Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Planning, Implementation, and Scientific Goals of the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) Field Missions

The Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) field mission based at Ellington Field, Texas, during August and September 2013 employed the most comprehensive airborne payload to date to investigate atmospheric composition over North America. The NASA ER-2, DC-8, and SPEC Inc. Learjet flew 57 science flights from the surface to 20 km. The ER-2 employed seven remote sensing instruments as a satellite surrogate and eight in situ instruments. The DC-8 employed 23 in situ and five remote sensing instruments for radiation, chemistry, and microphysics. The Learjet used 11 instruments to explore cloud microphysics. SEAC4RS launched numerous balloons, augmented Aerosol RObotic NETwork, and collaborated with many existing ground measurement sites. Flights investigating convection included close coordination of all three aircraft. Coordinated DC-8 and ER-2 flights investigated the optical properties of aerosols, the influence of aerosols on clouds, and the performance of new instruments for satellite measurements of clouds and aerosols. ER-2 sorties sampled stratospheric injections of water vapor and other chemicals by local and distant convection. DC-8 flights studied seasonally evolving chemistry in the Southeastern U.S., atmospheric chemistry with lower emissions of NOx and SO2 than in previous decades, isoprene chemistry under high and low NOx conditions at different locations, organic aerosols, air pollution near Houston and in petroleum fields, smoke from wildfires in western forests and from agricultural fires in the Mississippi Valley, and the ways in which the chemistry in the boundary layer and the upper troposphere were influenced by vertical transport in convective clouds.

Toon, Owen B.↗
NASA NTRSDate not supplied

CFD Simulation of an Inward-Turning Supersonic Inlet Unstart at Flight Mach Number 1.7

Interest in inward-turning supersonic inlets renewed during NASA’s Commercial Supersonic Technology Project, as a means of reducing disturbances caused by propulsion integration. Inward-turning designs have the potential to greatly reduce the strength of shock waves emanating outward from the nacelle, and therefore their contribution to the overall sonic boom signature. For top-mounted, or over-wing installations, disturbances to aircraft aerodynamics are reduced. The nature of the inward-turning geometry results in a boundary-layer thickening effect, opposite that of the familiar thinning of an outward-turning cone boundary-layer. The application of a small amount of boundary-layer bleed at the throat has been shown to alleviate the negative effects of the boundary-layer on subsonic diffuser performance. Boundary-layer bleed, however, comes at the expense of increased complexity, and external disturbances at bleed exits that would partially defeat the purpose of the inward-turning scheme. Vortex generators were proposed as an alternative to bleed, and an initial CFD study of their effectiveness in this application forms the basis of the present work. A source-term model in the Wind-US CFD code was used to model the effects of an array of vortex generators placed at the entrance to the subsonic diffuser. Baseline results with no vortex generators compared favorably to previously reported results with no bleed at back-pressures near the design point, but stability margin in the present case was limited by a curious non-linear phenomena similar to unstart in mixed-compression inlets. While some improvement was noted with vortex generators, their effectiveness was diminished by the limited stability margin. A time-accurate calculation was subsequently performed to better understand this process. Results of this calculation are presented and instantaneous solutions compared with steady-state, subcritical results previously reported. The stability margin limitation is attributed to the use of a constant-pressure outflow boundary condition, which differed from that used in the prior simulations.

Pre-Compressor Cooling, Water Injection, Hypersoni↗
NASA NTRS2021

Hydraulic Jump Dynamics Above Supercell Thunderstorms

The strongest supercell thunderstorms typically feature an above-anvil cirrus plume (AACP), which is a plume of ice and water vapor in the lower stratosphere that occurs downwind of the ambient stratospheric flow in the lee of overshooting deep convection. AACP-origin hydration of the stratosphere has a poorly constrained role in ozone destruction and surface warming. In this study, we use large eddy simulations corroborated by radar observations to understand the physics of AACP generation. We show that the overshooting top of a simulated supercell can act as a topographic obstacle and drive a hydraulic jump downstream at the tropopause, similar to a windstorm moving down the slope of a mountain but without solid topography. Once the jump is established, water vapor injection deep into the stratosphere may exceed 7 tonnes per second.

