Search NASA⌕ Search

SEARCH · Search NASA

Results for “capture support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

NCERC-CL TREAT Free Field Characterization Foil Reaction Rate Results

This report summarizes the analysis and preliminary MCNP reaction rate modeling of free field characterization measurements performed in the Transient Reaction Test Facility (TREAT) at Idaho National Laboratory (INL) between 12/18/2023 and 2/22/2024. A series of seven irradiations were performed using the Big-BUSTER (Broad Use Specimen Transient Experiment Rig) core configuration. Foil sets including 19.5% LEU-Zr alloy wire, S, Au, Fe, Ni, Co, Ti, and Zr were deployed in each irradiation. Identical foil sets were supplied to Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and INL. All foils were supplied by INL. Additional details on the experiment can be found in [2]. The foil sets were shipped to the National Criticality Experiments Research Center Counting Laboratory (NCERC-CL) branch at LANL (NCERC-CL NISC) and were received on 3/25/2024. Additional details on receipt and counting are reported in [3]. All reactor dosimetry measurements were performed in adherence to the ASTM standards applicable to reactor dosimetry. Measured reaction rates from Au, Co, Fe, Ni, and Ti are reported. Select reaction rate ratios and simulated reaction rates and ratios are discussed. Reaction rates for all measured reaction products were modeled with MCNP 6.3.1 and a TREAT input deck supplied by Edward Lum. Neutron emission estimates calculated using the measured and simulated reaction rates show excellent agreement between the three fast-threshold n-p reactions with the percent differences being < 9% between the three reactions. The capture reactions had poorer, but still reasonable, agreement with < 20% percent differences between the neutron emission estimates of the three capture reactions. The percent difference between the fast-threshold and capture reactions is ∼ 100% for each reaction. This supports the TREAT model is not accurately modeling the neutron spectrum and additional measurements are required to characterize TREAT and match measurements to simulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

High deuteron and neutron yields from the interaction of a petawatt laser with a cryogenic deuterium jet

A compact high-flux, short-pulse neutron source would have applications from nuclear astrophysics to cancer therapy. Laser-driven neutron sources can achieve fluxes much higher than spallation and reactor neutron sources by reducing the volume and time in which the neutron-producing reactions occur by orders of magnitude. We report progress towards an efficient laser-driven neutron source in experiments with a cryogenic deuterium jet on the Texas Petawatt laser. Neutrons were produced both by laser-accelerated multi-MeV deuterons colliding with Be and mixed metallic catchers and by d (d,n) 3 He fusion reactions within the jet. We observed deuteron yields of 10 13 /shot in quasi-Maxwellian distributions carrying ~8-10% of the input laser energy. We obtained neutron yields greater than 10 10 /shot and found indications of a deuteron-deuteron fusion neutron source with high peak flux (>10 22 cm -2 s -1 ). The estimated fusion neutron yield in our experiment is one order of magnitude higher than any previous laser-induced dd fusion reaction. Though many technical challenges will have to be overcome to convert this proof-of-principle experiment into a consistent ultra-high flux neutron source, the neutron fluxes achieved here suggest laser-driven neutron sources can support laboratory study of the rapid neutron-capture process, which is otherwise thought to occur only in astrophysical sites such as core-collapse supernova, and binary neutron star mergers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1983

Gamma rays from the Crab Pulsar 0531+21

Results are reported for observations of PSR 0531 + 21 performed with a gamma ray double Compton scatter telescope launched on a balloon. The operation of the telescope and the handling of the data are described. Phase diagrams for the pulsar and energy distributions for gamma rays from the primary and secondary pulses are shown and discussed. The results indicate that these observations are the first of gamma ray lines from neutrons captured on protons or iron in pulsars. Arguments supporting this interpretation are given.

