Search NASA⌕ Search

SEARCH · Search NASA

Results for “TURBINE BLADE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A general method for unsteady heat transfer on turbine blades

The development of a general method for calculating unsteady heat transfer on turbine blades is described. It is based on the numerical solution of the boundary-layer equations for laminar, transitional, and turbulent flows. A novel procedure has been developed to account for the movement of the stagnation point caused by blade-passing wakes and has been applied to the stagnation region of three model flows with results which confirm its validity for laminar flows. It has also been applied to an experimental arrangement in which the average Nusselt number has been reported for turbulent flows and the results show considerable promise.

Cebeci, Tuncer↗
NASA NTRS2004

Effects of Freestream Turbulence on Turbine Blade Heat Transfer

Experiments have shown that moderate turbulence levels can nearly double turbine blade stagnation region heat transfer. Data have also shown that heat transfer is strongly affected by the scale of turbulence as well as its level. In addition to the stagnation region, turbulence is often seen to increase pressure surface heat transfer. This is especially evident at low to moderate Reynolds numbers. Vane and rotor stagnation region, and vane pressure surface heat transfer augmentation is often seen in a pre-transition environment. Accurate predictions of transition and relaminarization are critical to accurately predicting blade surface heat transfer. An approach is described which incorporates the effects of both turbulence level and scale into a CFD analysis. The model is derived from experimental data for cylindrical and elliptical leadng edges. Results using this model are compared to experimental data for both vane and rotor geometries. The comparisons are made to illustrate that using a model which includes the effects of turbulence length scale improves agreement with data, and to illustrate where improvements in the modeling are needed.

Boyle, Robert J.↗
NASA NTRS2009

Alloy Design Challenge: Development of Low Density Superalloys for Turbine Blade Applications

New low density single crystal (LDS) alloys have been developed for turbine blade applications, which have the potential for significant improvements in the thrust to weight ratio over current production alloys. An innovative alloying strategy was identified to achieve high temperature creep resistance, alloy density reductions, microstructural stability, and cyclic oxidation resistance. The approach relies on the use of molybdenum (Mo) as a potent solid solution strengthener for the nickel (Ni)-base superalloy; Mo has a density much closer to Ni than other refractory elements, such as rhenium (Re) or tungsten (W). A host of testing and microstructural examinations was conducted on the superalloy single crystals, including creep rupture testing, microstructural stability, cyclic oxidation, and hot corrosion. The paper will provide an overview of the single crystal properties that were generated in this new superalloy design space. The paper will also demonstrate the feasibility of this innovative approach of low density single crystal superalloy design. It will be shown that the best LDS alloy possesses the best attributes of three generations of single crystal alloys: the low density of first-generation single crystal alloys, the excellent oxidation resistance of second-generation single crystal alloys, and a creep strength which exceeds that of second and third generation alloys.

MacKay, Rebecca A.↗
NASA NTRS1950

Comparison of outside-surface heat-transfer coefficients for cascades of turbine blades

A comparison of available results from heat-transfer investigations on cascades of turbine blades is presented using the Nusselt equation. The conventional correlation procedure is modified by defining the Reynolds number by the average of the velocities and the pressures around the blades. The correlation of the results from impulse blades was improved by using the Reynolds number defined by the average velocity and pressure. The final comparison indicated that several variables, which possibly influence heat transfer, should be investigated.

HEAT TRANSFER, CASCADES↗
NASA NTRS1996

The Effect of Wake Passing on Turbine Blade Film Cooling

The effect of upstream blade row wake passing on the showerhead film cooling performance of a downstream turbine blade has been investigated through a combination of experimental and computational studies. The experiments were performed in a steady-flow annular turbine cascade facility equipped with an upstream rotating row of cylindrical rods to produce a periodic wake field similar to that found in an actual turbine. Spanwise, chordwise, and temporal resolution of the blade surface temperature were achieved through the use of an array of nickel thin-film surface gauges covering one unit cell of showerhead film hole pattern. Film effectiveness and Nusselt number values were determined for a test matrix of various injectants, injectant blowing ratios, and wake Strouhal numbers. Results indicated a demonstratable reduction in film effectiveness with increasing Strouhal number, as well as the expected increase in film effectiveness with blowing ratio. An equation was developed to correlate the span-average film effectiveness data. The primary effect of wake unsteadiness was found to be correlated well by a chordwise-constant decrement of 0.094-St. Measurable spanwise film effectiveness variations were found near the showerhead region, but meaningful unsteady variations and downstream spanwise variations were not found. Nusselt numbers were less sensitive to wake and injection changes. Computations were performed using a three-dimensional turbulent Navier-Stokes code which was modified to model wake passing and film cooling. Unsteady computations were found to agree well with steady computations provided the proper time-average blowing ratio and pressure/suction surface flow split are matched. The remaining differences were isolated to be due to the enhanced mixing in the unsteady solution caused by the wake sweeping normally on the pressure surface. Steady computations were found to be in excellent agreement with experimental Nusselt numbers, but to overpredict experimental film effectiveness values. This is likely due to the inability to match actual hole exit velocity profiles and the absence of a credible turbulence model for film cooling.

Heidmann, James David↗
NASA NTRS1974

Rotating turbine blade pyrometer

Non-contacting pyrometer system optically measures surface temperature distribution on rotating turbine blade, comprising line-by-line scan via fiber optic probe. Each scan line output is converted to digital signals, temporarily stored in buffer memory, and then processed in minicomputer for display as temperature.

Buchele, D. R.↗
NASA NTRS1983

Properties of Nickel-Based Hydrogen-Turbine Blades

120 page report presents data on mechanical properties of cast nickelbased alloys for turbine blades operating in hydrogen and steam at high temperatures. Tests on alloys for hydrogen-burning engines of future are described.

