Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis automation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Range Hood Use and Effectiveness in Reducing Indoor Air Pollution During Gas and Induction Cooking

The Cooking Energy and Ventilation Impacts on Children's Asthma (CEVICA) study measured cooking frequency, range hood use, indoor air quality and respiratory health indicators of children with asthma living in homes with gas stoves in California's San Joaquin Valley. The study installed electric induction stoves and repeated measurements over three 2-week intensive periods, at baseline and at the end of two consecutive 3-month study phases. Stove replacements occurred at the start of Phase 1 or Phase 2 by random assignment. There were 4184 cooking events identified by automated analysis of time-series data from temperature sensors mounted above the cooktops and 1038 related range hood usage events detected from data recorded by anemometers, smart plugs, or motor loggers. Analysis of 1-minute resolved PM2.5 and NO 2 data identified and quantified 2685 PM 2.5 events and 2606 NO 2 events. Range hood use was characterized as a binary variable (>3 min vs. <3 min use). Range hood use was more common during cooking events associated with particle emissions and longer cooking durations. PM 2.5 concentrations during events with range hood use were comparable to those without use, which could result from limited effectiveness or if range hoods were preferentially used during higher-emission cooking scenarios. In homes with gas cooking, integrated NO 2 concentrations were about 45 percent higher during cooking events with no range hood use compared to those range hood use. The lowest pollutant levels were observed when the range hood operated for more than half of the cooking duration. These findings show that operation of venting range hood during cooking can substantially reduce short-term indoor exposure NO 2 in homes with gas cooking.

Fang, Yi↗
DOE OSTI2021

Evaluation of overtime phenotypic variation of yeasts in chronic vulvovaginal candidosis cases

Abstract Chronic vulvovaginal candidosis results either from reinfection or from the ability of Candida spp. to persist in the vulva and/or vagina. Persistence is usually associated with increased antifungal (mainly azoles) resistance rates, which can explain treatment failure, and/or increased expression of virulence factors by Candida spp. The aim of this study was to assess the mechanisms leading to Candida spp persistence, by studying sequential isolates from women with chronic vulvovaginal candidosis, focusing on strains genotypes, azole resistance, and ability to form biofilms along the period of clinical evaluation. The strains were identified at species level by automated analysis of biochemical profiles and molecular typing evaluated by polymorphic DNA analysis. The capacity to form biofilm was assessed with a microtiter plate assay. Fluconazole susceptibility was determined by the microdilution broth assay at both pH 7 (following the recommended guideline) and pH 4.5 (as representative of vaginal pH). We studied samples from 17 clinically recurrent cases. In 53% of the chronic cases there were two or more isolates that had a phylogenetic relationship while the remaining (47%) were caused by different species. In those cases where related strains were involved in recurrence, we verified an increase in MIC at pH 7 and also an increased capacity to form biofilms over time. Significant correlation between these two parameters was observed only in cases caused by C. glabrata, evidencing the importance of these two factors to enhance persistence in the vaginal mucosa for this particular species.

Faria-Gonçalves, Paula↗
DOE OSTI2025

Breaking the barrier of human-annotated training data for machine learning-aided plant research using aerial imagery

Machine learning (ML) can accelerate biological research. However, the adoption of such tools to facilitate phenotyping based on sensor data has been limited by (i) the need for a large amount of human-annotated training data for each context in which the tool is used and (ii) phenotypes varying across contexts defined in terms of genetics and environment. This is a major bottleneck because acquiring training data is generally costly and time-consuming. This study demonstrates how a ML approach can address these challenges by minimizing the amount of human supervision needed for tool building. A case study was performed to compare ML approaches that examine images collected by an uncrewed aerial vehicle to determine the presence/absence of panicles (i.e. “heading”) across thousands of field plots containing genetically diverse breeding populations of 2 Miscanthus species. Automated analysis of aerial imagery enabled the identification of heading approximately 9 times faster than in-field visual inspection by humans. Leveraging an Efficiently Supervised Generative Adversarial Network (ESGAN) learning strategy reduced the requirement for human-annotated data by 1 to 2 orders of magnitude compared to traditional, fully supervised learning approaches. The ESGAN model learned the salient features of the data set by using thousands of unlabeled images to inform the discriminative ability of a classifier so that it required minimal human-labeled training data. This method can accelerate the phenotyping of heading date as a measure of flowering time in Miscanthus across diverse contexts (e.g. in multistate trials) and opens avenues to promote the broad adoption of ML tools.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Benchtop Autonomous Electrochemical Characterization System for Combinatorial Thin-Film Solid Oxide Electrodes

