Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic mix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Designing order–disorder transformation in high-entropy ferritic steels

Order–disorder transformations hold an essential place in chemically complex high-entropy ferritic steels (HEFSs) due to their critical technological application. The chemical inhomogeneity arising from mixing of multi-principal elements of varying chemistry can drive property altering changes at the atomic scale, in particular short-range order. Using density-functional theory-based linear-response theory, we predict the effect of compositional tuning on the order–disorder transformation in ferritic steels—focusing on Cr–Ni–Al–Ti–Fe HEFSs. We show that Ti content in Cr–Ni–Al–Ti–Fe solid solutions can be tuned to modify short-range order that changes the order–disorder path from BCC-B2 (Ti atomic-fraction = 0) to BCC-B2-L2 1 (Ti atomic-fraction > 0) consistent with existing experiments. Our study suggests that tuning degree of SRO through compositional variation can be used as an effective means to optimize phase selection in technologically useful alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Four-wave mixing with anti-parity-time symmetry in hot 85 Rb vapor

Here, we report an experimental demonstration of anti-parity-time symmetric optical four-wave mixing in thermal rubidium vapor, where the propagation of probe and stokes fields in a double-Λ scheme is governed by a non-Hermitian Hamiltonian. We are particularly interested in studying quantum intensity correlations between the two fields near the exceptional point, taking into account loss and accompanied Langevin noise. Our experimental measurements of classical four-wave mixing gain and the associated two-mode relative-intensity squeezing are in reasonable agreement with the theoretical predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Insights into the Li Diffusion Mechanism in Si/C Composite Anodes for Lithium-Ion Batteries

Recently, Si/C composite materials have attracted enormous research interest as the most promising candidates for the anodes of next-generation lithium-ion batteries, owing to their high energy density and mechanical buffering property. However, the fundamental mechanism of Li diffusion behavior in various Si/C composite materials remains unclear, with our understanding limited by experimental techniques and continuum modeling methodologies. Herein, the atomic behavior of Li diffusion in the Si/C composite material is studied within the framework of density functional theory. Two representative structural mixing formats, that is, simple mixture mode and core-shell mode, are modeled and compared. We discover that the carbon material increases Li diffusion in silicon from 7.75 x 10 -5 to 2.097 x 10 -4 cm 2 /s. The boost is about 50% more obvious in the mixture mode, while the core-shell structure shows more dependence on the atomic structures of the carbon layer. These results offer new insights into Li diffusion behavior in Si/C composites and unlock the enhancing mechanism for Li diffusion in Si/C. Furthermore, this understanding facilitates the modeling of batteries with composite anodes and will guide the corresponding structure designs for robust and high-energy-density batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Substrate-Directed Underlayer Growth of Bilayer MoS 2 Revealed by Mo Isotope Labeling

Direct control over the vertical formation sequence and stacking registry in van der Waals (vdW) bilayers is essential for device performance and moiré engineering yet difficult to resolve unambiguously with conventional probes. Here, we use Mo isotope labeling in a two-step chemical vapor deposition process to synthesize bilayer MoS 2 and trace its vertical formation on common substrates. By combining site-selective laser thinning, Raman spectroscopy, time-of-flight secondary ion mass spectrometry, and atomic-resolution scanning transimission electron microscopy (STEM), we find a clear substrate dependence: on SiO 2 /Si, the second layer nucleates and grows beneath the first (underlayer), whereas on sapphire, it forms on top (overlayer). Density functional theory indicates that a larger equilibrium interfacial separation and weaker MoS 2 –substrate interactions on amorphous SiO 2 permit confined interfacial diffusion and underlayer nucleation, whereas stronger interactions and smaller separations on sapphire favor overlayer growth. On SiO 2 , confined epitaxy templates commensurate 2H, 3R, and mixed bilayers, as confirmed by second harmonic generation spectroscopy and STEM. During underlayer coalescence, embedded mirror-twin grain boundaries stitch atomically sharp 2H|3R junctions via alternating 4|8 ring motifs. Molecular-dynamics simulations reveal that these alternating 4|8 motifs accommodate interlayer vdW coupling and locally modulate the stacking registry. These results provide mechanistic insight into confined epitaxial growth and establish isotope labeling as a powerful probe of two-dimensional materials synthesis.

