Search NASA⌕ Search

SEARCH · Search NASA

Results for “acetate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Wettability Alteration with Weak Acid-Assisted Surfactant Flood

Oil-wetness and heterogeneity are two key reasons for low oil recovery by waterflooding in carbonate reservoirs. Surfactants have been effective in altering the oil-wet matrix to a more water-wet condition and initiating spontaneous imbibition. Because it takes time for the surfactant to alter wettability, oil recovery from the tight matrix is slow and sometimes not economically feasible. Acids have the potential of dissolving minerals, which may alter wettability. In this study, the enhanced oil recovery (EOR) performance of an acid-assisted surfactant solution, a novel technique, was evaluated for low-temperature applications. A set of acids and their acetates were tested. Bulk rock-acid reaction, wettability alteration (WA) tests, and spontaneous imbibition measurements were conducted at reservoir temperature (35°C) to identify effective candidates. Coreflood tests were then performed to evaluate the selected acid-surfactant formulations. Before and after a coreflood test, the core was scanned using micro-computed tomography (CT) to investigate pore structure alteration. Bulk reaction measurements showed that weak acids, especially acetic acid (AA), have the desired low reaction rates at 35°C. WA tests showed that AA can remove the crude oil off the rock surface and alter wettability through mineral dissolution. The surfactant can reduce contact angles from 160° to 58°; adding acid into the surfactant can further reduce it to 52°. Spontaneous imbibition experiments showed the synergy between the acid and the surfactant; the AA-surfactant solution had the highest oil recovery (62.6%) among acid-surfactant formulations. The acid improves the WA efficiency by the surfactant through surface mineral dissolution and lower ζ-potential. The imbibition transports the acid-surfactant solutions into the matrix, which minimizes face dissolution. Coreflood tests show that the AA-surfactant flood can increase the oil recovery rate and recover about 8% more oil compared to the surfactant flood. Micro-CT showed that a few mineral particles were transported along the core and partially plugged pore throats, which reduced permeability and diverted flow leading to improved oil recovery. Here, the transport of the acid in reservoirs and the potential plugging issues have to be carefully evaluated in future studies.

58 GEOSCIENCES↗
DOE OSTI2023

Cinnamon essential oil vapor alleviates the reduction of aroma-related volatiles in cold-stored “Feicheng” peach using HS-GC-IMS

“Feicheng” peach is popular for its unique aroma, but its defect of being highly sensitive to chilling injury (CI) often leads to aroma loss and internal browning. Essential oils (EOs) are often used to enhance the antioxidant capacity of plants and fruits, as well as to trigger their defense against biotic/abiotic stresses. This study aimed to examine the effect of cinnamon essential oil (CEO) vapor treatment on the aroma quality of peach fruit during cold storage using HS-GC-IMS. The results showed that 50 μL/L CEO vapor reduced the severity of internal browning (IB) in peaches at the stage of 7 ~ 21 d during refrigeration (Significantly, the L * value was higher and the IB index was lower than that of control, p < 0.05). Meanwhile, the evident reduction or loss of aroma content caused by CI was restored to a higher level than the control ( p < 0.05). Furthermore, CEO treatment promoted the release of aroma-related volatiles as evidenced by more propyl acetate, and the dimer of amyl acetate, isoamyl acetate, butyl acetate detected than that on harvest day and no-treated group after 21 d of cold storage plus 2 d of shelf life. Genes of PpLOX1 , PpLOX2 , PpHPL1 and PpADH1 associated with aroma-related volatile biosynthesis revealed higher transcript abundance in peach fruits treated with CEO than the control ( p < 0.05). Overall, our study demonstrated that CEO in vapor phase may be beneficial to alleviate the quality deterioration in aroma and flesh color of “Feicheng” peaches caused by CI, which lays a theoretical reference for maintaining postharvest quality of peach fruits.

