Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Does the Al substitution in C-S-H(I) change its mechanical property?

This study examines the influence of Al substitution for Si on the bulk modulus of calcium silicate hydrate I [C-S-H(I)], a structural analogue of C-S-H, by performing high-pressure synchrotron X-ray diffraction experiments in two C-S-H(I) samples: one a hydration product of alkali-activated slag and the other a synthetic C-S-H(I). The test result shows that not only the bulk modulus but also the incompressibility of the lattice parameters a, b, and c of two C-S-H(I) samples are very similar to each other, regardless of the Al substitution. This result may be due to the four-coordinated configuration of the substituted Al, which makes the dreierketten silicate chains maintain the same arrangement after the substitution.

36 MATERIALS SCIENCE↗

MnNiO 3 revisited with modern theoretical and experimental methods

MnNiO 3 is a strongly correlated transition metal oxide that has recently been investigated theoretically for its potential application as an oxygen-evolution photocatalyst. However, there is no experimental report on critical quantities such as the band gap or bulk modulus. Recent theoretical predictions with standard functionals such as LDA+U and HSE show large discrepancies in the band gaps (about 1.23 eV), depending on the nature of the functional used. Hence there is clearly a need for an accurate quantitative prediction of the band gap to gauge its utility as a photocatalyst. In this work, we present a diffusion quantum Monte Carlo study of the bulk properties of MnNiO 3 and revisit the synthesis and experimental properties of the compound. We predict quasiparticle band gaps of 2.0(5) eV and 3.8(6) eV for the majority and minority spin channels, respectively, and an equilibrium volume of 92.8 Å 3 , which compares well to the experimental value of 94.4 Å 3 . A bulk modulus of 217 GPa is predicted for MnNiO 3 . As a result, we rationalize the difficulty for the formation of ordered ilmenite-type structure with specific sites for Ni and Mn to be potentially due to the formation of antisite defects that form during synthesis, which ultimately affects the physical properties of MnNiO 3 .

36 MATERIALS SCIENCE↗

Deep potential development of transition-metal-rich carbides

In this study, we developed DeepPot-SE type potentials according to the High-Entropy Strategy for Cr 23 C 6 , Fe 23 C 6 , W 23 C 6 , and Mo 23 C 6 systems. Predictive molecular dynamics are then conducted according to various elastic and mechanical properties. Training dataset accuracy is confirmed both numerically and visually. Elastic constants, Poisson Ratio, and bulk modulus are determined and compared to the literature with percent errors ranging between 0.45 and 13.33%. Ground-state lattice constants yield 0.111–1.375% percent error. Linear lattice constant thermal expansion trends are found from 300 to 1500 K as expected. Melting behaviors with clear melting points are observed for each binary. Here, the Birch–Murnaghan Equation of State is suitably fit, providing additional verification of the bulk modulus calculations. Polycrystalline thermal stability is also verified for each binary potential.

36 MATERIALS SCIENCE↗

Softening of breathing elastic mode and trigonal elastic mode in the disordered pyrochlore magnet NaCaCo 2 F 7

Cobalt pyrochlore fluoride NaCaCo 2 F 7 is a disordered frustrated magnet that is composed of Co 2+ ions with an effective spin-12 magnetic moment and that exhibits spin freezing below $T_f ~$ 2.4 K. Here, we perform ultrasound velocity measurements on a single crystal of the cubic NaCaCo 2 F 7 . The temperature dependence of the bulk modulus (the breathing elastic mode) exhibits Curie-type softening upon cooling below ~20 K down to $T_f$, which is suppressed by the magnetic field. This Curie-type softening should be a precursor to the enhancement of the strength of exchange disorder via the spin-lattice coupling, which causes the spin freezing. In contrast to the magnetic-field-suppressed Curie-type softening in the bulk modulus, the trigonal shear modulus exhibits softening with a characteristic minimum upon cooling, which is enhanced by the magnetic field at temperatures below ~20 K. This magnetic-field-enhanced elastic anomaly in the trigonal shear modulus suggests a coupling of the lattice to the dynamical spin-cluster state. For NaCaCo 2 F 7 , the observed elastic anomalies reveal an occurrence of magnetic-field-induced crossover from an isostructural lattice instability toward the spin freezing to a trigonal lattice instability arising from the emergent dynamical spin-cluster state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of state of gallium oxide to 70 GPa: Comparison of quasihydrostatic and nonhydrostatic compression

