (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}) Nanocomposite Materials

The superconductor YBa{sub 2}Cu{sub 3}O{sub 7-δ} (Y123) is prepared by the solid-state route, while the nanosized Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (Ni-Zn ferrite) is synthesized via citric acid sol-gel technique. The composite material of the type (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}, where x = 0.00, 0.03, 0.10, and 0.50 wt%, is prepared by a modified solid-state method to study the effect of doping Ni-Zn nanosized ferrite on the superconducting, structure, and thermal properties of Y123. The prepared samples show Meissner effect which confirmed the presence of superconducting phase at liquid nitrogen temperature (77 K). The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion of X-ray (EDX), infra-red (IR) spectroscopy, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), DC resistance by four-probe, and critical current density measurements. It was found that by increasing Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles in the Y123 compound, the unit cell volume of the orthorhombic phase decreases, but the transition temperature T{sub c} and critical current density J{sub c} decrease for low doping (x = 0.03 wt%) then increase (x = 0.10 and 0.50 wt%) for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} doped in Y123. The transport properties of the (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7}-{sub δ} composite as electrical resistance R, T{sub c}, and J{sub c} are interpreted according to Bean’s critical state model and charge-vortex interaction combined with vortex pinning in Y123 high-T{sub c} mixed-state type-II superconductor. Highlights: The critical current density J{sub c} decreased for low doping of nanosized Ni-Zn ferrite into Y123 with ratio of 0.03 wt% and increased by increasing doping ratio to 0.50 wt%. The physical properties are improved by the coexistence of the superconductor Y123 and nanosized Ni-Zn ferrites in nanocomposite material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

First-principles calculations of lattice dynamics and thermal properties of polar solids

Although the theory of lattice dynamics was established six decades ago, its accurate implementation for polar solids using the direct (or supercell, small displacement, frozen phonon) approach within the framework of density-function-theory-based first-principles calculations had been a challenge until recently. It arises from the fact that the vibration-induced polarization breaks the lattice periodicity, whereas periodic boundary conditions are required by typical first-principles calculations, leading to an artificial macroscopic electric field. In conclusion, the article reviews a mixed-space approach to treating the interactions between lattice vibration and polarization, its applications to accurately predicting the phonon and associated thermal properties, and its implementations in a number of existing phonon codes.

36 MATERIALS SCIENCE↗

Flux Growth, Thermal Properties, and Luminescence Spectra of (Er,Yb,Lu)Al{sub 3}(BO{sub 3}){sub 4} Solid Solutions

We have studied phase relations in the pseudoquaternary system LuAl{sub 3}(BO{sub 3}){sub 4}–(K{sub 2}Mo{sub 3}O{sub 10}–Al{sub 2}O{sub 3}–B{sub 2}O{sub 3}) in the temperature range 1130 to 900°C. The phase relations were represented in graphical form, as a projection of the formation of solid phases in this range onto the composition triangle at 900°C. Optimal results in terms of high-temperature solution growth have been obtained at 25 wt % LuAl{sub 3}(BO{sub 3}){sub 4} in the growth charge. Undoped and erbium–ytterbium codoped LuAl{sub 3}(BO{sub 3}){sub 4} (LuAB) single crystals have been grown from high-temperature solutions on “pointlike” seeds. The (Er,Yb):LuAB crystals are similar in thermal properties and luminescence spectra to (Er,Yb):YAl{sub 3}(BO{sub 3}){sub 4} and (Er,Yb):GdAl{sub 3}(BO{sub 3}){sub 4} crystals and can be used in diode-pumped lasers operating in the nominally eye-safe spectral region 1.5–1.6 μm.

36 MATERIALS SCIENCE↗

High-Resolution Measurement of Soil Thermal Properties and Moisture Content Using a Novel Heated Fiber Optics Approach

Hydrological parameters are scale dependent. Efficient monitoring techniques capable of measuring hydrological parameters, such as soil moisture content (θ), over a wide range of spatial scales are essential for understanding the complexity of water and energy movement across the landscape. Techniques to measure θ over spatial scales in the range from centimeters to thousands of meters, however, are sorely lacking. Recent improvements in the distributed temperature sensing (DTS) technology supported the development of novel techniques to fill that gap. However, improvements in the accuracy and applicability of DTS techniques are still needed. This study investigates the possibility of improving the accuracy of the fiber optics dual-probe heat-pulse (FO-DPHP) DTS technique by using a new design to maintain the spacing between the FO-DPHP probes and by introducing a novel data interpretation approach. The accuracy of the novel FO-DPHP design was tested at different θ in a sand column experiment. The FO-DPHP measurements obtained using traditional and novel data interpretation approaches were compared against independent measurements from several calibrated soil water content (EC5) sensors. Monte-Carlo analyses were also performed to assess the impact of DTS measurement errors on the accuracy achieved using the data interpretation approaches. The novel design and data interpretation approach allowed for accurate measurements of soil thermal properties and θ without the need to perform a hard-to-achieve soil-specific calibration. Measured θ had mean errors and standard deviations <0.03 and <0.01 m 3 m -3 , respectively, for moisture conditions ranging from dry to near saturation. The standard deviation in the measured heat capacity was <0.01 MJ m -3 K -1 .

