Search NASA⌕ Search

SEARCH · Search NASA

Results for “Turbulent boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Acoustic Radiation from High-Speed Turbulent Boundary Layers in a Tunnel-Like Environment

Direct numerical simulation of acoustic radiation from a turbulent boundary layer in a cylindrical domain will be conducted under the flow conditions corresponding to those at the nozzle exit of the Boeing/AFOSR Mach-6 Quiet Tunnel (BAM6QT) operated under noisy-flow conditions with a total pressure p(sub t) of 225 kPa and a total temperature of T(sub t) equal to 430 K. Simulations of acoustic radiation from a turbulent boundary layer over a flat surface are used as a reference configuration to illustrate the effects of the cylindrical enclosure. A detailed analysis of acoustic freestream disturbances in the cylindrical domain will be reported in the final paper along with a discussion pertaining to the significance of the flat-plate acoustic simulations and guidelines concerning the modeling of the effects of an axisymmetric tunnel wall on the noise field.

Duan, Lian↗
NASA NTRS1960

Measurements of Skin Friction of the Compressible Turbulent Boundary Layer on a Cone with Foreign Gas Injection

Measurements of average skin friction of the turbulent boundary layer have been made on a 15deg total included angle cone with foreign gas injection. Measurements of total skin-friction drag were obtained at free-stream Mach numbers of 0.3, 0.7, 3.5, and 4.7 and within a Reynolds number range from 0.9 x 10(exp 6) to 5.9 x 10(exp 6) with injection of helium, air, and Freon-12 (CCl2F2) through the porous wall. Substantial reductions in skin friction are realized with gas injection within the range of Mach numbers of this test. The relative reduction in skin friction is in accordance with theory-that is, the light gases are most effective when compared on a mass flow basis. There is a marked effect of Mach number on the reduction of average skin friction; this effect is not shown by the available theories. Limited transition location measurements indicate that the boundary layer does not fully trip with gas injection but that the transition point approaches a forward limit with increasing injection. The variation of the skin-friction coefficient, for the lower injection rates with natural transition, is dependent on the flow Reynolds number and type of injected gas; and at the high injection rates the skin friction is in fair agreement with the turbulent boundary layer results.

Pappas, Constantine C.↗
NASA NTRS1981

Turbulent boundary layer over solid and porous surfaces with small roughness

The turbulent boundary layer over a smooth, solid wall is examined along with a sandpaper-roughened, solid wall, and a porous wall. Suitable results are obtained with the smooth, solid wall for the Law of the Wall, the Defect Law, and the axial and turbulence intensities. The logarithmic portion of the Wall Law is shifted in the sandpaper-roughened, solid wall and an increase in the normal turbulence intensity and Reynolds stress is observed. An increase in the local skin friction values and all the turbulence values is found with the porous wall. The influence of a slightly rough, porous wall of sintered metal on the boundary layer is compared with a solid sandpaper-roughened wall in the same nominal K(+) range.

Kong, F. Y.↗
NASA NTRS1987

Measurements of time-dependent boundary layer turbulence in an oscillating flow

Changes in the time-dependent boundary-layer turbulence in an oscillating flow were investigated using the oscillating-flow facility described by Cook et al. (1985). Hot wire measurements were made across the boundary layer for frequencies ranging from 4 to 21 Hz at various positions from the boundary layer origin and with different amplitudes of velocity oscillation. The results clearly demonstrate that the turbulence level is influenced by the imposed oscillation. The variation of the turbulence level is not predicted well by the variation in boundary-layer thickness alone, indicating that the interaction between the imposed oscillation and the turbulence structure is more complex. It is suggested that turbulence models developed for steady flow may not be adequate for periodic turbulent flows.

Cook, William J.↗
NASA NTRS1985

The effects of anisotropic free-stream turbulence on turbulent boundary layer behavior

The effects of near-isotropic and highly anisotropic free-stream turbulence on mean flow properties of the turbulence structure of turbulent boundary layers in a near zero pressure gradient flow has been experimentally evaluated. Turbulence levels vary from 0.5% to 8.0% and the momentum thickness Reynolds number varies from 800 to 1100. The results indicate that the effects of free-stream turbulence on the classical boundary layer properties for near-isotropic turbulence which have been published by other investigators are similar to the case of highly anisotropic turbulence fields, while the effects of free-stream turbulence on the properties of the turbulent structure within the boundary layer for the case of near-isotropic turbulence are quite different compared to the highly anisotropic case.