Long, J. L.↗
NASA NTRS1991

Approach range and velocity determination using laser sensors and retroreflector targets

Rockwell International is conducting an ongoing program to develop Laser Docking Sensors (LDS) that provide high performance and high intrinsic value while meeting all mission objectives. These LDS systems are now being required to aid future spacecraft docking, station keeping, and berthing/capture systems. Improved automated tracking, rendezvous, soft docking, and capture will be required in the construction and support of SSF and future orbiting platforms. The development of a practical LDS requires an easy-to-operate, low-cost, compact system. A wide range of options for laser range detection equipment, ranging from commercial technology to specialized military systems, was evaluated. This evaluation focused on both direct applicability of existing systems and usability of specific technologies contained in these systems. From these efforts it was determined that a new approach provided the greatest promise of fulfilling all mission requirements at the lowest life-cycle cost.

Race, L.↗
NASA NTRS2009

Lunar Water Resource Demonstration (LWRD) Test Results

NASA has undertaken the In-Situ Resource Utilization (lSRU) project called RESOLVE (Regolith and Environment Science & Oxygen and Lunar Volatile Extraction). This project is an Earth-based lunar precursor demonstration of a system that could be sent to explore permanently shadowed polar lunar craters, where it would drill into regolith, quantify the volatiles that are present, and extract oxygen by hydrogen reduction of iron oxides. The RESOLVE chemical processing system was mounted within the CMU rover "Scarab" and successfully demonstrated on Hawaii's Mauna Kea volcano in November 2008. This technology could be used on Mars as well. As described at the 2008 Mars Society Convention, the Lunar Water Resource Demonstration (LWRD) supports the objectives of the RESOLVE project by capturing and quantifying water and hydrogen released by regolith upon heating. Field test results for the quantification of water using LWRD showed that the volcanic ash (tephra) samples contained 0.15-0.41% water, in agreement with GC water measurements. Reduction of the RH in the surge tank to near zero during recirculation show that the water is captured by the water beds as desired. The water can be recovered by heating the Water Beds to 230 C or higher. Test results for the capture and quantification of pure hydrogen have shown that over 90% of the hydrogen can be captured and 98% of the absorbed hydrogen can be recovered upon heating the hydride to 400 C and desorbing the hydrogen several times into the evacuated surge tank. Thus, the essential requirement of capturing hydrogen and recovering it has been demonstrated. ,

Muscatello, Anthony C.↗
NASA NTRSDate not supplied

Validation of Linear Covariance Techniques for Mars Entry, Descent, and Landing Guidance and Navigation Performance Analysis

Current Monte Carlo-based uncertainty analysis methods may require significant computational resources to evaluate the performance of a closed-loop guidance, navigation, and control system. An attractive alternative, particularly during the preliminary and conceptual design phase, is to use linear covariance analysis, which can provide the same statistical information as Monte Carlo methods at a fraction of the computational load. Linear covariance has already been demonstrated in various spaceflight regimes, but only recently has it been applied to atmospheric flight. In this study, a 6-degree-of-freedom formulation of both a linear covariance and Monte Carlo analysis tools are utilized for a Mars entry, descent, and landing scenario which capture both atmospheric and powered flight phases to support precision landing. Comparison of the performance results shows close agreement between the linear covariance and traditional Monte Carlo methods when incorporating an assortment of guidance algorithms and processing a variety of inertial and relative sensor measurements onboard the lander's navigation filter.

James W. Williams↗
DOE OSTI2025

Basin-Scale Structural Features Database: Spatial Datasets to Support Carbon Storage Resource Assessments

Presentation slides on &quot;Basin-Scale Structural Features Database: Spatial Datasets to Support Carbon Storage Resource Assessments&quot; for CCUS 2025 Annual Meeting. The Basin-Scale Structural Features database contains a series of basin-scale spatial datasets representing structural features, including faults, fractures, folds, and earthquakes. Designed to support carbon storage feasibility and resources assessments for Carbon Capture and Storage (CCS) projects, the database leverages publicly available data resources from authoritative sources (e.g. US Geological Survey, State Geologic Surveys), and aims to help users better understand basin-scale structural features, as well as potential data gaps in areas with sparse information.

basin scale↗
NASA NTRS1991

On-orbit demonstrations of automated closure and capture using ESA-developed proximity operations technologies and an existing serviceable NASA Explorer platform spacecraft

Since 1984 the European Space Agency (ESA) has been working to develop an autonomous rendezvous and docking capability to enable Hermes to dock automatically with Columbus. As a result, ESA (with Matra, MBB, and other space companies) have developed technologies that are directly supportive of the current NASA initiative for Automated Rendezvous and Capture. Fairchild and Matra would like to discuss the results of the applicable ESA/Matra rendezvous and capture developments and suggest how these capabilities could be used together with an existing NASA Explorer Platform satellite to minimize new development and accomplish a cost-effective automatic closure and capture demonstration program.

