SEARCH · Search NASA

Results for “Vertical Flight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Optimization and guidance of abort landing trajectories in a windshear

The abort landing problem for flight trajectories in the presence of windshear is considered with reference to flight in a vertical plane. The optimal trajectory (OT) problem is a minimax problem or Chebyshev problem of optimal control which can be converted into a Bolza problem through suitable transformations. Numerical results for several combinations of windshear intensities and initial altitudes are presented. A guidance trajectory (GT) law is implemented in feedback control form, subject to prescribed bounds on the angle of attack and its time derivative. Simplified guidance trajectories (SGT) are then considered, leading to a safe target altitude guidance. Conclusions derived for strong-to-severe windshear conditions include GT and SGT preserving the basic properties of OT, and the peak altitude drop of GT and SGT being less than that of the constant pitch trajectory and the maximum angle-of-attack trajectory.

Miele, A.↗

NASA NTRS1988

Penetration landing guidance trajectories in the presence of windshear

Flight trajectory guidance in the presence of windshear is considered with reference to flight in a vertical plane. Both horizontal shear and the presence of a downdraft are assumed. The optimal trajectory is first determined by minimizing a performance index which is subject to touchdown constraints, under the assumption of control via angle of attack and power setting. It is shown that the coupling relation between the angle of attack and the power setting can be ignored. A guidance scheme is constructed in which the angle of attack is determined by the windshear intensity, the absolute path inclination, and the glide slope angle, while the power setting is determined by the windshear intensity and the velocity. Particular attention is given to low-altitude penetration landing.

Miele, A.↗

NASA NTRS1989

Overview of optimal trajectories for flight in a windshear

Optimal flight trajectories for the B-727, B-737, and B-747 aircraft in the presence of wind shear are studied. The takeoff problem and the abort landing problem are considered with reference to flight in a vertical plane. In the former, optimal trajectories are computed by minimizing the peak deviation of the absolute path inclination from a reference value; in the latter, optimal trajectories are computed by minimizing the peak value of the altitude drop. Numerical computations show that, for both the problems under consideration, the optimal trajectories of the three aircraft show the same qualitative behavior. Hence, it appears that the near-optimal guidance schemes developed for the B-727 can be extended to the other two aircraft, albeit with some quantitative modification.

Miele, A.↗

NASA NTRS1989

Abort landing guidance trajectories in the presence of windshear

The flight trajectory of abort landing in the presence of windshear is examined with reference to flight in a vertical plane. It is assumed that the only control is the angle of attack. Inequality constraints are imposed on both the angle of attack and its time derivative. Numerical results are obtained for several combinations of windshear intensities and initial altitudes. Guidance trajectories are considered, approximating the optimal trajectories and using local information on the state of the aircraft, the initial altitude, and the total wind velocity difference. Results are presented for optimal trajectories, guidance trajectories, simplified guidance trajectories, constant pitch trajectories, and maximum angle of attack trajectories.

Miele, A.↗

NASA NTRS1989

Noise considerations for tiltrotor

A projection is made of the technology-development requirements faced by aircraft designers contemplating the evolution of V-22-type tilt-rotor aircraft technology into a civilian tilt-rotor commuter aircraft of the requisite scale and payload. These research challenges are noted to often involve the reduction of noise level to values tolerated by passengers within the cabin and communities in the vicinity of airports, especially during hover and in the course of transition from vertical to horizontal flight (and vice-versa). Noise-generation and noise-radiation characteristics research has been undertaken using the XV-15 tilt-rotor proof-of-concept aircraft.

Huston, Robert J.↗

NASA NTRS1989

Analytic solution for vertical launch into orbit

An approximate analytic solution is presented for the motion and heating of nonlifting spacecraft launched vertically for ascending flight through the atmosphere into earth orbit. The solution is based on Chapman's Z-function transformation of the equations of motion with the assumption of an exponential atmosphere. The transformed equations have been modified to include the effects of thrusting with mass loss. It is assumed that the vehicle negotiates a gravity turn during ascent so that the thrust vector is aligned in the flight-path direction. Numerical results are presented to document the analytic solution and provide evidence of the useful information generated by it.