MoS2↗
DOE OSTI2023

Hard x-ray – optical four-wave mixing using a split-and-delay line

New, hard x-ray free electron lasers (FEL) produce intense femtosecond-to-attosecond pulses at angstrom wavelengths, giving access to the fundamental spatial and temporal scales of matter. These revolutionary light sources open the door to applying the suite of nonlinear, optical spectroscopy methods at hard x-ray photon energies. Nonlinear spectroscopy with hard x-rays can allow for measuring the coherence properties of short wavelength excitations with atomic specificity and for understanding how high energy excitations couple to other degrees of freedom in atomic, molecular or condensed-phase systems. As a step in this direction, here we present hard x-ray, optical four-wave mixing (4WM) measurements done at 9.8 keV at the split-and-delay line at the x-ray correlation spectroscopy (XCS) hutch of the Linac Coherent Light Source (LCLS). In this work, we create an x-ray transient grating (TG) from a pair of crossing x-ray beams and diffract optical laser pulses at 400 nm from the TG. The key technical advance here is being able to independently vary the delays of the x-ray pulses. Measurements were made in 3 different solid samples: bismuth germinate (BGO), zinc oxide (ZnO) and yttrium aluminum garnet (YAG). The resulting phase-matched, 4WM signal is measured in two different ways: by varying the x-ray, x-ray pulse delay which can reveal both material and light source coherence properties and also by varying the optical laser delay with respect to the x-ray TG to study how the x-ray excitation couples to the optical properties. Although no coherent 4WM signal was seen in these measurements, the absence of this signal gives important information on experimental requirements for detecting this in future work. Also, our laser-delay scans, although not a new measurement, were applied to different materials than in past work and reveal new examples x-ray induced lattice dynamics in solids. This work represents a key step towards extending nonlinear optics and time-resolved spectroscopy into the hard x-ray regime.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Singlet magnetism in intermetallic UGa 2 unveiled by inelastic x-ray scattering

Using high resolution tender x-ray resonant inelastic scattering and hard x-ray nonresonant inelastic scattering beyond the dipole limit we were able to detect electronic excitations in intermetallic UGa 2 that are highly atomic in nature. Analysis of the spectral lineshape reveals that the local 5⁢ƒ 2 configuration characterizes the correlated nature of this ferromagnet. The orientation and directional dependence of the spectra indicate that the ground state is made of the Γ 1 singlet and/or Γ 6 doublet symmetry. With the ordered moment in the ab plane, we infer that the magnetism originates from the higher lying Γ 6 doublet being mixed with the Γ 1 singlet due to intersite exchange, qualifying UGa 2 to be a true quantum magnet. The ability to observe atomic excitations is crucial to resolve the ongoing debate about the degree of localization versus itineracy in U intermetallics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Efficiency of using nitrogen trifluoride as an oxidiser in a supersonic continuous-wave chemical HF laser

We report the results of an experimental study of possible ways to increase the efficiency of using NF{sub 3} nitrogen trifluoride as an oxidiser in an atomic fluorine generator of a supersonic continuous-wave chemical HF laser with a flat nozzle block corresponding to the nozzle – nozzle reagent mixing scheme. As such ways, we consider increasing the residence time of reagents in the combustion chamber and rising temperature in the chemical reaction zone. Comparison of specific energy characteristics of an HF laser operating with the use of the studied (NF{sub 3}) and ‘basic’ (F{sub 2}) oxidisers shows that the replacement of molecular fluorine with nitrogen trifluoride during the burning with deuterium in the combustion chamber of an atomic fluorine generator with allowance for the proposed measures leads to a reduction in the specific laser energy output by no more than 23 % – 24 % at high burning completeness. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A new interatomic potential for mixed Mg-Al-Ga-In spinels

While density functional theory (DFT) has become the de facto approach for accurate simulation of materials at the atomic scale, there are many aspects of materials that are simply out of reach of DFT methods. In particular, finite temperature properties such as diffusivities, the structure and properties of grain boundaries and interfaces, and the study of defect properties in complex alloys are computationally challenging for DFT methods. Recently, a new class of spinels in which three cations order over two sublattices was discovered. In order to predict the properties of these types of structures, classical potentials are a must. Here, in this work, we derive a new classical potential for Mg-bearing spinels in which the B cations are Al, Ga, and/or In. The potential does well in describing the DFT energetics of various spinel structures as a function of chemistry and inversion. In particular, it reproduces the thermodynamically favorable MgAlGaO 4 structure while correctly predicting that neither MgAlInO 4 nor MgGaInO 4 are stable. Further, it reproduces physical trends in elastic properties as compared against experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