The design of materials for electrochemical energy conversion is complicated by a vast search space of candidate materials and multifaceted property requirements: multicarrier conductivity, stability, and catalytic activity are all necessary but rarely intersect. Although self-driving laboratories are rapidly rising to address such material optimization problems, the required infrastructure for integrated, large-scale robotic facilities can be cost-prohibitive. Here we develop and evaluate a closed-loop measurement system for efficient screening of proton-conducting oxide electrodes for ceramic fuel cells and electrolyzers, building on top of an existing benchtop instrument and integrating techniques for rapid impedance measurement and automated analysis. This system exemplifies a “minimum viable” self-driving implementation that can deliver substantial benefits with relatively simple infrastructure. Combinatorial thin-film microelectrode libraries are characterized with a recently developed joint time-domain and frequency-domain impedance measurement technique, which provides an order-of-magnitude acceleration relative to conventional impedance spectroscopy. The distribution of relaxation times is extracted from impedance data and analyzed without human intervention. These results feed an active learning and Bayesian optimization process that learns to predict electrochemical impedance as a function of material composition, measurement temperature, oxygen partial pressure, and electrical bias, which further reduces the screening time by tenfold with optimized experimental sequences. We apply this system to Ba⁡(Co,Fe,Zr,Y)⁢O 3−𝛿 combinatorial libraries and evaluate its effectiveness for learning material property trends and optimizing expensive-to-evaluate properties such as activation energy. This offers insights into key methodological aspects of practical autonomous experimentation, including surrogate model validation, cost-aware acquisition functions, and high-throughput data interpretation. Our results demonstrate the efficacy of the system for rapidly gathering information, but also highlight real-world experimental challenges of thin-film degradation and numerical instability in surrogate models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of image resolution on automated classification of chest X-rays

Deep learning (DL) models have received much attention lately for their ability to achieve expert-level performance on the accurate automated analysis of chest X-rays (CXRs). Recently available public CXR datasets include high resolution images, but state-of-the-art models are trained on reduced size images due to limitations on graphics processing unit memory and training time. As computing hardware continues to advance, it has become feasible to train deep convolutional neural networks on high-resolution images without sacrificing detail by downscaling. This study examines the effect of increased resolution on CXR classification performance. We used the publicly available MIMIC-CXR-JPG dataset, comprising 377,110 high resolution CXR images for this study. We applied image downscaling from native resolution to 2048 × 2048 pixels, 1024 × 1024 pixels, 512 × 512 pixels, and 256 × 256 pixels and then we used the DenseNet121 and EfficientNet-B4 DL models to evaluate clinical task performance using these four downscaled image resolutions. We find that while some clinical findings are more reliably labeled using high resolutions, many other findings are actually labeled better using downscaled inputs. We qualitatively verify that tasks requiring a large receptive field are better suited to downscaled low resolution input images, by inspecting effective receptive fields and class activation maps of trained models. Lastly, we show that stacking an ensemble across resolutions outperforms each individual learner at all input resolutions while providing interpretable scale weights, indicating that diverse information is extracted across resolutions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

pixelvar79/ESGAN-Flowering-Detection-paper

Machine learning (ML) can accelerate biological research. However, the adoption of such tools to facilitate phenotyping based on sensor data has been limited by (i) the need for a large amount of human-annotated training data for each context in which the tool is used and (ii) phenotypes varying across contexts defined in terms of genetics and environment. This is a major bottleneck because acquiring training data is generally costly and time-consuming. This study demonstrates how a ML approach can address these challenges by minimizing the amount of human supervision needed for tool building. A case study was performed to compare ML approaches that examine images collected by an uncrewed aerial vehicle to determine the presence/absence of panicles (i.e. “heading”) across thousands of field plots containing genetically diverse breeding populations of 2 Miscanthus species. Automated analysis of aerial imagery enabled the identification of heading approximately 9 times faster than in-field visual inspection by humans. Leveraging an Efficiently Supervised Generative Adversarial Network (ESGAN) learning strategy reduced the requirement for human-annotated data by 1 to 2 orders of magnitude compared to traditional, fully supervised learning approaches. The ESGAN model learned the salient features of the data set by using thousands of unlabeled images to inform the discriminative ability of a classifier so that it required minimal human-labeled training data. This method can accelerate the phenotyping of heading date as a measure of flowering time in Miscanthus across diverse contexts (e.g. in multistate trials) and opens avenues to promote the broad adoption of ML tools.

