Search NASA⌕ Search

SEARCH · Search NASA

Results for “ULTRAVIOLET DETECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

GRB 050717: A Long, Short-Lag Burst Observed by Swift and Konus

The long burst GRB 050717 was observed simultaneously by the Burst Alert Telescope (BAT) on Swift and the Konus instrument on Wind. Significant hard to soft spectral evolution was seen. Early gamma-ray and X-ray emission was detected by both BAT and the X-Ray Telescope (XRT) on Swift. The XRT continued to observe the burst for 7.1 days and detect it for 1.4 days. The X-ray light curve showed a classic decay pattern including evidence of the onset of the external shock emission at approx. 50 s after the trigger; the afterglow was too faint for a jet break to be detected. No optical, infrared or ultraviolet counterpart was discovered despite deep searches within 14 hours of the burst. The spectral lag for GRB 050717 was determined to be 2.5 +/- 2.6 ms, consistent, with zero and unusually short for a long burst. This lag measurement suggests that this burst has a high intrinsic luminosity and hence is at high redshift (z > 2.7). 050717 provides a good example of classic prompt and afterglow behavior for a gamma-ray burst.

Krimm, H. A.↗

Fabrication of Robust, Flat, Thinned, UV-Imaging CCDs

An improved process that includes a high-temperature bonding subprocess has been developed to enable the fabrication of robust, flat, silicon-based charge-coupled devices (CCDs) for imaging in ultraviolet (UV) light and/or for detecting low-energy charged particles. The CCDs in question are devices on which CCD circuitry has already been formed and have been thinned for backsurface illumination. These CCDs may be delta doped, and aspects of this type of CCD have been described in several prior articles in NASA Tech Briefs. Unlike prior low-temperature bonding subprocesses based on the use of epoxies or waxes, the high-temperature bonding subprocess is compatible with the deltadoping process as well as with other CCD-fabrication processes. The present improved process and its bonding, thinning, and delta-doping subprocesses, are characterized as postfabrication processes because they are undertaken after the fabrication of CCD circuitry on the front side of a full-thickness silicon substrate. In a typical case, it is necessary to reduce the thickness of the CCD to between 10 and 20 m in order to take advantage of back-side illumination and in order to perform delta doping and/or other back-side treatment to enhance the quantum efficiency. In the prior approach to the fabrication of back-side-illuminated CCDs, the thinning subprocess turned each CCD into a free-standing membrane that was fragile and tended to become wrinkled. In the present improved process, prior to thinning and delta doping, a CCD is bonded on its front side to a silicon substrate that has been prefabricated to include cutouts to accommodate subsequent electrical connections to bonding pads on the CCD circuitry. The substrate provides structural support to increase ruggedness and maintain flatness. At the beginning of this process, the back side of a CCD as fabricated on a full-thickness substrate is polished. Silicon nitride is deposited on the back side, opposite the bonding pads on the front side, in order to define a relatively thick frame. The portion of the CCD not covered by the frame is the portion to be thinned by etching.

Grunthaner, Paula↗

Fast Imaging Detector Readout Circuits with In-Pixel ADCs for Fourier Transform Imaging Spectrometers

Focal plane arrays (FPAs) with high frame rates and many pixels benefit several upcoming Earth science missions including GEO-CAPE, GACM, and ACE by enabling broader spatial coverage and higher spectral resolution. FPAs for the PanFTS, a high spatial resolution Fourier transform spectrometer and a candidate instrument for the GEO-CAPE mission are the focus of the developments reported here, but this FPA technology has the potential to enable a variety of future measurements and instruments. The ESTO ACT Program funded the developed of a fast readout integrated circuit (ROIC) based on an innovative in-pixel analog-to-digital converter (ADC). The 128 X 128 pixel ROIC features 60 ?m pixels, a 14-bit ADC in each pixel and operates at a continuous frame rate of 14 kHz consuming only 1.1 W of power. The ROIC outputs digitized data completely eliminating the bulky, power consuming signal chains needed by conventional FPAs. The 128 X 128 pixel ROIC has been fabricated in CMOS and tested at the Jet Propulsion Laboratory. The current version is designed to be hybridized with PIN photodiode arrays via indium bump bonding for light detection in the visible and ultraviolet spectral regions. However, the ROIC design incorporates a small photodiode in each cell to permit detailed characterization of the ROICperformance without the need for hybridization. We will describe the essential features of the ROIC design and present results of ROIC performance measurements.

focal plane arrays (FPAs)↗

Kilonova Detectability with Wide-Field Instruments [Slides]

A diverse set of instruments increase the chances of detecting and identifying a kilonova. Early observations increase the probability of detection. More sensitive wide-field ultraviolet instruments are needed as GW detectors reach design sensitivity. There is a dearth of wide-field infrared instruments. These results are useful for guiding kilonova searches following a GW detection and sGRD observation, proposals for time on current and upcoming instruments, and planning future wide-field instruments.

