Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous reprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

On-Line Monitoring for Control and Safeguarding of Radiochemical Streams at Spent Fuel Reprocessing Plant

There is a renewed interest worldwide to promote the use of nuclear power and close the nuclear fuel cycle. The long term successful use of nuclear power is critically dependent upon adequate and safe processing and disposition of the spent nuclear fuel Liquid-liquid extraction is a separation technique commonly employed for the processing of the dissolved spent nuclear fuel. Our approach is based on prerequisite that real time monitoring of the solvent extraction flowsheets provides unique capability to quickly detect unwanted manipulations with fissile isotopes present in the radiochemical streams during reprocessing activities. The instrumentation used to monitor these processes must be robust, require little or no maintenance, and be able to withstand harsh environments such as high radiation fields and aggressive chemical matrices. In addition, the ability for continuous on-line monitoring allows for numerous benefits. Our team experimentally assessed the potential of Raman and vis-NIR spectrophotometric techniques for on-line real-time monitoring of the U(VI)/nitrate ion/nitric acid and Pu(IV)/Np(V)/Nd(III), respectively, in solutions relevant to spent fuel reprocessing. Both techniques demonstrated robust performance in the repetitive batch measurements of each analyte in a wide concentration range using simulant and commercial dissolved spent fuel solutions. Static spectroscopic measurements served as training sets for the multivariate data analysis to obtain partial least squares predictive models, which were validated using on-line centrifugal contactor extraction tests. The corresponding spectrometers used under the laboratory conditions are easily convertible to the process-friendly configurations allowing remote measurements under the flow conditions. A fiber optic Raman probe allows monitoring of the high concentration species encountered in both aqueous and organic phases within the PUREX suite of flowsheets, including metal oxide ions, such as uranyl, components of the organic solvent, inorganic oxo-anions, and water. The actinides and lanthanides are monitored remotely by UV-vis-NIR spectroscopy in aqueous and organic phases. This paper summarizes our methodology and shows results of specific examples.

Bryan, Samuel A↗

Contaminant Release from Residual Waste in Single Shell Tanks at the Hanford Site, Washington, USA - 9276

Determinations of elemental and solid-phase compositions, and contaminant release studies have been applied in an ongoing study of residual tank wastes (i.e., waste remaining after final retrieval operations) from five of 149 underground single-shell storage tanks (241-C-103, 241-C-106, 241-C-202, 241-C-203, and 241-S-112) at the U.S. Department of Energy’s Hanford Site in Washington State. This work is being conducted to support performance assessments that will be required to evaluate long-term health and safety risks associated with tank site closure. The results of studies completed to date show significant variability in the compositions, solid phase properties, and contaminant release characteristics from these residual tank wastes. This variability is the result of differences in waste chemistry/composition of wastes produced from several different spent fuel reprocessing schemes, subsequent waste reprocessing to remove certain target constituents, tank farm operations that concentrated wastes and mixed wastes between tanks, and differences in retrieval processes used to remove the wastes from the tanks. Release models were developed based upon results of chemical characterization of the bulk residual waste, solid-phase characterization (see companion paper 9277 by Krupka et al.), leaching and extraction experiments, and geochemical modeling. In most cases empirical release models were required to describe contaminant release from these wastes. Release of contaminants from residual waste was frequently found to be controlled by the solubility of phases that could not be identified and/or for which thermodynamic data and/or dissolution rates have not been measured. For example, significant fractions of Tc-99, I-129, and Cr appear to be coprecipitated at trace concentrations in metal oxide phases that could not be identified unambiguously. In the case of U release from tank 241-C-103 residual waste, geochemical calculations indicated that leachate concentrations of U were likely controlled by the solubility of schoepite (UO3•2H2O). Therefore, a reactive transport model based upon solubility of schoepite and the expected composition and infiltration rates of pore water could be used to simulate future release of U from this residual tank waste. In addition to the development of release models, the residual tank waste studies completed so far have provided a number of new insights that have changed our understanding of residual tank waste. For example, the release of contaminants from different tanks, although governed by the same general chemical principles, can be very different. It has also been found that significant fractions of Tc-99 and other typically highly mobile contaminants are frequently not readily released from tank residuals and occur in recalcitrant phases that are resistant to aqueous dissolution. As these studies progress, such key cross-cutting geochemical processes and solid phase characteristics important to contaminant release from residual tank waste are becoming apparent. This may allow the grouping of tanks into general categories with certain common chemical features and contaminant release characteristics – an important goal because complete characterization of residual wastes from all 149 single-shell storage tanks is not practical.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Current Needs in Radiochemistry

