Search NASA⌕ Search

SEARCH · Search NASA

Results for “astronomical data bases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Efficient transfer of images over networks

Effective remote observing requires sending large images over long distances. The usual approach to the transfer problem is to require high bandwidth transmission links, which are expensive to install and operate. An alternative approach is to use existing low-bandwidth connections, such as phone lines or the Internet, in a highly efficient manner by compressing the images. The combined use of existing low-cost infrastructure and standard networking software means that remote observing can be made practical even for small observatories with limited network resources. The authors have implemented such a scheme based on the H-transform compression method developed for astronomical images, which are often resistant to compression because they are noisy. The H-transform can be used for either lossy or lossless compression, and compression factors of at least 10 can be achieved with no noticeable losses in the astrometric or photometric properties of the compressed images. The H-transform allows us to organize the information in an image so that the 'useful' information can be sent first, followed by the noise, which makes up the bulk of the transmission. The receiver can invert a partially received set of H-coefficients, creating an image that improves with time. The H-transform is particularly well-suited to this style of incremental reconstruction, because the spatially localized nature of the basis functions of the H-transorm prevents the appearance of artifacts such as ringing around point sources and edges. The authors' implementation uses the WIYN Telescope Control System's TCP-based communications protocol. An 800x800 16-bit astronomical image was sent over a 2400 baud connection, which would normally take about 71 minutes; after only 60 seconds, the partially received H-transform produced an image that did not differ appreciably from the original. This poster presents a quantification of the efficiencies, as well as examples of images reconstructed from partial data.

Percival, J. W.↗

PERCIVAL mission to Mars

With the downturn of the world economy, the priority of unmanned exploration of the solar system has been lowered. Instead of foregoing all missions to our neighbors in the solar system, a new philosophy of exploration mission design has evolved to insure the continued exploration of the solar system. The 'Discovery-class' design philosophy uses a low cost, limited mission, available technology spacecraft instead of the previous 'Voyager-class' design philosophy that uses a 'do-everything at any cost' spacecraft. The Percival Mission to Mars was proposed by Ares Industries as one of the new 'Discovery-class' of exploration missions. The spacecraft will be christened Percival in honor of American astronomer Percival Lowell who proposed the existence of life on Mars in the early twentieth century. The main purpose of the Percival mission to Mars is to collect and relay scientific data to Earth suitable for designing future manned and unmanned missions to Mars. The measurements and observations made by Percival will help future mission designers to choose among landing sites based on the feasibility and scientific interest of the sites. The primary measurements conducted by the Percival mission include gravity field determination, surface and atmospheric composition, sub-surface soil composition, sub-surface seismic activity, surface weather patterns, and surface imaging. These measurements will be taken from the orbiting Percival spacecraft and from surface penetrators deployed from Mars orbit. The design work for the Percival Mission to Mars was divided among four technical areas: Orbits and Propulsion System, Surface Penetrators, Gravity and Science Instruments, and Spacecraft Structure and Systems. The results for each of the technical areas is summarized and followed by a design cost analysis and recommendations for future analyses.

Reed, David W.↗

ASpec: A New Spectrum and Line Analysis Package for IRAF

ASpec is a new spectrum and line analysis package developed at STScI. ASpec is designed as an add-on package for IRAF and incorporates a variety of analysis techniques for astronomical spectra. ASpec operates on spectra from a wide variety of ground-based and space-based instruments. ASpec allows simultaneous handling of spectra from different wavelength regimes. ASpec accommodates non-linear dispersion relations. ASpec provides a variety of functions, individually or in combination, with which to fit spectral features and the continuum. ASpec permits the masking of known bad data. ASpec provides a powerful, intuitive graphical user interface implemented using the new IRAF Object Manager and customized to handle: data input/output (I/O); on-line 'help'; selection of relevant features for analysis; plotting and graphical interaction; and data base management.

Hulbert, Stephen J.↗

Proof-of-Concept Studies for a Local Tie Monitoring System

We present preliminary results of proof-of-concept studies for an automatic monitoring system of local site ties. The system is based on the usage of robotic total stations. A set of tests were performed with a Leica TCA2003 total station on the local network of Goddard s Geophysical and Astronomical Observatory (GGAO) and the 5-m VLBI antenna at this site. Both the TCA2003 and the VLBI antenna are controlled from a Matlab-coded control program. Running specific observational programs, data were collected that indicate that the reference point of the VLBI antenna can be automatically determined with an accuracy of 1 mm or better.

