SEARCH · Search NASA

Results for “Transitional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Wavelet Techniques Applied to Modeling Transitional/Turbulent Flows in Turbomachinery

Computer simulation is an essential part of the design and development of jet engines for the aeropropulsion industry. Engineers concerned with calculating the flow in jet engine components, such as compressors and turbines, need simple engineering models that accurately describe the complex flow of air and gases and that allow them to quickly estimate loads, losses, temperatures, and other design parameters. In this ongoing collaborative project, advanced wavelet analysis techniques are being used to gain insight into the complex flow phenomena. These insights, which cannot be achieved by commonly used methods, are being used to develop innovative new flow models and to improve existing ones. Wavelet techniques are very suitable for analyzing the complex turbulent and transitional flows pervasive in jet engines. These flows are characterized by intermittency and a multitude of scales. Wavelet analysis results in information about these scales and their locations. The distribution of scales is equivalent to the frequency spectrum provided by commonly used Fourier analysis techniques; however, no localization information is provided by Fourier analysis. In addition, wavelet techniques allow conditional sampling analyses of the individual scales, which is not possible by Fourier methods.

Source record↗

NASA NTRS2009

Boundary Layer Transition Flight Experiment Implementation on OV-103

This slide presentation reviews the boundary layer transition experiment flown on Discovery. The purpose of the boundary layer transition flight experiment was to obtain hypersonic aero-thermodynamic data for the purpose of better understanding the flow transition from a laminar to turbulent boundary layer using a known height protuberance. The preparation of the shuttle is described, with the various groups responsibilities outlined. Views of the shuttle in flight with the experimental results are shown.

Spanos, Theodoros A.↗

NASA NTRSDate not supplied

WMLES of K-Type and Bypass Boundary-Layer Transition

A new wall model for transitional flows is applied to the wall-modeled large-eddy simulation of the Klebanoff (fundamental) and bypass transition mechanisms, continuing an effort to improve computational efficiency by mitigating resolution requirements for the disturbances upstream of transition. Comparison with direct-numerical simulation results shows good agreement in the region prior to transition, but agreement during and after transition is not as good as previous wall-modeled large-eddy simulations of the Herbert (subharmonic) transition mechanism using this wall model. This is apparently due to weaknesses in the modelling of the transition process itself.

wall-modeled large-eddy simulation↗

NASA NTRSDate not supplied

WMLES of K-Type and Bypass Boundary-Layer Transition

wall-modeled large-eddy simulation↗

NASA NTRS2005

Comprehensive Validation of an Intermittency Transport Model for Transitional Low-Pressure Turbine Flows

A transport equation for the intermittency factor is employed to predict transitional flows under the effects of pressure gradients, freestream turbulence intensities, Reynolds number variations, flow separation and reattachment. and unsteady wake-blade interactions representing diverse operating conditions encountered in low-pressure turbines. The intermittent behaviour of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, Mu(sub t), with the intermittency factor, gamma. Turbulent quantities are predicted by using Menter's two-equation turbulence model (SST). The onset location of transition is obtained from correlations based on boundary-layer momentum thickness, acceleration parameter, and turbulence intensity. The intermittency factor is obtained from a transport model which can produce both the experimentally observed streamwise variation of intermittency and a realistic profile in the cross stream direction. The intermittency transport model is tested and validated against several well documented low pressure turbine experiments ranging from flat plate cases to unsteady wake-blade interaction experiments. Overall, good agreement between the experimental data and computational results is obtained illustrating the predicting capabilities of the model and the current intermittency transport modelling approach for transitional flow simulations.