42 ENGINEERING↗

The effect of side-chain branch position on the thermal properties of poly(3-alkylthiophenes)

Thermomechanical properties of conjugated polymers (CPs) are greatly influenced by both their microstructures and backbone dynamics. In the present work, to explore the effect of the side-chain branch position on the backbone's mobility and molecular packing structure, four poly (3-alkylthiophene-2,5-diyl) derivatives (P3ATs) with different side chains, either branched or linear, were synthesized by a quasi-living Kumada catalyst transfer polymerization (KCTP) method. The side-chain branch position greatly influences the glass transition temperature ( T g ) of the backbone of P3ATs as well as the melting temperature ( T m ), as measured by dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) respectively. Placing the branching point closer to the conjugated backbone leads to increased backbone T g and T m . Also, according to grazing incidence wide-angle X-ray scattering (GIWAXS) results, branching closer to the backbone causes tighter packing in the side-chain direction. The tighter packing along the side-chain direction coresponds with the higher T m , which decreases the free volume of the polymer system and subsequently increases the T g at the same time. This work offers the first in-depth understanding of branch point influences on the thermal properties of poly(3-alkylthiophenes). It would provide guidance to the future development of side-chain engineering on next-generation CPs with desirable thermomechnical properties for stretchable and wearable electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design, synthesis, and characterization of vinyl-addition polynorbornenes with tunable thermal properties

Unfunctionalized vinyl-addition polynorbornene (VAPNB) possesses many outstanding properties such as high thermal, chemical, and oxidative stability. These features make VAPNB a promising candidate for many engineering applications. However, VAPNB has a small service window between its glass transition temperature (T g ) and decomposition temperature (T d ), and it cannot be readily processed in a melt state. In this work, we demonstrate that the service window of VAPNBs can be tailored through the use of norbornene monomers bearing alkyl, aryl, and aryl ether substituents. The vinyl addition homopolymerization and copolymerization of these functionalized norbornyl-based monomers yielded VAPNBs with high T' g s (>150 °C) and large service windows (T d –T g > 100 °C), which are comparable to other commercial engineering thermoplastics. To further establish the feasibility of melt processing, a functionalized VAPNB material with T g = 209 °C and a service window of 170 °C was successfully extruded and molded into bars. Subsequent characterization of the bars by dynamic mechanical analysis (DMA), nuclear magnetic resonance spectroscopy (NMR), and gel permeation chromatography (GPC) revealed only minor signs of polymer degradation. Furthermore, these studies suggest that substituted VAPNBs could be developed into a new class of engineering thermoplastics that is compatible with workhorse melt processing techniques such as extrusion and injection molding, as well as emerging techniques such as extrusion-based 3D printing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sample shape and boundary dependence of measured transverse thermal properties

In spite of increased interest in thermal Hall measurements for the analysis of insulating quantum materials, there remains large uncertainty in such measurements due to contact misalignment. In this paper, we propose that sample geometry and uncertain boundary conditions provide an additional source of uncertainty in the measurement of $D_{xy}$ or $κ_{xy}$. By running simple simulations in an open source finite-element solver, we demonstrate that measured $D_{xy}$ can be changed by a non-negligible fraction in samples with similar width and length. This geometric corrective factor depends on the distinction between a uniform heat flow and constant temperature boundary couplings to a bath. Sample geometry and boundary conditions can be accounted for through simulation or by using rectangular samples to make thermal Hall measurements more reliable and reproducible. Finally, we detail a contactless optical method for measuring $D_{xy}$ based on an existing photothermal microscope technique. This method is insensitive to the longitudinal diffusivity pollution caused by contact misalignment.