Gerald M Heymsfield↗
NASA NTRSDate not supplied

Updated PSC Climatology Based on Caliop Measurements From 2006-2023

After more than three decades of research, the roles of polar stratospheric clouds (PSCs) in stratospheric ozone depletion are well established. Heterogeneous reactions on PSCs convert the stable chlorine reservoirs HCl and ClONO2 to chlorine radicals that destroy ozone catalytically. PSCs also prolong ozone depletion by delaying chlorine deactivation through the removal of gas-phase HNO3 and H2O by sedimentation of large nitric acid trihydrate (NAT) and ice particles. A substantial recovery of the ozone layer is expected by the middle of this century with reduced global production of ozone depleting substances in accordance with the Montreal Protocol and subsequent amendments. But as climate changes, leading to a colder and perhaps wetter stratosphere and upper troposphere, reliable model predictions of recovery of the Antarctic ozone hole and of potentially more severe ozone depletion in the Arctic are challenging. This is due both to a lack of detailed understanding of the underlying physics and the fact that many global models use simple parameterizations that do not accurately represent PSC processes. A more complete picture of PSC processes on vortex-wide scales has emerged from the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) instrument on the CALIPSO satellite that has been observing PSCs at latitudes up to 82 degrees in both hemispheres since June 2006. The CALIOP Version 2.0 (v2) PSC algorithm was recently developed to address known deficiencies in previous algorithms and includes additional refinements to increase the robustness of the inferred PSC composition. In this paper, we present an updated PSC reference data record and comprehensive climatology constructed by applying the v2 algorithm to the more than 17-year CALIOP spaceborne lidar dataset. In addition, we will examine the potential impact of aerosol and water vapor injections into the stratosphere from the January 2022 Hunga Tonga eruption on PSC occurrence in both the Arctic and Antarctic regions.

polar stratospheric clouds↗
NASA NTRSDate not supplied

Simulating Sulfate Aerosol Size in the Hunga Tonga Plume: Comparisons with Observations

Using the NASA GEOS Chemistry Climate Model (CCM) coupled to a detailed sectional aerosol microphysical model, we have simulated the January 2022 Hunga Tonga-Hunga Ha’apai (HTHH) plume. We have developed a version of the Global Modeling Initiative (GMI) chemistry mechanism to include the requisite sulfur chemistry and coupled it to the Community Aerosol and Radiation Model for Atmospheres (CARMA) sectional aerosol microphysics within the GEOS CCM. Our simulations focus on the lifecycle of stratospheric sulfur injected by the eruption–from the oxidation of the injected sulfur dioxide to the nucleation, growth, coagulation, hydration, and eventual settling of the volcanic sulfate aerosol particles. In order to constrain the simulated microphysics, we focus on comparing our model to observations with aerosol size information, namely in-situ particle counter observations and multi-wavelength satellite observations from OMPS-LP and SAGE-III. This eruption provides an interesting test case for our model; both the modeled gas-phase chemistry as well as the modeled aerosol microphysics are perturbed by the massive injection of water that accompanied the primary sulfur emissions from the eruption.

aerosols↗
NASA NTRSDate not supplied

Composition Reanalyses at NASA’s Global Modeling and Assimilation Office

Scientific Assessments of Ozone Depletion 2018 and 2022 report the recovery of Antarctic ozone, consistent with diminishing concentrations of halogens in the stratosphere. Both the size and the depth of the springtime ozone holes exhibit downward trends, particularly in September. Superimposed on the recovery trend are significant year-to-year fluctuations arising from dynamical variability potentially influenced by climate forcing and volcanic eruptions. Since 2018 the Antarctic stratosphere has experienced a wild parade of austral spring seasons with a sudden stratospheric warming and exceptionally high ozone in 2019 followed by large and long-lasting ozone holes in the following years, prompting questions about the speed and detectability of Antarctic ozone recovery and its potential connections to human-induced climate change. From the Australian New Years’ wildfires of 2020 to volcanic aerosols to the unprecedented injection of water vapor by the Hunga volcanic eruption, recent scientific literature on the subject investigates many factors that may or may not have contributed to this remarkable interannual variability. This presentation summarizes dynamical influences on springtime Antarctic stratospheric ozone in recent years and discusses these results in the context of long-term trends. In particular, this work seeks to isolate dynamical and chemical contributions to the Antarctic springs since 2019 using a consistent methodological framework. Our analysis uses constituent and meteorological fields from the MERRA-2 Stratospheric Composition Reanalysis of Aura MLS (M2-SCREAM) in combination with data from the Atmospheric Chemistry Experiment – Fourier Transform Spectrometer and from ozone sondes. Using the high spatial and temporal resolution of M2-SCREAM, we analyze the daily evolution of southern polar ozone, HCl, N2O, and water vapor in dynamical flow-following coordinates relative to the location, size, and shape of the polar vortex. For vertically integrated stratospheric ozone we emphasize the importance of the wave-influenced geometry of the polar vortex and its vertical alignment. The ultimate purpose of this project is to contribute to the quantification of the speed of the Antarctic ozone recovery and associated uncertainties.

