Effect of angle of attack and injection pressure on jet penetration and spreading from a delta wing in supersonic flow
Effect of angle of attack and injection pressure on jet penetration and spreading from delta wing in supersonic flow
Hersch, M.↗
SEARCH · Search NASA
Results for “WINGS, DELTA - CHARACTERISTICS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flow phenomena and separation over delta wings with trailing-edge flaps at Mach 6.
Hypersonic flow distribution and separation types over highly swept delta wings with trailing edge flaps at Mach 6
Keyes, J. W.↗
Space shuttle: Basic hypersonic force data for Grumman delta wing orbiter configurations ROS-NB1 and ROS-WB1
Hypervelocity wind tunnel tests at Mach 10 of delta wing space shuttle models
Milhous, M.↗
Experimental investigation of the flow on the suction side of a thin Delta wing
Surface oil flow patterns were photographed and pressure distribution measurements were carried out on a sharp edged delta wing of aspect ratio lambda = 1.0 in order to determine the influence of Reynolds number and of vortex breakdown on the flow on the suction side of the wing. The formation of the secondary vortex occurs due to separation of a laminar boundary layer in the front part of the wing and due to separation of a turbulent boundary layer in the rear part of the wing. In the case of turbulent separation, the secondary separation line is closer to the wing leading edge than in the laminar case. The position of the transition depends on the Reynolds number and on the angle of incidence. The breakdown of a vortex above the wing leads to a kink in the secondary separation line.
Hummel, D.↗
Lee-side flow over delta wings at supersonic speeds
An experimental investigation of the lee-side flow on sharp leading-edge delta wings at supersonic speeds has been conducted. Pressure data were obtained at Mach numbers from 1.5 to 2.8, and three types of flow-visualization data (oil-flow, tuft, and vapor-screen) were obtained at Mach numbers from 1.7 to 2.8 for wing leading-edge sweep angles from 52.5 deg to 75 deg. From the flow-visualization data, the lee-side flows were classified into seven distinct types and a chart was developed that defines the flow mechanism as a function of the conditions normal to the wing leading edge, specifically, angle of attack and Mach number. Pressure data obtained experimentally and by a semiempirical prediction method were employed to investigate the effects of angle of attack, leading-edge sweep, and Mach number on vortex strength and vortex position. In general, the predicted and measured values of vortex-induced normal force and vortex position obtained from experimental data have the same trends with angle of attack, Mach number, and leading-edge sweep; however, the vortex-induced normal force is underpredicted by 15 to 30 percent, and the vortex spanwise location is overpredicted by approximately 15 percent.
Miller, D. S.↗
Measurement of leading edge vortices from a delta wing using a three component laser velocimeter
An investigation of the flow field above a 75-deg swept delta wing at a 20.5-deg angle of attack is described. The experiment was performed in the NASA Langley Basic Aerodynamic Research Tunnel (BART) using an orthogonal three-component laser velocimeter. Preliminary laser velocimeter results show velocity vectors in the cross flow plane at x/c = 0.5, revealing the formation of the primary and secondary vortices over the upper surface of the wing.
Meyers, James F.↗
Properties of a half-delta wing vortex
The mean flow and turbulence structure of a single longitudinal vortex generated by a half-delta wing placed at a small angle of attack were investigated. Particular consideration was given to the near-field properties of the generator in order to establish the role of the generator wake in the initial rolling-up of the vortex, as well as to the far-field properties so that the approach to equilibrium could be studied. Measurements were made on fine cross-plane grids at seven streamwise locations using hot cross wires. The results show that the point of maximum vorticity and the generator wake do not merge until a streamwise distance equivalent to three generator heights is reached. Comparison with previous data on vortices produced by double-branched generators confirmed that the present vortex had achieved a fully developed state, and at a relatively short streamwise distance.
Mehta, Rabindra D.↗
Comparison of Experimental and Theoretical Static Aeroelastic Loads and Deflections of a Thin 45 deg Delta Wing in Supersonic Flow
Wind tunnel tests showing the effects of static aeroelasticity for a thin 45 degree delta wing in supersonic flow are presented and compared with theory in the Mach number range 1.30 t o 4.00. Calculated deformations, normal-force coefficients, and pitching-moment coefficients based on a linearized potential theory for subsonic leading edges at a Mach number of 1.30 and a linearized potential theory for supersonic leading edges at Mach numbers of 1.64, 3.00, and 4.00 are shown to compare favorably with the wind-tunnel results. Calculations of these same deformations and coefficients based on piston theory are shown to compare satisfactorily with experiment at a Mach number of 4.00 but not so well at a Mach number of 3.00. A factor modification of piston theory is suggested which improves the correlation of these results with experiment and also with the potential-theory results.
