Search NASA⌕ Search

SEARCH · Search NASA

Results for “bias field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparison of greenhouse gas emission estimates from six hydropower reservoirs using modeling versus field surveys

As with most aquatic ecosystems, reservoirs play an important role in the global carbon (C) cycle and emit greenhouse gases (GHG) as carbon dioxide (CO 2 ) and methane (CH 4 ). However, GHG emissions from reservoirs are poorly quantified, especially in temperate systems, resulting in high uncertainty. We compared reservoir C emission estimates and uncertainty of diffusive, ebullitive, and degassing pathways in six hydropower reservoirs in the southeastern United States among four data sources: two field-based surveys and two models (including the GHG Reservoir “G-res” Tool). We found that CH 4 diffusion was most similar across data sources (modeled minus observed, bias = - 21 g CO 2-eq m -2 y -1 ) and had low relative uncertainty (coefficient of variation, CV = 0.98). On the other hand, CO 2 diffusion was least consistent across data sources (bias = - 518 g CO 2-eq m -2 y -1 ). Both field surveys indicated strong negative CO 2 diffusion (i.e., CO 2 uptake) at all reservoirs, while G-res estimated positive CO 2 diffusion. By extension, total C emissions showed similar discrepancies, leading to high uncertainty in upscaling and interpreting reservoir source-sink dynamics. Finally, CH 4 ebullition had the highest relative uncertainty (CV = 2.77) due to high variability across sites. We discuss limitations of field surveys and these models, including temperature-based annualization methods, varying definitions of ebullition zones, low sampling resolution, and lack of dynamism. Future field efforts focused on capturing variability in CO 2 diffusion and CH 4 ebullition will be especially valuable in reducing uncertainty and improving models to advance our understanding reservoir GHG emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Evaluating the impact of air terminal geometry on lightning intercept efficacy under a strong background electric field

A comparative analysis of the attachment efficacy of sharpened vs blunted air terminals under a strong background DC electric field, similar to conditions found in naturally occurring lightning events, is presented. Testing was conducted using an oil-free, 17-stage, 1.4 MV bipolar Marx generator with a biased discharge plane that emulated the conditions found prior to the lightning return stroke. The biased discharge plane allowed the introduction of a strong DC electric field and subsequent corona formation on a time scale much longer than the brief duration over which the downward leader propagates. Initial observations indicate that despite a higher background electric field at the sharpened terminals, leading to pre-discharge corona formation where none is seen on the blunt terminal, both the sharpened and blunted terminals exhibit similar attachment probabilities during discharge events, with some discharge events attaching to both terminals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Uncooled GeSn MWIR Photodetectors Using Fully Relaxed Thin Triple‐Step Buffer

GeSn photodetectors monolithically grown on Ge virtual substrates demonstrate mid-wave infrared (MWIR) detection at room temperature. The lattice mismatch between GeSn and Ge causes dislocations and compressive strain, creating leakage pathways and unwanted indirect band transitions. Designed thin Ge 0.91 Sn 0.09 triple-step buffer layers of ≈175 nm total thickness reduce dislocations and enable full relaxation, showing 100% lattice relaxation and smooth surface roughness of 0.83 nm with shorter auto-correlation length in surface morphology compared to single-step buffers. Ge 1-x Sn x photodetectors (x = 0.09, 0.12, and 0.15) on triple-step buffers with n-i-p configurations achieve lattice strain relaxations of 99%, 88%, and 80%, respectively. Ge 0.91 Sn 0.09 and Ge 0.88 Sn 0.12 show gradual variation in auto-correlation amplitude, while Ge 0.85 Sn 0.15 shows an increase due to lattice mismatch. Shockley–Read–Hall recombination current dominates at low reverse bias due to mismatch-induced dislocations, while band-to-band tunneling current dominates at higher reverse bias due to narrowing bandgap under strong electric fields. Here, the photodetectors show extended spectral response with increasing Sn composition of i-GeSn active layer sandwiched by barriers. Ge 0.88 Sn 0.12 and Ge 0.85 Sn 0.15 exhibit extended wavelength cut-offs of 3.12 and 3.27 µm at room temperature, demonstrating significant potential for silicon-based MWIR applications.