Boltz, Frederick W.↗

NASA NTRS1992

Observations of height-dependent pressure-perturbation structure of a strong mesoscale gravity wave

Airborne observations using a downward-looking, dual-frequency, near-infrared, differential absorption lidar system provide the first measurements of the height-dependent pressure-perturbation field associated with a strong mesoscale gravity wave. A pressure-perturbation amplitude of 3.5 mb was measured within the lowest 1.6 km of the atmosphere over a 52-km flight line. Corresponding vertical displacements of 250-500 m were inferred from lidar-observed displacement of aerosol layers. Accounting for probable wave orientation, a horizontal wavelength of about 40 km was estimated. Satellite observations reveal wave structure of a comparable scale in concurrent cirrus cloud fields over an extended area. Smaller-scale waves were also observed. Local meteorological soundings are analyzed to confirm the existence of a suitable wave duct. Potential wave-generation mechanisms are examined and discussed. The large pressure-perturbation wave is attributed to rapid amplification or possible wave breaking of a gravity wave as it propagated offshore and interacted with a very stable marine boundary layer capped by a strong shear layer.

Starr, David O'C.↗

NASA NTRS1967

Langley's 50th Year

This video gives an historical overview of Langley Research Center's major achievements in aeronautics and astronautics research between the years 1917-1967. Historical footage accompanies explanation of research into wind tunnel, spin tunnel, and hydrodynamic test tanks for studying aircraft airflow, wartime research into overwater combat ditching, diving, and braking, the X series aircraft experiments with supersonic flight, helicopter and vertical Take Off and Landing (VTOL) aircraft, airport landing studies, and early prototypes for the Space Shuttle.

Source record↗

NASA NTRS1968

Noise Considerations for V/STOL Transports

Noise consideration may well be as important a factor in future aircraft concept selection as such economic factors as operating cost and profitability. The impact of noise on some of the design and operational aspects of future V/STOL transports is examined in detail, including consideration of configuration, attitude-control system, lift system, and terminal flight pattern. Extended vertical rise of VTOL aircraft as a method of limiting the intense noise exposure to the terminal area is shown to be only partially effective as well as costly. Comparisons are made of noise contours for conceptual V/STOL transports for several PNdB criteria. The variation in extent of affected area with configuration and criterion emphasizes the importance of establishing an "acceptable" noise level for "city-center" operation.

Kenyon, George C.↗

NASA NTRS1961

Calculated Normal Load Factors on Light Airplanes Traversing the Trailing Vortices of Heavy Transport Airplanes

Results are presented of normal-load-factor calculations made for a lightnormal-category airplane and a light transport-category airplane traversing the trailing vortices generated by each of three heavy transport airplanes. With each light airplane, the normal load factors were determined for several penetration paths lying i n a plane perpendicular to the trailing vortices and for three center-of-gravity locations and velocities. Also determined for the light normal-category airplane were the elevator deflections required to maintain 1 g flight and the vertical displacements of the airplane from the prescribed penetration paths while transversing the vortices.

McGowan, William A.↗

NASA NTRS2007

A Procedure for Modeling Structural Component/Attachment Failure Using Transient Finite Element Analysis

Structures often comprise smaller substructures that are connected to each other or attached to the ground by a set of finite connections. Under static loading one or more of these connections may exceed allowable limits and be deemed to fail. Of particular interest is the structural response when a connection is severed (failed) while the structure is under static load. A transient failure analysis procedure was developed by which it is possible to examine the dynamic effects that result from introducing a discrete failure while a structure is under static load. The failure is introduced by replacing a connection load history by a time-dependent load set that removes the connection load at the time of failure. The subsequent transient response is examined to determine the importance of the dynamic effects by comparing the structural response with the appropriate allowables. Additionally, this procedure utilizes a standard finite element transient analysis that is readily available in most commercial software, permitting the study of dynamic failures without the need to purchase software specifically for this purpose. The procedure is developed and explained, demonstrated on a simple cantilever box example, and finally demonstrated on a real-world example, the American Airlines Flight 587 (AA587) vertical tail plane (VTP).