79 ASTRONOMY AND ASTROPHYSICS↗

Astronomical imaging investigations for Shuttle and Spacelab missions

General objectives of space astronomical imagery are briefly examined, taking into account the improved angular resolution achievable in space observations, the utilization of an accessibility of the far ultraviolet spectral range for an easier detection and more accurate measurement of very hot stars, the determination of the structure and evolution of galaxies, and the determination of the cosmic distance scale. Attention is given to the Ultraviolet Imaging Telescope, the Spacelab Wide Angle Telescope, and the Starlab UV/optical telescope facility. It is pointed out that Starlab is envisioned as a multi-instrument, multi-purpose astronomical facility based on a near-diffraction-limited Ritchey-Chretien telescope of about 1 meter aperture and f/15 focal ratio. These resolutions are a factor of 10 better than typically achieved with ground-based telescopes.

Carruthers, G. R.↗

Far-ultraviolet diffuse galactic light

Diffuse galactic light is detected at very low galactic latitudes, and useful upper limits are obtained at moderate and high galactic latitudes. Together, these data indicate that the albedo of the interstellar grains is high (a greater than 0.5) and that the grains very strongly (g greater than 0.7) forward-scatter far-ultraviolet radiation.

Henry, R. C.↗

Extreme Ultraviolet Explorer deep survey observations of a large flare on AU Microscopii

We have made the first extended observation of a stellar flare in the EUV with 100 s time resolution. The flare was detected on AU Mic by the Extreme Ultraviolet Explorer satellite at 12:38 UT on 1992 July 15 during a 4 d observation from 1992 July 14 to 18. This was a large flare detected in the Lexan/boron (65-190 A) band with an observed peak count rate of 7.0 +/- 0.5 counts/s, corresponding to a peak luminosity of 10 exp 30 erg/s in the Lexan/boron bandpass. This is significantly above the measured quiescent level of 0.4 +/- 0.2 counts/s. The flare consisted of a sharp peak lasting about 2 hr, followed by a decaying tail that lasted more than a day. The total EUV energy of the event is estimated to be 3 x 10 exp 34 ergs. A second, smaller flare was also observed and is described. We conclude that the large emission measures on order of 6 x 10 exp 53/cu cm are due to large volumes with characteristic length scales of order the stellar radius. We compare these EUV observations with stellar flare observations in other bandpasses and estimate the likelihood of seeing similar flares in future observations.

Cully, Scott L.↗

UVOT Detection of GRB Afterglows

The automated response of the UltraViolet and Optical Telescope (UVOT) on Swift to new GRBs has remained stable since March 15,2006. From then through August 10, 2007, UVOT observed 122 of the 129 GRBs detected with Swift's Burst Alert Telescope (BAT). UVOT typically takes an initial 100-s exposure with the White filter (160-650 nm) starting 60 - 180 s after the trigger followed by exposures with the other 6 filters. UVOT detected 37% of the 79 long GRBs (T90 > 2.0 s) that had modest reddening in the Milky Way (E(B-V) < 0.5) and were observed within 180 seconds of the trigger. Magnitudes ranged from 12.8 to the sensitivity limit of approx.21. Only 1 of 8 short GRBs were detected, and its magnitude was near the sensitivity limit. We also report correlations of afterglow magnitudes with other GRB properties.

Marshall, Frank↗

Ultraviolet Lidar Would Measure Wind Velocity

Incoherent Doppler-shifted scattering from aerosols reveals important weather data. Remote-sensing system in early stage of development makes global measurements of wind velocities along probing beam of ultraviolet light. In aviation system promotes safety through detection of wind shears and clear-air turbulence. System includes range-gated ultraviolet-excimer laser operating at 308 or 353 nm.

