Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud parameterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Performance of Goddard Earth Observing System GCM Column Radiation Models under Heterogeneous Cloud Conditions

We test the performance of the shortwave (SW) and longwave (LW) Column Radiation Models (CORAMs) of Chou and collaborators with heterogeneous cloud fields from a global single-day dataset produced by NCAR's Community Atmospheric Model with a 2-D CRM installed in each gridbox. The original SW version of the CORAM performs quite well compared to reference Independent Column Approximation (ICA) calculations for boundary fluxes, largely due to the success of a combined overlap and cloud scaling parameterization scheme. The absolute magnitude of errors relative to ICA are even smaller for the LW CORAM which applies similar overlap. The vertical distribution of heating and cooling within the atmosphere is also simulated quite well with daily-averaged zonal errors always below 0.3 K/d for SW heating rates and 0.6 K/d for LW cooling rates. The SW CORAM's performance improves by introducing a scheme that accounts for cloud inhomogeneity. These results suggest that previous studies demonstrating the inaccuracy of plane-parallel models may have unfairly focused on worst scenario cases, and that current radiative transfer algorithms of General Circulation Models (GCMs) may be more capable than previously thought in estimating realistic spatial and temporal averages of radiative fluxes, as long as they are provided with correct mean cloud profiles. However, even if the errors of the particular CORAMs are small, they seem to be systematic, and the impact of the biases can be fully assessed only with GCM climate simulations.

Oreopoulos, L.↗
NASA NTRS2005

Effective Radius of Ice Cloud Particle Populations Derived from Aircraft Probes

The effective radius(r(sub e)) is a crucial variable in representing the radiative properties of cloud layers in general circulation models. This parameter is proportional to the condensed water content (CWC) divided by the extinction (sigma). For ice cloud layers, parameterizations for r(sub e), have been developed from aircraft in-situ measurements 1) indirectly, using data obtained from particle spectrometer probes and assumptions or observations about particle shape and mass to get the ice water content (IWC) and area to get sigma, and recently 2) from probes that measure IWC and sigma directly. This study compares [IWC/sigma] derived from the two methods using data sets acquired from comparable instruments on two aircraft, one sampling clouds at mid-levels and the other at upper-levels during the CRYSTAL-FACE field program in Florida in 2002. The sigma and IWC derived by each method are compared and evaluated in different ways for each aircraft data set. Direct measurements of sigma exceed those derived indirectly by a factor of two to two and a half. The IWC probes, relying on ice sublimation, appear to measure accurately except when the IWC is high or the particles too large to sublimate completely during the short transit time through the probe. The IWC estimated from the particle probes are accurate when direct measurements are available to provide constraints and useful information in high IWC/large particle situations. Because of the discrepancy in sigma estimates between the direct and indirect approaches, there is a factor of 2 to 3 difference in [IWC/sigma] between them. Although there are significant uncertainties involved in its use, comparisons with several independent data sources suggest that the indirect method is the more accurate of the two approaches. However, experiments are needed to resolve the source of the discrepancy in sigma.

Heymsfield, Andrew J.↗
DOE OSTI2021

Land–Atmosphere Coupling at the U.S. Southern Great Plains: A Comparison on Local Convective Regimes between ARM Observations, Reanalysis, and Climate Model Simulations