36 MATERIALS SCIENCE↗

Investigating the nanostructure and thermal properties of chiral poly(amide-imide)/Al{sub 2}O{sub 3} compatibilized with 3-aminopropyltriethoxysilane

Graphical abstract: - Highlights: • Chiral polymer with different functional groups was prepared in green route. • The surface of Al{sub 2}O{sub 3}-NPs was treated by KH550 as a silane coupling agent. • NCs of poly(amide-imide) and Al{sub 2}O{sub 3} were synthesized by ultrasonic irradiation. • TEM results show good dispersion of Al{sub 2}O{sub 3}-NPs in the poly(amide-imide) matrix. • The thermal and mechanical properties of the hybrid materials were improved. - Abstract: Novel chiral poly(amide-imide) (PAI)/Al{sub 2}O{sub 3} nanocomposites were prepared via incorporating surface modified Al{sub 2}O{sub 3} nanoparticles into polymer matrices for the first time. In the process of preparing the nanocomposites, severe aggregation of Al{sub 2}O{sub 3} nanoparticles could be reduced by surface modification and γ-aminopropyltriethoxysilane. The optically active PAI chains were formed from the polycondensation reaction of N,N′-(pyromellitoyl)-bis-phenylalanine diacid with 2-(3,5-diaminophenyl)-benzimidazole in green condition. The obtained polymer and inorganic metal oxide nanoparticles were used to prepare chiral PAI/Al{sub 2}O{sub 3} nanocomposites through ultrasonic irradiation. The resulting nanoparticle filled composites were also characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and thermogravimetric analysis (TGA) techniques. TGA thermographs confirmed that the heat stability of the prepared nanoparticle-reinforced composites was improved. Mechanical properties showed that the film containing 10 wt% of modified Al{sub 2}O{sub 3} had a tensile strength of the order of 83.6 MPa, relative to the 64.3 MPa of the pure PAI.

36 MATERIALS SCIENCE↗

Effect of metal ions (Sn and Zn) on the thermal property of akaganeite nanorods

Graphical abstract: Compared with β-FeOOH and Zn doped β-FeOOH, the thermal stability of tin doped β-FeOOH increases both in solution and air. Zn and Sn ions doping favor the formation of rod like shape β-FeOOH. Highlights: ► The addition of tin ions increases the thermal stability of β-FeOOH nanorods both in solution and air. ► Tin ions doped β-FeOOH nanorods show higher decomposition temperature (ΔT = 200 °C). ► The presence of tin and zinc ions is favor of the formation of rod like shape. -- Abstract: The electrical, optical, and adsorption properties of akaganeite (β-FeOOH) can be modified by doping or combining with variety of elements. We prepared metal ions (Sn, Zn) doped β-FeOOH using β-FeOOH nanorods as the precursor by the hydrothermal method and investigated the effect of metal ions (Sn, Zn) on the thermal property of β-FeOOH nanorods. The doping of metal ions (Sn, Zn) was confirmed by X-ray powder diffraction, energy dispersive spectroscopy, and atomic emission spectrometer analysis. Thermogravimetric analysis and differential thermal analysis showed that they have different thermal decomposition temperatures. β-FeOOH nanorods and Zn doped β-FeOOH nanorods were transformed into α-Fe{sub 2}O{sub 3} particles at 400 °C. While Sn doped β-FeOOH nanorods should be heated to higher temperature (600 °C). Sn doped β-FeOOH nanorods showed higher thermal stability due to the Sn ions binding with the framework of β-FeOOH. Both Sn and Zn ions doped β-FeOOH remained the rod like shape.

36 MATERIALS SCIENCE↗

Transducerless time domain reflectance measurement of semiconductor thermal properties

The dominant techniques for laser-based thermal measurement, time-domain thermoreflectance (TDTR) and frequency-domain thermoreflectance, generally require that samples be coated with a metal transducer layer. The properties of the transducer and its interface to the sample are then important to the interpretation of results, and heat conduction in the transducer layer can limit measurements of ultra-thin samples or in-plane conductivity. Here, we demonstrate the feasibility of measuring semiconductor samples using standard TDTR instrumentation, without the use of a metal transducer. A mathematical model accounting for non-zero laser penetration depth as well as both thermal and charge carrier effects is presented, and the ability of the model to describe and fit to experimental data for silicon and germanium samples is demonstrated. Though at this stage measurement uncertainties are larger than for traditional TDTR, we anticipate that the use of this technique will expand the range of samples that can be measured with existing TDTR setups.

36 MATERIALS SCIENCE↗

Quality Ranking System for Molten Salt Thermal Property Data

A simple ranking system for use with data and property values compiled in the Molten Salt Thermal Database-Thermophysical Properties (MSTDB-TP) is presented. The approach includes assessments of five features of data collection: the method used to measure the property value, calibration of devices used to make the measurements, the quantified uncertainty of the results, control of the environmental conditions, and determination of the salt composition. The verifiability of how the property value was determined is also assessed based on information provided or cited within the data set. The quality of each facet is ranked as High, Moderate, or Incomplete based on objective metrics. The overall quality of the dataset is ranked based on rankings of the five data features and the reported property value, with rankings of A and B indicating the data and property value are deemed suitable for quantitative use and U indicating uncertainties that restrict the recommended use to qualitative purposes. The system is suitable for assessing data already in the MSTDB-TP and screening new entries.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