Mcdermid, Iain Stuart↗

IUE spectra of flares on AU Mic

Some IUE spectra were obtained in August 1980 through a substantial part of the optical cycle of the BY Draconis-type, spotted M dwarf star, AU Mic. No modulation of the ultraviolet emission line fluxes in antiphase with the optical curve is detected. Simultaneous optical photometry of AU Mic shows remarkably poor correlation of optical flare strength and ultraviolet emission-line enhancements. The flares detected on AU Mic show considerable variety in the degree of enhancement in the various emission lines and optical continuum.

Butler, C. J.↗

Use of UV Sources for Detection and Identification of Explosives

Measurement of Raman and native fluorescence emission using ultraviolet (UV) sources (<400 nm) on targeted materials is suitable for both sensitive detection and accurate identification of explosive materials. When the UV emission data are analyzed using a combination of Principal Component Analysis (PCA) and cluster analysis, chemicals and biological samples can be differentiated based on the geometric arrangement of molecules, the number of repeating aromatic rings, associated functional groups (nitrogen, sulfur, hydroxyl, and methyl), microbial life cycles (spores vs. vegetative cells), and the number of conjugated bonds. Explosive materials can be separated from one another as well as from a range of possible background materials, which includes microbes, car doors, motor oil, and fingerprints on car doors, etc. Many explosives are comprised of similar atomic constituents found in potential background samples such as fingerprint oils/skin, motor oil, and soil. This technique is sensitive to chemical bonds between the elements that lead to the discriminating separability between backgrounds and explosive materials.

Hug, William↗

Ozone/Ultraviolet-Photo-Oxidation Reactor

Experimental chemical-processing system destroys waste hydrazine in water by use of ozone in ultraviolet-photo-oxidation reactor. New process reduces concentrations of hydrazines and intermediate decomposition products in effluent liquid and gas to below limit of detectability. Liquid sprayed in reaction chamber past ultraviolet lamps, against flow of oxygen and ozone. Hydrazines and intermediate decomposition products oxidized to harmless substances. Effectiveness and speed of process depends on maintenance of circulating liquid at correct pH, determines lower limit of oxidation by ozone.

Swartz, Ari Ben↗

NASA Tech Briefs, April 2010

Topics covered include: Active and Passive Hybrid Sensor; Quick-Response Thermal Actuator for Use as a Heat Switch; System for Hydrogen Sensing; Method for Detecting Perlite Compaction in Large Cryogenic Tanks; Using Thin-Film Thermometers as Heaters in Thermal Control Applications; Directional Spherical Cherenkov Detector; AlGaN Ultraviolet Detectors for Dual-Band UV Detection; K-Band Traveling-Wave Tube Amplifier; Simplified Load-Following Control for a Fuel Cell System; Modified Phase-meter for a Heterodyne Laser Interferometer; Loosely Coupled GPS-Aided Inertial Navigation System for Range Safety; Sideband-Separating, Millimeter-Wave Heterodyne Receiver; Coaxial Propellant Injectors With Faceplate Annulus Control; Adaptable Diffraction Gratings With Wavefront Transformation; Optimizing a Laser Process for Making Carbon Nanotubes; Thermogravimetric Analysis of Single-Wall Carbon Nanotubes; Robotic Arm Comprising Two Bending Segments; Magnetostrictive Brake; Low-Friction, Low-Profile, High-Moment Two-Axis Joint; Foil Gas Thrust Bearings for High-Speed Turbomachinery; Miniature Multi-Axis Mechanism for Hand Controllers; Digitally Enhanced Heterodyne Interferometry; Focusing Light Beams To Improve Atomic-Vapor Optical Buffers; Landmark Detection in Orbital Images Using Salience Histograms; Efficient Bit-to-Symbol Likelihood Mappings; Capacity Maximizing Constellations; Natural-Language Parser for PBEM; Policy Process Editor for P(sup 3)BM Software; A Quality System Database; Trajectory Optimization: OTIS 4; and Computer Software Configuration Item-Specific Flight Software Image Transfer Script Generator.