Using the 9-yr warm-season observations at the Atmospheric Radiation Measurement Southern Great Plains site, in this work we assess the land–atmosphere (LA) coupling in the North American Regional Reanalysis (NARR) and two climate models: hindcasts with the Community Atmosphere Model version 5.1 by Cloud-Associated Parameterizations Testbed (CAM5-CAPT) and nudged runs with the Energy Exascale Earth System Model Atmosphere Model version 1 Regionally Refined Model (EAMv1-RRM). We focus on three local convective regimes and diagnose model behaviors using the local coupling metrics. NARR agrees well with observations except a slightly warmer and drier surface with higher downwelling shortwave radiation and lower evaporative fraction. On clear-sky days, it shows warmer and drier early-morning conditions in both models with significant underestimates in surface evaporation by EAMv1-RRM. On the majority of the ARM-observed shallow cumulus days, there is no or little low-level clouds in either model. When captured in models, the simulated shallow cumulus shows much less cloud fraction and lower cloud bases than observed. On the days with late-afternoon deep convection, models tend to present a stable early-morning lower atmosphere more frequently than the observations, suggesting that the deep convection is triggered more often by elevated instabilities. Generally, CAM5-CAPT can reproduce the local LA coupling processes to some extent due to the constrained early-morning conditions and large-scale winds. EAMv1-RRM exhibits large precipitation deficits and warm and dry biases toward mid-to-late summers, which may be an amplification through a positive LA feedback among initial atmosphere and land states, convection triggering and large-scale circulations.

58 GEOSCIENCES↗
NASA NTRS2021

Land-Atmosphere Coupling at the U.S. Southern Great Plains: A Comparison on Local Convective Regimes Between ARM Observations, Reanalysis, and Climate Model Simulations

Using the 9-yr warm-season observations at the Atmospheric Radiation Measurement Southern Great Plains site, we assess the land-atmosphere (L-A) coupling in North American Regional Reanalysis (NARR) and two climate models: hindcasts with the Community Atmosphere Model version 5.1 by Cloud-Associated Parameterizations Testbed (CAM5-CAPT) and nudged runs with the Energy Exascale Earth System Model Atmosphere Model version 1 Regionally Refined Model (EAMv1-RRM). We focus on three local convective regimes and diagnose model behaviors using the Local Coupling metrics (Santanello et al. 2018). NARR agrees well with observations except a slightly warmer and drier surface with higher downwelling shortwave radiation and lower evaporative fraction. On clear-sky days, it shows warmer and drier early-morning conditions in both models with significant underestimates in surface evaporation by EAMv1-RRM. On the majority of the ARM-observed shallow cumulus days, there is no or little low-level clouds in either model. When captured in models, the simulated shallow cumulus shows much less cloud fraction and lower cloud bases than observed. On the days with late-afternoon deep convection, models tend to present a stable early-morning lower atmosphere more frequently than the observations, suggesting that the deep convection is triggered more often by elevated instabilities. Generally, CAM5-CAPT can reproduce the local L-A coupling processes to some extent due to the constrained early-morning conditions and large-scale winds. EAMv1-RRM exhibits large precipitation deficits and warm and dry biases towards mid-to-late summers, which may be an amplification through a positive L-A feedback among initial atmosphere and land states, convection triggering and large-scale circulations.

land-atmosphere↗
NASA NTRS1990

Dependence of marine stratocumulus reflectivities on liquid water paths

Simple parameterizations that relate cloud liquid water content to cloud reflectivity are often used in general circulation climate models to calculate the effect of clouds in the earth's energy budget. Such parameterizations have been developed by Stephens (1978) and by Slingo and Schrecker (1982) and others. Here researchers seek to verify the parametric relationship through the use of simultaneous observations of cloud liquid water content and cloud reflectivity. The column amount of cloud liquid was measured using a microwave radiometer on San Nicolas Island following techniques described by Hogg et al., (1983). Cloud reflectivity was obtained through spatial coherence analysis of Advanced Very High Resolution Radiometer (AVHRR) imagery data (Coakley and Beckner, 1988). They present the dependence of the observed reflectivity on the observed liquid water path. They also compare this empirical relationship with that proposed by Stephens (1978). Researchers found that by taking clouds to be isotropic reflectors, the observed reflectivities and observed column amounts of cloud liquid water are related in a manner that is consistent with simple parameterizations often used in general circulation climate models to determine the effect of clouds on the earth's radiation budget. Attempts to use the results of radiative transfer calculations to correct for the anisotropy of the AVHRR derived reflectivities resulted in a greater scatter of the points about the relationship expected between liquid water path and reflectivity. The anisotropy of the observed reflectivities proved to be small, much smaller than indicated by theory. To critically assess parameterizations, more simultaneous observations of cloud liquid water and cloud reflectivities and better calibration of the AVHRR sensors are needed.