Schmeing, Benno↗

Development of a moon-based magnetospheric and coronal imager using a large broadband array

The 'Missions to and from Planet Earth' mandated by President Bush in 1989 provide a unique opportunity for magnetospheric and coronal plasma physicists to cooperate with low frequency radio astronomers in the development of an advanced experiment designed for the lunar surface. A large active lunar based array would sound the Earth's magnetosphere at VLF frequencies and the solar corona at decametric wavelengths allowing plasma physicists to map both the Earth's magnetosphere and those regions in the solar corona that trigger precursors to solar flares. With the transmitter silent, the array would become the ideal low frequency radio telescope, examining both geospace emissions such as auroral kilometric radiation and extraterrestrial signals from the planets, pulsars, supernova remnants, and active galactic nuclei. Both experiments satisfy requirements mandated in both 'Mission to Planet Earth' and in 'Mission from Planet Earth.' By proposing a cooperative effort both communities (plasma physicists and radio astronomers) stand to benefit. Jim Green, Director of the NASA Space Science Data Center (NSSDC) at GSFC; Tony Phillips, Research Fellow at California Institute of Technology; T. D. Carr, Director of the University of Florida Radio Observatory (UFRO) and the author are enlisting the cooperation of the scientific community in defining the system specifications. Some components, such as the receivers, will be standard 'off-the-shelf' items, and hence will require little developmental research. However, the individual antenna elements and the phasing and matching networks will require some R&D to satisfy the frequency requirements (20 KHz-40 MHz). By flying the experiment in Earth orbit first, Dr. Green proposes to gather valuable magnetospheric data as well as to prove the principle of the large moon based experiment. He claims that funding for the preliminary ground based studies at the UFRO may be available as early as FY-92.

Lebo, George↗

Scientific investigations with the data base HEAO-1 scanning modulator collimator

The hardware specification for the Scanning Modulation Collimator (MC) experiment on HEAO-1 was to measure positions of bright (greater than 10(exp -11) ergs/cm(exp 2)s), hard (1 to 15 keV) x-ray sources to 5-10 arcsec, and to measure their size and structure in three energy bands down to 10 arcsec resolution. The scientific purpose of this specification was to enable the identification of these x-ray sources with optical and radio objects in order to elucidate the x-ray emission mechanism and the nature of the candidate astronomical system. The experiment was an outstanding success. Hardware systems functioned perfectly although loss of one (out of eight) proportional counters degraded our sensitivity by about 10 percent. Our aspect solution of 7 arcsec precision, allowed us to achieve statistic-limited location precision for all but the strongest sources. We vigorously pursued a strategy of determining the scientific importance of each identification, and of publishing each scientific result as it came along.

Schwartz, Daniel A.↗

IRAS observations of comets

The moderate spatial resolution and high sensitivity of the Infrared Astronomical Satellite (IRAS), which surveyed the celestial sphere during 1983 at wavelengths of 12, 25, 60, and 100 microns, were particularly well suited to detecting extended thermal emission from cometary dust. Sources with infrared color temperatures characteristic of solar system bodies, and at the ephemerides position of known comets were selected for analysis by the IRAS Asteroid Data Analysis System (ADAS). The data base is now available for use by researchers. This paper describes the development of the data base, details its entries, and presents a statistical analysis of its contents. The IRAS survey contains multiple observations of many periodic comets. A brief description and analysis is given of the observed infrared and derived physical properties for several comets of special interest.

Walker, R. G.↗

Providing hydrogen maser timing stability to orbiting VLBI radio telescope observations by post-measurement compensation of linked frequency standard imperfections

Orbiting VLBI (OVLBI) astronomical observations are based upon measurements acquired simultaneously from ground-based and earth-orbiting radio telescopes. By the mid-1990s, two orbiting VLBI observatories, Russia's Radioastron and Japan's VSOP, will augment the worldwide VLBI network, providing baselines to earth radio telescopes as large as 80,000 km. The challenge for OVLBI is to effectuate space to ground radio telescope data cross-correlation (the observation) to a level of integrity currently achieved between ground radio telescopes. VLBI radio telescopes require ultrastable frequency and timing references in order that long term observations may be made without serious cross-correlation loss due to frequency source drift and phase noise. For this reason, such instruments make use of hydrogen maser frequency standards. Unfortunately, space-qualified hydrogen maser oscillators are currently not available for use on OVLBI satellites. Thus, the necessary long-term stability needed by the orbiting radio telescope may only be obtained by microwave uplinking a ground-based hydrogen maser derived frequency to the satellite. Although the idea of uplinking the frequency standard intrinsically seems simple, there are many 'contaminations' which degrade both the long and short term stability of the transmitted reference. Factors which corrupt frequency and timing accuracy include additive radio and electronic circuit thermal noise, slow or systematic phase migration due to changes of electronic circuit temporal operating conditions (especially temperature), ionosphere and troposphere induced scintillations, residual Doppler-incited components, and microwave signal multipath propagation. What is important, though, is to realize that ultimate stability does not have to be achieved in real-time. Instead, information needed to produce a high degree of coherence in the subsequent cross-correlation operation may be derived from a two-way coherent radio link, recorded and later introduced as compensations adjunct to the VLBI correlation process. Accordingly, this paper examines the technique for stable frequency/time transfer within the OVLBI system, together with a critique of the types of link degradation components which must be compensated, and the figures of merit known as coherence factors.