Synchrotron x-ray diffraction and diamond-anvil cell techniques were used to characterize pressure induced structural modifications in gallium oxide. Gallium oxide was studied on compression up to 70 GPa and on the following decompression. The effect of the pressure-transmitting medium on the structural transformations was investigated in two sets of compression and decompression runs, one with nitrogen as a quasihydrostatic pressure-transmitting medium and the other in nonhydrostatic pressure conditions. The x-ray diffraction data showed gradual phase transition from a low-density, monoclinic {beta}-Ga{sub 2}O{sub 3} to a high-density, rhombohedral {alpha}-Ga{sub 2}O{sub 3}. With the use of nitrogen as a pressure transmitting medium, the {beta}- to {alpha}-Ga{sub 2}O{sub 3} transition begins at about 6.5-7 GPa and extends up to {approx}40 GPa, confirming recent theoretical calculations. This pressure-driven transition is irreversible and the material decompressed from 70 GPa to ambient conditions was composed, in both sets of experimental runs, of {alpha}-Ga{sub 2}O{sub 3} only. A Birch-Murnaghan fit of the unit cell volume as a function of pressure yielded a zero pressure bulk modulus K{sub 0}=199(6) GPa, and its pressure derivative K{sub 0}'=3.1(4) for the {beta}-Ga{sub 2}O{sub 3} phase, and K{sub 0}=220(9) GPa and K{sub 0}'=5.9(6) for the {alpha}-Ga{sub 2}O{sub 3} phase for the experiments performed in quasihydrostatic compression conditions. When for the same experiment K{sub 0}' is held at 4, then the bulk modulus values are 184(3) and 252(14) GPa for {beta}-Ga{sub 2}O{sub 3} and the {alpha}-Ga{sub 2}O{sub 3}, respectively. We compare the results of this work with our previous studies on the high-pressure behavior of nanocrystalline gallium oxide.

36 MATERIALS SCIENCE↗

Pressure-driven mechanical anisotropy and destabilization in zeolitic imidazolate frameworks

Here, the anisotropic mechanical response of ZIF-8 and ZIF-67 is investigated as a function of pressure and its main features (including shear-destabilization eventually leading to amorphization) discussed in terms of specific lattice vibrations and structural changes occurring in the framework. At zero pressure, the two ZIFs are characterized by an elastic anisotropy with directions of maximum and minimum stiffness along < 111 > and < 100 >, respectively. At P = 0.2 GPa, the framework exhibits a perfectly isotropic mechanical response, while at P > 0.2 GPa a different (complementary) anisotropic response is observed with directions of maximum and minimum stiffness along < 100 > and < 111 >, respectively. The bulk modulus of the two ZIFs initially slightly increases up to 0.1 GPa of pressure and then decreases at higher pressures. Amorphization in both ZIF-8 and ZIF-67 is confirmed to be due to the pressure-driven mechanical instability of their frameworks to shear deformations. The directional elastic moduli of the two ZIFs are partitioned into contributions from specific normal modes of vibration. The elastic constants C 11 , and C 12 [and thus the bulk modulus K = 1/3(C 11 +2C 12 )] are mostly affected by symmetric “gate-opening” vibrations of the imidazolate linkers in the four-membered rings. The C 44 shear elastic constant (and thus the mechanical instability and amorphization of the framework) are instead related to asymmetric “gate-opening” vibrations of the four-membered rings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical investigations of the physical properties of zircon-type YVO{sub 4}

