Search NASA⌕ Search

SEARCH · Search NASA

Results for “chromium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Coherent control and high-fidelity readout of chromium ions in commercial silicon carbide

Abstract Transition metal ions provide a rich set of optically active defect spins in wide bandgap semiconductors. Chromium (Cr 4+ ) in silicon-carbide (SiC) produces a spin-1 ground state with a narrow, spectrally isolated, spin-selective, near-telecom optical interface. However, previous studies were hindered by material quality resulting in limited coherent control. In this work, we implant Cr into commercial 4H-SiC and show optimal defect activation after annealing above 1600 °C. We measure an ensemble optical hole linewidth of 31 MHz, an order of magnitude improvement compared to as-grown samples. An in-depth exploration of optical and spin dynamics reveals efficient spin polarization, coherent control, and readout with high fidelity (79%). We report T 1 times greater than 1 s at cryogenic temperatures (15 K) with a T 2 * = 317 ns and a T 2 = 81 μs, where spin dephasing times are currently limited by spin–spin interactions within the defect ensemble. Our results demonstrate the potential of Cr 4+ in SiC as an extrinsic, optically active spin qubit.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Determining hexavalent chromium transport properties in alkaline nuclear waste using nuclear magnetic resonance spectroscopy

This study focuses on the transport properties of hexavalent chromium, specifically the chromate anion, to improve predictive models and environmental remediation strategies for Cr(VI) migration. Using 53 Cr Nuclear Magnetic Resonance (NMR) spectroscopy, the research quantifies chromate in multicomponent electrolytes replicating nuclear waste conditions at the Hanford Site in Washington State. The consistency of the 53 Cr NMR signal integral with chromate concentration, despite varying matrix compositions, establishes it as a reliable concentration indicator. The transport properties of chromate in an alkaline solution were assessed using relaxation-based measurements via saturation recovery and Carr-Purcell-Meiboom-Gill experiments, determining spin-lattice and spin-spin relaxation times. These measurements, combined with the Bloembergen-Purcell-Pound equation, helped estimate the rotational correlation time and the 53 Cr self-diffusion coefficient using Stokes-Einstein-Debye and Stokes-Einstein equations. Direct measurements were obtained through pulsed field gradient stimulated echo 53 Cr NMR spectroscopy. Monte Carlo simulations further estimated uncertainty propagation. The results enhance comprehension of chromate transport and highlight prospects for identifying transport properties of NMR-active nuclei, traditionally considered unreachable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Identification of key oxidative intermediates and the function of chromium dopants in PKU-8: catalytic dehydrogenation of sec-alcohols with tert-butylhydroperoxide

Catalytic oxidation using green oxidants has played an important role in modern chemical engineering, however the in-situ generated active groups and the related catalytic mechanism need to be further understood. Combined with several measurements, such as isotopic tracers, molecular probes and cycle voltammetry, chromium ions were observed to undergo a Cr 3+ –Cr 2+ –Cr 3+ redox cycle. Simultaneously, t-BuOO* groups are generated in a large quantity and seem to function as the most critical active species to enhance the dehydrogenation of sec-alcohols when using TBHP as oxidant. DFT calculations give an energetically favorable pathway for TBHP activation, agreeing well with the obtained catalytic results. Here, a reaction scheme was finally proposed to interpret the probable mechanistic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetocaloric effect observations near room temperature in few-layered chromium telluride (Cr 2 Te 3 )

Transition metal telluride compositions are explored extensively for their unique magnetic behavior. Few-layered chromium telluride (Cr 2 T e3 ) exhibits a near-room-temperature phase transition, where the material can be effectively used in applications such as magnetic refrigeration. Compared to existing magnetocaloric materials, Heusler alloys, and rare-earth-based alloys, the large-scale synthesis of mechanically exfoliated Cr 2 Te 3 involves less complexity, resulting in a stable composition. Compared to existing tellurides, Cr 2 Te 3 exhibited a large change in magnetic entropy (|ΔS M |) of 1.88 J k g−1 K −1 at a magnetic field of 4 T. A refrigeration capacity (RC) of ∼82 J kg −1 was determined from the change in magnetic entropy versus temperature curve. The results were comparable with those for existing Cr-based compounds. First-principles density functional theory (DFT) confirmed the magnetic properties of Cr 2 Te 3 , including a near-room-temperature Curie temperature, T C , consistent with experimental results. Here, structural transition was also observed using first-principles DFT, which is responsible for the magnetic behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nanomechanical and tribological properties of nickel–chromium multilayer coating on Inconel 617