Suzen, Y. B.↗

NASA NTRS1991

Hypersonic cone flow predictions using an implicit upwind space-marching code

Solutions have been computed and results are presented for Problem 1, the case of Mach 9 transitional flow past a 7 deg half-angle cone at zero incidence. The solutions were computed using a code developed for the integration of the parabolized Navier-Stokes equations. The algorithm employed in the code is based on a Roe-type flux-difference-splitting scheme applied following a finite-volume approach. The basic algorithm has been modified to make it implicit and second-order accurate in the crossflow directions. Results are presented in terms of surface pressure and heat transfer as well as boundary layer profiles of pitot pressure, Mach number, and tangential velocity. The case was recalculated several times in an effort to determine sensitivities to such parameters as grid density, wall temperature, turbulence model parameters, as well as freestream expansion. Comparisons with the experimental data are presented and discussed.

Lawrence, Scott L.↗

NASA NTRS2013

Validation of a CFD Methodology for Variable Speed Power Turbine Relevant Conditions

Analysis tools are needed to investigate aerodynamic performance of Variable-Speed Power Turbines (VSPT) for rotorcraft applications. The VSPT operates at low Reynolds numbers (transitional flow) and over a wide range of incidence. Previously, the capability of a published three-equation turbulence model to predict accurately the transition location for three-dimensional heat transfer problems was assessed. In this paper, the results of a post-diction exercise using a three-dimensional flow in a transonic linear cascade comprising VSPT blading are presented. The measured blade pressure distributions and exit total pressure and flow angles for two incidence angles corresponding to cruise (i = 5.8deg) and takeoff (i = -36.7deg) were used for this study. For the higher loading condition of cruise and the negative incidence condition of takeoff, overall agreement with data may be considered satisfactory but areas of needed improvement are also indicated.

Ameri, Ali A.↗

NASA NTRS1990

Active turbulence control in wallbounded flow using direct numerical simulations

An exploratory study of concepts for active control of turbulent boundary layers using the direct numerical simulation technique was performed. Significant drag reduction was achieved when the surface boundary condition was modified such that it could suppress the large-scale structures present in the wall region. This was achieved by prescribing the normal component of velocity at the wall to be 180 deg out of phase with the normal velocity slightly above the wall at each instant. The drag reduction was accompanied with significant reduction in the intensity of the wall-layer structures and reductions in the magnitude of Reynolds stresses throughout the flow. Suitability of wall-pressure and shear-stress fluctuations for detection of flow structures above the wall was examined. A preliminary result obtained by applying the present control strategy to a transitional flow is also briefly described, from which one can infer a possible linkage between the control strategy and flow stability.

Kim, J.↗

NASA NTRS1991

Hysteresis and the transition between axisymmetric flow and wave flow in the baroclinic annulus

A numerical model is employed to establish the transitions between axisymmetric flow and wave flow in the rotating, differentially heated annulus experiments of Fein for both rigid lid and free surface cases. It is shown that, for most of the transitions, the method of computing a steady axisymmetric flow and then testing its linear stability to wave disturbance results in good agreement with the experiments. Implications for the investigation of the dynamics of the earth's atmosphere are considered.

Miller, Timothy L.↗

NASA NTRS2009

Experimental Studies of the Aerothermal Characteristics of the Project Orion CEV heat Shield in High Speed Transitional and Turbulent Flows

An experimental program has been completed by CUBRC exploring laminar, transitional, and turbulent flows over a 7.0% scale model of the Project ORION CEV geometry. This program was executed primarily to answer questions concerning the increase in heat transfer on the windward, or "hot shoulder" of the CEV heat shield from laminar to turbulent flow. To answer these questions CUBRC constructed and instrumented a 14.0 inch diameter Project ORION CEV model and ran a range of Reynolds numbers based on diameter from 1.0 to over 40 million at a Mach number of 8.0. These Reynolds numbers were selected to cover laminar to turbulent heating data on the "hot shoulder". Data obtained during these runs will be used to guide design decisions as they apply to heat shield thickness and extent. Several experiments at higher enthalpies were achieved to obtain data for code validation with real gas effects and transition. CUBRC also performed computation studies of these experiments to aid in the data reduction process and study turbulence modeling.