Springett, James C.↗

Two-sample discrimination of Poisson means

This paper presents a statistical test for detecting significant differences between two random count accumulations. The null hypothesis is that the two samples share a common random arrival process with a mean count proportional to each sample's exposure. The model represents the partition of N total events into two counts, A and B, as a sequence of N independent Bernoulli trials whose partition fraction, f, is determined by the ratio of the exposures of A and B. The detection of a significant difference is claimed when the background (null) hypothesis is rejected, which occurs when the observed sample falls in a critical region of (A, B) space. The critical region depends on f and the desired significance level, alpha. The model correctly takes into account the fluctuations in both the signals and the background data, including the important case of small numbers of counts in the signal, the background, or both. The significance can be exactly determined from the cumulative binomial distribution, which in turn can be inverted to determine the critical A(B) or B(A) contour. This paper gives efficient implementations of these tests, based on lookup tables. Applications include the detection of clustering of astronomical objects, the detection of faint emission or absorption lines in photon-limited spectroscopy, the detection of faint emitters or absorbers in photon-limited imaging, and dosimetry.

Lampton, M.↗

FGK stars and T Tauri stars: Monograph series on nonthermal phenomena in stellar atmospheres

The purpose of this book, FGK Stars and T Tauri Stars, like all other volumes of this series, is to exhibit and describe the best space data and ground based data currently available, and also to describe and critically evaluate the status of current theoretical models and physical mechanisms that have been proposed to interpret these data. The method for obtaining this book was to collect manuscripts from competent volunteer authors, and then to collate and edit these contributions to form a well structured book, which will be distributed to an international community of research astronomers by NASA and by the French CNRS.

Cram, Lawrence E.↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000/micron or 4000 to 1/cm).

Dust↗

Infrared monitoring of the Space Station environment

The measurement and monitoring of infrared emission in the environment of the Space Station has a twofold importance - for the study of the phenomena itself and as an aid in planning and interpreting Station based infrared experiments. Spectral measurements of the infrared component of the spacecraft glow will, along with measurements in other spectral regions, provide data necessary to fully understand and model the physical and chemical processes producing these emissions. The monitoring of the intensity of these emissions will provide background limits for Space Station based infrared experiments and permit the determination of optimum instrument placement and pointing direction. Continuous monitoring of temporal changes in the background radiation (glow) will also permit better interpretation of Station-based infrared earth sensing and astronomical observations. The primary processes producing infrared emissions in the Space Station environment are: (1) Gas phase excitations of Station generated molecules ( e.g., CO2, H2O, organics...) by collisions with the ambient flux of mainly O and N2. Molecular excitations and generation of new species by collisions of ambient molecules with Station surfaces. They provide a list of resulting species, transition energies, excitation cross sections and relevant time constants. The modeled spectrum of the excited species occurs primarily at wavelengths shorter than 8 micrometer. Emissions at longer wavelengths may become important during rocket firing or in the presence of dust.

Kostiuk, Theodor↗

Categorization of planets and exoplanets for Astrobiology.

Introduction: The number of exoplanets detected is astounding –and was not predicted. Note that Bo-rucki’s foundational paper for the Kepler mission in 1984 predicted:“...a detection rate of one planet per year of observation appears possible.”[1]. Even more astounding is the enormous diversity of exoplanets [2,3]. It is already clear from the data, that our Solar System does not bound the diversity and the range of processes seen in the exoplanets [2,3,4]. As telescopes improve it is certain that the number of exoplanets will become astronomical and the diversity will increase apace. The search for habitable locations and for evidence of life is a central part of the approach and excitement of exoplanet research [5,6]. Based on our experience to date we can expect that there will be enormous diversity in the types of habitability and life on exoplanets and that the Earth and our Solar System do not bound the possibilities for either habitability and life, and may not even provide a definite guide to selecting c and i-dates for detailed study from the enormous lists of exoplanets that will emerge. How can we develop a system for categorizing exoplanets in a way that allows for selection and prioritization in the search for diverse habitats and for diverse lifeforms?The short answer is we have no idea. In this short abstract I will venture some suggested approach-es. (see also[7]). To date, our solar system provides three classes for a habitable world:1) Earth. Water worlds, represented, of course, by Earth, and Earth-like worlds Venus and Mars. 2) Europa. Ice-covered worlds represented by Europa and including Enceladus and others, and 3) Titan. Cryogenic liquid covered worlds, represented by Titan. Earth and Europa world simply life made from carbon compounds in a water medium. Interest in these“ water worlds” is rooted in our understanding of life on Earth–the only example of life we have. The primary difference between Earth and Europa worlds is access to sunlight as an energy source on Earth. Titan represents the concept of carbon-based life in a cryogenic liquid such as CH4or C2H6 [8-13]. It is unlikely that Earth, Europa, and Titan represent the full range of possible classes of habitability for the many exoplanets that have been, or will be, discovered. It is also unlikely that life as we know it on Earth represents the full range of possible life on exoplanets. I am suggesting here that we start with these three classes (Earth, Europa, Titan) for exoplanet characterization and add others based on predicted types, such as “Hycean” worlds, a hypothetical type of planet with a hot, water-covered surface with a hydrogen dominated atmosphere [14] and the many examples considered in [15,16] and even imagined habitability and life forms [7] such as Sarr -a small, hot (500°C) rocky planet with an atmosphere over liquid sulfur. And that hosts only sulfur-based life. We are probably safe in the assumption that the richness and diversity of the exoplanets will exceed that of our collective imaginations.