GeSn↗
DOE OSTI2020

Permanently Magnetized Insulating Thin-Film Devices by Reduction

A reduction-based manufacturing process for creating technologically important multilayer structures from lattice-matched ferromagnetic insulators and ferromagnetic conductors is reported. The process is demonstrated by growing a permanently magnetized double-layer structure, consisting of lattice-matched conducting (Ni,Co) and insulating (Ni 0.4 Co 0.6 ) 3 O 3 layers, through a single deposition cycle. The orientation of the metal cation network is preserved after reduction. Close-packing displacements of Ni and Co take place in such a manner that the in-plane hexagonal arrangement is preserved. This is critical for ensuring high-quality interfaces joining the layers. At room temperature the hysteresis loop is centered. At low temperature the oxide layer becomes ferrimagnetically ordered, accompanied by a shift of the hysteresis loop along the magnetic field axis. The shift is assigned to exchange bias phenomenon. Biaxial compressive strain is responsible for the required ferrimagnetic ordering. Finally, spin valves and closely related magnetoresistance random access memory and spin-transfer-torque magnetic random access memory devices are addressed as potential applications.

42 ENGINEERING↗
DOE OSTI2025

Unveiling the nature of Ga-based chalcogenides for electrical switching selectors

Three-dimensional phase-change memory with stackable crossbar architecture is a promising technology to meet the urgent demands for high-density storage and rapid information processing in the era of explosive data growth. The performance depends strongly on the properties of ovonic threshold switching (OTS) selectors, which control the on/off states of memory units. Amorphous GaS serves as an outstanding OTS material, distinguished by its sizable mobility gap and high crystallization temperature, while the underlying mechanism continues to be inadequately comprehended. Here, in this work, we systematically studied the structural and electronic properties of amorphous Ga-X (X = S/Se/Te) using first-principles calculations. The results show that Ga atoms adopt tetrahedral motifs, while S/Se/Te atoms predominantly exhibit the structure of a distorted triangular pyramid. This structural arrangement is ascribed to the substantial dative bonds formed by the lone-pair electrons of the anions and the vacant sp3 orbitals around Ga atoms. Large mobility gaps (e.g., GaS: 2.43 eV, GaSe: 1.76 eV, GaTe: 1.26 eV) and distinct mid-gap states (e.g., ∼0.66 eV above valence band tail) ensure that these three chalcogenide glasses can be switched on under an external electric field while effectively suppressing leakage current without a bias, and the defect electronic states originate from short, robust Ga-Ga bonds due to the formation of distorted chain-like local structures. Our research elucidates the mechanisms of amorphous Ga-X as OTS materials, enriching the spectrum of electrical switching selectors by incorporating III-VI chalcogenides. This inclusion offers novel opportunities for the refinement and optimization of high-density integrated memory systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Exploring cryo-electron microscopy with molecular dynamics

Single particle analysis cryo-electron microscopy (EM) and molecular dynamics (MD) have been complimentary methods since cryo-EM was first applied to the field of structural biology. The relationship started by biasing structural models to fit low-resolution cryo-EM maps of large macromolecular complexes not amenable to crystallization. The connection between cryo-EM and MD evolved as cryo-EM maps improved in resolution, allowing advanced sampling algorithms to simultaneously refine backbone and sidechains. Moving beyond a single static snapshot, modern inferencing approaches integrate cryo-EM and MD to generate structural ensembles from cryo-EM map data or directly from the particle images themselves. We summarize the recent history of MD innovations in the area of cryo-EM modeling. The merits for the myriad of MD based cryo-EM modeling methods are discussed, as well as, the discoveries that were made possible by the integration of molecular modeling with cryo-EM. Lastly, current challenges and potential opportunities are reviewed.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Clustering in massive neutrino cosmologies via Eulerian Perturbation Theory

