SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electrocatalysts composed of single atoms or metal clusters dispersed over porous carbon support were prepared by a lithium-melt method. The new catalysts demonstrated high selectivity, high Faradic efficiency and low overpotential toward to the electrocatalytic reduction of carbon dioxide to chemicals.
Atomistic scale models were developed and coupled with experimental investigation to deliver a functional understanding of catalytic activity and selectivity in the conversion of ethanol to 1,3-butadiene over Ag/ZrO 2 /SiO 2 . A detailed evaluation of the structural and electronic properties of the resultant catalyst models led to the identification of critical active sites of the catalyst. More importantly, the extent of Ag dispersion on the SiO 2 support and relative proximity to ZrO 2 were found to vary with the oxidation state of Ag and local coordination environment (Ag-O SiO2 ) allowing for critical control of ethanol conversion towards butadiene or ethylene. Simulations revealed that less dispersed or clustered Ag contain predominantly Ag 0 charge state and promote conversion of ethanol to ethylene. The well-dispersed Ag/ZrO 2 /SiO 2 catalyst instead contain a larger fraction of cationic Ag δ+ , and predominantly promote ethanol dehydrogenation and subsequent production of butadiene. The theoretical insights drawn were validated and confirmed experimentally using TEM, XRD and reactivity measurements demonstrating the effect of Ag dispersion on the selectivity of ethanol conversion.
In this work, we present an investigation aimed at characterizing and understanding the synergistic interactions in encapsulated catalytic structures between the metal core (i.e., Pd) and oxide shell (i.e., TiO 2 , ZrO 2 , and CeO 2 ). Encapsulated catalysts were synthesized using a two-step procedure involving the initial colloidal synthesis of Pd nanoparticles (NPs) capped by various ligands and subsequent sol–gel encapsulation of the NPs with porous MO 2 (M = Ti, Zr, Ce) shells. The encapsulated catalytic systems displayed higher activity than the Pd/MO 2 supported structures due to unique physicochemical properties at the Pd–MO 2 interface. Pd@ZrO 2 exhibited the highest catalytic activity for CO oxidation. Results also suggested that the active sites in Pd encapsulated by an amorphous ZrO 2 shell structure were significantly more active than the crystalline oxide encapsulated structures at low temperatures. Furthermore, CO DRIFTS studies showed that Pd redispersion occurred under CO oxidation reaction conditions and as a function of the oxide shell composition, being observed in Pd@TiO 2 systems only, with potential formation of smaller NPs and oxide-supported Pd clusters after reaction. This investigation demonstrated that metal oxide composition and (in some cases) crystallinity play major roles in catalyst activity for encapsulated catalytic systems.
Single atoms of uranium supported on molybdenum sulfide surfaces (U@MoS 2 ) have been recently demonstrated to facilitate the hydrogen evolution reaction (HER) through electrocatalysis. Theoretical calculations have predicted uranium hydroxide moieties bound to edge-sulfur atoms of MoS 2 as a proposed transition state involved in the HER process. However, the isolation of relevant intermediates involved in this process remains a challenge, rendering mechanistic hypotheses unverified. The present work describes the isolation and characterization of a uranium-hydroxide intermediate on molybdenum sulfide surfaces using [(Cp* 3 Mo 3 S 4 )UCp*], a molecular model of a reduced uranium center supported at MoS 2 . Mechanistic investigations highlight the metalloligand cooperativity with uranium involved in the water activation pathway. The corresponding uranium-oxo analogue, [(Cp* 3 Mo 3 S 4 )Cp*U(═O)], was also accessed from the hydroxide cluster via hydrogen atom transfer and from [(Cp* 3 Mo 3 S 4 )UCp*] through an alternative direct oxygen atom transfer. These results provide an atomistic perspective on the reactivity of low-valent uranium at molybdenum sulfide surfaces toward water, modeling key intermediates associated with the HER of U@MoS 2 catalysts.