Krzysztof Wargan↗
NASA NTRS2022

Perturbations in Stratospheric Aerosol Evolution Due to the Water-Rich Plume of the 2022 Hunga-Tonga Eruption

The January 2022 Hunga Tonga-Hunga Ha'apai (HTHH) volcanic eruption injected a relatively small amount of SO2, but significantly more water into the stratosphere than previously seen in the modern satellite record. Here we show that the large amount of water resulted in large perturbations to stratospheric aerosol evolution. Our Community Earth System Model simulation reproduces the enhanced water vapor observed by the Microwave Limb Sounder at pressure levels between 10 and 50 hPa for three months. Compared with a simulation without a water injection, this additional source of water vapor increases OH, which halves the SO2 lifetime. Subsequent coagulation creates larger sulfate particles that double the stratospheric aerosol optical depth. A seasonal forecast of volcanic plume transport in the southern hemisphere indicates this eruption will greatly enhance the aerosol surface area and water vapor near the polar vortex until at least October 2022, suggesting that there will continue to be an impact of the HTHH eruption on the climate system.

Atmospheric science↗
NASA NTRS1982

Simulation studies of the physical and chemical processes occurring in the stratospheric clouds of the Mount St. Helens eruptions of May and June 1980

The large and diverse set of observational data collected in the high-altitude clouds of May 18, May 25, and June 13, 1980 was organized and analyzed for trends which reveal the processes at work. The data were used to guide and constrain model simulations of the volcanic eruptions. A comprehensive one-dimensional model of stratospheric sulfate aerosols, sulfur precursor gases, and volcanic ash and dust particles is utilized which accounts for homogeneous and heterogeneous chemistry in the clouds, aerosol nucleation and growth, and cloud expansion. Computational results are given for the time histories of the gaseous species concentrations, sulfate aerosol size dispersions, and ash burdens in the eruption clouds. The long-term buildup of stratospheric aerosols in the Northern Hemisphere and the persistent effects of injected chlorine and water vapor on ozone are discussed. It is concluded that SO2, water vapor, and ash are the most important substances injected by the volcano into the stratosphere, with respect to both the widespread effects on composition and the impact on climate. It is found that the volcano probably had little influence on the climate ( 0.05 K global surface cooling) or on stratospheric ozone ( 0.2 percent maximum hemispherical reduction).

Turco, R. P.↗
NASA NTRS1983

The 1980 eruptions of Mount St. Helens - Physical and chemical processes in the stratospheric clouds

The large and diverse set of observational data collected in the high-altitude plumes of the May 18, May 25, and June 13, 1980 eruptions is organized and analyzed with a view to discerning the processes at work. The data serve to guide and constrain detailed model simulations of the volcanic clouds. For this purpose, use is made of a comprehensive one-dimensional model of stratospheric sulfate aerosols, sulfur precursor gases, and volcanic ash and dust. The model takes into account gas-phase and condensed-phase (heterogeneous) chemistry in the clouds, aerosol nucleation and growth, and cloud expansion. Computational results are presented for the time histories of the gaseous species concentrations, aerosol size distributions, and ash burdens of the eruption clouds. Also investigated are the long-term buildup of stratospheric aerosols in the Northern Hemisphere and the persistent effects of injected chlorine and water vapor on stratospheric ozone. It is concluded that SO2, water vapor, and ash were probably the most important substances injected into the stratosphere by the Mount St. Helens volcano, both with respect to their widespread effects on composition and their effect on climate.