Wang, Dan↗
DOE OSTI2020

The Effect of Acetylation on Iron Uptake and Diffusion in Water Saturated Wood Cell Walls and Implications for Decay

Acetylation is widely used as a wood modification process that protects wood from fungal decay. The mechanisms by which acetylation protects wood are not fully understood. With these experiments, we expand upon the literature and test whether previously observed differences in iron uptake by wood were a result of decreased iron binding capacity or slower diffusion. We measured the concentration of iron in 2 mm thick wood sections at 0, 10, and 20% acetylation as a function of time after exposure to iron solutions. The iron was introduced either strongly chelated with oxalate or weakly chelated with acetate. The concentrations of iron and oxalate in solution were chosen to be similar to those found during brown rot decay, while the concentration of iron and acetate matched previous work. The iron content of oxalate-exposed wood increased only slightly and was complete within an hour, suggesting little absorption and fast diffusion, or only slight surface adsorption. The increase in iron concentration from acetate solutions with time was consistent with Fickian diffusion, with a diffusion coefficient on the order of 10 -16 m 2 s -1 . The rather slow diffusion rate was likely due to significant binding of iron within the wood cell wall. The diffusion coefficient did not depend on the acetylation level; however, the capacity for iron absorption from acetate solution was greatly reduced in the acetylated wood, likely due to the loss of OH groups. We explored several hypotheses that might explain why the diffusion rate appears to be independent of the acetylation level and found none of them convincing. Implications for brown rot decay mechanisms and future research are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Promoting the Selectivity of Pt/m-ZrO 2 Ethanol Steam Reforming Catalysts with K and Rb Dopants

The ethanol steam reforming reaction (ESR) was investigated on unpromoted and potassium- and rubidium-promoted monoclinic zirconia-supported platinum (Pt/m-ZrO 2 ) catalysts. Evidence from in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) characterization indicates that ethanol dissociates to ethoxy species, which undergo oxidative dehydrogenation to acetate followed by acetate decomposition. The acetate decomposition pathway depends on catalyst composition. The decarboxylation pathway tends to produce higher overall hydrogen selectivity and is the most favored route at high alkali loading (2.55 wt.% K and higher or 4.25 wt.% Rb and higher). On the other hand, decarbonylation is a significant route for the undoped catalyst or when a low alkali loading (e.g., 0.85% K or 0.93% Rb) is used, thus lowering the overall H 2 selectivity of the process. Results of in situ DRIFTS and the temperature-programmed reaction of ESR show that alkali doping promotes forward acetate decomposition while exposed metallic sites tend to facilitate decarbonylation. In previous work, 1.8 wt.% Na was found to hinder decarbonylation completely. Due to the fact that 1.8 wt.% Na is atomically equivalent to 3.1 wt.% K and 6.7 wt.% Rb, the results show that less K (2.55% K) or Rb (4.25% Rb) is needed to suppress decarbonylation; that is, more basic cations are more efficient promoters for improving the overall hydrogen selectivity of the ESR process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols

This study outlines a method for producing chemically recyclable crosslinked polyesters using renewable polyols-glycerol and sorbitol-combined with adipic acid (AA), which is transformed/activated into a polyanhydride mixture prior to use. A three-step procedure has been designed: 1) an acid-catalyzed reaction of AA with nontoxic isopropenyl acetate or acetic anhydride to form a crosslinking mixture (CLM) made of adipic-acetic mixed polyanhydrides; 2) a solvent- and additive-free process where glycerol or sorbitol, or a combination thereof, is reacted with the CLM to achieve a prepolymer, and 3) a casting/molding of the liquid viscous prepolymer to yield a thermoset as the end product. Different thermosets (eight examples) are prepared by changing the reagents ratio. These solids are thoroughly characterized by tensile tests, DMA, high-resolution magic angle spinning and solid-state NMR, thermal gravimetric analysis, DSC, and fourier transformed infra red (FT-IR) spectroscopy. The formation of cross-linked polyesters is confirmed in all cases, but mechanical properties varied significantly from one specimen to another. Interestingly, a tensile strength up to 18 MPa-approximately an order of magnitude higher than similar polymers-is achieved when sorbitol and the CLM are used in a 1:1 wt% ratio. The chemical recycle of the resulting polymers is achieved via methanolysis with quantitative recovery of the monomeric units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Temperature-Dependent Communication between Pt/Al 2 O 3 Catalysts and Anatase TiO 2 Dilutant: the Effects of Metal Migration and Carbon Transfer on the Reverse Water–Gas Shift Reaction