CO 2 hydrogenation, especially to methanol, is crucial to establishing sustainable closed-loop systems for carbon utilization. However, the difficulties of CO 2 activation at low temperatures and the ambiguity of structure–activity correlations are obstacles to reducing the energy consumption of the hydrogenation process. Here we report that molecularly defined Anderson PtMo 6 O 24 clusters, sited within a robust metal–organic framework, are catalytic for low-temperature CO 2 hydrogenation. The performance of the cluster showed no signs of decay in either its activity or methanol selectivity over 3,600 h at 180 °C. It also achieves a per-pass yield exceeding that of state-of-the-art heterogeneous catalysts under similar conditions. Combined in situ spectroscopy and density functional theory calculations demonstrated that CH 3 OH formation is dominated by the reverse water–gas shift and subsequent CO* hydrogenation pathway, while the HCOO* pathway may serve as a supplementary route. The well-defined cluster structure offers an ideal model for elucidating structure–activity correlations and opens exciting avenues for the rational design of high-activity, low-temperature catalysts for CO 2 hydrogenation.
Pd-based catalysts are widely used in the oxidation of CH 4 and have a significant impact on global warming. However, understanding their active sites remains controversial, because interconversion between Pd and PdO occurs consecutively during the reaction. Understanding the intrinsic active sites under reaction conditions is critical for developing highly active and selective catalysts. In this study, we demonstrated that partially oxidized palladium (PdO x ) on the surface plays an important role for CH 4 oxidation. Regardless of whether the initial state of Pd corresponds to oxides or metallic clusters, the topmost surface is PdO x , which is formed during CH4 oxidation. A quantitative analysis using CO titration, diffuse reflectance infrared Fourier-transform spectroscopy, X-ray diffraction, and scanning transmission electron microscopy demonstrated that a surface PdO layer was formed on top of the metallic Pd clusters during the CH 4 oxidation reaction. Furthermore, the time-on-stream test of CH 4 oxidation revealed that the presence of the PdO layer on top of the metallic Pd clusters improves the catalytic activity. Our periodic density functional theory (DFT) calculations with a PdO x slab and nanoparticle models aided the elucidation of the structure of the experimental PdO particles, as well as the experimental C-O bands. The DFT results also revealed the formation of a PdO layer on the metallic Pd clusters. This study helps achieve a fundamental understanding of the active sites of Pd and PdO for CH 4 oxidation and provides insights into the development of active and durable Pd-based catalysts through molecular-level design.
The electrons in electric-discharge CO2 lasers cause dissociation of some CO2 into O2 and CO, and attach themselves to electronegative molecules such as O2, forming negative O2 ions, as well as larger negative ion clusters by collisions with CO or other molecules. The decrease in CO2 concentration due to dissociation into CO and O2 will reduce the average repetitively pulsed or continuous wave laser power, even if no disruptive negative ion instabilities occur. Accordingly, it is the primary object of this invention to extend the lifetime of a catalyst used to combine the CO and O2 products formed in a laser discharge. A promising low-temperature catalyst for combining CO and O2 is platinum on tin oxide (Pt/SnO2). First, the catalyst is pretreated by a standard procedure. The pretreatment is considered complete when no measurable quantity of CO2 is given off by the catalyst. After this standard pretreatment, the catalyst is ready for its low-temperature use in the sealed, high-energy, pulsed CO2 laser. However, after about 3,000 minutes of operation, the activity of the catalyst begins to slowly diminish. When the catalyst experiences diminished activity during exposure to the circulating gas stream inside or external to the laser, the heated zone surrounding the catalyst is raised to a temperature between 100 and 400 C. A temperature of 225 C was experimentally found to provide an adequate temperature for reactivation. During this period, the catalyst is still exposed to the circulating gas inside or external to the laser. This constant heating and exposing the catalyst to the laser gas mixture is maintained for an hour. After heating and exposing for an appropriate amount of time, the heated zone around the catalyst is allowed to return to the nominal operating temperature of the CO2 laser. This temperature normally resides in the range of 23 to 100 C. Catalyst activity can be measured as the percentage conversion of CO to CO2. In the specific embodiment described above, the initial steady-state conversion percentage was 70 percent. After four days, this conversion percentage decreased to 67 percent. No decrease in activity is acceptable because the catalyst must maintain its activity for long periods of time. After being subjected to the reactivation process of the present invention, the conversion percentage rose to 77 percent. Such a reactivation not only returned the catalyst to its initial steady state but resulted in a 10-percent improvement over the initial steady state value.
Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C 3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. Here, this work designs isolated rhodium–cobalt (Rh–Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh 1 Co x clusters with different Rh–Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh–Co CN of 3, corresponding to an isolated Rh 1 Co 3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.
The electrochemical CO 2 reduction (eCO 2 R) offers a compelling route for converting CO 2 into value-added fuels and chemicals. Among CO 2 -derived products, methane (CH 4 ) occupies a distinct position, serving both as a key intermediate for emerging cascade electro-oxidation to oxygenates and as a strategically important extraterrestrial fuel that can be generated in situ from off-planet CO 2 resources. Although Cu-based catalysts capable of selectively producing CH 4 have been reported, they seldom sustain high selectivity at practically relevant current densities. Here, we created a single-step co-pyrolysis strategy toward generating and anchoring Cu sub-nanometer clusters (Cu SNC ) atop Cu-N x single-atom (SA) motifs embedded within N-doped carbon (NC), with controllable nanostructures through tuning of the synthesis parameters. Complementary spectroscopic analyses and density functional theory (DFT) calculations help reveal a structure−activity correlation that could guide the catalyst design. The Cu SNC @NC sample synthesized at 550 °C pyrolysis temperature (best described and modeled as Cu 3 -CuN 4 domains) represents the most effective combination of cluster size, metal-nitrogen coordination, and adsorption energetics needed to selectively promote CH 4 generation versus other eCO 2 R products. Incorporating pulsed electrolysis and hydrophobicity-modulated transport tuning at the triple-phase boundary (TPB) further enhanced CH 4 production achieving a partial CH 4 current density of ∼321 mA cm −2 , 53% Faradaic efficiency (FECH 4 ), and less than 4% combined FE for other eCO 2 R products, simplifying downstream CH 4 purification or upgrading. This work establishes generalizable principles for controlling Cu cluster atomicity and metal−nitrogen coordination, both of which are recognized determinants of CH 4 -efficient eCO 2 R.
Titanium oxide site requirements for the anchoring of catalytically active forms of dispersed vanadia species are investigated. Using a series of oxygen-modified titanium nitride materials, we systematically modify the available vanadia-anchoring moieties on the titanium-bearing support surface. This strategy in turn results in a very narrow size distribution of well-dispersed vanadia clusters anchored on the support. This synthesis technique ensures that only highly dispersed vanadia is present on the catalyst surface even at nominal monolayer coverages. A deeper insight into the catalytic behavior for ethanol partial oxidation of the active vanadia species is obtained by comparing intrinsic kinetic and thermodynamic parameters of kinetically relevant reaction steps (heat of ethanol adsorption, hydrogen abstraction activation energy, and the energetics of catalyst reoxidation). In conclusion, it is found that these parameters are dependent on the relative amount of oxygen in the titanium-bearing support and the resulting distribution of vanadia species, which validates the premise of a potential participation of lattice oxygen atoms of the titania support into the catalytic activity of active vanadia species.
Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Brønsted acidity, and high availability of active sites poise them as potent catalysts for oxidation reactions. Here, metal–organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, K a ) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, the) on POM encapsulation thermodynamics.