There are a number of current needs in the development of the Pu and Am separations that underpin larger interest areas including nuclear waste issues, nuclear weapons, nuclear forensics, nuclear fuels and similarly related fields. In the large areas of interest, there are a number of sub-fields that include corrosion chemistry, pyrochemistry, solution-phase chemistry, rapid separations, environmental speciation, and other similar efforts. However, in all of the these fields it is important to realize that the underlying chemistry that underpins these efforts is similar in that Pu and Am are bound to ligands that can be in the solid, aqueous, or gas phase and separations occurs due to the preferential binding of the ligand to Pu or Am based on a number of factors that include pH, concentration, oxidation state, etc. In the past, most of the Pu and Am chemistry has occurred in limited scope within universities where micro-scale and bench-top scale chemistry are the dominate investigative theme. At US national laboratory and their international counterparts, larger scale reactions have been attempted such that industrial scale chemistry has been completed. Some of this technology has been harnessed in radiopharmaceuticals and nuclear fuel reprocessing. However, such bench-top research is expensive to due to the safety and security that is concerned when dealing with Pu, and scale-up of reactions is even more resource intensive. In an effort to offset this expensive, it would be of interest to explore the ability to predict selectivity based on the computational modeling of actinide chemistry. This has historically been limited by the abilities of large supercomputers, but with the emphasis on developing exascale computers within the US and similar efforts by other countries this predictive modeling has potential to produce significant results that would yield improved understanding of actinide chemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Electrochemical Manipulation and Radiolytic Evaluation of Organic Phase Neptunium

Post for LDRD Annual Poster Session Under envisioned used nuclear fuel reprocessing conditions, neptunium (Np) is present in a mixture of extractable Np(IV)/Np(VI) and inextractable Np(V) species, the distribution of which is dependent on several factors that lead to the unintentional partitioning of Np into various phases and product streams, reducing process and cost efficiency. With this in mind, we tested an innovative approach to precisely control the oxidation state distribution of Np using novel, high surface area, optically transparent, ligand modified tin-doped indium oxide electrodes (LMEs). These proof-of-concept experiments employed a variety of radiation and electrochemistry (echem) techniques to determine: electrode radiation stability; aqueous echem behavior of Np at nITO|P3 electrode surfaces; radiation-induced Np-extractant reaction kinetics; and non-aqueous echem of Np in diethylhexyl butyramide (DEHBA) solutions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Deep Bed Iodine Sorbent Testing FY 2011 Report