The crystal structure, electronic properties, elastic properties, hardness and thermodynamic properties of the laser host material zircon-type YVO{sub 4} are studied using the pseudopotential plane wave method within the local density approximation (LDA) and generalized gradient approximation (GGA). The calculated ground state values such as lattice parameter, bulk modulus and its pressure derivative, the band structure and densities of states were in favorable agreement with previous works and the existed experimental data. The elastic constants C{sub ij}, the aggregate elastic moduli (B, G, E), Poisson's ratio and elastic anisotropy have been investigated. In YVO{sub 4}, V-O bonds with shorter bond length and larger Mulliken population make great contribution to hardness than Y-O bonds. Using quasi-harmonic Debye model considering the phonon effects, bulk modulus, heat capacity and thermal expansion coefficient of YVO{sub 4} are calculated within a range of 0-6 GPa and 0-1200 K. - Graphical Abstract: (a) Directional dependence of Young's modulus in zircon-type YVO{sub 4} and (b) projections of the directional dependent Young's modulus in different planes for zircon-type YVO{sub 4}. The units are in GPa. Highlights: Black-Right-Pointing-Pointer This paper systematically studied the physical properties of zircon-type YVO{sub 4} from first-principles calculations. Black-Right-Pointing-Pointer Zircon-type YVO{sub 4} is mechanically stable and it is ductile for B/G>1.75 and v>0.26. Black-Right-Pointing-Pointer Universal elastic anisotropy index A{sup U} for zircon-type YVO{sub 4} is 2.41, so YVO{sub 4} is anisotropic. Black-Right-Pointing-Pointer V-O bonds with shorter bond length and larger Mulliken population make greater contribution to the hardness of YVO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Fe on the equation of state of mantle silicate perovskite over 1 Mbar

In order to investigate the effect of Fe on the equation of state (EOS), the volume of the perovskite (Pv) phases, (Mg{sub 1-x}Fe{sub x})SiO{sub 3}, with different Fe contents (x=0, 0.09, 0.15), has been measured at high pressures up to 1 Mbar in an Ar or NaCl medium. A bulk modulus (K{sub 0}) ranging between 255 and 261 GPa is obtained when the Au scales consistent with the Pt scale are used and the data are fit to the second order Birch-Murnaghan (BM) equation. When the third order BM equation is used, we obtain K{sub 0} = 250-264 GPa and K{sub 0}' = 3.7-4.5, which is consistent with previous low-pressure X-ray diffraction and Brillouin measurements. Within experimental uncertainties (0.5% in volume and 6% in bulk modulus), we do not resolve differences in the EOS between Fe-bearing (up to 15%) and Fe-free Pv to 1 Mbar (2600-km depth in the mantle). This is in contrast with the much larger effect of the Fe spin transition for the EOS of ferropericlase (Fp) reported recently. This is perhaps due to much more diverse states of Fe (e.g., oxidation, coordination, and spin states) in Pv than in Fp.

58 GEOSCIENCES↗

Effect of pressure and composition on lattice parameters and unit-cell volume of (Fe,Mg)SiO[subscript 3] post-perovskite

We obtained unit-cell volumes (V) for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} post-perovskite (PPv) over a pressure (P) range of 80-145 GPa by in-situ X-ray diffraction (XRD) measurements in laser-heated diamond anvil cells (DACs). Our study suggests that the PPv structure is highly resistant to back transformation to Pv and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv was preserved down to 80 GPa upon laser heating during decompression before transforming to pure perovskite (Pv). The bulk modulus (K{sub 0}) of PPv was determined to be 215(1) and 198(1) GPa for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv respectively, with a fixed K'{sub 0} = 4. The substitution of Fe for Mg in PPv results in the largest expansion along the b-axis among all three axes and the expansion of the b-axis is nearly independent of pressure whereas the expansion along the a and c directions slightly decreases with increasing pressure. Combining our results with previous studies on (Fe{sub x},Mg{sub 1-x})SiO{sub 3} PPv (x = 0, 0.09, 0.1) shows that the bulk modulus of PPv decreases with increasing Fe content over a composition range x = 0 to 0.4, varying from 231 GPa for x = 0 to 198 GPa for x = 0.4 with zero pressure volumes scaled to composition, V{sub 0} ({angstrom}{sup 3}) = 162.2 + 19.5x and fixed K'{sub 0} = 4.0. The increase of Fe content in PPv from x = 0 to 0.4 results in a 6.3% increase in density and a 5.3% decrease in bulk sound velocity at 130 GPa.

58 GEOSCIENCES↗

First principle calculations of structural phase transition and electronic properties in AmTe

The tight-binding linear muffin-tin orbital (TB-LMTO) with in the local density approximation is used to calculate total energy, lattice parameters, bulk modulus, density of states and energy band structure of americium telluride at ambient as well as at high pressure. It is found that AmTe is stable in NaCl – type structure under ambient pressure. The phase transition pressure was found to be 15.0 GPa from NaCl-type (B{sub 1}-phase) structure to CsCl-type (B{sub 2}-phase) structure for this compound. From energy band diagram it is observed that AmTe exhibit metallic behaviour. The calculated ground state properties such as lattice parameters and bulk modulus are in general good agreement with the available results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anorthite: Thermal equation of state to high pressures