In heterogeneous catalysis, unexpected effects from the supposedly inert reactor dilutant are not rare, but related understanding is lacking and inconsistent. Here we report investigations of the impacts of the anatase TiO 2 dilutant on the reverse water-gas shift (rWGS) reaction over Pt/Al 2 O 3 catalysts. Combining detailed kinetic data with microscopic and spectroscopic results, we demonstrate that the catalyst-dilutant communication depends on temperature. At high temperature (400 °C), Pt migrate from Al 2 O 3 to TiO 2 , resulting in higher dispersion and activity, without changing reaction mechanisms. The Pt migration is general to catalysts of different Pt nuclearity and various oxide dilutants. In contrast, at low temperature (250 °C), carboxylic acids (in particular acetic acid) present in the ambient air and adsorbed on TiO 2 are transferred onto Al 2 O 3 in close contact, effectively blocking the formate rWGS pathway. As a result, the rWGS can only proceed through the carboxyl pathway, and hence is significantly slower. The acetate transfer affects catalysts of different Pt nuclearity and support, but is unique to anatase TiO 2 dilutant. As the acetate layer is slowly removed under H 2 or the rWGS stream, the activity recovers. This work elucidates the complicated communication between catalysts and dilutants, which has general implications in heterogeneous catalysis, and resolves inconsistency in related reports in the literature. Finally, the impacts that anatase TiO 2 dilution has on the rWGS also unveil mechanistic understanding that further confirms the two co-existing rWGS pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Metabolic Feedback Inhibition Influences Metabolite Secretion by the Human Gut Symbiont Bacteroides thetaiotaomicron

ABSTRACT Microbial metabolism and trophic interactions between microbes give rise to complex multispecies communities in microbe-host systems. Bacteroides thetaiotaomicron ( B. theta ) is a human gut symbiont thought to play an important role in maintaining host health. Untargeted nuclear magnetic resonance metabolomics revealed B. theta secretes specific organic acids and amino acids in defined minimal medium. Physiological concentrations of acetate and formate found in the human intestinal tract were shown to cause dose-dependent changes in secretion of metabolites known to play roles in host nutrition and pathogenesis. While secretion fluxes varied, biomass yield was unchanged, suggesting feedback inhibition does not affect metabolic bioenergetics but instead redirects carbon and energy to CO 2 and H 2 . Flux balance analysis modeling showed increased flux through CO 2 -producing reactions under glucose-limiting growth conditions. The metabolic dynamics observed for B. theta , a keystone symbiont organism, underscores the need for metabolic modeling to complement genomic predictions of microbial metabolism to infer mechanisms of microbe-microbe and microbe-host interactions. IMPORTANCE Bacteroides is a highly abundant taxon in the human gut, and Bacteroides thetaiotaomicron ( B. theta ) is a ubiquitous human symbiont that colonizes the host early in development and persists throughout its life span. The phenotypic plasticity of keystone organisms such as B. theta is important to understand in order to predict phenotype(s) and metabolic interactions under changing nutrient conditions such as those that occur in complex gut communities. Our study shows B. theta prioritizes energy conservation and suppresses secretion of “overflow metabolites” such as organic acids and amino acids when concentrations of acetate are high. Secreted metabolites, especially amino acids, can be a source of nutrients or signals for the host or other microbes in the community. Our study suggests that when metabolically stressed by acetate, B. theta stops sharing with its ecological partners.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Porewater data across a catena in the Luquillo Experimental Forest, Puerto Rico.