Source record↗

A Complete Sample of Hot Post-AGB Stars in Globular Clusters

Ultraviolet images of globular clusters are often dominated by one or two "UV-bright" stars. The most luminous of these are believed to be post-AGB stars, which go through a luminous UV-bright phase as they leave the AGB and move rapidly across the HR diagram toward their final white dwarf state. During the two flights of the ASTRO observatory in 1990 and 1995, the Ultraviolet Imaging Telescope (UIT, Stecher 1997, PASP, 109, 584) was used to obtained ultraviolet (1600 A) images of 14 globular clusters. These images provide a complete census of hot (> 8000 K) post-AGB stars in the observed globular clusters, because the 40' field of view of UIT is large enough to image the entire population of most Galactic globulars, and because the dominant cool star population is suppressed in ultraviolet images, allowing UV-bright stars to be detected into the cluster core. We have begun a program of optical and STIS ultraviolet spectroscopy to determine the fundamental stellar parameters (\log L, T_eff, \log g) of all the hot post-AGB candidates discovered on the UIT images. Among the goals of our program are to test theoretical post-AGB lifetimes across the HR diagram, and to estimate the mass of the currently forming white dwarfs in globular clusters. Two trends are already apparent in our survey. First, the UV-selected sample has removed a bias against the detection of the hottest post-AGB stars, and resulted in the discovery of five cluster post-AGB stars with Teff > 50,000 K. Second, most of the new discoveries have been lower luminosity (2.5 $<$\log L $<$ 3.0) than expected for stars which leave the AGB during the thermally pulsating phase.

Landsman, W.↗

The early bolometric evolution of Nova Cygni 1992

We report on combined ultraviolet and optical observations of early stages of the outburst of Nova Cygni 1992. We show that the initial optical rise and decline were produced by the dramatic increase in UV line opacity and its gradual subsequent lifting as the ejecta expand. The source of the M(sub v) - t(sub 3) relation is easily understood in light of these low-resolution UV spectra. The multiwavelength data confirm the theoretical prediction that a nova evolves at a constant bolometric luminosity in the early stages of outburst. We verify the prediction for this nova for at least the first month of the outburst. The detection of far-UV radiation with the Voyager Ultraviolet Spectrometer and the detection of an increasing X-ray flux with Roentgen Satellite (ROSAT) imply that this phase lasted for more than 6 months.

Shore, Steven N.↗

Criegee intermediates: production, detection and reactivity

In the context of tropospheric chemistry, Criegee intermediates denote carbonyl oxides with biradical/zwitterionic character (R 1 R 2 COO) that form during the ozonolysis of alkenes. First discovered almost 70 years ago, stabilised versions of Criegee intermediates formed via collisional removal of excess energy have interesting kinetic and mechanistic properties. The direct production and detection of these intermediates were not reported in the literature until 2008. However, recent advances in their generation through the ultraviolet irradiation of the corresponding diiodoalkanes in excess O 2 and detection by various spectroscopic techniques (photoionisation, ultraviolet, infrared, microwave and mass spectrometry) have shown that these species can react rapidly with closed-shell molecules, in many cases at or exceeding the classical gas-kinetic limit, via multiple reaction pathways. These reactions can be complex, and laboratory measurements of products and the temperature and pressure dependence of the reaction kinetics have also revealed unusual behaviour. The possible role of these intermediates in atmospheric chemistry is significant, altering models of the oxidising capacity of the Earth's atmosphere and the rate of generation of secondary organic aerosol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The application of an ultraviolet sensitive fire detector in a manned space vehicle.

Description of a detector which is sensitive to the ultraviolet molecular emissions of flames and has been selected as the basic element of the NASA Skylab fire-detection system. This detector is sensitive to approximately 10 to the minus 12th watts of ultraviolet radiation and will detect small flames at distances in excess of three meters. Its response to a variety of burning spacecraft materials has been investigated both in one-gravity and zero-gravity. The results of experiments conducted in an aircraft flying zero-gravity parabolas in an attempt to simulate the characteristics of a fire which the detector must sense are cited.

Linford, R. M. F.↗

Spectroscopic Chemical Analysis Methods and Apparatus

Spectroscopic chemical analysis methods and apparatus are disclosed which employ deep ultraviolet (e.g. in the 200 nm to 300 nm spectral range) electron beam pumped wide bandgap semiconductor lasers, incoherent wide bandgap semiconductor light emitting devices, and hollow cathode metal ion lasers to perform non-contact, non-invasive detection of unknown chemical analytes. These deep ultraviolet sources enable dramatic size, weight and power consumption reductions of chemical analysis instruments. In some embodiments, Raman spectroscopic detection methods and apparatus use ultra-narrow-band angle tuning filters, acousto-optic tuning filters, and temperature tuned filters to enable ultra-miniature analyzers for chemical identification. In some embodiments Raman analysis is conducted along with photoluminescence spectroscopy (i.e. fluorescence and/or phosphorescence spectroscopy) to provide high levels of sensitivity and specificity in the same instrument.

Hug, William F.↗