Coakley, James A., Jr.↗
NASA NTRS2000

Radiative Properties of Cirrus Clouds in the Infrared (8-13 microns) Spectral Region

Atmospheric radiation in the infrared (IR) 8-13 microns spectral region contains a wealth of information that is very useful for the retrieval of ice cloud properties from aircraft or space-borne measurements. To provide the scattering and absorption properties of nonspherical ice crystals that are fundamental to the IR retrieval implementation, we use the finite-difference time domain (FDTD) method to solve for the extinction efficiency, single-scattering albedo, and the asymmetry parameter of the phase function for ice crystals smaller than 40 microns. For particles larger than this size, the improved geometric optics method (IGOM) can be employed to calculate the asymmetry parameter with an acceptable accuracy, provided that we properly account for the inhomogeneity of the refracted wave due to strong absorption inside the ice particle. A combination of the results computed from the two methods provides the asymmetry parameter for the entire practical range of particle sizes between 1 micron and 10000 microns over wavelengths ranging from 8 microns to 13 microns. For the extinction and absorption efficiency calculations, several methods including the IGOM, Mie solution for equivalent spheres (MSFES), and the anomalous diffraction theory (ADT) can lead to a substantial discontinuity in comparison with the FDTD solutions for particle sizes on the order of 40 microns. To overcome this difficulty, we have developed a novel approach called the stretched scattering potential method (SSPM). For the IR 8-13 microns spectral region, we show that SSPM is a more accurate approximation than ADT, MSFES, and IGOM. The SSPM solution can be further refined numerically. Through a combination of the FDTD and SSPM, we have computed the extinction and absorption efficiency for hexagonal ice crystals with sizes ranging from 1 to 10000 microns at 12 wavelengths between 8 and 13 microns Calculations of the cirrus bulk scattering and absorption properties are performed for 30 size distributions obtained from various field campaigns for midlatitude and tropical cirrus cloud systems. Parameterization of these bulk scattering properties is carried out by using second-order polynomial functions for the extinction efficiency and the single-scattering albedo and the power law expression for the asymmetry parameter. We note that the volume-normalized extinction coefficient can be separated into two parts: one is inversely proportional to effective size and is independent of wavelength, and the other is the wavelength-dependent effective extinction efficiency. Unlike conventional parameterization efforts, the present parameterization scheme is more accurate because only the latter part of the volume-normalized extinction coefficient is approximated in terms of an analytical expression. After averaging over size distribution, the single-scattering albedo is shown to decrease with an increase in effective size for wavelengths shorter than 10.0 microns whereas the opposite behavior is observed for longer wavelengths. The variation of the asymmetry parameter as a function of effective size is substantial when the effective size is smaller than 50 microns. For effective sizes larger than 100 microns, the asymmetry parameter approaches its asymptotic value. The results derived in this study can be useful to remote sensing applications involving IR window bands under cirrus cloud conditions.

