Ozonolysis of ''polymer-type'' material in coal, kerogen, and in the Orgueil meteorite - A preliminary report.
Hydrogen peroxide oxidation and ozonolysis of polymer type material in coal, kerogen and Orgueil meteorite
KEROGEN↗
SEARCH · Search NASA
Results for “coal”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Moessbauer spectroscopy of coal-related minerals
Comparison of iron 57 Mossbauer spectra of iron containing compounds and coal
Ulmer, J. D.↗
The remote sensing of air pollution from coal utilization
An investigation was made to determine the feasibility of applying earth resources data to the detection of air pollution, particularly pollution from coal burning. Efforts were also made to detect any damage caused by such pollution to vegetation growth and tree life. Results show that vegetative vigor even at low ambient concentrations was damaged and that Eastern white pine trees were severely damaged by the pollutants.
Harney, B. M.↗
Identification and Mapping of Coal Refuse Banks and Other Targets in the Anthracite Region
Identification and mapping of coal refuse banks and other targets in anthracite region of Pennsylvania
Borden, F. Y.↗
Application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry
The author has identified the following significant results. The most important result to date is the demonstration of the special value of repetitive ERTS-1 multiband coverage for detecting previously unknown fracture lineaments despite the presence of a deep glacial overburden. The Illinois Basin is largely covered with glacial drift and few rock outcrops are present. A contribution to the geological understanding of Illinois and Indiana has been made. Analysis of ERTS-1 imagery has provided useful information to the State of Indiana concerning the surface mined lands. The contrast between healthy vegetation and bare ground as imaged by Band 7 is sharp and substantial detail can be obtained concerning the extent of disturbed lands, associated water bodies, large haul roads, and extent of mined lands revegetation. Preliminary results of analysis suggest a reasonable correlation between image-detected fractures and mine roof fall accidents for a few areas investigated. ERTS-1 applications to surface mining operations appear probable, but further investigations are required. The likelihood of applying ERTS-1 derived fracture data to improve coal mine safety in the entire Illinois Basin is suggested from studies conducted in Indiana.
Wier, C. E.↗
Trace element analysis of coal by neutron activation
The irradiation, counting, and data reduction scheme is described for an analysis capability of 1000 samples per year. Up to 56 elements are reported on each sample. The precision and accuracy of the method are shown for 25 elements designated as hazardous by the Environmental Protection Agency (EPA). The interference corrections for selenium and ytterbium on mercury and ytterbium on selenium are described. The effect of bromine and antimony on the determination of arsenic is also mentioned. The use of factorial design techniques to evaluate interferences in the determination of mercury, selenium, and arsenic is shown. Some typical trace element results for coal, fly ash, and bottom ash are given.
Sheibley, D. W.↗
Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry
The author has identified the following significant results. The 70mm black and white infrared photography acquired in March 1973 at an approximate scale of 1:115,000 permits the identification of areas of mine subsidence not readily evident on other films. This is largely due to the high contrast rendition of water and land by this film and the excessive surface moisture conditions prevalent in the area at the time of photography. Subsided areas consist of shallow depressions which have impounded water. Patterns with a regularity indicative of the room and pillar configuration used in subsurface coal mining are evident.
Wier, C. E.↗
Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry
The author has identified the following significant results. Mined land reclamation analysis procedures developed within the Indiana portion of the Illinois Coal Basin were independently tested in Ohio utilizing 1:80,000 scale enlargements of ERTS-1 image 1029-15361-7 (dated August 21, 1972). An area in Belmont County was selected for analysis due to the extensive surface mining and the different degrees of reclamation occurring in this area. Contour mining in this area provided the opportunity to extend techniques developed for analysis of relatively flat mining areas in Indiana to areas of rolling topography in Ohio. The analysts had no previous experience in the area. Field investigations largely confirmed office analysis results although in a few areas estimates of vegetation percentages were found to be too high. In one area this error approximated 25%. These results suggest that systematic ERTS-1 analysis in combination with selective field sampling can provide reliable vegetation percentage estimates in excess of 25% accuracy with minimum equipment investment and training. The utility of ERTS-1 for practical and reasonably reliable update of mined lands information for groups with budget limitations is suggested. Many states can benefit from low cost updates using ERTS-1 imagery from public sources.
Wier, C. E.↗
Trace element analysis of coal by neutron activation.