The solar water-splitting protein complex, photosystem II (PSII), catalyzes one of the most energetically demanding reactions in nature by using light energy to drive a catalyst capable of oxidizing water. The water oxidation reaction is catalyzed at the Mn 4 Ca-oxo cluster in the oxygen-evolving complex (OEC), which cycles through five light-driven S-state intermediates (S 0 –S 4 ). A detailed mechanism of the reaction remains elusive as it requires knowledge of the delivery and binding of substrate water in the higher S-state intermediates. In this paper, we use two-dimensional (2D) hyperfine sublevel correlation spectroscopy, in conjunction with quantum mechanics/molecular mechanics (QM/MM) and density functional theory (DFT), to probe the binding of the substrate analog, methanol, in the S 2 state of the D1-N87A variant of PSII from Synechocystis sp. PCC 6803. The results indicate that the size and specificity of the “narrow” channel is altered in D1-N87A PSII, allowing for the binding of deprotonated 13 C-labeled methanol at the Mn4(IV) ion of the catalytic cluster in the S 2 state. This has important implications on the mechanistic models for water oxidation in PSII.
Metal–support interaction plays a crucial role in governing the stability and activity of atomically dispersed platinum catalysts on ceria support. The migration and aggregation of platinum atoms during the catalytic reaction leads to the redistribution of active sites. In this study, by utilizing a multimodal characterization scheme, we observed the aggregation of platinum atoms at high temperatures under reverse water gas shift reaction conditions and the subsequent fragmentation of platinum clusters, forming “single atoms” upon cooling. Theoretical simulations of both effects uncovered the roles of carbon monoxide binding on perimeter Pt sites in the clusters and hydrogen coverage in the aggregation and fragmentation mechanisms. Finally, this study highlights the complex effects of adsorbate and supports interactions with metal sites in Pt/ceria catalysts that govern their structural transformations under in situ conditions.
We combine experimental and computational investigations to compare and understand catalytic arene alkenylation using the Pd(II) and Rh(I) precursors Pd(OAc) 2 and [(η 2 -C 2 H 4 ) 2 Rh(µ-OAc)] 2 with arene, olefin and Cu(II) carboxylate at elevated temperature (> 120 °C). Under specific conditions, previous computational and experimental efforts have identified heterotrimetallic cyclic PdCu 2 (η 2 -C 2 H 4 ) 3 (μ-OPiv) 6 and [(η 2 -C 2 H 4 ) 2 Rh(µ-OPiv) 2 ] 2 (µ-Cu) (OPiv = pivalate) species as likely active catalysts for these processes. Further studies of catalyst speciation suggest a complicated equilibrium between Cu(II)-containing complexes containing one Rh or Pd atom with complexes containing two Rh or Pd atoms. At 120 °C, Rh catalysis produces styrene > 20-fold more rapidly than Pd. Also, at 120 °C, Rh is ~98% selective for styrene formation while Pd is ~82% selective. Furthermore, our studies indicate that Pd catalysis has a higher predilection toward olefin functionalization to form undesired vinyl ester, while Rh catalysis is more selective for arene/olefin coupling. However, at elevated temperatures, Pd converts vinyl ester and arene to vinyl arene, which is proposed to occur through low valent Pd(0) clusters that are formed in situ. Regardless of arene functionality, the regioselectivity for alkenylation of mono-substituted arenes with the Rh catalyst gives an approximate 2:1 meta:para ratio with minimal ortho C–H activation. In contrast, Pd selectivity is significantly influenced by arene electronics with electron-rich arenes giving an approximate 1:2:2 ortho:meta:para ratio while the electron deficient (α,α,α)-trifluorotoluene gives a 3:1 meta:para ratio with minimal ortho functionalization. Kinetic intermolecular arene ethenylation competition experiments find that Rh reacts most rapidly with benzene, and the rate of mono-substituted arene alkenylation does not correlate with arene electronics. In contrast, with Pd catalysis, electron-rich arenes react more rapidly than benzene while electron-deficient arenes react less rapidly than benzene. These experimental findings, in combination with computational results, are consistent with the arene C–H activation step for Pd catalysis involving significant η 1 -arenium character due to Pd-mediated electrophilic aromatic substitution character. In contrast, the mechanism for Rh catalysis is not sensitive to arene substituent electronics, which we propose indicates less electrophilic aromatic substitution character for the Rh-mediated arene C–H activation.