Nuclear fission results in the production of fission products (FPs) and activation products that increasingly interfere with the fission process as their concentrations increase. Some of these fission and activation products tend to evolve in gaseous species during used nuclear fuel reprocessing. Analyses have shown that I129, due to its radioactivity, high potential mobility in the environment, and high longevity (half life of 15.7 million years), can require control efficiencies of up to 1,000x or higher to meet regulatory emission limits. Deep-bed iodine sorption testing has been done to evaluate the performance of solid sorbents for capturing iodine in off-gas streams from nuclear fuel reprocessing plants. The objectives of the FY 2011 deep bed iodine sorbent testing are: (1) Evaluate sorbents for iodine capture under various conditions of gas compositions and operating temperature (determine sorption efficiencies, capacities, and mass transfer zone depths); and (2) Generate data for dynamic iodine sorption modeling. Three tests performed this fiscal year on silver zeolite light phase (AgZ-LP) sorbent are reported here. Additional tests are still in progress and can be reported in a revision of this report or a future report. Testing was somewhat delayed and limited this year due to initial activities to address some questions of prior testing, and due to a period of maintenance for the on-line GC. Each test consisted of (a) flowing a synthetic blend of gases designed to be similar to an aqueous dissolver off-gas stream over the sorbent contained in three separate bed segments in series, (b) measuring each bed inlet and outlet gas concentrations of iodine and methyl iodide (the two surrogates of iodine gas species considered most representative of iodine species expected in dissolver off-gas), (c) operating for a long enough time to achieve breakthrough of the iodine species from at least one (preferably the first two) bed segments, and (d) post-test purging with pure N 2 to drive loosely or physisorbed iodine species off of the sorbent. Post-test calculations determine the control efficiencies for each bed, iodine loadings on the sorbent, and mass transfer zone depths. Portions of the iodine-laden sorbent from the first bed of two of the tests have been shipped to SNL for waste form studies. Over the past three years, we have explored a full range of inlet iodine and methyl iodide concentrations ranging from ~100 ppb to ~100 ppm levels, and shown adequate control efficiencies within a bed depth as shallow as 2 inches for lower concentrations and 4 inches for higher concentrations, for the AgZ-type sorbents. We are now performing a limited number of tests in the NC-77 sorbent from SNL. Then we plan to continue to (a) fill in data gaps needed for isotherms and dynamic sorbent modeling, and (b) test the performance of additional sorbents under development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Key features of the Talspeak and similar trivalent actinide-lanthanide partitioning processes

As closing of the nuclear-fuel cycle via the suite of UREX processes under development in the U.S. progresses, the Trivalent Actinide-Lanthanide Separation by Phosphorus Extractants and Aqueous Komplexants (TALSPEAK) process has been selected as the baseline process for partition of trivalent actinides away from fission-product lanthanides. In this report, selected features of the chemistry of the TALSPEAK process and the limited parallel information on other TALSPEAK-like processes are discussed. (author)

07 ISOTOPE AND RADIATION SOURCES↗

CoDCon Project: FY 2019 Status Report

The co-decontamination (CoDCon) project was established in FY 2016 with the objectives of (a) evaluating the uncertainty in the uranium (U)/plutonium (Pu) ratio in a mixed U/Pu product from a tributyl phosphate (TBP)–based solvent extraction flowsheet and (b) developing and demonstrating on-line optical spectroscopy for real-time monitoring of key components (e.g., Pu, U, and HNO 3 concentrations) in the process solutions. We are interested in establishing the accuracy and precision to which a specific uranium-to-plutonium (U/Pu) ratio can be achieved, which for the purposes of this project is set at a U/Pu mass ratio of 7/3. The uncertainty associated with achieving this specific target U/Pu ratio is being established through multiple flowsheet tests using laboratory-scale solvent extraction equipment. In addition, optical spectroscopic techniques have been incorporated into the CoDCon solvent extraction testing system, allowing real time monitoring of all input and output process streams. Two CoDCon flowsheet tests were successfully performed in FY 2018. In FY 2019, two additional flowsheet tests were performed. For the first of these (CoDCon Run 3), the dissolved fuel simulant was similar to that used in the first two tests, with the inclusion of 1 mM neptunium (Np). The second test conducted in FY 2019 (CoDCon Run 4) used a more representative dissolved fuel simulant, including addition of non-radioactive fission product elements. All tests used a bank of sixteen 2 cm centrifugal contactors. The tests involved first loading the solvent (30 vol% TBP dissolved in n-dodecane) with U and Pu, then the Pu was stripped from the loaded solvent with a U(IV) solution (~50 mM) and the flowsheet conditions were adjusted such that some U partitioned into the Pu-containing product stream. The amount of U accompanying the Pu was monitored in real time using optical spectroscopic techniques coupled with chemometric modeling. Based on the real-time spectroscopic measurement of the U/Pu ratio, adjustments were made to the flowrate of the fresh TBP solvent phase used to scrub U from the aqueous Pu-containing product. This proved to be a very effective way to control the U/Pu mass ratio in the product.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extraction, Characterization, and Stability Studies of Bistriazinyl-Derived Carboxylic Acids