Lovejoy, Andrew E.↗

NASA NTRS2018

Aerodynamics and Aeroacoustic Sources of a Coaxial Rotor

Vehicles with coaxial, contra-rotating rotor systems (CACR) are being considered for a range of applications. Design parameters are identified that effect the fundamental aerodynamics and fluid dynamic features of a CACR in hover, vertical, and edgewise flight. Understanding the fluid dynamic features is a precursor to studying the aeroacoustics of a coaxial rotor. Rotor performance was computed initially using Navier-Stokes solver with prescribed blade section aerodynamic properties, the results validated against generic experimental test cases. Using a A 2D potential flow code and 2D OVERFLOW compressible-flow Navier-Stokes solver, the fluid dynamics of blade interactions was simplified and broken into a 2D blade crossing problem, with crossing locations and velocity fields from the rotor results to understand circulation, thickness, compressibility, shed vorticity, downwash, and viscosity effects. A calculation tool has been developed to identify time and location of blade overlap and BVI time location for CACR. Specific aerodynamic phenomena that occur for each noise source relevant to CACR are presented, along with computational tools to predict these occurrences.

Aeroacoustic↗

NASA NTRS1992

Effects of gravitoinertial force variations on optokinetic nystagmus and on perception of visual stimulus orientation

Recordings of horizontal and vertical eye movement were obtained with subjects exposed to vertical, horizontal, and oblique optokinetic stimulation during parabolic flight. When the optokinetic stimulation was vertical, the upward slow phase eye velocity increased increased during transition from high force level to free-fall, and decreased during transition from free-fall to high force level. During optokinetic stimulation in the horizontal and oblique plane, the gravitoinertial forces of parabolic flight induced changes in the velocity of the vertical component of the eye movements, and, therefore, changes in the plane of the eye movements. Some subjects also preceived modifications in the apparent orientation of the visual motion. These findings are in agreement with previous observations on the presence of a vertical nystagmus induced by changes in plane vertical acceleration. They also suggest a close interaction of reflexive eye movements induced by graviceptor inputs and visual inputs for visual stabilization during variations of gravitoinertial force level.

Clement, Gilles↗

NASA NTRS1985

Preliminary performance of a vertical-attitude takeoff and landing, supersonic cruise aircraft concept having thrust vectoring integrated into the flight control system

A performance study was made of a vertical attitude takeoff and landing (VATOL), supersonic cruise aircraft concept having thrust vectoring integrated into the flight control system. Those characteristics considered were aerodynamics, weight, balance, and performance. Preliminary results indicate that high levels of supersonic aerodynamic performance can be achieved. Further, with the assumption of an advanced (1985 technology readiness) low bypass ratio turbofan engine and advanced structures, excellent mission performance capability is indicated.

Robins, A. W.↗

NASA NTRS1959

Flight Investigation of Effects of Transition, Landing Approaches, Partial-Power Vertical Descents, and Droop-Stop Pounding on the Bending and Torsional Moments Encountered by a Helicopter Rotor Blade

Flight tests have been conducted with a single-rotor helicopter, one blade of which was equipped at 14 percent and 40 percent of the blade radius with strain gages calibrated to measure moments rather than stresses, to determine the effects of transition, landing approaches, and partial-power vertical descents on the rotor-blade bending and torsional moments. In addition, ground tests were conducted to determine the effects of static droop-stop pounding on the rotor-blade moments. The results indicate that partial-power vertical descents and landing approaches produce rotor-blade moments that are higher than the moments encountered in any other flight condition investigated to date with this equipment. Decelerating through the transition region in level flight was found to result in higher vibratory moments than accelerating through this region. Deliberately induced static droop-stop pounding produced flapwise bending moments at the 14-percent-radius station which were as high as the moments experienced in landing approaches and partial-power vertical descents.