Yang, Ping↗
NASA NTRS1994

Dynamic modeling of orographically induced precipitation

Local orography governs the triggering of cloud formation and the enhancement of processes such as condensation and hydrometeor nucleation and growth in mountainous regions. Intense, lengthy precipitation events are typical upwind of the topographic divide, with sharply decreasing magnitude and duration on the lee side. Differences in mean annual precipitation of several hundred percent between windward slopes of orographic barriers and adjacent valleys or lee side slopes are not unusual. Because much of the streamflow in areas such as the western United States is derived from mountainous areas that are remote and often poorly instrumented, modeling of orographic precipitation has important implications for water resources management. Models of orographically induced precipitation differ by their treatment of atmospheric dynamics and by the extent to which they rely on bulk parameterization of cloud and precipitation physics. Adiabatic ascent and a direct proportionality between efficiency and orographically magnified updrafts are the most frequent assumptions in orographic precipitation modeling. Space-time discretization (i.e., resolution) is a major issue because of the high spatial variability of orographic precipitation. For a specific storm, relative errors as large as 50 to 100% are common in the forecast/hindcast of precipitation intensity and can be even larger in the case of catastrophic storms. When monthly or seasonal timescales are used to evaluate model performance, the magnitude of such errors decreases dramatically, reaching values as low as 10 to 15%. Current research is focusing on the development of data assimilation techniques to incorporate radar and satellite observations, and on the development of aggregation and disaggregation methodologies to address the implications of modeling a multiscale problem at restricted spatial and temporal resolutions.

Barros, Ana Paula↗
DOE OSTI2025

Assessing modifications to the Abdul-Razzak and Ghan aerosol activation parameterization (version ARG2000) to improve simulated aerosol–cloud radiative effects in the UK Met Office Unified Model (UM version 13.0)

The representation of aerosol activation is a key source of uncertainty in global composition-climate model simulations of aerosol–cloud interactions. The Abdul-Razzak and Ghan (ARG) activation parameterization is used in several global and regional models that employ modal aerosol microphysics schemes. In this study, we investigate the ability of the ARG parameterization to reproduce simulations with a cloud parcel model and find its performance is sensitive to the geometric standard deviations (widths) of the lognormal aerosol modes. We recommend adjustments to three constant parameters in the ARG equations, which improve the performance of the parameterization for small mode widths and its ability to simulate activation in polluted conditions. For the accumulation mode width of 1.4 used in the Met Office Unified Model (UM), the modifications decrease the mean bias in the activated fraction of aerosols compared to a cloud parcel model from −6.6 % to +1.2 %. We implemented the improvements in the UM and compared simulated global cloud droplet concentrations with satellite observations. The simulated cloud radiative effect changes by −1.43 W m −2 (6 %) and aerosol indirect radiative forcing over the industrial period changes by −0.10 W m −2 (10 %).

Ghosh, Pratapaditya [Carnegie Mellon University, P↗
DOE OSTI2022

The Ice Particle and Aggregate Simulator (IPAS). Part III: Verification and Analysis of Ice–Aggregate and Aggregate–Aggregate Collection for Microphysical Parameterization

Abstract The Ice Particle and Aggregate Simulator (IPAS) is used to theoretically represent the aggregation process of ice crystals. Aggregates have a variety of formations based on initial ice particle size, shape, and falling orientation, all of which influence water phase partitioning. Aggregate dimensional properties and density changes are calculated for monomer–monomer (MON–MON), monomer–aggregate (MON–AGG), and aggregate–aggregate (AGG–AGG) collection to be used by ice-microphysical models for improvement in aggregation parameterizations. Aggregates are chosen from a database of 9 744 000 preformed combinations to be further collected (see Part II). AGG–AGG collection results in more extreme and a smaller range of aggregate aspect ratios than MON–AGG collection. A majority of aggregates are closer to prolate than oblate spheroids, regardless of collection type, except for quasi-horizontally oriented particles that have extreme aspect ratios to begin with. MON–AGG collection frequently results in an increase in density upon collection, whereas MON–MON and AGG–AGG collection almost always result in particle density decreases, with extreme reductions near 99% for MON–MON collection. MON–MON collection results in the greatest decreases in density but then quickly becomes unaffected by the addition of more monomers due to inherent size differences between monomers and aggregates. Finally, a holistic analysis to in situ observations of cloud particle images is presented. IPAS 2D aspect ratios surround a median value of 0.6 and closely follow that of previous studies while varying by no more than ≈12% on average from observed aggregates.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1978

Treatment of cloudiness in regional scale - Numerical weather prediction models

A numerical weather prediction model is considered in which cloud water and precipitation are explicitly predicted as functions of three space dimensions and time. Approximations in the thermodynamic and continuity equations are discussed in detail, as well as the cumulus parameterization and the cloud microphysics parameterization. An example of a real-data forecast indicates that very accurate quantitative precipitation and cloud cover forecasts are possible using initial observations from only the relatively sparse rawinsonde network in the U.S.