Hohweisner, Bill↗
DOE OSTI2024

System and method for geometrically constrained axisymmetric adjustable kinematic mount

The present disclosure relates to an adjustable mount apparatus. The apparatus may have a material support having a plurality of support legs, with each one of the support legs having a distal portion. A base assembly is used which has a plurality of laterally extending leg portions. A plurality of adjustably positionable capture subassemblies are slidably disposed within the laterally extending leg portions for releasably coupling to the distal portions of the support legs to hold the material support in a stable manner on the base assembly. A plurality of moveable elements, each being independently associated with one of the capture subassemblies, enable highly controlled linear movement of the capture subassemblies. Each capture subassembly engages with the distal portion of one of the support legs to exert a clamping force thereon, to affix the material support securely to the base assembly.

Guzorek, Steven J.↗
NASA NTRS1991

On-orbit demonstration of automated closure and capture using ESA-developed proximity operations technologies and an existing, serviceable NASA Explorer Platform spacecraft

The European Space Agency (ESA) has been working to develop an autonomous rendezvous and docking capability since 1984 to enable Hermes to automatically dock with Columbus. As a result, ESA with Matra, MBB, and other space companies have developed technologies that are also directly supportive of the current NASA initiative for Automated Rendezvous and Capture. Fairchild and Matra would like to discuss the results of the applicable ESA/Matra rendezvous and capture developments, and suggest how these capabilities could be used, together with an existing NASA Explorer Platform satellite, to minimize new development and accomplish a cost effective automatic closure and capture demonstration program. Several RV sensors have been developed at breadboard level for the Hermes/Columbus program by Matra, MBB, and SAAB. Detailed algorithms for automatic rendezvous, closure, and capture have been developed by ESA and CNES for application with Hermes to Columbus rendezvous and docking, and they currently are being verified with closed-loop software simulation. The algorithms have multiple closed-loop control modes and phases starting at long range using GPS navigation. Differential navigation is used for coast/continuous thrust homing, holdpoint acquisition, V-bar hopping, and station point acquisition. The proximity operation sensor is used for final closure and capture. A subset of these algorithms, comprising the proximity operations algorithms, could easily be extracted and tailored to a limited objective closure and capture flight demonstration.

Hohwiesner, Bill↗
DOE OSTI2025

Model-based iterative reconstruction with adaptive regularization for artifact reduction in electron tomography

Obtaining high-quality 3D reconstructions from electron tomography of crystalline particles embedded in lighter support elements is crucial for various material systems such as catalysts for fuel cell applications. However, significant challenges arise due to the limited tilt range, sparse and low signal-to-noise ratio of the measurements. In addition, small metal particles can cause strong streaking and shading artifacts in the 3D reconstructions when using conventional reconstruction algorithms due to the presence of Bragg diffraction and the large scattering cross-section difference between the materials of the particles and the background support regions. These artifacts lead to errors in the downstream characterization affecting extraction of critical features such as the size of the metal particles, their distribution and the volume of the lighter support regions. In this paper, we present a two-stage algorithm based on metal artifact reduction, utilizing model-based iterative reconstruction methods with adaptive adjustment of regularization parameters. Our approach yields high-quality 3D reconstructions compared to traditional algorithms, accurately capturing both the metal particles as well as the background support. We demonstrate the effectiveness of our algorithm through simulated and experimental bright-field electron tomography data, showing significant improvements in reconstruction quality compared to traditional methods.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2024

Exploring the Moon: Preserving the Legacy Through Spacesuit Knowledge Capture and Strategic Communication