Ludi, LeRoy H.↗

NASA NTRS2018

System and Method for Providing Visualization Aids for Effective Interval Management Procedure Execution

Methods and apparatus are provided for simulating an interval management (IM) procedure for an ownship aircraft and a target aircraft before the start of the performance of the IM procedure. The method comprises receiving an IM clearance message from air traffic control (ATC), parsing the received IM clearance message into parsed information components identifying the complexity of the IM clearance message based on the number of elements in the information components, generating a flight chart depicting the area over which the proposed IM procedure is to traverse using the mapping information wherein the flight chart includes a vertical view and a plan view, and simulating the IM procedure on the generated flight chart before any steps of the IM procedure are performed.

Kashi, Rajanikanth Nagaraj↗

NASA NTRS1958

Hovering and Transition Flight Tests of a 1/5-Scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An experimental investigation has been made to determine the dynamic stability and control characteristics of a 1/5-scale flying model of a jet-powered vertical-attitude VTOL research airplane in hovering and transition flight. The model was powered with either a hydrogen peroxide rocket motor or a compressed-air jet exhausting through an ejector tube to simulate the turbojet engine of the airplane. The gyroscopic effects of the engine were simulated by a flywheel driven by compressed-air jets. In hovering flight the model was controlled by jet-reaction controls which consisted of a swiveling nozzle on the main jet and a movable nozzle on each wing tip; and in forward flight the model was controlled by elevons and a rudder. If the gyroscopic effects of the jet engine were not represented, the model could be flown satisfactorily in hovering flight without any automatic stabilization devices. When the gyroscopic effects of the jet engine were represented, however, the model could not be controlled without the aid of artificial stabilizing devices because of the gyroscopic coupling of the yawing and pitching motions. The use of pitch and yaw dampers made these motions completely stable and the model could then be controlled very easily. In the transition flight tests, which were performed only with the automatic pitch and yaw dampers operating, it was found that the transition was very easy to perform either with or without the engine gyroscopic effects simulated, although the model had a tendency to fly in a rolled and sideslipped attitude at angles of attack between approximately 25 and 45 deg because of static directional instability in this range.

Smith, Charles C., Jr.↗

NASA NTRS1961

Hovering and Transition Flight Tests of a 1/5-Scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An experimental investigation has been made to determine the dynamic stability and control characteristics of a 1/5-scale flying model of a jet-powered vertical-attitude VTOL research airplane in hovering and transition flight. The model was powered with either a hydrogen peroxide rocket motor or a compressed-air jet exhausting through an ejector tube to simulate the turbojet engine of the airplane. The gyroscopic effects of the engine were simulated by a flywheel driven by compressed-air jets. In hovering flight the model was controlled by jet-reaction controls which consisted of a swiveling nozzle on the main jet and a movable nozzle on each wing tip; and in forward flight the model was controlled by elevons and a rudder. If the gyroscopic effects of the jet engine were not represented, the model could be flown satisfactorily in hovering flight without any automatic stabilization devices. When the gyroscopic effects of the jet engine were represented, however, the model could not be controlled without the aid of artificial stabilizing devices because of the gyroscopic coupling of the yawing and pitching motions. The use of pitch and yaw dampers made these motions completely stable and the model could then be controlled very easily. In the transition flight tests, which were performed only with the automatic pitch and yaw dampers operating, it was found that the transition was very easy to perform either with or without the engine gyroscopic effects simulated, although the model had a tendency to fly in a rolled and sideslipped attitude at angles of attack between approximately 25 deg and 45 deg because of static directional instability in this range.

Smith, Charles C., Jr.↗