Landscape topography can influence biogeochemical processes in wet tropical forest soils. This dataset contains porewater concentrations of organic acid (acetate) from 2018 (February 22 to November 14) across a catena in the Luquillo Experimental Forest (LEF), Puerto Rico. The attached CSV file contains information on sampling date, location (El Verde field station) in LEF, topographic positions (ridge, slope, and valley, respectively), depth (unit: cm), and acetate concentration (unit: µM). Porewater concentrations of acetate were lower in the valley as compared to the ridge and slope topographic positions. This dataset can facilitate our understanding of the biogeochemical cycling of carbon and nutrient associated with complex topography in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Zero-Carbon Biofuels: An Optimized Two-Stage System for High Productivity Conversion of CO2 to Liquid Fuels

In MIT’s Zero-Carbon Biofuels work, under ARPAe’s EcoSynBio funding, we capitalized on our previously developed technology of the oleaginous yeast, Yarrowia lipolytica, engineered to produce high titer biodiesel-like lipids and alkanes, and set out to reduce or eliminate CO 2 generation during lipid production. We set out to do this by both engineering Y. lipolytica with the necessary enzymes to allow the generation of reducing equivalents from H 2 , formic acid, or methanol, and, in parallel, installing the non-oxidative glycolysis (NOG) pathway. The goal was that combination of these two would enable stoichiometric conversion of glucose and acetate to biodiesel products. Furthermore, our ARPAe Electrofuels funded research, yielded a very innovative two-stage system where gases comprising CO 2 and H 2 are used for the production of liquid fuels. Acetate is produced from CO 2 and H 2 , via acetogenic fermentation, in the first stage as the intermediary product, then fed to Y. lipolytica in the second stage, for conversion to lipids and alkanes. To increase the commercial competitiveness of the two-stage system, by improvement to the overall productivity, we recently showed that synergistic substrate co-feeding drastically enhances CO 2 fixation rates and set out to explore additional co-substrate pairs, including methanol and formic acid, in order to maximize acetate productivity. Finally, given the attractiveness as a biofuel, we also set out to attempt an important increase in the production of alkanes over lipids in Yarrowia.

10 SYNTHETIC FUELS↗
DOE OSTI2021

Fischer-Tropsch Synthesis: The Characterization and Testing of Pt-Co/SiO 2 Catalysts Prepared with Alternative Cobalt Precursors

Different low-cost cobalt precursors (acetate, chloride) and thermal treatments (air calcination/H 2 reduction versus direct H 2 -activation) were investigated to alter the interaction between cobalt and silica. H 2 -activated catalysts prepared from cobalt chloride had large Co 0 particles (XRD, chemisorption) formed by weak interactions between cobalt chloride and silica (temperature programmed reduction (TPR), TPR with mass spectrometry (TPR-MS), TPR with extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge spectroscopy (XANES) techniques) and retained Cl-blocked active sites, resulting in poor activity. In contrast, unpromoted Co/SiO 2 catalysts derived from cobalt acetate had strong interactions between Co species and silica (TPR/TPR-MS, TPR-EXAFS/XANES); adding Pt increased the extent of the Co reduction. For these Pt-promoted catalysts, the reduction of uncalcined catalysts was faster, resulting in larger Co 0 clusters (19.5 nm) in comparison with the air-calcined/H 2 -activated catalyst (7.8 nm). Both catalysts had CO conversions 25% higher than that of the Pt-promoted catalyst prepared in the traditional manner (air calcination/H 2 reduction using cobalt nitrate) and three times higher than that of the traditional unpromoted Co/silica catalyst. The retention of residual cobalt carbide (observed in XANES) from cobalt acetate decomposition impacted performance, resulting in a higher C 1 –C 4 selectivity (32.2% for air-calcined and 38.7% for uncalcined) than that of traditional catalysts (17.5–18.6%). The residual carbide also lowered the α-value and olefin/paraffin ratio. Future work will focus on improving selectivity through oxidation–reduction cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Ionic Strength and Anion Identity on Rare‐Earth Element Chelation by Poly(acrylic acid)