We introduce an Eulerian Perturbation Theory to study the clustering of tracers for cosmologies in the presence of massive neutrinos. Our approach is based on mapping recently-obtained Lagrangian Perturbation Theory results to the Eulerian framework. We add Effective Field Theory counterterms, IR-resummations and a biasing scheme to compute the one-loop redshift-space power spectrum. To assess our predictions, we compare the power spectrum multipoles against synthetic halo catalogues from the QUIJOTE simulations, finding excellent agreement on scales k ≲ 0.25 h Mpc-1. One can obtain the same fitting accuracy using higher wave-numbers, but then the theory fails to give a correct estimation of the linear bias parameter. We further discuss the implications for the tree-level bispectrum. Finally, calculating loop corrections is computationally costly, hence we derive an accurate approximation wherein we retain only the main features of the kernels, as produced by changes to the growth rate. As a result, we show how FFTLog methods can be used to further accelerate the loop computations with these reduced kernels.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Unveiling the transferability of PLSR models for leaf trait estimation: lessons from a comprehensive analysis with a novel global dataset

Leaf traits are essential for understanding many physiological and ecological processes. Partial least squares regression (PLSR) models with leaf spectroscopy are widely applied for trait estimation, but their transferability across space, time, and plant functional types (PFTs) remains unclear. We compiled a novel dataset of paired leaf traits and spectra, with 47 393 records for >700 species and eight PFTs at 101 globally distributed locations across multiple seasons. Using this dataset, we conducted an unprecedented comprehensive analysis to assess the transferability of PLSR models in estimating leaf traits. While PLSR models demonstrate commendable performance in predicting chlorophyll content, carotenoid, leaf water, and leaf mass per area prediction within their training data space, their efficacy diminishes when extrapolating to new contexts. Specifically, extrapolating to locations, seasons, and PFTs beyond the training data leads to reduced R 2 (0.12–0.49, 0.15–0.42, and 0.25–0.56) and increased NRMSE (3.58–18.24%, 6.27–11.55%, and 7.0–33.12%) compared with nonspatial random cross-validation. The results underscore the importance of incorporating greater spectral diversity in model training to boost its transferability. These findings highlight potential errors in estimating leaf traits across large spatial domains, diverse PFTs, and time due to biased validation schemes, and provide guidance for future field sampling strategies and remote sensing applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Measured Performance of Over the Range Microwave Range Hoods

The California residential building code requires kitchen exhaust ventilation to protect indoor air quality. The requirement can be met with a kitchen exhaust fan or a range hood that conforms to airflow and sound specifications based on certified, standard test results. Appliances that integrate an exhaust fan with an over the range microwave (OTRs) are popular for their space saving utility; but for years there were none with the certified performance data required for building code compliance. This project, initiated during that period, aimed to evaluate OTR models found in new California homes and compare their performance to range hoods that minimally met code requirements. The study aimed to expand on limited information available about OTR performance with a particular focus on measuring the fraction of cooktop-generated air pollutants that are captured and removed by the exhaust devices, a parameter called “capture efficiency”. Airflow and capture efficiency (CE) were measured in a simulated kitchen in Berkeley Lab’s FLEXLAB facility. Airflows were measured using several variations of a balanced-pressure flow method (Walker et al. 2001) including a protocol that had been used in the California Healthy Efficient New Gas Homes (HENGH) field study. Measurements were made for six OTRs observed in the field study, including three with certified test results (published after the start of this project) for airflow and sound. Measurements were also made on two standard range hoods with comparable airflows and costs to the OTRs, when accounting for the microwave functionality. CE was measured using the CO 2 emitted from burners while heating pots of water (POW) as a tracer and calculating the ratio of added CO 2 in the exhaust flow over the total CO 2 generated from burning fuel. Results show that OTRs generally met the California code requirements for airflow, which are the same as those of the residential ventilation standard of ASHRAE. It was determined that the field protocol used in HENGH study homes was biased low by ~14% on average. The CE performance of OTRs tested in this study were consistent with those tested under controlled conditions in prior studies, showing CE increasing with airflow and being higher for emissions occurring at the back cooktop burner(s) compared with front burner emissions. The measured CE covered a range of 40% to 85% for the front burners and 60% to 100% for the back burners. The relationship of CE to airflow for OTRs was within the range of those found for standard range hoods in this study and prior studies, with the key caveat that OTRs appear to have more consistent CE performance for emissions on the front burner.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Blade Designs For Improved Multi-Phase Performance In sCO 2 Compressors; Part II - Optical Diagnostics In sCO 2 And Experimental Evaluation With Particle Image Velocimetry