NASA is returning to the Moon to stay. To establish a sustained lunar presence, astronauts will pack spacesuits, surface-mobility tools, rovers, and decades’ worth of knowledge. The U.S. Spacesuit Knowledge Capture (SKC) and Strategic Communications (Strat Comm) team is specialized in capturing, preserving, and sharing space-related knowledge with NASA scientists, technicians, engineers, vendors, and the public to support space exploration. Since the SKC Program’s 2007 inception, its focus has been to capture and share valuable spacesuit-related knowledge with the NASA community. As the program evolved, its notoriety, funding, scope, and staffing expanded from a one-person, part-time, unfunded operation to a small-team, funded entity. Currently, this team has been formulated with a diverse skillset to meet the requirements of its stakeholders. The SKC and Strat Comm team has used its skills to produce over 260 recorded knowledge captures of subject-matter experts (SMEs) and photoshoots. These knowledge captures are in the form of photographs, lectures, workshops, vignettes, videos, and interviews containing essential space-related knowledge. To help educate the space community and public, this trove of information (e.g., videos of world-class facilities, photographs, and SME lectures), produced inside NASA Johnson Space Center, can be obtained through various sources. During Fiscal Year 2024, the SKC and Strat Comm team will focus on several initiatives. Examples of initiatives include the following: 1) share lessons learned during NASA’s internal venues such as Safety & Health Day and Day of Remembrance; 2) share knowledge with the public, educators, and students through a media production titled Exploring the Moon; and 3) highlight NASA’s unique capabilities and expertise in a video series titled What’s Behind This Door? This paper discusses the team's approach, unique capture capability, initiatives, and much more.

Cinda Chullen↗
NASA NTRSDate not supplied

Exploring the Moon: Preserving the Legacy Through Spacesuit Knowledge Capture and Strategic Communication

NASA is returning to the Moon to stay. To establish a sustained lunar presence, astronauts will pack spacesuits, surface-mobility tools, rovers, and decades’ worth of knowledge. The U.S. Spacesuit Knowledge Capture (SKC) and Strategic Communications (Strat Comm) team is specialized in capturing, preserving, and sharing space-related knowledge with NASA scientists, technicians, engineers, vendors, and the public to support space exploration. Since the SKC Program’s 2007 inception, its focus has been to capture and share valuable spacesuit-related knowledge with the NASA community. As the program evolved, its notoriety, funding, scope, and staffing expanded from a one-person, part-time, unfunded operation to a small-team, funded entity. Currently, this team has been formulated with a diverse skillset to meet the requirements of its stakeholders. The SKC and Strat Comm team has used its skills to produce over 260 recorded knowledge captures of subject-matter experts (SMEs) and photoshoots. These knowledge captures are in the form of photographs, lectures, workshops, vignettes, videos, and interviews containing essential space-related knowledge. To help educate the space community and public, this trove of information (e.g., videos of world-class facilities, photographs, and SME lectures), produced inside NASA Johnson Space Center, can be obtained through various sources. During Fiscal Year 2024, the SKC and Strat Comm team will focus on several initiatives. Examples of initiatives include the following: 1) share lessons learned during NASA’s internal venues such as Safety & Health Day and Day of Remembrance; 2) share knowledge with the public, educators, and students through a media production titled Exploring the Moon; and 3) highlight NASA’s unique capabilities and expertise in a video series titled What’s Behind This Door? This paper discusses the team's approach, unique capture capability, initiatives, and much more.