Separation of An(III) and Ln(III) ions will benefit the recycling of used nuclear fuel (UNF). For this purpose, many ligands have been tested over the years, and several separation processes have been successfully demonstrated on the laboratory scale. Current research aims at the development of new ligands that are built only with carbon, hydrogen, oxygen, and nitrogen (CHON), as they can be incinerated completely without secondary waste production. Here, we tested a new class of water-soluble ligands, the bistriazinyl-octa-carboxylic acids. One member, in particular, 2,6-bis-[5,6-di(3,4-dicarboxyphenyl)-1,2,4- triazin-3-yl]-pyridine (BTPOA), was found to be suitable for the selective separation of Am(III) and Cm(III) ions from Ln(III) ions and may act as a CHON alternative to its sulfonated analogue (SO 3 -Ph-BTP). BTPOA exhibited good extraction results and a high selectivity for Am(III) over Eu(III) ions. This ligand’s complexation of metal ions was further studied using potentiometric spectroscopy, as well as time-resolved laser-induced spectroscopy with Cm(III) and Eu(III) in aqueous HClO 4 and HNO 3 media. Conditional stability constants of each formed species were determined. In the HClO 4 system, Cm(III) formed three species (1:1, 1:2, and 1:3) through the stepwise addition of a single BTPOA molecule. On the other hand, in HNO 3 , Cm(III) formed two 1:2 complexes and one 1:3 complex, while the stepwise formation of three species was observed for Eu(III). The stability constants are comparable to the values for SO 3 -Ph-BTP. The radiolytic behavior of BTPOA was also investigated using electron pulse irradiation measurements to determine absolute rate coefficients (k) under ambient temperature conditions for the reaction of BTPOA with typical UNF reprocessing radical radiolysis products the hydrated electron (e aq − , k = (1.60 ± 0.02) × 10 10 M −1 s −1 ), the hydrogen atom (H • , k = (2.17 ± 0.03) × 10 9 M −1 s −1 ), and hydroxyl ( • OH, k = (6.95 ± 0.06) × 10 9 M −1 s −1 ) and nitrate (NO 3 • , k = (0.37 ± 0.02) × 10 7 M −1 s−1) radicals. These rate coefficients indicate that the radiolytic longevity of BTPOA should increase with HNO 3 concentration, owing to the consumption of e aq − /H • , by nitrate anions, and the replacement of • OH by the less reactive NO 3 • .