Bennett, Floyd V.↗
Experimental Investigation of the Flow about a 65 deg Delta Wing in the NASA Langley National Transonic Facility
An experimental investigation for the flow about a 65 deg. delta wing has been conducted in the NASA Langley National Transonic Facility (NTF). The tests were conducted at Reynolds numbers, based on the mean aerodynamic chord, ranging from 6 million to 120 million and at Mach numbers ranging from 0.4 to 0.9. The model incorporated four different leading-edge bluntness values. The data include detailed static surfacepressure distributions as well as normal-force and pitching-moment coefficients. The test program was designed to quantify the effects of Mach number, Reynolds number, and leading-edge bluntness on the onset and progression of leading-edge vortex separation.
Luckring, James M.↗
Calculation of asymmetric vortex separation on slender delta wings with a vortex-sheet model
An inviscid vortex-sheet model based on the slender wing theory is developed to examine asymmetric vortex separation at zero sideslip on delta wings. It is found that multiple asymmetric vortex configurations exist at a given angle of attack. Available data on rolling moment measurements and flow visualization are used for correlation to prove the concept.
Lan, C. E.↗
Effect of leading edge roundness on a delta wing in wing-rock motion
The effect of wing leading-edge roundness on wing rock was investigated using flow visualization in a water tunnel. Eighty degree delta wing models were tested on free-to-roll and forced oscillation rigs. The onset of wing rock was delayed by increasing the roundness of the leading edges. The wing rock amplitude and frequency results suggested that damping was increased at lower angles of attack but reduced at higher angles of attack. Vortex lift-off and vortex breakdown, especially during dynamic situations, were strongly affected by the leading edge roundness. Different forms of wing rock motion could be sustained by combinations of vortex breakdown and vortex lift-off. Behaviors of the wing and vortex motions were explained by the influence of leading edge roundness on the separation location, vortex trajectory, and vortex breakdown.
Ng, T. Terry↗
Static force tests of a sharp leading edge delta-wing model at ambient and cryogenic temperatures with a description of the apparatus employed
A sharp leading edge delta-wing model was tested through an angle-of-attack range at Mach numbers of 0.75, 0.80, and 0.85 at both ambient and cryogenic temperatures in the Langley 1/3-meter transonic cryogenic tunnel. Total pressure was varied with total temperature in order to hold test Reynolds number constant at a given Mach number. Agreement between the aerodynamic data obtained at ambient and cryogenic temperatures indicates that flows with leading-edge vortex effects are duplicated properly at cryogenic temperatures. The test results demonstrate that accurate aerodynamic data can be obtained by using conventional force-testing techniques if suitable measures are taken to minimize temperature gradients across the balance and to keep the balance at ambient (warm) temperatures during cryogenic operation of the tunnel.
Kilgore, R. A.↗
Lee side flow for slender delta wings of finite thickness
An experimental and theoretical investigation carried out to determine the lee side flow field over delta wings at supersonic speeds is presented. A theoretical method to described the flow field is described, where boundary conditions as a result of the experimental study are needed. The computed flow field with shock induced separation is satisfactory.
Szodruch, J. G.↗
Summary of a high subsonic force/pressure experiment for 58 deg cambered/twisted thick delta wings
This paper summarizes the results of a force, moment, and pressure experiment involving six thick, cambered and twisted, delta wings with 58 deg leading-edge sweep. This experiment was conducted in the NASA Langley 7- by 10-foot High-Speed Tunnel at Mach numbers of 0.75, 0.80, and 0.83. The design goal was a configuration which was self-trimming at a lift coefficient of 0.25 and Mach number of 0.80. Although the design goal was not met, the configuration which came closest and which had the best overall performance was selected for further study. Wing surface pressure data and limited surface oil flow data for this configuration are presented to show the extent of attached flow at the design point. For selected cases, inviscid solutions from vortex lattice method/suction analogy, PAN AIR, FLO-28, and FLO-57 are compared with the experimental force, moment, and pressure data.