The shock wave (Hugoniot) data on single crystal and porous anorthite (CaAl2Si208) to pressures of 120 GPa are presented. These data are inverted to yield high pressure values of the Grueneisen parameter, adiabatic bulk modulus, and coefficient of thermal expansion over a broad range of pressures and temperatures which in turn are used to reduce the raw Hugoniot data and construct an experimentally based, high pressure thermal equation of state for anorthite. The hypothesis that higher order anharmonic contributions to the thermal properties decrease more rapidly upon compression than the lowest order anharmonicities is supported. The properties of anorthite corrected to lower mantle conditions show that although the density of anorthite is comparable to that of the lower most mantle, its bulk modulus is considerably less, hence making enrichment in the mantle implausible except perhaps near its base.

Jeanloz, R.↗

Effects of Porosity and Pore Microstructure on the Elastic Properties of Unpoled PZT 95/5-2Nb

Effects of porosity level and pore morphology on the isotropic elastic responses of unpoled porous PZT 95/5-2Nb ferroelectric ceramic are characterized using a simple isotropic elastic response model giving relations between the average stresses and strains of the porous ceramic and the solid matrix surrounding the pores. The model parameters depend on the elastic properties of the solid ceramic material, volume fraction of pores, and two additional material properties that reflect the composition and microstructure of the composite material. Measurements of the effective bulk modulus and shear modulus of the porous ceramic, with corresponding expressions for these quantities from the response model, allow characterization of the additional material properties. It is found that the two material properties reflecting the effect of pore morphology and grain size on the elastic response of unpoled porous PZT 95/5-2Nb ferroelectric ceramics can be expressed in a form that depends explicitly on the porosity level and two parameters dependent solely on the pore morphology and ceramic grain size. Two applications of the model are presented: a simple prediction of the effective bulk modulus and shear modulus for the porous ceramic as a function of porosity for the pore morphologies and grain sizes examined, and a prediction of the effective volume strains, including effects due to the ferroelectric to antiferroelectric phase transformation, for the various ceramics during hydrostatic pressurization.

36 MATERIALS SCIENCE↗

Equation of State and High Pressure Irreversible Amorphization in Y[subscript 3] Fe[subscript 5]O[subscript 12]

The change of crystal structure in yttrium iron garnet Y{sub 3}Fe{sub 5}O{sub 12} was studied at room temperature at high pressures up to {approx}55 GPa by the x-ray diffraction technique in diamond anvil cells. At a pressure of about {approx}50 GPa, a drastic change in the x-ray diffraction pattern was observed indicating the transition into an amorphouslike state. When the pressure was increased, the bulk modulus of YIG was found to be 193 {+-} 4 GPa. It was also found that the amorphous state was retained after decompression down to ambient pressure. From the shape of x-ray patterns in the 'amorphous' phase, it was concluded that the local atomic structure consists of iron-oxygen FeO{sub 6} octahedral complexes with disordered orientations of local axis and of randomly arranged others ion fragments with the overall Y{sub 3}Fe{sub 5}O{sub 12} composition. For the amorphous phase, it was evaluated that the bulk modulus of FeO{sub 6} octahedral complexes is about 260 GPa.

36 MATERIALS SCIENCE↗

Structural response in FeCl2 (iron chloride) to pressure-induced electro-magnetic transitions

High pressure (HP) synchrotron x-ray diffraction studies were carried out in FeCl{sub 2} together with resistivity (R) studies, at various temperatures and pressures to 65 GPa using diamond anvil cells. This work follows a previous HP {sup 57}Fe Mossbauer study in which two pressure-induced (PI) electronic transitions were found interpreted as: (i) quenching of the orbital-term contribution to the hyperfine field concurring with a tilting of the magnetic moment by 55 degrees and (ii) collapse of the magnetism concurring with a sharp decrease of the isomer shift (IS). The R(P,T) studies affirm that the cause the collapse of the magnetism is a PI p-d correlation breakdown, leading to an insulator-metal transition at {approx}45 GPa and is not due to a spi-Ir,crossover (S=2 {yields} S=0). The structure response to the pressure evolution of the two electronic phase transitions starting at low pressures (LP), through an intermediate phase (IP) 30-57 GPa, and culminating in a high-pressure phase (HP), P >32 GPa, can clearly be quantified. The IP-HP phases coexist through the 32-57 GPa range in which the HP abundance increases monotonically at the expense of the IP phase. At the LP-IP interface no volume change is detected, yet the c-axis increases and the a-axis shrinks by 0.21 Angstroms and 0.13 Angstroms, respectively. The fit of the equation of state of the combined LP-IP phases yields a bulk modulus K{sub 0} = 35.3(1.8) GPa. The intralayer CI-CI distances increases, but no change is observed in Fe-CI bond-length nor are there substantial changes in the interlayer spacing. The pressure-induced electronic IP-HP transition leads to a first-order structural phase transition characterized by a decrease in Fe-CI bond length and an abrupt drop in V(P) by {approx}3.5% accompanying the correlation breakdown. In this transition no symmetry change is detected,and the XRD data could be satisfactorily fitted with the CdI{sub 2} structure. The bulk modulus of the HP phase is practically the same as that of the LP-IP phases suggesting negligible changes in the phonon density of state.