Kreitzberg, C. W.↗
DOE OSTI2020

On the Parameterization of Convective Downdrafts for Marine Stratocumulus Clouds

The role of nonlocal transport on the development and maintenance of marine stratocumulus (Sc) clouds in coarse-resolution models is investigated, with a special emphasis on the downdraft contribution. A new parameterization of cloud-top-triggered downdrafts is proposed and validated against large-eddy simulation (LES) for two Sc cases. The applied nonlocal mass-flux scheme is part of the stochastic multiplume eddy-diffusivity/mass-flux (EDMF) framework decomposing the turbulent transport into local and nonlocal contributions. The complementary local turbulent transport is represented with the Mellor–Yamada–Nakanishi–Niino (MYNN) scheme. This EDMF version has been implemented in the Weather Research and Forecasting (WRF) single-column model (SCM) and tested for three model versions: without mass flux, with updrafts only, and with both updrafts and downdrafts. In the LES, the downdraft and updraft contributions to the total heat and moisture transport are comparable and significant. The WRF SCM results show a good agreement between the parameterized downdraft turbulent transport and LES. While including updrafts greatly improves the modeling of Sc clouds over the simulation without mass flux, the addition of downdrafts is less significant, although it helps improve the moisture profile in the planetary boundary layer.

Wu, Elynn↗
DOE OSTI2020

A Machine Learning Assisted Development of a Model for the Populations of Convective and Stratiform Clouds

Abstract Traditional parameterizations of the interaction between convection and the environment have relied on an assumption that the slowly varying large‐scale environment is in statistical equilibrium with a large number of small and short‐lived convective clouds. They fail to capture nonequilibrium transitions such as the diurnal cycle and the formation of mesoscale convective systems as well as observed precipitation statistics and extremes. Informed by analysis of radar observations, cloud‐permitting model simulation, theory, and machine learning, this work presents a new stochastic cloud population dynamics model for characterizing the interactions between convective and stratiform clouds, with the goal of informing the representation of these interactions in global climate models. Fifteen wet seasons of precipitating cloud observations by a C‐band radar at Darwin, Australia are fed into a machine learning algorithm to obtain transition functions that close a set of coupled equations relating large‐scale forcing, mass flux, the convective cell size distribution, and the stratiform area. Under realistic large‐scale forcing, the derived transition functions show that, on the one hand, interactions with stratiform clouds act to dampen the variability in the size and number of convective cells and therefore in the convective mass flux. On the other, for a given convective area fraction, a larger number of smaller cells is more favorable for the growth of stratiform area than a smaller number of larger cells. The combination of these two factors gives rise to solutions with a few convective cells embedded in a large stratiform area, reminiscent of mesoscale convective systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Bayesian Approach for Statistical–Physical Bulk Parameterization of Rain Microphysics. Part I: Scheme Description

A novel framework is proposed for the bulk parameterization of rain microphysics: the Bayesian Observationally Constrained Statistical–Physical Scheme (BOSS). It is designed to facilitate direct constraint by observations using Bayesian inference. BOSS combines existing process-level microphysical knowledge with flexible process rate formulations and parameters constrained by observations within a Bayesian framework. Furthermore, using a raindrop size distribution (DSD) normalization method that relates DSD moments to one another via generalized power series, generalized multivariate power expressions are derived for the microphysical process rates as functions of a set of prognostic DSD moments. The scheme is flexible and can utilize any number and combination of prognostic moments and any number of terms in the process rate formulations. This means that both uncertainty in parameter values and structural uncertainty associated with the process rate formulations can be investigated systematically, which is not possible using traditional schemes. In this paper, BOSS is compared to two- and three-moment versions of a traditional bulk rain microphysics scheme (denoted as MORR). It is demonstrated that some process formulations in MORR are analytically equivalent to the generalized power expressions in BOSS using one or two terms, while others are not. BOSS is able to replicate the behavior of MORR in idealized one-dimensional rainshaft tests, but with a much more flexible and systematic design. Part II of this study describes the application of BOSS to derive rain microphysical process rates and posterior parameter distributions in Bayesian experiments using Markov chain Monte Carlo sampling constrained by synthetic observations.