Wadhams, T.P.↗

NASA NTRS1988

Wavenumber transition and wavenumber vacillation in Eady-type baroclinic flows

Wavenumber transition and wavenumber vacillation are studied numerically in a maximum simplification Eady-type model with uneven Ekman dissipation. The spectral wave solution for the model contains three waves with adjacent zonal wavenumbers and the gravest meridional mode. The model only allows for wave-mean-flow interaction. The model is used to obtain the main characteristics of the process of wavenumber transition at various stratifications and the flow regime of wave-number vacillation at specific parameter settings. It is found that wavenumber vacillation is a flow regime observed at some parameter settings when the flow has at least two spatial and three temporal degrees of freedom. It is suggested that the balance between baroclinic forcing and damping adjusted by wave-mean-flow interaction is a basic mechanism for wavenumber transition and wavenumber vacillation.

Weng, H.-Y.↗

NASA NTRS2016

Boundary-Layer Detection at Cryogenic Conditions Using Temperature Sensitive Paint Coupled with a Carbon Nanotube Heating Layer

Detection of flow transition on aircraft surfaces and models can be vital to the development of future vehicles and computational methods for evaluating vehicle concepts. In testing at ambient conditions, IR thermography is ideal for this measurement. However, for higher Reynolds number testing, cryogenic facilities are often used, in which IR thermography is difficult to employ. In these facilities, temperature sensitive paint is an alternative with a temperature step introduced to enhance the natural temperature change from transition. Traditional methods for inducing the temperature step by changing the liquid nitrogen injection rate often change the tunnel conditions. Recent work has shown that adding a layer consisting of carbon nanotubes to the surface can be used to impart a temperature step on the model surface with little change in the operating conditions. Unfortunately, this system physically degraded at 130 K and lost heating capability. This paper describes a modification of this technique enabling operation down to at least 77 K, well below the temperature reached in cryogenic facilities. This is possible because the CNT layer is in a polyurethane binder. This was tested on a Natural Laminar Flow model in a cryogenic facility and transition detection was successfully visualized at conditions from 200 K to 110 K. Results were also compared with the traditional temperature step method.

Goodman, Kyle Z.↗

NASA NTRS1986

Direct simulation of hypersonic flows over blunt slender bodies

Results of a numerical study of low-density hypersonic flow about cylindrically blunted wedges and spherically blunted cones with body half angles of 0, 5, and 10 deg are presented. Most of the transitional flow regime encountered during entry between the free molecule and continuum regimes is simulated for a reentry velocity of 7.5 km/s by including freestream conditions of 70 to 100 km. The bodies are at zero angle of incidence and have diffuse and finite catalytic surfaces. Translational, thermodynamic, and chemical nonequilibrium effects are considered in the numerical simulation by utilizing the direct simulation Monte Carlo (DSMC) method. The numerical simulations show that noncontinuum effects such as surface temperature jump, and velocity slip are evident for all cases considered. The onset of chemical dissociation occurs at a simulated altitude of 96 km for the two-dimensional configurations. Comparisons between the DSMC and continuum viscous shock-layer calculations highlight the significant difference in flowfield structure predicted by the two methods.

Moss, J. N.↗

NASA NTRS1990

Direct simulation of hypersonic rarefied flow about a delta wing

Three-dimensional hypersonic rarefied flow about a delta wing at angle of incidence has been studied using the direct simulation Monte Carlo technique. Results are obtained for a transitional flow case which has been investigated in a nitrogen wind-tunnel experiment. The simulations are performed using a nonreacting, single-species gas model that accounts for rotational and vibrational internal energies. The computations yield an attached leeside flow associated with supersonic expansion over the leeside of the wing. Results are presented for the computed flowfield and surface quantities and overall aerodynamic coefficients.