X-ray-line coincidence photopumping in a potassium-chlorine mixed plasma

Exploiting the multiple long pulse capability and suite of x-ray diagnostics of the Orion laser, we have set out to explore line coincidence photopuming—the enhancement in population of an atomic level brought on by resonant absorption of x rays from a different emitting ion. Unlike previous work, the two ions are in the same plasma and so the experiment is an x-ray analog of the well-known Bowen resonance fluorescence mechanism that operates in astrophysical situations in the optical region. Herein, our measurements have shown enhanced fluorescence in a chlorine plasma, attributable to line coincident photopumping from co-mixed potassium ions. To detect this relatively low signal-to-noise phenomenon, the data from multiple shots are combined, and the statistical method of bootstrapping is used to assign a confidence value to the measured enhancement, resulting in an estimate of the enhancement of 39 ± 18 16 % compared to the null case, where no pumping occurs. The experimental results have been compared to coupled radiation-transport and radiation hydrodynamics simulations using the CRETIN code together with the NYM radiation hydrodynamics model and agreement has been found, with the simulations also predicting modest enhancement.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Effective medium approximation for the refractive index of stratified metal oxide composites synthesized by atomic layer deposition

Atomic layer deposition (ALD) is a unique method for synthesizing conformal layers with precise composition. It is especially useful for the synthesis of mixed metal oxides for functional materials. One application of interest is the use of ALD for tailoring the refractive index of coatings. In homogeneously distributed composites of metal oxides, the refractive properties can be approximated as the average of the indices of the components. This is known as an effective medium approximation (EMA) and can be used to design the macroscopic properties of composites. ALD produces layered, anisotropic films, so the validity of an EMA in describing these films is not clear. Here, we use optical simulations and experimental characterization of stratified composites of TiO 2 and Al 2 O 3 to study the application of an EMA to the transmission and reflection behavior of ALD-prepared mixed metal oxide thin films. We found that when the characteristic layer thickness is smaller than roughly 10 nm, the optical spectra of theoretical and experimental ALD films match the equivalent theoretical spectra for a material with a refractive index calculated from a simple, compositionally weighted EMA. Hence, this EMA could describe the transmission and reflectance spectra in ALD-derived TiO2–Al 2 O 3 nanolaminates when the films were sufficiently stratified even without thorough characterization of the real layers in the films. As a result, we demonstrated that ALD can be used to prepare effectively homogenous mixed metal oxide films with a predictable, tailorable refractive index of any value between those of the TiO 2 and Al 2 O 3 component materials.

42 ENGINEERING↗
DOE OSTI2024

The Role of Side Chains and Hydration on Mixed Charge Transport in n ‐Type Polymer Films

Abstract Introducing ethylene glycol (EG) side chains to a conjugated polymer backbone is a well‐established synthetic strategy for designing organic mixed ion‐electron conductors (OMIECs). However, the impact that film swelling has on mixed conduction properties has yet to be scoped, particularly for electron‐transporting (n‐type) OMIECs. Here, the authors investigate the effect of the length of branched EG chains on mixed charge transport ofn‐type OMIECs based on a naphthalene‐1,4,5,8‐tetracarboxylic‐diimide‐bithiophene backbone. Atomic force microscopy (AFM), grazing‐incidence wide‐angle X‐ray scattering (GIWAXS), and scanning tunneling microscopy (STM) are used to establish the similarities between the common‐backbone films in dry conditions. Electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D) and in situ GIWAXS measurements reveal stark changes in film swelling properties and microstructure during electrochemical doping, depending on the side chain length. It is found that even in the loss of the crystallite content upon contact with the aqueous electrolyte, the films can effectively transport charges and that it is rather the high water content that harms the electronic interconnectivity within the OMIEC films. These results highlight the importance of controlling water uptake in the films to impede charge transport inn‐type electrochemical devices.