Diaz Gomez, Laura [Forschungszentrum Juelich (Germ↗

Ruthenium Behavior at Phase Separation of Borosilicate Glass-12259

The Rokkasho reprocessing plant (RRP) located in Aomori, Japan, vitrifies high level waste (HLW) into a borosilicate glass. The HLW is generated from the reprocessing of spent fuel and contains ruthenium (Ru) and other platinum group metals (PGMs). Based on the recent consequences after a huge earthquake that occurred in Japan, a hypothetical blackout was postulated for the RRP to address additional safety analysis requirements. During a prolonged blackout, the borosilicate glass could phase separate due to cooling of the glass in the melter. The Ru present in the glass matrix could migrate into separate phases and impact the durability of the borosilicate glass. The durability of the glass is important for quality assurance and performance assessment of the vitrified HLW. A fundamental study was performed at an independent university to understand the impact of a prolonged blackout. Simulated HLW glasses were prepared for the RRP, and the Ru behavior in phase separated glasses was studied. The simulated HLW glasses contained nonradioactive elements and PGMs. The glass compositions were then altered to enhance the formation of the phase-separated glasses when subjected to thermal treatment at 700 deg. C for 24 hours. The synthesized simulated glasses contained 1.1 % Ru by weight as ruthenium dioxide (RuO{sub 2}). A portion of the RuO{sub 2} formed needle-shaped crystals in the glass specimens. After the thermal treatment, the glass specimen had separated into two phases. One of the two phases was a B{sub 2}O{sub 3} rich phase, and the other phase was a SiO{sub 2} rich phase. The majority of the chemical species in the B{sub 2}O{sub 3} rich phase was leached away with the Material Characterization Center-3 (MCC-3) protocol standardized by the Pacific Northwest National Laboratory using an aqueous low-concentrated nitric acid solution, but the leaching of the Ru fraction was very limited; less than 1% of the original Ru content. The Ru leaching was much less than those of the other elements, and the needle-shaped crystals of RuO{sub 2} were observed in the B{sub 2}O{sub 3} rich phase in the specimen after the leaching test. Another experiment was performed using another glass specimen which had been prepared with the same frits, but used reagent RuO{sub 2} of granular shape at lower content (0.0073% by weight as RuO{sub 2}). The leached fractions of elements for the latter specimen increased to almost the same fraction (more than 10% of the original Ru content) as observed for boron and sodium, when the phase separated glass was leached using the MMC-3 protocol with non-acidic de-ionized water. Based on the results of this study, it was concluded that needle-shaped RuO{sub 2} crystals are contained in the B{sub 2}O{sub 3}-rich phase after phase separation of the borosilicate glass after a hypothetical blackout. The leaching fraction for the needle-shaped RuO{sub 2} present in the phase separated glass is much lower than those for boron or sodium. Ruthenium behavior has been studied for a hypothetical loss of cooling in the liquid fed ceramic melter for high level waste by taking into account the phase separation of borosilicate glass. The needle-shaped crystal of ruthenium dioxide after bi-nodal-type phase separation of the borosilicate glass at 700 deg. C migrated into the B{sub 2}O{sub 3} rich phase, but remained without dissolution by an acidic aqueous solution. Additionally, granular ruthenium dioxide can be a morphological form of ruthenium after bimodal-type phase separation of the vitrified high level waste with borosilicate glass media. After the phase separation of the borosilicate glass, the crystal shape of the ruthenium dioxide is either needle-shaped or granular, and the leachable fraction of ruthenium is relatively much lower than those of major components (boron and sodium) in the vitrified borosilicate glass. The fraction of leached ruthenium increased to almost the same fraction as observed for boron and sodium when the phase-separated glass was leached with ultrapure water. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An interface tracking model for droplet electrocoalescence.

This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

Erickson, Lindsay Crowl↗

Testing of an Iodine and Tritium Capture System for an NO₂-Based Tritium Pretreatment Process