Turco, R. P.↗
NASA NTRS2024

Evolving Particles in the 2022 Hunga-Tonga Hunga-Ha’apai Volcano Eruption Plume

The Multi-angle Imaging SpectroRadiometer (MISR) aboard NASA’s Terra satellite observed the Hunga Tonga—Hunga Ha’apai (HTHH) 15 January eruption plume on eight occasions between 15 and 23 January 2022. From the MISR multi-angle, multi-spectral imagery we retrieve aerosol plume height geometrically, along with plume-level motion vectors, and derive radiometrically constraints on particle effective size, shape, and light-absorption properties. Parts of two downwind aerosol layers were observed in different places and times, one concentrated in the upper troposphere (11-18 km ASL), and a mid-stratosphere layer~23 –30+ km ASL. After the initial day (1/15), the retrievals identified only spherical, non-light-absorbing particles, typical of volcanic sulfate/water particles. The near-tropopause plume particles show constant, medium-small (several tenths of a micron) effective size over four days. The mid-stratosphere particles were consistently smaller, but retrieved effective particle size increased between 1/17 and 1/23, though they might have decreased slightly on 1/22. As a vast amount of water was also injected into the stratosphere by this eruption, models predicted relatively rapid sulfate particle growth from the modest amounts of SO2 gas injected by the eruption to high altitudes along with the water (Zhu et al, 2022). MISR observations up to ten days after the eruption are consistent with these model predictions. The possible decrease in stratospheric particle size after initial growth was likely caused by evaporation, as the plume mixed with drier, ambient air. Particles in the lower-elevation plume observed on 1/15 were larger than all the downwind aerosols and contained significant non-spherical (likely ash) particles.

aerosol plume height↗
NASA NTRS2009

Environmental Program

NASA's White Sands Test Facility has six core environmental compliance capabilities: remote hazardous testing of reactive, explosive and toxic materials and fluids; hypergolic fluids materials and systems testing; oxygen materials and system testing; hypervelocity impact testing; flight hardware processing; and, propulsion testing. The facility's permit status and challenges are reviewed. Historic operations and practices dating from the 1960s through the early 1980s resulted in contamination of the facility's groundwater. An environmental restoration effort has been employed to protect public health and the health of the workforce. The restoration seeks to properly handle hazardous materials and waste processes; determine the nature and extent of the contamination; stop the migration of contaminated groundwater; stabilize the plume front which has been assessed as the greatest risk to public health; and, clean-up the environment to restore it to preexisting conditions. The Plume Front Treatment System is operational and seeks to stop the westward movement of the plume to protect drinking water and irrigation well. Specifically, the treatment system will extract contaminated water from the aquifer, remove chemical using the best available technology, and return (inject) the treated water back to the aquifer. The Mid-Plume Interception Treatment System also seeks to stop the migration of containment, as well as to evaluate new technologies to accelerate cleanup, such as bioremediation.

Fischer, Holger↗
NASA NTRS1974

An automated water iodinating subsystem for manned space flight

Controlling microbial growth by injecting iodine (l2) into water supplies is a widely acceptable technique, but requires a specialized injection method for space flight. An electrochemical l2 injection method and l2 level monitor are discussed in this paper, which also describe iodination practices previously used in the manned space program and major l2 biocidal characteristics. The development and design of the injector and monitor are described, and results of subsequent experiments are presented. Also presented are expected vehicle penalties for utilizing the l2 injector in certain space missions, especially the Space Shuttle, and possible injector failure modes and their criticality.

Houck, O. K.↗
NASA NTRS1984

Deep Water Formation

Some simple arguments on plumes of dense water and filling boxes were given. What determines the time for a large-scale environment to be modified by the injection of dense water at its edge is the mass flux, not the buoyancy flux. However, it is the denser buoyancy flux, when there are several competing plumes (e.g., the Mediterranean outflow versus the Denmark Strait outflow) that determines which plume will provide the bottom water for that ocean basin. It was noted that the obvious laboratory experiment (rotate a pie-shaped annulus, and heat/cool it on the surface) had never been performed. Thus, to some extent our belief that deep convection is somehow automatic at high latitudes to close off some ill-defined meridional circulation has never been tested. A summary of deep convection was given. The two fundamental formation mechanisms were shown. Of the two, it is open-ocean convection which forms the water which supplies the Denmark Strait overflow -- in all likelihood, as formation in the Greenland Sea remains stubbornly unobserved. But it is the slope convection which finally creates North Atlantic deep water, following the Denmark Strait overspill.