Varela, Sebastian↗
DOE OSTI2024

Application of a Prize Mechanism to Address Data Utilization Challenges at Utilities

The electric industry sector is facing an “explosion” of data from a variety of sources. Electric sector stakeholders need to define how to capitalize on large datasets, both those they create and those from other sources (like data on weather, buildings, electric vehicles, etc.), to improve reliability and resilience and meet the changing system dynamics from renewable integration. For the electricity sector to fully utilize these vast new datasets, it must undergo a transformation in how it manages data quality, storage, and processing. The U.S. Department of Energy (DOE) Office of Electricity (OE) is committed to accelerating research, development, and demonstration of new technologies and tools within the electricity sector to advance reliability, resilience, and affordable operation of the power system. Through the prize mechanism, OE identified two widespread data-related challenges for utilities—load modeling and data analysis automation—and offered an opportunity for utilities and teams of software engineers to identify additional challenges faced by utilities. After completing one round of the American-Made Digitizing Utilities Prize, OE, the National Renewable Energy Laboratory (NREL) as the prize administrator, and Pacific Northwest National Laboratory (PNNL) as the domain experts have compiled the results and lessons learned to feed into the second round of the prize.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Abbreviated Report for 25-FS-011: Switch and Stitch Similar Subgraph Synthesizer

Government institutions utilize software from a wide array of development sources, including those written by large software companies, government contractors, and open-source repositories. Avoiding installation of malicious software components is an important national security endeavor. Automated analysis of previously unseen software is an active research area, and there is much research in the design of systems that compare new software artifacts to a large set of previously seen software records organized by various behaviors they contain. One attractive approach is to turn each compiled software binary into a graph representation and apply a graph similarity model that scores pairs of binaries by their relative similarity. When a pair is deemed similar, it is useful to know why, in the sense of providing explanations to security analysts regarding which portions of the software they should look into further.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Evaluation of Damage in Medium Voltage Cable Using Machine Learning

Developments in cable test instrumentation coupled with artificial intelligence and machine learning (ML) to aid in interpretation of cable test signals supports the feasibility for automated analysis of reflectometry tests for low voltage power cables. This work seeks to leverage prior ML work and success for low voltage cables to evaluate potential application to medium voltage (2kV to 10kV) installations. The Accelerated and Real-Time Environmental Nodal Assessment (ARENA) Cable Motor Test Bed at Pacific Northwest National Laboratory (PNNL) was used to test a medium voltage cable with several types of damage including thermal aging and low resistance conductor-to-shield faults. The cable was tested using an inductive clamshell coupler to protect the test instruments from the energized cable voltages that would damage the test instruments if coupled directly to the energized conductor.

42 ENGINEERING↗
DOE OSTI2026

Livewire Data Platform File Standards Version 1.0

This living document describes required and recommended standards for data additions to the Livewire Data Platform (https://livewire.energy.gov/). Adherence to the standards described enables development of automated analysis and discovery tools for Livewire data and will facilitate development of future capabilities for delivering data that can be tailored to meet user needs.

33 - ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1973

Structural technologies - Systems challenges and NASA thrusts.

Some significant areas of emphasis in the NASA airframes structures program are highlighted. The topics treated include automated analysis and design processes, building confidence in advanced composites, improving the technology base for future supersonic and hypersonic vehicles, validation of concepts for active control systems, development of predictive methods for aircraft loads and aeroelasticity, and generation of methodology to assure structural integrity as a part of the design process. An integrated long-range program for fatigue and fracture is recommended.