58 GEOSCIENCES↗
DOE OSTI2025

Demonstrating Hierarchical System Development With the Common Community Physics Package Single‐Column Model: A Case Study Over the Southern Great Plains

This study demonstrates a specific application of the hierarchical system development (HSD) approach to investigate, analyze, and attribute model issues within the Unified Forecast System (UFS), with a focus on process isolation. By evaluating a non‐precipitating, shallow cumulus case at the Atmospheric Radiation Measurement Southern Great Plains site in the UFS global forecast against the observation, the investigation identifies a warmer and deeper daytime convective planetary boundary layer (PBL) and misrepresented nocturnal PBL transition. Hypothesis testing, which employs the Common Community Physics Package (CCPP) single‐column model (SCM) and uses the same physics as the UFS global model, confirms that these issues are attributed to the model physics and initialization. Specifically, misrepresented PBL processes are linked to problematic surface condition and a lack of cloud formation, which may stem from deficiencies in PBL and cloud microphysics parameterizations and their interactions. The UFS initial condition contributes to an earlier, excessively collapsed daytime convective boundary layer and a lack of decoupling between the stable boundary layer and residual layer late in the afternoon. This work introduces an avenue for the community to engage with the application of HSD, along with the CCPP and CCPP SCM, to understand the interplay of model physics, disentangle the roles of model components, as well as facilitate model and forecast improvement.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Simulated Precipitation Diurnal Variation With a Deep Convective Closure Subject to Shallow Convection in Community Atmosphere Model Version 5 Coupled With CLUBB

In order to improve the physical consistency between shallow and deep convection, we modify the deep convective closure in the Community Atmosphere Model version 5 (CAM5) coupled with a third-order turbulence closure parameterization (i.e., Cloud Layers Unified by Binormals; CLUBB). The revised closure reserves a portion of the total convective available potential energy for shallow convection via utilizing the heating and moistening profiles from CLUBB to distribute moisture and energy between shallow and deep convection. Simulations at two resolutions (i.e. 2° and 0.5°, respectively) are conducted to investigate the impacts of convective closure on the simulated precipitation diurnal variations. Results from low-resolution simulations show that the revised closure suppresses deep convection until the lower troposphere is sufficiently moistened by shallow convection, which improves the precipitation diurnal variation simulations compared to the default closure, with the precipitation diurnal peak over tropical lands delayed from 12LST to 19LST. The revised closure better simulates the diurnal variations for precipitation over the Asian monsoon region, such as the delayed precipitation onset, but still fails to well capture the nighttime peak for precipitation there. This deficiency is alleviated to some extent when applying the revised closure in highresolution simulations, but nighttime precipitation is still underestimated probably because key processes responsible for nighttime convection are missing. Altogether, our results indicate that establishing the consistency between shallow and deep convection is critical for the precipitation diurnal cycle simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A Model Intercomparison Study of Aerosol‐Cloud‐Turbulence Interactions in a Cloud Chamber: 1. Model Results