The reprocessing of used nuclear fuel would release volatile radionuclides into the off-gas streams of a processing plant, including ³H, ¹⁴C, ⁸⁵Kr, and ¹²⁹I. One potential simplification to the management of the off-gas streams could be achieved through an efficient tritium pretreatment (TPT) step in which the UO₂ fuel is oxidized by either air or NO₂ before dissolution. The oxidation of the UO₂ fuel matrix will result in the release of tritium from the fuel. Upfront release of tritium from the fuel in a pretreatment step with subsequent tritium abatement can minimize or eliminate the distribution of tritium throughout a plant. This can decrease or eliminate the need for tritium capture on multiple off-gas streams and prevent distribution to the aqueous inventory. The use of NO₂ as the oxidant in an advanced tritium pretreatment (ATPT) allows for the oxidation to be performed at lower temperatures and may also result in the quantitative release of iodine from the fuel. The ATPT off-gas will contain up to 75 vol% NO₂ gas. Spencer et al. identified the most promising iodine sorbent as silver nitrate-impregnated alumina (AgA) and the most promising tritium sorbents as 3Å molecular sieve (3Å MS) and silica gel for radionuclide capture from ATPT off-gas streams. An initial series of tests were conducted in fiscal years 2017–2018 with the intent of demonstrating the recovery of iodine and tritium using these sorbents from a recirculating gas stream that simulated the NO₂ recycle loop envisioned for the ATPT system. These initial tests showed low tritium recoveries and significant variations in the iodine recovery on the AgA. Ultimately it was concluded, following disassembly of the system, that corrosion within the system was partially the cause of the poor recovery of both species. All components of that system were disposed of at the end of the analysis. One of the conclusions drawn from the initial tests pointed to the reconsideration of the materials of construction. Based on that recommendation a new test bed for the advanced TPT off-gas system, that addresses the issues identified in the fiscal years 2017 and 2018 scoping tests, was designed and constructed. The test bed used high nickel alloys wherever possible to address the previously observed corrosion issues, a redesigned surge tank to permit ease of purging, an improved feed injection system and a more modular system design that allowed testing of incremental increases in system complexity to allow the isolation of any element that results in changes to recovery of target species. Accompanying that design, a multifaceted test plan was completed. The overarching goals of this test series were two-fold. The first goal was to demonstrate the ability to recover both the iodine and tritium that would be released during TPT in a manner that the releases from the fuel can be quantified. The second goal was to demonstrate that the combined recovery system could operate in any of the three proposed TPT modes (once-through air or O₂, recirculating air or O₂, or recirculating NO x ). A total of 22 tests were completed. Ten tests examined tritium behavior under varying operating parameters, 8 tests examined iodine behavior under varying operating parameters, and 4 tests examined both tritium and iodine behavior. Silica gel was used for the tritium sorbent, and AgA or Ag-mordenite (AgZ) was used as the iodine sorbent. The following conclusions were drawn: Full recovery is achieved for both sorbates when no sorbent is in place indicating no accumulation within the test system. In even the simplest of the configurations (i.e., no sorbents in the columns), iodine is more difficult to transport and recover from the system than tritium. Analysis of the AgA iodine sorbent beds from the integrated tritium and iodine tests indicate quantitative iodine recovery can be achieved (within anticipated experimental errors). This system may provide a means for the quantification of the iodine released by the ATPT process within the experimental uncertainties. This would support 0.33 to 1.00 kg demonstrations of the ATPT process with actual used nuclear fuel. Iodine penetrated further into AgZ than into AgA when operated in gas recirculation mode. Tritium adsorbs to and cannot be fully recovered from the 10-cm column of silica gel at regeneration temperatures up to 140 °C.; Tritium adsorbs to and cannot be recovered from the 10-cm column of AgA at desorption temperatures up to 200 °C. Co-adsorbed tritium was recovered to a greater extent from AgZ than from AgA, but recovery was not complete. No visible corrosion was observed in the test system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of the Actinide-Lanthanide Separation (ALSEP) Process

Separating the minor actinide elements (Am and Cm) from acidic high-level raffinates arising from the reprocessing of irradiated nuclear fuel is an important step in closing the nuclear fuel cycle. Most proposed approaches to this problem involve two solvent extraction steps: 1) co-extraction of the trivalent lanthanides and actinides, followed by 2) separation of the actinides from the lanthanides. The objective of our work is to develop a single solvent-extraction process for isolating the minor actinide elements. We report here a solvent containing N,N,N',N'-tetra(2 ethylhexyl)diglycolamide (T2EHDGA) combined with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) that can be used to separate the minor actinides in a single solvent-extraction process. T2EHDGA serves to co-extract the trivalent actinide and lanthanide ions from nitric acid solution. Switching the aqueous phase chemistry to a citrate buffered solution of N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid at pH 2.5 to 4 results in selective transfer of the actinides to the aqueous phase, thus affecting separation of the actinides from the lanthanides. Separation factors between the lanthanides and actinides are approximately 20 in the pH range of 3 to 4, and the distribution ratios are not highly dependent on the pH in this system.