Chu, J.↗
Investigation of the vortex flap concept on a 75-deg sweep delta wing at supersonic speeds
An experimental investigation of the aerodynamic performance of vortex flaps on a 75-deg sweep delta wing has been conducted in the NASA Langley Unitary Plan Wind Tunnel at Mach numbers from 1.7 to 2.8. The sharp leading edge vortex flaps consisted of the outboard 30 percent of the local wing semispan. Flap deflections of 0, 5, 10, and 15 deg were investigated, for both a wing-alone and a wing-body configuration. The flaps were effective in reducing the drag across the lift-coefficient range. Integration of the upper surface pressure distributions showed that the suction pressures induced by the vortex on the flap were responsible for the drag reductions. At some lift conditions, the minimum drag condition permitted hinge line separation or vortex migration inboard of the hinge line. This result is in contrast to subsonic results, where optimum conditions call for no hinge line separation. The magnitude of the drag reduction due to flap deflection generally decreased as Mach number increased. The effect of a cylindrical forebody on the drag reduction due to flap deflection was minimal.
Covell, Peter F.↗
Investigation of vortex breakdown on a delta wing using Euler and Navier-Stokes equations
A numerical investigation of leading-edge vortex breakdown on a delta wing at high angles of attack is presented. The analysis has been restricted to low speed flows on a flat plate wing with sharp leading edges. Both Euler and Navier-Stokes (assuming fully laminar and fully turbulent flows) equations have been used in this study and the results are compared against experimental data. Predictions of vortex breakdown progression with angle of attack with both Euler and Navier-Stokes equations are shown to be consistent with the experimental data. However, the Navier-Stokes predictions show significant improvements in breakdown location at angles of attack where the vortex breakdown approaches the wing apex. The location of the primary vortex and the level of vorticity in the pre-breakdown regions in these flowfield solutions are affected very little by the viscous effects, even though the Navier-Stokes solutions exhibit viscous phenomena such as secondary and tertiary vortices which are not present in the Euler solutions. In the post-breakdown regions, however, the levels of vorticity in the primary vortex have increased differences between the Euler and Navier-Stokes solutions at comparable locations. Navier-Stokes indicates the presence of a secondary vortex even after the primary vortex is burst. The predicted trajectories of the primary vortex are in very good agreement with the test data, the laminar solutions providing the overall best comparison. The Euler shows a small displacement of the primary vortex, relative to experiment, due to the lack of secondary vortices. The turbulent Navier-Stokes, in general, fall between the Euler and laminar solutions. These findings are based on solutions from meshes that are not usually considered fine enough for resolving vortical flows. To further understand the vortex breakdown phenomenon and the fine details of the vortical flow structure, further calculations with the finer meshes and improved turbulence models are necessary.
S. Agrawal↗
Reynolds Number, Compressibility, and Leading-Edge Bluntness Effects on Delta-Wing Aerodynamics
An overview of Reynolds number, compressibility, and leading edge bluntness effects is presented for a 65 degree delta wing. The results of this study address both attached and vortex-flow aerodynamics and are based upon a unique data set obtained in the NASA-Langley National Transonic Facility (NTF) for i) Reynolds numbers ranging from conventional wind-tunnel to flight values, ii) Mach numbers ranging from subsonic to transonic speeds, and iii) leading-edge bluntness values that span practical slender wing applications. The data were obtained so as to isolate the subject effects and they present many challenges for Computational Fluid Dynamics (CFD) studies.
Luckring, James M.↗
Lee-side flow phenomena on space shuttle configurations at hypersonic speeds. Part 1: Flow separation and flow field viscous phenomena of a delta-wing shuttle orbiter configuration
Results of a pitot pressure investigation of the flow field on the lee side of a delta wing shuttle orbiter are presented. The results delineate the extent of the lee side separated flow and give a tentative cross sectional definition to the shock wave structure for angles of attack of 15 deg and 30 deg. It is shown that while, in general, the effects of Reynolds number on the flow field are not large, detailed effects are observed that may have significant bearing on the heating estimate. Two examples are cited for an angle of attack of 15 deg; these are: (1) The scope of the vertical tail exposed to the unseparated flow increases with increasing Reynolds number and (2) the depth of the separated flow adjacent ot where the bow wave crosses the wing appears to decrease with increasing Reynolds number. In addition, it is shown that at a spanwise station outboard of the wing-fuselage juncture, increasing Reynolds number decreased the pitot pressure in the unseparated flow. This defect of pitot pressure appears associated with the flow over the wing-fillet-fuselage juncture.
Cleary, J. W.↗