Liang-Wei, F.↗
NASA NTRS1973

Calculation of eddy viscosity in a compressible turbulent boundary layer with mass injection and chemical reaction, volume 1

The turbulent kinetic energy equation is coupled with boundary layer equations to solve the characteristics of compressible turbulent boundary layers with mass injection and combustion. The Reynolds stress is related to the turbulent kinetic energy using the Prandtl-Wieghardt formulation. When a lean mixture of hydrogen and nitrogen is injected through a porous plate into the subsonic turbulent boundary layer of air flow and ignited by external means, the turbulent kinetic energy increases twice as much as that of noncombusting flow with the same mass injection rate of nitrogen. The magnitudes of eddy viscosity between combusting and noncombusting flows with injection, however, are almost the same due to temperature effects, while the distributions are different. The velocity profiles are significantly affected by combustion; that is, combustion alters the velocity profile as if the mass injection rate is increased, reducing the skin-friction as a result of a smaller velocity gradient at the wall. If pure hydrogen as a transpiration coolant is injected into a rocket nozzle boundary layer flow of combustion products, the temperature drops significantly across the boundary layer due to the high heat capacity of hydrogen. At a certain distance from the wall, hydrogen reacts with the combustion products, liberating an extensive amount of heat. The resulting large increase in temperature reduces the eddy viscosity in this region.

Omori, S.↗
NASA NTRS1996

On the Coupling Between a Supersonic Turbulent Boundary Layer and a Flexible Structure

A mathematical model and a computer code have been developed to fully couple the vibration of an aircraft fuselage panel to the surrounding flow field, turbulent boundary layer and acoustic fluid. The turbulent boundary layer model is derived using a triple decomposition of the flow variables and applying a conditional averaging to the resulting equations. Linearized panel and acoustic equations are used. Results from this model are in good agreement with existing experimental and numerical data. It is shown that in the supersonic regime, full coupling of the flexible panel leads to lower response and radiation from the panel. This is believed to be due to an increase in acoustic damping on the panel in this regime. Increasing the Mach number increases the acoustic damping, which is in agreement with earlier work.

Frendi, Abdelkader↗
NASA NTRS1977

Calculation of laminar and turbulent boundary layers for two-dimensional time-dependent flows

A general method for computing laminar and turbulent boundary layers for two-dimensional time-dependent flows is presented. The method uses an eddy-viscosity formulation to model the Reynolds shear-stress term and a very efficient numerical method to solve the governing equations. The model was applied to steady two-dimensional and three-dimensional flows and was shown to give good results. A discussion of the numerical method and the results obtained by the present method for both laminar and turbulent flows are discussed. Based on these results, the method is efficient and suitable for solving time-dependent laminar and turbulent boundary layers.

Cebeci, T.↗
NASA NTRS1988

Effects of free-stream turbulence on turbulent boundary layers with mild adverse pressure gradients

The influence of near isotropic free-stream turbulence on the shape factors and skin friction coefficients of turbulent boundary layers is presented for the cases of zero and mild adverse pressure gradients. With free-stream turbulence, improved fluid mixing occurs in boundary layers with adverse pressure gradients relative to the zero pressure gradient condition, with the same free-stream turbulence intensity and length scale. Stronger boundary layers with lower shape factors occur as a result of a lower ratio of the integral scale of turbulence to the boundary layer thickness, and to vortex stretching of the turbulent eddies in the free-stream, both of which act to improve the transmission of momentum from the free-stream to the boundary layers.

Hoffmann, J. A.↗
NASA NTRS1989

The influence of free-stream turbulence on turbulent boundary layers with mild adverse pressure gradients

The influence of near isotropic free-stream turbulence on the shape factors and skin friction coefficients of turbulent boundary layers is presented for the cases of zero and mild adverse pressure gradients. With free-stream turbulence, improved fluid mixing occurs in boundary layers with adverse pressure gradients relative to the zero pressure gradient condition, with the same free-stream turbulence intensity and length scale. Stronger boundary layers with lower shape factors occur as a result of a lower ratio of the integral scale of turbulence to the boundary layer thickness, and to vortex stretching of the turbulent eddies in the free-stream, both of which act to improve the transmission of momentum from the free-stream to the boundary layers.

Hoffmann, J. A.↗
NASA NTRS2015

Implicit Large-Eddy Simulations of Zero-Pressure Gradient, Turbulent Boundary Layer

A set of direct simulations of zero-pressure gradient, turbulent boundary layer flows are conducted using various span widths (62-630 wall units), to document their influence on the generated turbulence. The FDL3DI code that solves compressible Navier-Stokes equations using high-order compact-difference scheme and filter, with the standard recycling/rescaling method of turbulence generation, is used. Results are analyzed at two different Re values (500 and 1,400), and compared with spectral DNS data. They show that a minimum span width is required for the mere initiation of numerical turbulence. Narrower domains ((is) less than 100 w.u.) result in relaminarization. Wider spans ((is) greater than 600 w.u.) are required for the turbulent statistics to match reference DNS. The upper-wall boundary condition for this setup spawns marginal deviations in the mean velocity and Reynolds stress profiles, particularly in the buffer region.