Chemistry↗
DOE OSTI2025

Resolving discrepancies in bang-time predictions for indirect-drive ICF experiments on the NIF: Insights from the Build-A-Hohlraum campaign

This study investigated discrepancies between measured and simulated x-ray drive in Indirect-Drive Inertial Confinement Fusion (ID-ICF) hohlraums at the National Ignition Facility. Despite advances in radiation-hydrodynamic simulations, a consistent “drive deficit” remains. Experimentally measured ID-ICF capsule bang-times are systematically 400–700 ps later than simulations predict. The Build-A-Hohlraum (BAH) campaign explored potential causes for this discrepancy by systematically varying hohlraum features, including laser entrance hole (LEH) windows, capsules, and gas fills. Overall, the agreement between simulated and experimental x-ray drive was found to be largely unaffected by these changes. The data allow us to exclude some hypotheses put forward to potentially explain the discrepancy. Errors in the local thermodynamic equilibrium (LTE) atomic modeling, errors in the modeling of LEH closure, and errors due to a lack of plasma species mix physics in simulations are shown to be inconsistent with our measurements. Instead, the data support the hypothesis that errors in NLTE emission modeling are a significant contributor to the discrepancy. X-ray emission in the 2–4 keV range is found to be approximately 30% lower than in simulations. This is accompanied by higher than predicted electron temperatures in the gold bubble region, pointing to errors in non-LTE modeling. Introducing an opacity multiplier of 0.87 on energy groups above 1.8 keV improves agreement with experimental data, reducing the bang-time discrepancy from 300 to 100 ps. These results underscore the need for refined NLTE opacity models to enhance the predictive power of hohlraum simulations.

Band emission↗
DOE OSTI2025

Dynamical control in a prethermalized molecular ultracold plasma: Local dissipation drives global relaxation

Prethermalization occurs as an important phase in the dynamics of isolated many-body systems when coupled degrees of freedom relax in a subspace separated from a state of complete thermodynamic equilibrium by a gap in energy or other conserved quantity. Slow equilibration from a prethermal phase can localize the dynamics of natural and model systems despite high dimensionality and limited disorder. Here, we report the signature of an enduring prethermal regime of arrested relaxation in the molecular ultracold plasma that forms following the avalanche of a state-selected Rydberg gas of nitric oxide. For a wide range of initial conditions, this system enters a critical phase in which a density of NO + and electrons balances a population of Rydberg molecules. Electron collisions mix orbital angular momentum, scattering Rydberg electrons to states of very high ℓ . The rapid predissociation of molecules in states of low- ℓ purifies this high- ℓ ensemble. The angular momentum barrier that separates NO + ions and electrons creates an extraordinary gap between the plasma states of n ≈ ℓ , with measured n > 200 and penetrating states of ℓ = 0 , 1 , and 2. Evolution to a statistically equilibrated state of N and O atoms cannot occur without Rydberg electron penetration, and this gap blocks relaxation for a millisecond or more. A weak radiofrequency (RF) field drives ℓ -mixing electron collisions that erase this gap, causing wholesale dissipation. Remarkably, a local quantum-state transition promoting an exceedingly small fraction of the molecules in the prethermalized ensemble to a predissociative state also acts with a global effect, driving the entire system to a dissipative equilibrium. Using the Lindblad master equation, we illustrate qualitatively similar dynamics for a toy model of an open quantum system that consists of a localized set of spins on which dissipation acts at a single site as a gateway to equilibrium. Published by the American Physical Society 2025

Wang, Ruoxi↗
DOE OSTI2021

Imaging Plasmons with Sub-2 nm Spatial Resolution via Tip-Enhanced Four-Wave Mixing

Four-wave mixing at plasmonic tip-sample nanojunctions may be used to visualize plasmonic fields with sub-2nm spatial resolution under ambient laboratory conditions. We illustrate the latter using a gold-coated atomic force microscopy probe irradiated with a pair of near-IR femtosecond laser pulses and used to interrogate plasmonic gold nanoplates and silver nanocubes. Through diagnostic polarization-dependent tip-only measurements, we illustrate that the 4-wave mixing signal is localized to the tip apex. The apex-bound signal is further enhanced when the tip is located near plasmonic nanoparticles. Overall, this work paves the way for visualizing coherent electronic and vibrational dynamics with joint femtosecond temporal and few-nanometer spatial resolution under ambient conditions.