This paper presents the second part of a study in which the leading-edge and suction surface of a compressor blade was modified to delay onset of phase change for sCO 2 compressors operating near the critical point. Using a first-of-its-kind apparatus for the measurement of sCO 2 flow fields, Particle Image Velocimetry (PIV) is used for local flow field measurements of two compressor blade geometries: the modified “biased-wedge,” and a conventional constant thickness blade. Utilizing the developed hardware, the feasibility of a simple, laser-based diagnostic for qualitatively measuring liquid phase regions, is also presented. The design of the optical diagnostics rig, a discussion of numerous challenges, and necessary considerations involved in performing optical-based measurements like PIV, in sCO 2 , are discussed. Velocity field measurements for the modified compressor profile show a much lower suction peak compared to a conventional blade. Furthermore, these results validate numerical results at the tested conditions, where the suction side profile of the biased wedge works to minimize the local pressure gradient.

14 SOLAR ENERGY↗
DOE OSTI2022

Interdigitated electrode geometry variation and external quantum efficiency of GaN/AlGaN-based metal-semiconductor-metal UV photodetectors

Aluminum gallium-nitride (Al x Ga 1–x N)-based metal–semiconductor–metal (MSM) ultraviolet photodetectors photodetectors (PD’s) have been successfully designed and fabricated using conventional photolithography techniques and tested experimentally to study their spectral sensitivity across different Al content, x, with x varying from 0 to 0.3. (Al)GaN-based UV PD’s have wide and tunable direct band gaps. The ability to easily select the photodetected wavelength by simply varying the aluminum content of GaN thin film (Al x Ga 1–x N) is a significant advantage of these group III–V compounds. Typically, MSM PD’s grown on (Al)GaN thin films result in ultrafast photodetection because of their highly mobile carriers. These devices are limited by the carrier transit time due to the negligible capacitance presented by the interdigitated fingers. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the devices’ performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Here, coupled with the independently measured Hall mobility and electric field, we computed the carrier transit time of the devices to be as short as 1.31 ps and the bias-voltage–independent external quantum efficiencies were as high as 70% at 60 V for n-doped and intrinsic devices when operated in the reverse bias regime. Here, (Al x )Ga 1–x N photodetectors were designed to explore spectral sensitivity by altering x from 0 to 0.3.

42 ENGINEERING↗
DOE OSTI2025

E3SM‐Arctic: Regionally Refined Coupled Model for Advanced Understanding of Arctic Systems Interactions

Earth system models are essential tools for climate projections, but coarse resolutions limit regional accuracy, especially in the Arctic. Regionally refined meshes (RRMs) enhance resolution in key areas while maintaining computational efficiency. This paper provides an overview of the United States (U.S.) Department of Energy's (DOE's) Energy Exascale Earth System Model version 2.1 with an Arctic RRM, hereafter referred to as E3SMv2.1-Arctic, for the atmosphere (25 km), land (25 km), and ocean/ice (10 km) components. We evaluate the atmospheric component and its interactions with land, ocean, and cryosphere by comparing the RRM (E3SM2.1-Arctic) historical simulations (1950–2014) with the uniform low-resolution (LR) counterpart, reanalysis products, and observational data sets. The RRM generally reduces biases in the LR model, improving simulations of Arctic large-scale mean fields, such as precipitation, atmospheric circulation, clouds, atmospheric river frequency, and sea ice thickness. However, it introduces a seasonally dependent surface air temperature bias, reducing the LR cold bias in summer but enhancing the LR warm bias in winter, which contributes to the underestimated winter sea ice area and volume. Radiative feedback analysis shows similar climate feedback strengths in both model configurations, with the RRM exhibiting a more positive surface albedo feedback and contributing to a stronger surface warming than LR. These findings underscore the importance of high-resolution modeling for advancing our understanding of Arctic climate changes and their broader global impacts, although some persistent biases appear to be independent of model resolution at 10–100 km scales.