actinide separation↗

Spectroscopic and Computational Characterization of Diethylenetriaminepentaacetic Acid/Transplutonium Chelates: Evidencing Heterogeneity in the Heavy Actinide(III) Series

Abstract The chemistry of trivalent transplutonium ions (Am 3+ , Cm 3+ , Bk 3+ , Cf 3+ , Es 3+ …) is usually perceived as monotonic and paralleling that of the trivalent lanthanide series. Herein, we present the first extended X‐ray absorption fine structure (EXAFS) study performed on a series of aqueous heavy actinide chelates, extending past Cm. The results obtained on diethylenetriaminepentaacetic acid (DTPA) complexes of trivalent Am, Cm, Bk, and Cf show a break to much shorter metal–oxygen nearest‐neighbor bond lengths in the case of Cf 3+ . Corroborating those results, density functional theory calculations, extended to Es 3+ , suggest that the shorter Cf−O and Es−O bonds could arise from the departure of the coordinated water molecule and contraction of the ligand around the metal relative to the other [M III DTPA(H 2 O)] 2− (M=Am, Cm, Bk) complexes. Taken together, these experimental and theoretical results demonstrate inhomogeneity within the trivalent transplutonium series that has been insinuated and debated in recent years, and that may also be leveraged for future nuclear waste reprocessing technologies.

Deblonde, Gauthier J. ‐P.↗

Optimization of sintered AgI-Mordenite composites for {sup 129}I storage

The thermal processing of a proposed durable waste form for {sup 129}I was investigated. The waste form is a composite with a matrix of low-temperature sintering glass that encapsulates particles of AgI-mordenite. Ag-mordenite, an ion-exchanged zeolite, is being considered as a capture medium for gaseous {sup 129}I{sub 2} as part of a spent nuclear fuel reprocessing scheme under development by the US Department of Energy/Nuclear Energy (NE). The thermal processing of the waste form is necessary to increase the density of the glass matrix by viscous sintering so that the final waste form does not have any open porosity. Other processes that can also occur during the thermal treatment include desorption of chemisorbed I{sub 2}, volatilization of AgI and crystallization of the glass matrix. We have optimized the thermal processing to achieve the desired high density with higher AgI-mordenite loading levels and with minimal loss of iodine. Using these conditions, 625 C. degrees for 20 minutes, the matrix crystallizes to form a eulytite phase. Results of durability tests indicate that the matrix crystallization does not significantly decrease the durability in aqueous environments. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spectroscopic and Computational Characterization of Diethylenetriaminepentaacetic Acid/Transplutonium Chelates: Evidencing Heterogeneity in the Heavy Actinide(III) Series

The chemistry of trivalent transplutonium ions (Am 3+ , Cm 3+ , Bk 3+ , Cf 3+ , Es 3+ …) is usually perceived as monotonic and paralleling that of the trivalent lanthanide series. We present the first extended X-ray absorption fine structure (EXAFS) study performed on a series of aqueous heavy actinide chelates, extending past Cm. The results obtained on diethylenetriaminepentaacetic acid (DTPA) complexes of trivalent Am, Cm, Bk, and Cf show a break to much shorter metal–oxygen nearest-neighbor bond lengths in the case of Cf 3+ . Corroborating those results, density functional theory calculations, extended to Es 3+ , suggest that the shorter Cf-O and Es-O bonds could arise from the departure of the coordinated water molecule and contraction of the ligand around the metal relative to the other [M III DTPA(H 2 O)] 2- (M=Am, Cm, Bk) complexes. Taken together, these experimental and theoretical results demonstrate inhomogeneity within the trivalent transplutonium series that has been insinuated and debated in recent years, and that may also be leveraged for future nuclear waste reprocessing technologies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Direct Extraction of Uranium Oxides with N,N -Di(2-ethylhexyl)isobutyramide