This study presents the first model intercomparison of aerosol‐cloud‐turbulence interactions in a controlled cloudy Rayleigh‐Bénard Convection chamber environment, utilizing the Pi Chamber at Michigan Technological University. We analyzed simulated cloud chamber‐averaged statistics of microphysics and thermodynamics in a warm‐phase, cloudy environment under steady‐state conditions at varying aerosol injection rates. Simulation results from seven distinct models (DNS, LES, and a 1D turbulence model) were compared. Our findings demonstrate that while all models qualitatively capture observed trends in droplet number concentration, mean radius, and droplet size distributions at both high and low aerosol injection rates, significant quantitative differences were observed. Notably, droplet number concentrations varied by over two orders of magnitude between models for the same injection rates, indicating sensitivities to the model treatments in droplet activation and removal and wall fluxes. Furthermore, inconsistencies in vertical relative humidity profiles and in achieving steady‐state liquid water content suggest the need for further investigation into the mechanisms driving these variations. Despite these discrepancies, the models generally reproduced consistent power‐law relationships between the microphysical variables. This model intercomparison underscores the importance of controlled cloud chamber experiments for validating and improving cloud microphysical parameterizations. Recommendations for future modeling studies are also highlighted, including constraining wall conditions and processes, investigating droplet/aerosol removal (including sidewall losses), and conducting simplified experiments to isolate specific processes contributing to model divergence and reduce model uncertainties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

How Snow Aggregate Ellipsoid Shape and Orientation Variability Affects Fall Speed and Self-Aggregation Rates

Snow aggregate shapes and orientations have long been known to exhibit substantial variability. Despite this observed variability, most weather and climate prediction models use fixed power-law functions that deterministically map particle size to mass and fall speed. As such, integrated quantities like precipitation and self-aggregation rates currently ignore nonlinear effects resulting from variation in shape and orientation for aggregates of the same size. This study therefore develops an analytic framework that couples an empirically based bivariate distribution of ellipsoid shapes to classical hydrodynamic theory so as to capture an appropriate dispersion of masses, projected areas, and fall speeds for an assumed size distribution. For a fixed aggregate size, shape variations produce approximately ±0.13 m s -1 standard deviation of fall speed which increases the mass flux fall speed dispersion by more than 100% over traditional microphysics models. This increased fall speed dispersion results predominantly from shape-induced mass dispersion whereas orientation and drag dispersion play a lesser role. Shape variations can increase mass- and reflectivity-weighted fall speeds by up to 60% of traditional models whereas self-aggregation rates can increase by a factor of 100 for very small slope parameters. This implies that aggregate shape variations effectively forestall the theorized onset of fall speed distribution narrowing and subsequent quenching of the aggregation process. As a result, it is likely that secondary ice formation is necessary to prevent an ever decreasing slope parameter. The mathematical theory presented in this study is used to develop simple correction factors for snow forecast and climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Radar-Based Bayesian Estimation of Ice Crystal Growth Parameters within a Microphysical Model

The potential for polarimetric Doppler radar measurements to improve predictions of ice microphysical processes within an idealized model–observational framework is examined. In an effort to more rigorously constrain ice growth processes (e.g., vapor deposition) with observations of natural clouds, a novel framework is developed to compare simulated and observed radar measurements, coupling a bulk adaptive-habit model of vapor growth to a polarimetric radar forward model. Bayesian inference on key microphysical model parameters is then used, via a Markov chain Monte Carlo sampler, to estimate the probability distribution of the model parameters. The statistical formalism of this method allows for robust estimates of the optimal parameter values, along with (non-Gaussian) estimates of their uncertainty. To demonstrate this framework, observations from Department of Energy radars in the Arctic during a case of pristine ice precipitation are used to constrain vapor deposition parameters in the adaptive habit model. The resulting parameter probability distributions provide physically plausible changes in ice particle density and aspect ratio during growth. A lack of direct constraint on the number concentration produces a range of possible mean particle sizes, with the mean size inversely correlated to number concentration. Consistency is found between the estimated inherent growth ratio and independent laboratory measurements, increasing confidence in the parameter PDFs and demonstrating the effectiveness of the radar measurements in constraining the parameters. Furthermore, the combined Doppler and polarimetric observations produce the highest-confidence estimates of the parameter PDFs, with the Doppler measurements providing a stronger constraint for this case.

54 ENVIRONMENTAL SCIENCES↗