Energy Exascale Earth System Model (E3SM)↗
DOE OSTI2025

Observation of Persistent Zero Modes and Superconducting Vortex Doublets in UTe 2

Superconducting vortices can reveal electron pairing details and nucleate topologically protected states. Yet, vortices of bulk spin-triplet superconductors have never been visualized at the atomic scale. Recently, UTe 2 has emerged as a prime spin-triplet superconductor, but its superconducting order parameter is elusive, and whether time-reversal symmetry (TRS) is broken remains unsettled. Here, in this work, we visualize vortices on the (011) surface of ultraclean UTe 2 single crystals (T c = 2.1 K) using scanning tunneling microscopy (STM). We introduce $\frac{d^{2}𝐼}{d𝑉^{2}}$ imaging as an effective technique for vortex visualization in superconductors with substantial residual zero-energy density of states (DOS), as in UTe 2 . Anisotropic single-flux-quantum vortices, with coherence lengths of ∼12 nm (4 nm) parallel (perpendicular) to the a -axis, form a triangular vortex lattice (VL) under a small out-of-plane magnetic field. The invariance of vortex structures and VL under changes of field polarity and cooling history strongly supports time-reversal invariant superconductivity under zero field. At vortex cores (VCs), nonsplit, spectrally sharp zero-bias conductance peaks (ZBPs) persist up 8 T that are consistent with symmetry-protected Majorana zero modes (MZMs) in a topological vortex line. Close examination of vortex structures reveals a mirror-asymmetric doublet─one with ZBPs and another with an enhanced apparent gap, possibly originating from a field-induced multicomponent order parameter.

UTe2↗
DOE OSTI2021

Ferroelectric polarization retention with scaling of Hf 0.5 Zr 0.5 O 2 on silicon

In this paper, we investigate the polarization retention of Hf 0.5 Zr 0.5 O 2 (HZO)-based metal–ferroelectric–insulator–Si (MFIS) capacitors with scaling of the ferroelectric (FE) layer thickness from 5 nm to 20 nm. The capacitors have a constant interface layer capacitance of ~24 μF/cm 2 , developed due to the integration of HZO on a degenerated Si as a bottom conducting electrode. It is observed that 20 nm HZO films show a small change (~5%) in FE polarization (P FE ) between short (10 μs) and long (6 s) retention time, while 5-nm-thick films exhibit a large difference (~90%). Furthermore, the dependence of P FE retention loss on the FE thickness can be understood by the presence of a built-in electric field in the FE layer, generated due to charge continuity between the FE and the interface layers in the ground state without any external bias. A direct experimental observation also confirms that a residual voltage is developed at the node between the metal–ferroelectric–metal and metal–oxide–semiconductor capacitors connected in series, in the ground state with zero external bias. It is expected that a proper understanding of the built-in field developed in the FE layer in an MFIS stack is crucial for FE memory retention characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Imprint of Southern Ocean Storms on Modeled Surface Chlorophyll, Their Drivers and Satellite Biases