Cinda Chullen↗
NASA NTRS2009

Performance Support Tools for Space Medical Operations

The early Constellation space missions are expected to have medical capabilities very similar to those currently on the Space Shuttle and International Space Station (ISS). For Crew Exploration Vehicle (CEV) missions to ISS, medical equipment will be located on ISS, and carried into CEV in the event of an emergency. Flight Surgeons (FS) on the ground in Mission Control will be expected to direct the Crew Medical Officer (CMO) during medical situations. If there is a loss of signal and the crew is unable to communicate with the ground, a CMO would be expected to carry out medical procedures without the aid of a FS. In these situations, performance support tools can be used to reduce errors and time to perform emergency medical tasks. Human factors personnel at Johnson Space Center have recently investigated medical performance support tools for CMOs on-orbit, and FSs on the ground. This area of research involved the feasibility of Just-in-time (JIT) training techniques and concepts for real-time medical procedures. In Phase 1, preliminary feasibility data was gathered for two types of prototype display technologies: a hand-held PDA, and a Head Mounted Display (HMD). The PDA and HMD were compared while performing a simulated medical procedure using ISS flight-like medical equipment. Based on the outcome of Phase 1, including data on user preferences, further testing was completed using the PDA only. Phase 2 explored a wrist-mounted PDA, and compared it to a paper cue card. For each phase, time to complete procedures, errors, and user satisfaction were captured. Information needed by the FS during ISS mission support, especially for an emergency situation (e.g. fire onboard ISS), may be located in many different places around the FS s console. A performance support tool prototype is being developed to address this issue by bringing all of the relevant information together in one place. The tool is designed to include procedures and other information needed by a FS during an emergency, as well as procedures and information to be used after the emergency is resolved. Several walkthroughs of the prototype with FSs have been completed within a mockup of an ISS FS console. Feedback on the current tool design as well as recommendations for existing ISS FS displays were captured.

Byrne, Vicky E.↗
DOE OSTI2026

Optimizing Alabama’s CO 2 Storage in Shelby County (OASIS) (Final Report)

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS) is a CarbonSAFE Phase II designed to support the U.S. Department of Energy’s goals of reducing project risks and costs for future carbon dioxide (CO 2 ) capture, utilization, and storage (CCUS) projects, bringing more storage resources into commercial classifications that support business and financial decisions, and encouraging more rapid growth of a vibrant, geographically widespread industry for geologic carbon storage.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

INTERSECT Architecture Specification: System-of-systems Architecture (Version 0.5)

Oak Ridge National Laboratory (ORNL)’s Self-driven Experiments for Science / Interconnected ScienceEcosystem (INTERSECT) architecture project, titled “An Open Federated Architecture for the Laboratory of the Future”, creates an open federated hardware/software architecture for the laboratory of the future using a novel system of systems (SoS) and microservice architecture approach, connecting scientific instruments, robot-controlled laboratories and edge/center computing/data resources to enable autonomous experiments, “self-driving” laboratories, smart manufacturing, and artificial intelligence (AI)-driven design, discovery and evaluation. The architecture project is divided into three focus areas: design patterns; SoS architecture; and microservices architecture. The design patterns area focuses on describing science use cases as design patterns that identify and abstract the involved hardware/software components and their interactions interms of control, work and data flow. The SoS architecture area focuses on an open architecture specification for the federated ecosystem that clarifies terms, architectural elements, the interactions between them and compliance. The microservices architecture describes blueprints for loosely coupled microservices, standardized interfaces, and multi-programming language support. This document is the SoS Architecture specification only, and captures the system of systems architecture design for the INTERSECT Initiative and its components. It is intended to provide a deep analysis and specification of how the INTERSECT platform will be designed, and to link the scientific needs identified across disciplines with the technical needs involved in the support, development, and evolution of a science ecosystem. PLEASE NOTE: This is a working document and reflects current discussions and design activity among the authors. There may be inconsistencies within the document as different parts evolve at a different pace. We invite comments and thoughts from the public on this and following working drafts. The first finished version of this document is scheduled for release in September 2023.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Capturing and Analyzing Requirements with FRET

FRET is an open source tool, developed at NASA Ames, for writing, understanding, formalizing, and analyzing requirements. In practice, requirements are typically written in natural language, which is ambiguous and consequently not amenable to formal analysis. Since formal, mathematical notations are unintuitive, requirements in FRET are entered in a restricted, natural language, called FRETish with precise unambiguous meaning. FRET helps users write FRETish requirements both by providing grammar information and examples during editing, but also through English and diagrammatic explanations to clarify subtle semantic issues. For each requirement, FRET automatically produces formalizations and supports interactive simulation of produced formalizations to ensure that they capture user intentions. Through its analysis portal, FRET connects to analysis tools by exporting verification code. Currently FRET connects to (1) the CoCoSim automated analysis tool for the verification of Simulink and Stateflow models, and (2) the Copilot runtime monitoring tool for the analysis of C programs. FRET also supports the consistency/realizability analysis of requirements for identifying conflicting requirements. In this tutorial, we introduce FRET and learn to speak and analyze FRETish through several examples.

FRET↗