36 MATERIALS SCIENCE↗

Hardness, elastic, and electronic properties of chromium monoboride

Here, we report high-pressure synthesis of chromium monoboride (CrB) at 6 GPa and 1400 K. The elastic and plastic behaviors have been investigated by hydrostatic compression experiment and micro-indentation measurement. CrB is elastically incompressible with a high bulk modulus of 269.0 (5.9) GPa and exhibits a high Vickers hardness of 19.6 (0.7) GPa under the load of 1 kg force. Based on first principles calculations, the observed mechanical properties are attributed to the polar covalent Cr-B bonds interconnected with strong zigzag B-B covalent bonding network. The presence of metallic Cr bilayers is presumably responsible for the weakest paths in shear deformation.

36 MATERIALS SCIENCE↗

Pressure-Induced Invar Behavior in Pd[subscript 3]Fe

Synchrotron x-ray diffraction (XRD) measurements, nuclear forward scattering (NFS) measurements, and density functional theory (DFT) calculations were performed on L1{sub 2}-ordered Pd{sub 3}Fe. Measurements were performed at 300 K at pressures up to 33 GPa, and at 7 GPa at temperatures up to 650 K. The NFS revealed a collapse of the Fe57 magnetic moment between 8.9 and 12.3 GPa at 300 K, coinciding with a transition in bulk modulus found by XRD. Heating the sample under a pressure of 7 GPa showed negligible thermal expansion from 300 to 523 K, demonstrating Invar behavior. Zero-temperature DFT calculations identified a ferromagnetic ground state and showed several antiferromagnetic states had comparable energies at pressures above 20 GPa.

36 MATERIALS SCIENCE↗

Structural studies on Na[subscript 0.75]CoO[subscript 2] thermoelectric material at high pressures

The crystal structure of Na{sub 0.75}CoO{sub 2} was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co-O bond lengths and a decrease in Na-O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.

36 MATERIALS SCIENCE↗

Thermodynamic properties of La{sub 1−x}A{sub x}CoO₃ (A=K, Cd, Pr and Nd)

We have calculated the thermal and allied properties of La{sub 1–x}A{sub x}CoO₃ (A=K, Cd, Pr, Nd and 0≤x≤1) as a function of temperature 1 K≤T≤300 K for the first time using Modified Rigid Ion Model (MRIM). The calculated bulk modulus, specific heat, thermal expansion and other thermodynamic properties obtained from MRIM have presented proper interpretation of the experimental data, for monovalent (K⁺), divalent (Cd₂⁺) and trivalent (Pr³⁺ and Nd³⁺) ion-doped LaCoO₃. In addition, the results on the cohesive energy (Φ), molecular force constant (f), Reststrahlen frequency (υ), Debye temperature (θ}) and Gruneisen parameter (γ) are also discussed. - Graphical abstract: Substitution to trivalent La³⁺ site by K⁺ ions increase the thermal expansion (α) whereas Cd²⁺, Pr³⁺ and Nd³⁺ results in decrease of α in La{sub 1–x}A{sub x}CoO₃₋ (A=K, Cd, Pr, Nd). Highlights: • Probably the first report on the specific heat and thermal expansion in La{sub 1–x}A{sub x}CoO₃. • Thermal properties are computed using the MRIM probably for the first time. • Effect of lattice distortions on bulk modulus and thermal properties is presented. • The negative values of cohesive energy show the stability of these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