Abstract Rare‐earth elements (REEs) are critical components of many modern technologies, but their efficient separation and purification continue to pose significant challenges. Metal‐binding polymers may enable the development of promising alternative approaches to conventional separation techniques (e.g., solvent extraction), and insights into the interactions between the metal ions and polymers in solution are crucial to such development. In this work, the effect of ionic strength on the chelation of REEs by poly(acrylic acid) is investigated using isothermal titration calorimetry (ITC) to measure the metal‐binding thermodynamics. ITC experiments revealed that when ionic strength increases from increasing the sodium acetate buffer strength, polymer‐REE binding becomes increasingly disfavored. However, when ionic strength is increased by the addition of sodium chloride, binding again becomes increasingly disfavored, but to a lesser extent than when ionic strength increases from increasing the buffer strength. Additionally, the reduction in binding affinity is enthalpically driven when ionic strength is raised with sodium chloride, while it is entropically driven when raised with sodium acetate buffer, suggesting competive binding by the acetate ions. These results highlight the importance of ionic strength in polymer‐metal binding thermodynamics and will guide the development of new processes for the purification of critical metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Drivers for the cracking of multilayer polyamide‐based backsheets in field photovoltaic modules: In‐depth degradation mapping analysis

Abstract There is a lack of understanding on the root cause of cracking of photovoltaic (PV) backsheets due to the challenge of multilayer characterization and the complicated failure modes at the submodule level. In this work, the in‐depth degradation mapping of field‐exposed polyamide‐based (PA‐based) PV module backsheets was studied, with the major focus on the identification of underlying drivers for the through cracking (in between the solar cells). PV modules were retrieved from five different locations, comprising a variety of climates, including humid subtropical, hot‐summer Mediterranean, tropical savanna climate, and hot arid. A suite of microscale cross‐sectional characterizations, including chemical changes, fluorescence intensity, and modulus as a function of distance from the air surface of the backsheet, was performed. Results showed more advanced signs of degradation of the inner layer than the outer layer in the cracking region. Increases in the modulus were identified as the major indicator for the cracking. Moreover, a rudimentary test by immersion in acetic acid, which forms during photodegradation of the ethylene‐vinyl acetate copolymer (EVA) encapsulant, showed the first‐time direct evidence that acetic acid can largely accelerate the chemical degradation and facilitate the cracking of PA inner layer. This study suggests that the field cracking of PA‐based backsheet can be attributed to the combined effects of chemical degradation and physical reorganization (chemi‐crystallization) under cyclic thermomechanical stresses. Therefore, it is important to consider effects of local microclimates and interlayer infection to understand the heterogeneous nature of backsheet failures.

Lyu, Yadong↗
DOE OSTI2025

Effect of CO on alcohol oxidation over commercial oxidation catalysts for control of emissions from lean-burn engines

For commercialization, alcohol-based net-zero carbon fuels in diesel-driven internal combustion engines must meet emissions standards set by the U.S. Environmental Protection Agency. Here, a series of aged commercial oxidation catalysts, Pt diesel oxidation catalyst (DOC), Pd+Pt DOC, and Pt oxidation catalyst (Pt OC), were studied using an automated flow reactor and in situ DRIFTS techniques to investigate the impact of CO on alcohol oxidation. Surface formate and acetate intermediates were formed due to partial oxidation of methanol and ethanol, respectively. Sequential introduction of alcohol and CO experiments using in situ DRIFTS on all three catalysts showed that CO inhibited low temperature methanol oxidation. Mutual inhibition effects between CO and ethanol were observed during co-oxidation. Acetate species shifted CO oxidation to higher temperatures on Pt DOC and Pt OC, whereas CO pre-exposure inhibited acetate formation. CO oxidation occurred at lower temperatures during ethanol and CO co-oxidation on Pd+Pt DOC.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Chemical-free production of multiple high-value bioproducts from metabolically engineered transgenic sugarcane ‘oilcane’ bagasse and their recovery using nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value- added bioproducts. The study utilizes recently developed transgenic sugarcane (‘oilcane’) bagasse for chemical- free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210°C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF mem- brane rejected ~99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ~ 86% furfurals. Furthermore, the work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2023