Multilayer coatings of Ni and Cr were deposited onto Inconel 617, and multi-scale physical properties were characterized using high temperature tribological experiments, nanoindentation, and microscratch. The effect of high temperature aging (950 °C under helium environment) on two different Ni/Cr multilayer coatings with individual layer thicknesses of 50 and 200 nm denoted by Ni/Cr(50) and Ni/Cr(200) was investigated. Nanoindentation of original coatings showed a hardness of 6 GPa that increases to 14 GPa for both samples once aged. Microscratch results support the macro-tribology results where Ni/Cr(50) (without aging) was the only delaminated coating with significant wear. Additionally, aging in both cases reduced the in situ coefficient of friction and wear. Cross-section energy dispersive spectrometry confirmed that the aged oxide layer was two to three times thicker than the original coating. In conclusion, an abundance of chromium oxide was found in the main body of the coatings, which led to higher hardness and better wear resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Symmetry breaking and self-interaction correction in the chromium atom and dimer

Density functional approximations to the exchange–correlation energy can often identify strongly correlated systems and estimate their energetics through energy-minimizing symmetry-breaking. In particular, the binding energy curve of the strongly correlated chromium dimer is described qualitatively by the local spin density approximation (LSDA) and almost quantitatively by the Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA), where the symmetry breaking is antiferromagnetic for both. Here, we show that a full Perdew–Zunger self-interaction-correction (SIC) to LSDA seems to go too far by creating an unphysical symmetry-broken state, with effectively zero magnetic moment but non-zero spin density on each atom, which lies ~4 eV below the antiferromagnetic solution. A similar symmetry-breaking, observed in the atom, better corresponds to the 3d↑↑4s↑3d↓↓4s↓ configuration than to the standard 3d↑↑↑↑↑4s↑. For this new solution, the total energy of the dimer at its observed bond length is higher than that of the separated atoms. In conclusion, these results can be regarded as qualitative evidence that the SIC needs to be scaled down in many-electron regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evaluating nonlocal heat transport in directly driven chromium spheres using x-ray spectroscopy

We report on experiments investigating heat transport in laser-generated plasmas using directly driven chromium spheres. The spheres are fielded at the OMEGA laser facility and are driven with laser intensities of 5×10 14 Wcm −2 . Plasma conditions in the corona and scattered light are measured experimentally and compared against predictions from two-dimensional (2D) radiation-hydrodynamic simulations using different heat transport models. Spectroscopic analysis of x-ray self-emission is used as an additional diagnostic. X-ray emission is integrated over a large region of the plasma, probing regions that are not observed by localized optical Thomson scattering. In particular, x-ray emission peaks near the plasma critical density, so emission from optically thin lines provides information on plasma conditions where nonlocal transport is most likely to be significant. Three common heat transport models are considered: local transport with flux limiters f = 0.15 and f = 0.03, and the nonlocal Schurtz–Nicolai–Busquet (SNB) model. Consistent with previous work, both the high-flux (f = 0.15) and SNB models show good agreement with experimentally measured plasma conditions in the corona despite overpredicting laser absorption, whereas the low-flux (f = 0.03) model fails to match any experimental data. Conditions inferred from x-ray self-emission line ratios support this conclusion during the period of laser peak power, although synthetic spectra for all models fail to match the experiment during the transient portions of the pulse. For these reasons, the low-flux model is again rejected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Kinetics of solid–liquid interface motion in molecular dynamics and phase-field models: crystallization of chromium and silicon

The results of molecular dynamics (MD) simulations of the crystallization process in one-component materials and solid solution alloys reveal a complex temperature dependence of the velocity of the crystal–liquid interface featuring an increase up to a maximum at 10–30% undercooling below the equilibrium melting temperature followed by a gradual decrease of the velocity at deeper levels of undercooling. At the qualitative level, such non-monotonous behaviour of the crystallization front velocity is consistent with the diffusion-controlled crystallization process described by the Wilson–Frenkel model, where the almost linear increase of the interface velocity in the vicinity of melting temperature is defined by the growth of the thermodynamic driving force for the phase transformation, while the decrease in atomic mobility with further increase of the undercooling drives the velocity through the maximum and into a gradual decrease at lower temperatures. At the quantitative level, however, the diffusional model fails to describe the results of MD simulations in the whole range of temperatures with a single set of parameters for some of the model materials. The limited ability of the existing theoretical models to adequately describe the MD results is illustrated in the present work for two materials, chromium and silicon. It is also demonstrated that the MD results can be well described by the solution following from the hodograph equation, previously found from the kinetic phase-field model (kinetic PFM) in the sharp interface limit. The ability of the hodograph equation to describe the predictions of MD simulation in the whole range of temperatures is related to the introduction of slow (phase field) and fast (gradient flow) variables into the original kinetic PFM from which the hodograph equation is obtained. The slow phase-field variable is responsible for the description of data at small undercoolings and the fast gradient flow variable accounts for local non-equilibrium effects at high undercoolings. The introduction of these two types of variables makes the solution of the hodograph equation sufficiently flexible for a reliable description of all nonlinearities of the kinetic curves predicted in MD simulations of Cr and Si. This article is part of the theme issue ‘Transport phenomena in complex systems (part 1)’.