Killworth, P. D.↗
NASA NTRS1995

Angled injection: Hybrid fluid film bearings for cryogenic applications

A computational bulk-flow analysis for prediction of the force coefficients of hybrid fluid film bearings with angled orifice injection is presented. Past measurements on water-lubricated hybrid bearings with angle orifice injection have demonstrated improved rotordynamic performance with virtual elimination of cross-coupled stiffness coefficients and nul or negative whirl frequency ratios. A simple analysis reveals that the fluid momentum exchange at the orifice discharge produces a pressure rise in the recess which retards the shear flow induced by journal rotation, and consequently, reduces cross-coupling forces. The predictions from the model correlate well with experimental measurements from a radial and 45 deg angled orifice injection, five recess water hybrid bearings (C = 125 microns) operating at 10.2, 17.4, and 24.6 krpm and with nominal supply pressures equal to 4, 5.5, and 7 MPa. An application example for a liquid oxygen six recess/pad hybrid journal bearing shows the advantages of tangential orifice injection on the rotordynamic force coefficients and stability indicator for forward whirl motions and without performance degradation on direct stiffness and damping coefficients. The computer program generated, 'hydrojet,' extends and complements previously developed codes.

SanAndres, Luis↗
NASA NTRS1979

Experimental investigation of the role of thyrocalcitonin in the prophylaxis of disturbances in the water-salt and mineral metabolism during a 30-day hypokinesia

The effect of thyrocalcitonin (TCT) injections on the metabolism of water and electrolytes in free-moving and immobilized chinchilla hares is described. Calcium excretion from immobilized animals was elevated, but normalized in those also receiving TCT injections. TCT also normalized water content and excretion rates.

Shashkov, V. S.↗
NASA NTRS2006

Role of Deep Convection in Establishing the Isotopic Composition of Water Vapor in the Tropical Transition Layer

The transport of H2O and HDO within deep convection is investigated with 3-D large eddy simulations (LES) using bin microphysics. The lofting and sublimation of HDO-rich ice invalidate the Rayleigh fractionation model of isotopologue distribution within deep convection. Bootstrapping the correlation of the ratio of HDO to H2O (deltaD) to water vapor mixing ratio (q(sub v)) through a sequence of convective events produced non-Rayleigh correlations resembling observations. These results support two mechanisms for stratospheric entry. Deep convection can inject air with water vapor of stratospheric character directly into the tropical transition layer (TTL). Alternatively, moister air detraining from convection may be dehydrated via cirrus formation n the TTL to produce stratospheric water vapor. Significant production of subsaturated air in the TTL via convective dehydration is not observed in these simulations, nor is it necessary to resolve the stratospheric isotope paradox.

Smith, Jamison A.↗
NASA NTRSDate not supplied

Coupled Aerosol-Chemistry Simulations of the January 2022 Eruptions of Hunga Tonga-Hunga Ha’apai in the NASA GEOS Earth System Model

The January 2022 eruptions of the underwater Hunga Tonga-Hunga Ha’apai volcano injected more than 100 Tg of water vapor and approximately 0.5 Tg of sulfur dioxide into the stratosphere. Injected materials reached as high as ~55 km in altitude, while the main plume from the eruption travelled west over Australia and the Indian Ocean between about 20 – 30 km altitude. We investigate the transport and the impact of the erupted materials in coupled aerosol-chemistry simulations performed with the NASA Goddard Earth Observing System (GEOS) Earth system model. A sulfur mechanism introduced into the Global Modeling Initiative (GMI) stratospheric-tropospheric chemistry package allows for an interactive simulation of the water vapor-chemistry impacts, and the large water vapor perturbation results in rapid conversion of sulfur dioxide to sulfate aerosol in our aerosol mechanism. We report on the results of a multi-year ensemble of simulations performed with this system that include a control ensemble (no eruption), a water vapor-only injection ensemble, and a water vapor and sulfur dioxide injection ensemble. Simulations of the near-field aerosol and chemistry transport are compared to available measurements from OMPS-LP, OMPS-NM, CALIOP, MLS, and other sensors. The extended impact of the volcanic materials on the stratospheric composition and chemistry over the next several years is further investigated in forecast simulations.

Peter Colarco↗
NASA NTRS1947

Investigation of Thrust Augmentation of a 1600-pound Thrust Centrifugal-flow-type Turbojet Engine by Injection of Refrigerants at Compressor Inlets

Investigations were conducted to determine effectiveness of refrigerants in increasing thrust of turbojet engines. Mixtures of water an alcohol were injected for a range of total flows up to 2.2 lb/sec. Kerosene was injected into inlets covering a range of injected flows up to approximately 30% of normal engine fuel flow. Injection of 2.0 lb/sec of water alone produced an increase in thrust of 35.8% of rate engine conditions and kerosene produced a negligible increase in thrust. Carbon dioxide increased thrust 23.5 percent.

Jones, William L.↗