Turblent boundary layer↗
NASA NTRS2012

Numerical Study of Pressure Fluctuations due to High-Speed Turbulent Boundary Layers

Direct numerical simulations (DNS) are used to examine the pressure fluctuations generated by fully developed turbulence in supersonic turbulent boundary layers with an emphasis on both pressure fluctuations at the wall and the acoustic fluctuations radiated into the freestream. The wall and freestream pressure fields are first analyzed for a zero pressure gradient boundary layer with Mach 2.5 and Reynolds number based on momentum thickness of approximately 2835. The single and multi-point statistics reported include the wall pressure fluctuation intensities, frequency spectra, space-time correlations, and convection velocities. Single and multi-point statistics of surface pressure fluctuations show good agreement with measured data and previously published simulations of turbulent boundary layers under similar flow conditions. Spectral analysis shows that the acoustic fluctuations outside the boundary layer region have much lower energy content within the high-frequency region. The space-time correlations reflect the convective nature of the pressure field both at the wall and in the freestream, which is characterized by the downstream propagation of pressure-carrying eddies. Relative to those at the wall, the pressure-carrying eddies associated with the freestream signal are larger and convect at a significantly lower speed. The preliminary DNS results of a Mach 6 boundary layer show that the pressure rms in the freestream region is significantly higher than that of the lower Mach number case.

Duan, Lian↗
NASA NTRS1978

Characteristics of Mach 10 transitional and turbulent boundary layers

Measurements of the mean flow properties of transitional and turbulent boundary layers in helium on 4 deg and 5 deg wedges were made for flows with edge Mach numbers from 9.5 to 11.3, ratios of wall temperature to total temperature of 0.4 to 0.95, and maximum length Reynolds numbers of one hundred million. The data include pitot and total temperature surveys and measurements of heat transfer and surface shear. In addition, with the assumption of local similarity, turbulence quantities such as the mixing length were derived from the mean flow profiles. Low Reynolds number and precursor transition effects were significant factors at these test conditions and were included in finite difference boundary layer predictions.

Watson, R. D.↗
NASA NTRS1987

Flowfield measurements in a separated and reattached flat plate turbulent boundary layer

The separation and reattachment of a large-scale, two-dimensional turbulent boundary layer at low subsonic speed on a flat plate has been studied experimentally. The separation bubble was 55 cm long and had a maximum bubble thickness, measured to the height of the mean dividing streamline, of 17 cm, which was twice the thickness of the inlet boundary layer. A combination of laser velocimetry, hot-wire anemometry, pneumatic probing techniques, and flow visualization were used as diagnostics. Principal findings were that an outer inviscid rotational flow was defined which essentially convected over the blockage associated with the inner, viscously dominated bubble recirculation region. A strong backflow region in which the flow moved upstream 100 percent of the time was measured near the test surface over the central 35 percent of the bubble. A laminar backflow boundary layer having pseudo-turbulent characteristics including a log-linear velocity profile was generated under the highly turbulent backflow. Velocity profile shapes in the reversed flow region matched a previously developed universal backflow profile at the upstream edge of the separation region but not in the steady backflow region downstream. A smoke flow visualization movie and hot-film measurements revealed low frequency nonperiodic flapping at reattachment. However, forward flow fraction data at reattachment and mean velocity profiles in the redeveloping boundary layer downstream of reattachment correlated with backward-facing step data when the axial dimension was scaled by the distance from the maximum bubble thickness to reattachment.

Patrick, William P.↗
NASA NTRS1983

An experimental study of surface curvature effects on a supersonic turbulent boundary layer

The mean flow results of an experimental study of compressible turbulent boundary layers in an adverse pressure gradient with and without surface curvature effects are presented. The test was conducted in an axisymmetric flow facility. The upstream Reynolds number based on boundary layer momentum thickness was 5884 and the boundary layer thickness was 0.90 cm. The curvature effects were examined by studying two flows with essentially identical adverse pressure gradients. One flow was along a concave compression surface test section, while the other was along a straight-walled test section. Mean flow measurements included wall static pressure distributions, wall temperatures, pitot pressure profiles and total temperature profiles. The mean flow results indicated that the surface curvature resulted in a definite increase of turbulent mixing in the boundary layer.

Chou, J. H.↗
NASA NTRS1950

Investigations of the wall-shearing stress in turbulent boundary layers

Because of the unsatisfactory state of knowledge concerning the surface shearing stress of boundary layers with pressure gradients, the problem is re-examined. It is found that for general turbulent boundary layers in wall proximity, that is, in the laminar sublayer, in the transition zone and in the part of the completely turbulent zone near the wall, the same universal law applies as for the plate flow.

BOUNDARY LAYER, TURBULENT - WALLS↗