Brooks, G. W.↗
NASA NTRS1975

Utilization of LANDSAT data for water quality surveys in the Choptank River

Computer processing of LANDSAT-1 multispectral digital data demonstrated the applicability of remotely sensed data to water quality survey in the Choptank River. Water classes derived by automated analysis correlate to river nuisance levels of chlorophyll a and sediment loading as defined by the Maryland Department of Water Resources and the U.S. Corps of Engineers. Results indicate that an increase in chlorophyll a concentration corresponds, relative to MSS 5, to decreases in 4 and increases in 6 relative to the trends with increasing sediment load. It appears that for the purpose of water quality analysis, under favorable atmospheric conditions, only MSS 4, 5 and 6 are necessary.

Johnson, J. M.↗
NASA NTRS1976

Variability of wetland reflectance and its effect on automatic catergorization of satellite imagery

The author has identified the following significant results. A technique for training automated analysis of satellite multispectral data based on in situ measurements of target reflectance was tested and applied in delineating cover communities in Delaware's tidal wetlands. Land cover categorization of data from the same overpass in four test wetland areas was carried out using a four category classification system. The tests indicate that training data based on in situ reflectance measurements and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more conventional relative radiance training. Analysis of the four wetlands cover categories (salt marsh cordgrass, salt hay, water, and unvegetated tidal flat) produced average categorization accuracies of 82.1% by conventional relative radiance training and 81.4% by use of in situ reflectance measurements.

Klemas, V.↗
NASA NTRS1978

Rapid measurement of bacteria in water

Automated analysis system detects bacteria in saltwater, freshwater, sewage effluent, and other aqueous media. System may be adapted for computer control.

Chappelle, E.↗
NASA NTRS1980

Data reduction by computer processing

The automated analysis of remote sensing data, specifically digital processing of LANDSAT or other image data in numerical form was considered in a technical workshop which covered the teaching of digital image processing, including both theoretical and applied subjects and laboratory experience, and also reviewed NASA developed image processing software, and hardware/software systems employed at NASA-Ames Research Center in support of the Western Regional Applications Program (WRAP). A course titled Image Processing Lab, one of two courses required for a graduate minor in remote sensing at Arizona is examined as well as the rationale, content, and hardware/software support for this course.

Lumb, D. R.↗
NASA NTRS1982

Short-Circuited Power Networks

NASA computer program automatically analyzes power-system networks under faulted conditions. Program is general enough to calculate single-line to ground faults and three-phase-to-ground faults. Several novel programing techniques automate analysis while reducing computing time and storage requirements. Program is written in FORTRAN IV for batch execution.

Oepomo, T. S.↗
NASA NTRS1981

Some considerations in low-cost image processing on a university main frame: The Penn State (ORSER) experience

The ORSER System as implemented on the Penn State University Computation Center's IBM main frame is an exceptionally useful mechanism for instructing the present and future remote sensing community in the theory and practice of automated analysis of digitized data. From its beginning, the system was used as the hands-on back-bone of a graduate level "Multispectral Remote Sensing" one-term course taught annually in the School of Forest Resources. It was also used at the end of a senior-level undergraduate "Introduction to Remote Sensing" course, and in teaching a variety of short courses, ranging in length from a few days for small groups of remote sensing consultants with specific application interests, to a 2-week course oganized by NASA for regional and urban planners who had little or no previous exposure to remote sensing. Because of its modular construction, the ORSER is suitable for all classes of remote sensing users. Although in a beginning course only 6 to 10 of the programs are generally used, the researcher has a set of about 35 programs available for his analyses.

Turner, B. J.↗
NASA NTRS1983

Design of the hybrid automated reliability predictor

The design of the Hybrid Automated Reliability Predictor (HARP), now under development at Duke University, is presented. The HARP approach to reliability prediction is characterized by a decomposition of the overall model into fault-occurrence and fault-handling sub-models. The fault-occurrence model is a non-homogeneous Markov chain which is solved analytically, while the fault-handling model is a Petri Net which is simulated. HARP provides automated analysis of sensitivity to uncertainties in the input parameters and in the initial state specifications. It then produces a predicted reliability band as a function of mission time, as well as estimates of the improvement (narrowing of the band) to be gained by a specified amount of reduction in uncertainty.

Geist, R.↗