Wang, Chih-Feng↗
DOE OSTI2024

Analog-antianalog isospin mixing in 47 K 𝛽−decay

Here, we have measured the isospin mixing of the 𝐼 𝜋 =1/2 + , 𝐸 𝑥 = 2.599 MeV state in nearly doubly magic 47 Ca with the isobaric analog 1/2 + state of 47 K . Using the TRIUMF atom trap for 𝛽 decay, we have measured a nonzero asymmetry of the progeny 47 Ca with respect to the initial 47 K spin polarization, which together with the 𝛽 asymmetry implies a nonzero ratio of Fermi to Gamow-Teller matrix elements 𝑦 = 0.098 ± 0.037 for the 1/2 + → 1/2 + transition. Interpreting 𝑦 as mixing between this state and the isobaric analog state implies a Coulomb matrix element magnitude 101 ± 37 keV. This relatively large matrix element supports a model from the literature of analog-antianalog isospin mixing, which predicts large matrix elements in cases involving excess neutrons over protons occupying more than one major shell. The result supports pursuing a search for time-reversal odd, parity-even, isovector interactions using a correlation in 47 K 𝛽 decay.

beta decay↗
DOE OSTI2024

Non-resonant picosecond three-wave mixing in the gas phase

We report on the experimental observation of non-resonant, second-order optical sum-frequency generation (SFG) in five different atomic and molecular gases. The measured signal is attributed to a SFG process by characterizing its intensity scaling and its polarization behavior. We show that the electric quadrupole mechanism cannot explain the observed trends and suggest a mechanism based on symmetry breaking along the incident beam path arising from laser-induced species ground state number density gradients. Our results demonstrate that the SFG is about four orders of magnitude stronger than the third-harmonic generation (THG) and independent from any externally applied electric fields. In conclusion, these features make this method suitable for gas number density measurements at the picosecond time scale in reactive flows and plasmas.

LaCombe, Grayson↗
DOE OSTI2022

Strengthening of nanocrystalline Al using grain boundary solute additions: Effects of thermal annealing and ion irradiation

Strengthening of nanocrystalline Al by grain boundary solute additions was investigated for a series of dilute aluminum alloys, Al-Sc, Al-Sb, Al-Cr, and Al-W with grain sizes in the range of 50–200 nm. Thermal annealing of the alloys at low temperatures led to alloy softening, but with negligible change in the grain size. The re- duction in strength can be attributed to the loss of solute in the grain boundaries arising from grain boundary diffusion and precipitation. Annealing at higher temperatures led to grain growth, but with little additional loss of strength, a result of precipitation hardening. The Al-Sc and Al-Sb alloys were additionally subjected to ion irradiation at various temperatures. Furthermore, these studies revealed that annealed samples regained their hardness due to solute redistribution by ion beam mixing. Alloy strength was independent of grain size between 50 and 150 nms. Irradiation-induced segregation of Sb to grain boundaries in Al-Sb further enhanced strengthening.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural Studies of Alloyed and Nanoparticle Transition Metal Dichalcogenides by Selenium-77 Solid-State Nuclear Magnetic Resonance Spectroscopy

Layered transition metal dichalcogenides (TMDCs) such as MoS 2 , MoSe 2 , and WSe 2 are under intense investigation because they are atomically thin semiconductors with photophysical properties that can be tuned by changing their composition or morphology. Mechanochemical processing has been proposed as a method to obtain alloyed TMDCs in the series Mo 1–x W x S y Se 2–y (x = 0–1; y = 0–2). However, elucidating the chemical transformations occurring at the atomic scale following mechanochemical processing can be challenging because the products are often amorphous or microcrystalline. To address this challenge, we probe TMDC mixing and alloying by using a combination of powder X-ray diffraction, Raman spectroscopy, diffuse reflectance spectroscopy, 77 Se solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and planewave density functional theory (DFT) calculations. The nature of the milling material and reaction atmosphere are shown to be essential factors in limiting the formation of undesired oxide byproducts. We demonstrate acquisition of 77 Se SSNMR spectra using different combinations of Carr-Purcell Meiboom-Gill acquisition (CPMG) pulse sequences, magic angle spinning (MAS), and MAS dynamic nuclear polarization. Further, the combination of SSNMR with the other characterization methods clearly demonstrates that high energy impact ball milling induces molecular level alloying of Mo, W and chalcogen atoms in the family Mo 1–x W x S y Se 2–y . Gauge including projector augmented wave DFT calculations yield accurate 77 Se chemical shift (CS) tensor components. 77 Se SSNMR spectroscopy was also applied to study the structure of WSe 2 nanocrystals intercalated with ethylenediamine. The intercalated WSe 2 nanocrystals exhibit a more positive isotropic 77 Se CS as compared to bulk WSe 2 , however, the 77 Se CS anisotropy is the same, confirming the WSe 2 layers have a similar structure as in their bulk counterparts.

36 MATERIALS SCIENCE↗