Formation of hydrocarbons favored by high pressure at subduction zone conditions

Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Stable electrospray signal on a microfabricated glass chip with three-dimensional open edge and tiered depth geometries

This paper presents the microfabrication and performance of a three-dimensional electrospray ionization (ESI) emitter tip made from glass, which achieves stable current signals important for chemical analysis. Our novel microfabrication process and custom-built signal conditioning hardware provides the advantage of providing accurate features and steady signals. The fabrication process relies on standard microfabrication techniques (i.e., deposition, photolithography, and wet etching). This fabrication method involves the novel application of two layers of positive and negative photoresists in addition to Parafilm® wax tape. Open edge and tiered depth details were successfully created from a multilayer planar mask. This is a benefit for integrated miniaturized and microfluidic systems that often require micro features for their functionality but relatively large millimeter size features for their physical periphery. We demonstrate the fundamental performance of electrospray with this microfluidic chip. The emitter tip was fixed on a linear axis stage with high resolution (10 μm) to finely control the tip distance from a metal counter electrode plate. Further, a custom printed circuit board system was built to safely control four voltages applied to the microchip ports from a single high voltage power supply. To readily form the electrospray, non-aqueous solvents were used for their low viscosity and a constant voltage of +2.7 kV was applied to the sheath electrospray microchannel. The liquid being sprayed was 80/20 (v/v) methanol/acetonitrile with 0.1% acetic acid in the sheath microchannel and with ammonium acetate (10–40 mM) in its remaining microchannels. The electrospray signal was measured in response to varying the distance (1.4 to 1.6mm) between the electrospray emitter tip and a metal counter electrode plate in addition to the varying concentration of the background electrolyte, ammonium acetate. Stable and repeatable electrospray signal showed linear relationships with emitter tip distance and concentration (r 2 ≥ 0.95).

42 ENGINEERING↗
DOE OSTI2025

Single and Dual-Solute Transport in Quaternary Ammonium-Functionalized Anion Exchange Membranes: Isolating the Impact of Water Volume Fraction

Membranes are essential components of photoelectrochemical CO 2 reduction cells (PEC-CRC), as they regulate solute transport and impact device efficiency. These cells are a promising approach for converting carbon dioxide into valuable chemicals. However, electrochemical reactions involve not just a single electrolyte; membrane transport typically includes multiple electrolytes. When a mixture of solutes is present, the presence of one solute in the membrane can impact the diffusion and sorption of other solutes. In complex systems where multiple solutes are diffusing simultaneously through a hydrated, dense polymer membrane, the resulting transport behavior is poorly understood. This study highlights the individual and two solute transport behavior of potassium formate, acetate, and bicarbonate ions in neutral membranes and quaternary ammonium-functionalized anion exchange membranes (AEMs) based on phenyl acrylate polymer backbones. By isolating the effect of water content, we emphasize how fixed charge density and solute-membrane interactions influence transport behavior. In neutral membranes, the diffusivity follows the order of potassium formate > potassium acetate > potassium bicarbonate. However, in AEMs, the order shifts due to changes in ion-membrane interactions, with potassium bicarbonate diffusivity surpassing that of potassium acetate. These results underscore the importance of ion exchange membranes and ion-membrane interaction in modulating transport properties, providing valuable insights for optimizing membranes in electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