Southern Ocean (SO) phytoplankton chlorophyll is highly variable on sub-seasonal time scales. Although the SO is the windiest ocean basin globally, it is not conclusively understood how storms impact SO phytoplankton dynamics. Much of our existing knowledge stems from satellites, but biases due to data gaps from cloud cover and low solar angles remain unquantified. Here, we use ocean–sea-ice simulations with the Community Earth System Model to quantify the climatological 1997–2018 imprint of storms on chlorophyll and phytoplankton dynamics in the ice-free SO. Additionally, by comparing the full-field model output to synthetic satellite observations, we quantify sampling biases in satellite-derived estimates. We find that both the sign and the magnitude of the average surface chlorophyll imprint vary substantially across storms but last for at least 4 days after the storm passing. Based on our analysis, more than one third of the storms explain the majority of local non-seasonal chlorophyll variability, but satellite-derived storm imprints are often too large in magnitude. On the day of the storm passing, changes in vertical mixing predominantly cause surface chlorophyll anomalies, and reduced light availability due to enhanced cloud cover outweighs the enhanced nutrient availability due to entrainment. Interestingly, storms imprint differently on total net primary production than on surface chlorophyll, demonstrating the difficulty to derive carbon-cycle impacts from a surface-chlorophyll assessment. With SO future storm activity projected to increase, complementing satellite observations with other observing technologies, for example, profiling floats, is necessary to better constrain how storms impact biological carbon cycling in the SO.

Nissen, Cara [University of Colorado, Boulder, CO ↗
DOE OSTI2024

Redshift-dependent RSD bias from intrinsic alignment with DESI Year 1 spectra

ABSTRACT We estimate the redshift-dependent, anisotropic clustering signal in the Dark Energy Spectroscopic Instrument (DESI) Year 1 Survey created by tidal alignments of Luminous Red Galaxies (LRGs) and a selection-induced galaxy orientation bias. To this end, we measured the correlation between LRG shapes and the tidal field with DESI’s Year 1 redshifts, as traced by LRGs and Emission-Line Galaxies. We also estimate the galaxy orientation bias of LRGs caused by DESI’s aperture-based selection, and find it to increase by a factor of seven between redshifts 0.4−1.1 due to redder, fainter galaxies falling closer to DESI’s imaging selection cuts. These effects combine to dampen measurements of the quadrupole of the correlation function (ξ2) caused by structure growth on scales of 10–80 h−1 Mpc by about 0.15 per cent for low redshifts (0.4 < z < 0.6) and 0.8 per cent for high (0.8 < z < 1.1), a significant fraction of DESI’s error budget. We provide estimates of the ξ2 signal created by intrinsic alignments that can be used to correct this effect, which is necessary to meet DESI’s forecasted precision on measuring the growth rate of structure. While imaging quality varies across DESI’s footprint, we find no significant difference in this effect between imaging regions in the Legacy Imaging Survey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

High-power terahertz pulse generation from bias-free nanoantennas on graded composition InGaAs structures

We present a bias-free photoconductive emitter that uses an array of nanoantennas on an InGaAs layer with a linearly graded Indium composition. The graded InGaAs structure creates a built-in electric field that extends through the entire photoconductive active region, enabling the efficient drift of the photo-generated electrons to the nanoantennas. The nanoantenna geometry is chosen so that surface plasmon waves are excited in response to a 1550 nm optical pump to maximize photo-generated carrier concentration near the nanoantennas, where the built-in electric field strength is maximized. With the combination of the plasmonic enhancement and built-in electric field, high-power terahertz pulses are generated without using any external bias voltage. We demonstrate the generation of terahertz pulses with 860 µW average power at an average optical pump power of 900 mW, exhibiting the highest radiation power compared to previously demonstrated telecommunication-compatible terahertz pulse emitters.

42 ENGINEERING↗
DOE OSTI2022

Development of planar P-type point contact germanium detectors for low-mass dark matter searches

The detection of low-energy deposition in the range of sub-eV through ionization using germanium (Ge) with a bandgap of ~ 0.7 eV requires internal amplification of the charge signal. This can be achieved through high electric field that accelerates charge carriers, which can then generate more charge carriers. The minimum electric field required to generate internal charge amplification is derived for different temperatures. We report the development of a planar point contact Ge detector in terms of its fabrication and the measurements of its leakage current and capacitance as a function of applied bias voltage. With the determination of the measured depletion voltage, the field distribution is calculated using GeFiCa, which predicts that the required electric field for internal charge amplification can be achieved in proximity to the point contact. The energy response to an Am-241 source is characterized and discussed. We conclude that such a detector with internal charge amplification can be used to search for low-mass dark matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