A family of cobalt-oxo bis(cubane) complexes wherein each subunit is derived from the Co 4 O 4 cubane, a known water oxidation catalyst, was synthesized. Both 4,4′-bipyrdine and pyrazine were demonstrated to serve as viable bridging ligands. Through an analysis of their half-wave splitting potentials, it was determined that pyrazine-bridged bis(cubane)s exhibit inter-cubane electronic coupling, and that this coupling may be tuned through ligand substitution. Electrostatic contributions to the half-wave splitting potentials were evaluated and found to result in “non-conformist” behavior related to the ion-pairing ability of the electrolytes.
Direct solar-to-chemical conversion offers a compelling route to clean, dispatchable energy. Photosystem I (PSI), an evolutionarily optimized light-driven oxidoreductase, can be repurposed for solar-fuel production by coupling its photochemistry to catalytic interfaces. However, the molecular determinants that govern productive electron transfer to abiotic catalysts remain poorly understood. Here, we present molecular structures of active PSI-Pt nanoparticle (PtNP) biohybrids that reveal how protein architecture controls catalyst access, binding geometry, and photocatalytic efficiency. Removal of stromal subunits exposes the electron transfer chain and enables PtNP binding proximal to the F X cluster, demonstrating that steric occlusion limits access to native acceptor regions in PSI. In contrast, in trimeric PSI, PtNPs bind at multiple sites per monomer, but only a subset are positioned within electron transfer distance of terminal cofactors, resulting in a heterogeneous population of productive and nonproductive configurations. Structural analyses and molecular dynamics simulations define the interface topology, electrostatics, and cofactor-to-nanoparticle distances that govern catalyst binding and electron transfer. These results establish that catalytic inefficiency arises not only from intrinsic electron transfer constraints but also from the distribution of binding geometries imposed by the protein scaffold. Together, these findings provide a molecular framework linking protein structure to biohybrid function and define design principles for engineering PSI-based solar fuel systems and protein-nanomaterial interfaces for light-driven catalysis.
Pt-CeO 2 catalysts have been widely studied for the vehicle emission control. Designing novel CeO 2 based supports with improved physical-chemical properties has become a research hotspot to further promote the catalytic performance and stability of Pt-CeO 2 catalysts. In this work, through utilizing a unique, two-step incipient wetness impregnation (T-IWI) method for ceria-zirconia-alumina (CZA-T) support preparation, a Pt single site catalyst (Pt/CZA-T) with excellent thermal stability was synthesized. Higher oxidation activity and Oxygen storage capacity (OSC) were achieved on activated Pt/CZA-T, comparing to Pt catalysts on regular CeO 2 /Al 2 O 3 (Pt/CA) and one-step prepared CeZrO x /Al 2 O 3 (Pt/CZA). Via the modification of hydrophilic/hydrophobic properties of γ-Al 2 O 3 by this unique T-IWI method, finer Ce 0.9 Zr 0.1 O 2 particles with higher density of surface defects were formed on CZA-T, on which a higher Pt dispersion and stronger Pt-O-Ce interaction were achieved. Upon activation, smaller, well-dispersed Pt clusters on CZA-T were generated. It was concluded that the CO oxidation performance and OSC were highly related to the size of Pt clusters on different supports that we have developed. Finally, more Pt sites located at Pt cluster-CeZrO x interfaces, which were the real active sites, were responsible for the highest OSC function and CO oxidation activity of activated Pt/CZA-T catalyst.
Recent progress towards universal machine-learned interatomic potentials holds considerable promise for materials discovery. Yet the accuracy of these potentials for predicting phase stability may still be limited. In contrast, cluster expansions provide accurate phase stability predictions but are computationally demanding to parameterize from first principles, especially for structures of low dimension or with a large number of components, such as interfaces or multimetal catalysts. We overcome this trade-off via transfer learning. Using Bayesian inference, we incorporate prior statistical knowledge from machine-learned and physics-based potentials, enabling us to sample the most informative configurations and to efficiently fit first-principles cluster expansions. Furthermore, this algorithm is tested on Pt:Ni, showing robust convergence of the mixing energies as a function of sample size with reduced statistical fluctuations.