Christopher P Mckay↗

The scanning modulation collimator experiment on the HEAO-1

The purpose of this experiment is to localize celestial sources of X-rays to a precision of 5 to 20 arcsec, so that they may be identified with optical or radio counterparts. We also study their angular size and structure, to elucidate the X-ray emission mechanism. Four grids, wound with nickel alloy wires, are aligned to produce a modulated X-ray signal when the spacecraft rotation carries the collimator field of view across an X-ray source. An image dissector star camera and rate integrating gyroscopes are used to deduce the celestial position from which a peak X-ray signal arises. On-orbit performance and thermal stability have been very good. Based on the first six weeks of quick look data, we have the following results: the location of an X-ray burst source within a globular cluster; the location of 4U1608-52, a unique object which shows bursting, transient, and steady X-ray behavior and is also an optical source; the location of the X-ray transient H1705-25, which provided Anglo-Australian astronomers the basis for an optical identification with a nova-like object; the location of the X-ray transient H1743-32 in the galactic center; and a precise measurement of the angular extent of the Crab Nebula.

Schwartz, D. A.↗

Documentation for the machine-readable version of the Absolute Calibration of Stellar Spectrophotometry

The machine-readable data file of The Absolute Calibration of Stellar Spectrophotometry as distributed by the Astronomical Data Center is described. The data file contains the absolute fluxes for 16 stars published in Tables 1 and 2 of Johnson (1980). The absolute calibrations were accomplished by combining the 13-color photometry calibrations of Johnson and Mitchell (1975) with spectra obtained with a Michelson spectrophotometer and covering the wavelength range 4000 to 10300 A (Johnson 1977). The agreement between this absolute calibration and another recent one based upon data for a Lyr and 109 Vir by Tug, White and Lockwood (1977) is shown by Johnson (1980) to be quite good.

Warren, W. H., Jr.↗

Policy opportunities

Recommendations are given regarding National Science Foundation (NSF) astronomy programs and the NASA Space Astrophysics program. The role of ground based astronomy is reviewed. The role of National Optical Astronomy Observatories (NOAO) in ground-based night-time astronomical research is discussed. An enhanced Explored Program, costs and management of small and moderate space programs, the role of astrophysics within NASA's space exploration initiative, suborbital and airborne astronomical research, the problems of the Hubble Space Telescope, and astronomy education are discussed. Also covered are policy issues related to the role of science advisory committees, international cooperation and competition, archiving and distribution of astronomical data, and multi-wavelength observations of variable sources.

Mccray, Richard↗

The International Halley Watch

An International Halley Watch has been established to coordinate worldwide ground-based observations of Halley's Comet in the upcoming apparition. Channels have been created for cooperation with the space missions being sent to Halley in order to maximize the value of the collective scientific results. Details are given of the IHW organization already established, which includes 722 astronomers from 42 countries. The ultimate goal of the IHW is the 1989 production of a 'Halley Archive' of all Halley scientific data.

Newburn, R. L., Jr.↗

Experiments and scaling laws for catastrophic collisions

The existing data on shattering impacts are reviewed using natural silicate, ice, and cement-mortar targets. A comprehensive data base containing the most important parameters describing these experiments was prepared. The collisional energy needed to shatter consolidated homogeneous targets and the ensuing fragment size distributions have been well studied experimentally. However, major gaps exist in the data on fragment velocity and rotational distributions, as well as collisional energy partitioning for these targets. Current scaling laws lead to predicted outcomes of asteroid collisions that are inconsistent with interpretations of astronomical data.

Fujiwara, A.↗