Science & Technology - Other Topics↗
DOE OSTI2022

First-principles study of L -shell iron and chromium opacity at stellar interior temperatures

Recently developed free-energy density functional theory (DFT)-based methodology for optical property calculations of warm dense matter has been applied for studying L-shell opacity of iron and chromium at T = 182 eV. We use Mermin–Kohn–Sham density functional theory with a ground-state and a fully temperature-dependent generalized gradient approximation exchange-correlation (XC) functionals. It is demonstrated that the role of XC at such a high-T is negligible due to the total free-energy of interacting system being dominated by the noninteracting free-energy term in agreement with estimations for the homogeneous electron gas. Furthermore, our DFT predictions are compared to the radiative emissivity and opacity of dense plasmas model, to the real-space Greens function method, and to experimental measurements. Good agreement is found between all three theoretical methods, and in the bound–continuum region for Cr when compared to the experiment, while the discrepancy between direct DFT calculations and the experiment for Fe remains essentially the same as for plasma-physics models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Complete genome sequence of Cellulomonas sp., strain ES6, a chromate-reducing bacterium isolated from chromium-contaminated subsurface sediment

ABSTRACT Cellulomonas sp. strain ES6 is a chromate-reducing bacterium isolated from chromium contaminated subsurface sediment. Illumina MiSeq and Oxford Nanopore sequencing were used to assemble the genome sequence which consisted of a single circular chromosome of 4.13 Mb, contained 3,960 protein encoding genes and with an overall G + C content 75.38%.

Perea, Katheryn R.↗
DOE OSTI2022

Bismuth Electrocatalyst Enabling Reversible Redox Kinetics of a Chelated Chromium Flow Battery Anolyte

Metal electrocatalysts have been reported to improve the electron transfer kinetics of aqueous redox flow battery electrolytes on various types of carbon electrodes. In this work, we electrodeposited bismuth metal onto a carbon paper anode of a redox flow battery containing our previously reported polyaminocarboxylate-chelated chromium electrolyte. Depositing 0.58 mg cm –2 of bismuth metal enabled an electrochemically reversible electron transfer for the Cr(II)/Cr(III) couple, resulting in a 3.9% voltage efficiency increase over ten cycles at 100 mA cm –2 across an 80% state of charge window, while maintaining >99% current efficiency. The bismuth electrocatalyst provided other improvements, such as a 13% increase in average discharge power density when cycling at 80% energy efficiency, along with a 60% decrease in charge transfer resistance and 12% decrease in the full cell area specific resistance. A chelated bismuth complex was also utilized as a bismuth source for electrodeposition, providing an example of how polyaminocarboxylate ligands can be further implemented into efforts towards improving the energy efficiency of aqueous redox flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Transport of Ligand Coordinated Iron and Chromium through Cation-Exchange Membranes

Fluxes of negatively charged ligand-coordinated iron, Fe(CN) 6 3/4- , and chromium, CrPDTA 1/2− , through two promising commercial cation-exchange membranes, Aquivion E87–05S and Fumasep E-620(K), were measured as functions of current density. The magnitude of the partial current density reached a maximum of − 43 μ A cm −2 at the maximum applied current density magnitude of − 43 mA cm −2 for Fe(CN) 6 3/4− transport through Aquivion, or 0.1% of the total current density. Fumasep E-620(K) blocks practically all crossover of both compounds. Both membranes sorb more Fe(CN) 6 3/4− and CrPDTA 1/2− than predicted by Donnan equilibrium, and low crossover rates can be attributed mainly to slow diffusion, not charge-based rejection of co-ions. The magnitude of the diffusion coefficient appears to correlate with hydraulic permeability. Although Aquivion E87–05S and Fumasep E-620(K) have significant and observable differences in membrane crossover rates, cells built with the DI-soaked membranes offer similarly high coulombic efficiency, indicating the relatively small contribution that crossover makes to inefficiency over a single cycle.

25 ENERGY STORAGE↗
DOE OSTI2022

The Electrochemical Behavior of As-Prepared Aluminum Alloy A360 Produced by Selective Laser Melting Fabrication with and without a Trivalent Chromium Process Conversion Coating

In this paper, we report on the electrochemical behavior and corrosion resistance of as-prepared aluminum alloy, A360 (AlSi10Mg), fabricated by additive manufacturing, with and without a trivalent chromium process conversion coating. Selective laser melting was the 3D printing process used for the alloy build. The corrosion suppression provided by the coating system was assessed through electrochemical measurements and accelerated degradation testing during a 14-day continuous neutral salt-spray exposure. The results indicate that the conversion coating can be formed by solution pretreating (degreasing and deoxidation) the alloy (X-Z plane perpendicular to the build plane) with its native surface roughness (as-prepared) followed by immersion for 10, 15 or 20 min in the coating bath. All three immersion times provide an equivalent level of corrosion protection to the alloy. The conversion coating suppresses both anodic and cathodic currents, increases the polarization resistance, and provides both anodic and cathodic corrosion protection to the as-prepared alloy. The conversion-coated specimens exhibit good stand-alone corrosion resistance during a 14-day neutral salt-spray exposure with corrosion intensity values (g/m 2 -year) ~10x lower than values for the uncoated, as-prepared alloy specimens.

36 MATERIALS SCIENCE↗