Deluca, D. P.↗
NASA NTRS1992

Finite difference time domain modeling of steady state scattering from jet engines with moving turbine blades

The approach chosen to model steady state scattering from jet engines with moving turbine blades is based upon the Finite Difference Time Domain (FDTD) method. The FDTD method is a numerical electromagnetic program based upon the direct solution in the time domain of Maxwell's time dependent curl equations throughout a volume. One of the strengths of this method is the ability to model objects with complicated shape and/or material composition. General time domain functions may be used as source excitations. For example, a plane wave excitation may be specified as a pulse containing many frequencies and at any incidence angle to the scatterer. A best fit to the scatterer is accomplished using cubical cells in the standard cartesian implementation of the FDTD method. The material composition of the scatterer is determined by specifying its electrical properties at each cell on the scatterer. Thus, the FDTD method is a suitable choice for problems with complex geometries evaluated at multiple frequencies. It is assumed that the reader is familiar with the FDTD method.

Ryan, Deirdre A.↗
NASA NTRS1952

Experimental investigation of the heat-transfer characteristics of an air-cooled sintered porous turbine blade

The results of a heat-transfer investigation on a transpiration-cooled turbine blade are presented. The investigation was made on a static cascade.506::Declassified December 11, 1953. Blade-peripheral wall-temperature distributions were measured and compared with the temperature distribution on a convection-cooled blade. A correlation of the blade-wall temperatures obtained at various gas temperatures and gas weight flows was made on the basis of a temperature-difference ratio. Blade-wall temperatures calculated using an approximate theory for turbulent flow are compared with the measured blade-wall tempeartures.

Schafer, Louis J , Jr↗
NASA NTRS1957

Endurance Evaluation of Sintered, Porous, Strut-Supported Turbine Blades made by Federal-Mogul-Bower-Bearings, Incorporated, under Bureau of Aeronautics Contract NOas 55-124-C

Four strut-supported, transpiration-cooled turbine blades were investigated experimentally in a turbojet engine. The blade shells were fabricated by the mold-sintering method with spherical stainless-steel powder. Two blades were investigated in order to evolve suitable capping methods for the blade tip. Two other blades were used to evaluate the durability of the porous-shell material. The blades were investigated at a turbine-tip speed of 1305 feet per second, an average turbine-inlet temperature of about 1670 F, and at a porous-shell temperature limited to a maximum of approximately 1040 F.

Hickel, Robert O.↗
NASA NTRS1951

Two-dimensional Cascade Investigation of the Maximum Exit Tangential Velocity Component and Other Flow Conditions at the Exit of Several Turbine Blade Designs at Supercritical Pressure Ratios

The nature of the flow at the exit of a row of turbine blades for the range of conditions represented by four different blade configurations was evaluated by the conservation-of-momentum principle using static-pressure surveys and by analysis of Schlieren photographs of the flow. It was found that for blades of the type investigated, the maximum exit tangential-velocity component is a function of the blade geometry only and can be accurately predicted by the method of characteristics. A maximum value of exit velocity coefficient is obtained at a pressure ratio immediately below that required for maximum blade loading followed by a sharp drop after maximum blade loading occurs.

TURBINES - AXIAL FLOW↗
NASA NTRS1956

Methods for Measuring Temperatures of Thin-walled Gas-turbine Blades

The accuracy and durability of two means for measuring the metal temperature of gas-turbine blades were investigated experimentally in a turbojet engine. Cemented thermocouples that could be placed in walls as thin 0.010 inch and commercial temperature-indicating paints were evaluated at turbine-inlet temperatures up to about 1650 degrees F and for centrifugal forces equivalent to about 42,000 times gravity. The cemented thermocouples operated satisfactorily. The temperature-indicating paints were neither as accurate nor as durable as the cemented thermocouples.

Stepka, Francis S↗
NASA NTRS1976

Infrared pyrometer for high resolution surface temperature measurement on rotating turbine blades

A high resolution pyrometer was developed and used to obtain temperature profiles of rotating turbine blades at tip speeds up to 366 meters per second. Surface temperature variations from 920 to 1250 K can be measured and variations over distances of 0.05 cm can be resolved. Temperature profiles were obtained in near real time as hard copies from a computer display terminal. Temperatures measured with the prototype pyrometer and with thermocouples agreed to within 2 percent over the temperature range from 977 to 1144.

Uguccini, O. W.↗
NASA NTRS1976

Infrared pyrometer for high resolution surface temperature measurements on rotating turbine blades

A high resolution pyrometer was developed and used to obtain temperature profiles of rotating turbine blades at tip speeds up to 366 meters per second (1200 fps). Surface temperature variations from 920 to 1250 K (1200 to 1800 F) can be measured and variations over distances of 0.05 cm (0.020 in.) can be resolved. Temperature profiles were obtained in near real time as hard copies from a computer display terminal. Temperatures measured with the prototype pyrometer and with thermocouples agreed to within 2 percent over the temperature range from 977 to 1144 K (1300 to 1600 F).

Uguccini, O. W.↗
NASA NTRS1977

A two-dimensional cascade solution using minimized surface singularity density distributions - with application to film cooled turbine blades

An investigation of the effects of coolant injection on the aerodynamic performance of cooled turbine blades is presented. The coolant injection is modeled in the inviscid irrotational adiabatic flow analysis through the cascade using the distributed singularities approach. The resulting integral equations are solved using a minimized surface singularity density criteria. The aerodynamic performance was evaluated using this solution in conjunction with an existing mixing theory analysis. The results of the present analysis are compared with experimental measurements in cold flow tests.

Mcfarland, E.↗