The direct extraction of uranium from voloxidized nuclear fuel into an organic solvent offers several potential advantages over conventional hydrometallurgical reprocessing, including reducing the reprocessing plant footprint, providing an initial degree of decontamination from fission products, and minimizing the amount of secondary waste from nitric acid. In this work, the direct extraction of uranium oxides into 1.5 M N,N-di(2-ethylhexyl)isobutyramide (DEHiBA) in n-dodecane is examined. UV–vis spectra and distribution ratios of HNO 2 in 1.5 M DEHiBA as well as the equilibrium organic phase H 2 O concentrations in HNO 3 -loaded 1.5 M DEHiBA are also reported. Hypothesized reaction stoichiometries for the direct extraction of uranium from UO 2 , α-U 3 O 8 , and ε-UO 3 are verified through analysis of organic-phase U, HNO 2 , and HNO 3 concentrations after dissolution. Water generated by the dissolution results in the formation of a separate aqueous phase, which will need to be accounted for in future flowsheet design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A SIGNIFICANT AMOUNT OF CRYSTALLINE SILICA IN RETURNED COMETARY SAMPLES: BRIDGING THE GAP BETWEEN ASTROPHYSICAL AND METEORITICAL OBSERVATIONS

Crystalline silica (SiO{sub 2}) is recurrently identified at the percent level in the infrared spectra of protoplanetary disks. By contrast, reports of crystalline silica in primitive meteorites are very unusual. This dichotomy illustrates the typical gap existing between astrophysical observations and meteoritical records of the first solids formed around young stars. The cometary samples returned by the Stardust mission in 2006 offer an opportunity to have a closer look at a silicate dust that experienced a very limited reprocessing since the accretion of the dust. Here, we provide the first extended study of silica materials in a large range of Stardust samples. We show that cristobalite is the dominant form. It was detected in 5 out of 25 samples. Crystalline silica is thus a common minor phase in Stardust samples. Furthermore, olivine is generally associated with this cristobalite, which put constraints on possible formation mechanisms. A low-temperature subsolidus solid–solid transformation of an amorphous precursor is most likely. This crystallization route favors the formation of olivine (at the expense of pyroxenes), and crystalline silica is the natural byproduct of this transformation. Conversely, direct condensation and partial melting are not expected to produce the observed mineral assemblages. Silica is preserved in cometary materials because they were less affected by thermal and aqueous alterations than their chondritic counterparts. The common occurrence of crystalline silica therefore makes the cometary material an important bridge between the IR-based mineralogy of distant protoplanetary disks and the mineralogy of the early solar system.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulant Testing of a Co-Decontamination (CoDCon) Flowsheet for a Product with a Controlled Uranium-to-Plutonium Ratio

Multiple tests of a co-decontamination (CoDCon) tributyl phosphate (TBP) based solvent extraction flowsheet are being performed to determine the uncertainties associated with maintaining a target U/Pu ratio in the Pu-containing product. The first two flowsheet tests used simple dissolved fuel simulants containing only U and Pu, but increasingly more complex simulants will but used in subsequent tests, with the ultimate goal of performing tests with irradiated fuel. The flowsheet is designed so as not to create a purified Pu stream, but rather a mixture of U and Pu with a U/Pu mass ratio of 7/3. Uranium and Pu are first co-extracted into the TBP solvent, and then U(IV) is used to strip the Pu from the loaded solvent. A fresh TBP solvent stream is introduced at the same stage the Pu-containing aqueous stream exits. The flowrate of the fresh TBP solvent stream is adjusted so that sufficient U bleeds over into the Pu product to produce the desired U/Pu ratio. The system is monitored in real time using optical spectroscopy, which allows for control of the U/Pu ratio through adjustment of the fresh TBP solvent flowrate. This paper will describe the results of the first two CoDCon flowsheet tests.

CoDCon, fuel recycle, fuel reprocessing, on-line m↗