Celenligil, M. Cevdet↗

NASA NTRSDate not supplied

Visible and Infrared Imaging of Various Flow Regimes in the Flow Boiling and Condensation Experiment Transfer Line

The Flow Boiling and Condensation Experiment (FBCE) Transfer Line (TL) test module is being developed to study fluid physics of cryogenic transfer lines in microgravity. The TL module will reside in the FBCE facility located within the Fluids Integration Rack (FIR) aboard the International Space Station (ISS). TL will use the same normal perfluoro hexane (nPFH) used in the previous FBCE test sections. To simulate cryogenic line transfer in the visualization section, a sapphire tube coated with indium tin oxide (ITO) is heated via Joule heated while a bypass line is used to flow liquid nPFH at the desired inlet conditions. Once the visualization line reaches steady-state temperature and pressure conditions, flow is diverted through the heated line and chilldown begins. All flow regimes observed within a cryogenic TL are created and studied using visible imaging with diffuse backlighting to image inverted annular flow, transition, and nucleate boiling. A visible laser light sheet provided by FIR will provide a means to observe and track droplets in the dispersed flow regime. IR imaging of the visualization tube outer surface with the emissivity of the ITO coating provides the surface chilldown temperature profile. Preliminary imaging system development includes some of the components used in the Flow Boiling Module (FBM) and some new components that are easily integrated into the PC-based system but will require some refinement to operate properly on the FIR PCIe/104 imaging system. Optical design and packaging within the limited volume of the module enclosure is also presented. This paper presents FBCE-TL visible and infrared laboratory-based imaging studies and anticipated visualization capabilities of the TL module under preliminary breadboard development and under the utilization constraints within the FBCE/FIR host facility.

transfer line↗

NASA NTRS1991

Three-dimensional rarefied flow simulations for the Aeroassist Flight Experiment vehicle

Hypersonic rarefied flow about the Aeroassist Flight Experiment vehicle has been investigated using a three-dimensional direct simulation Monte Carlo method. Calculations are performed for the transitional flows encountered during the vehicle's atmospheric entry for altitudes of 110 and 100 km with an entry velocity of 9.9 km/s. The simulations are performed using a five-species reacting gas model that account for rotational and vibrational internal energies. The solutions indicate that dissociation is important at altitudes of 110 km and below. Results are presented for surface pressures, convective heating, flowfield structure, and aerodynamic coefficient variations with altitude.

Celenligil, M. Cevdet↗

NASA NTRS1984

Transition and mixing in impulsively started jets and vortex rings

A new method is used to analyze transition in impulsively started jets and vortex rings. The method uses similarity variables to reduce the equations for unsteady particle paths to a quasi-autonomous system with the Reynolds number as a parameter. The flow pattern is represented in terms of the phase portrait of this system and the structure of the flow is defined by its critical points. Flow transition is examined in terms of bifurcations in the topology of the phase portrait which occur as the Reynolds number is increased. There is no assumption that the flow is parallel or that it is subjected to small disturbances. The method of analysis, through straightforward, is new and lies outside the usual small disturbance theory used to determine the stability of various profile shapes.

Cantwell, B. J.↗

NASA NTRS1987

Direct simulation of aerothermal loads for an aeroassist flight experiment vehicle

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the hypersonic flow about an elliptically blunted cone. The flow conditions are those for a proposed Aeroassist Flight Experiment (AFE) vehicle. The altitude range considered is that from 130 to 90 km which encompasses most of the transitional flow regime for the AFE vehicle, that is, the region bounded by free molecular and continuum flow. Freestream velocities of 9.9 to 7.5 km/sec are considered. The numerical simulations show that noncontinuum effects are evident for all cases considered. The onset of chemical dissociation occurs at a simulated altitude of about 130 km. Results presented highlight the thermal and chemical nonequilibrium nature of the flowfield and the impact of these effects on the surface heating and body drag. A calculation which included the additional effects of ionization and thermal radiation demonstrates that the inclusion of such efects would not significantly alter the surface quantities calculated in the present study. The radiative heating is negligible when compared with the convective heating, and the same would be true for the other conditions considered.

Dogra, Virendra K.↗