The irradiation, counting, and data reduction scheme is described for an analysis capability of 1000 samples per year. Up to 56 elements are reported on each sample. The precision and accuracy of the method are shown for 25 elements designated as hazardous by the Environmental Protection Agency (EPA). The interference corrections for selenium and ytterbium on mercury and ytterbium on selenium are described. The effect of bromine and antimony on the determination of arsenic is also mentioned. The use of factorial design techniques to evaluate interferences in the determination of mercury, selenium, and arsenic is shown. Some typical trace element results for coal, fly ash, and bottom ash are given.
Sheibley, D. W.↗
Level, peculiarities and effects of coal mine noise on pit workers
There exists a correlation between noise intensity and spectrum and degree of hearing impairment in the different professional categories in the pit. Most affected are dross miners and drillers. In these, the first degree of hypoacusia sets in within the first five years of exposure. Deafness begins at a frequency of 4,000 Hz, but often enough (20%) at 2,000 Hz as well, progressively evolving through the classical stages if exposure to noise continues. In the coal bearing basins investigated, the noise level is, on the whole, 31.2%, but the conventional zone is not involved by more than 6.3%. Technological and medical measures are proposed for the purpose of avoiding these troubles in the future.
Darlea, I. G.↗
Relationship of roof falls in underground coal mines to fractures mapped on ERTS-1 imagery
ERTS imagery is of unique value for mapping of certain fractures that are not identifiable on aircraft imagery. Because color infrared and ERTS imagery complement each other both sources of data were used to map fractures in western Indiana and eastern Illinois. In the Kings Station Mine, Gibson County, Indiana, most roof falls reported had occurred in areas where mapped fractures were closely spaced and intersecting. Using this information as a basis for extrapolation, roof fall hazard maps were prepared for other mine sites. Various coal resources programs related to energy and environment also were conducted.
Wier, C. E.↗
Remote sensing of coal mine pollution in the upper Potomac River basin
A survey of remote sensing data pertinent to locating and monitoring sources of pollution resulting from surface and shaft mining operations was conducted in order to determine the various methods by which ERTS and aircraft remote sensing data can be used as a replacement for, or a supplement to traditional methods of monitoring coal mine pollution of the upper Potomac Basin. The gathering and analysis of representative samples of the raw and processed data obtained during the survey are described, along with plans to demonstrate and optimize the data collection processes.
Source record↗
Development of remote sensing techniques for assessment of hydrologic conditions in coal mining regions of Appalachia
In December of 1974 the John F. Kennedy Space Center, NASA, and the Water Resources Division, United States Geological Survey (USGS), acquired photographic, thermal, and multispectral data over the Cumberland region of eastern Tennessee. This data was effectively used to delineate ground water sources, and surface water runoff into river systems in the Cumberlands. The data, coupled with an overview of the area from the Earth Resources Technology Satellite (ERTS), could be useful in determining hydrologic conditions in coal mining regions of the Appalachians.
Pope, C. D.↗
Surfactant-assisted coal liquefaction
Improved process of coal liquefaction utilizing nonaqueous surfactant has increased oil yield from 50 to about 80%. Asphaltene molecule formation of colloid particles is prevented by surfactant. Separated molecules present more surface area for hydrogenation reaction. Lower requirements for temperature, pressure, and hydrogen lead to reduction in capital and operation costs.
Hsu, G. C.↗
Production of hydrogen by direct gasification of coal with steam using nuclear heat
Problems related to: (1) high helium outlet temperature of the reactor, and (2) gas generator design used in hydrogen production are studied. Special attention was given to the use of Oklahoma coal in the gasification process. Plant performance, operation, and environmental considerations are covered.
Source record↗
Sulfidation of 310 stainless steel at sulfur potentials encountered in coal conversion systems
The sulfidation of SAE 310 stainless steel was carried out in gas mixtures of hydrogen and hydrogen sulfide over a range of sulfur potentials anticipated in advanced coal gasification processes. The kinetics, composition, and morphology of sulfide scale formation were studied at a fixed temperature of 1,065 K over a range of sulfur potentials from .00015 Nm to the -2nd power to 900 Nm to the -2nd power. At all sulfur potentials investigated, the sulfide scales were found to be multilayered. The relative thickness of the individual layers as well as the composition was found to depend on the sulfur potential. The reaction was found to obey the parabolic rate law after an initial transient period. Considerably longer transient periods were found to be due to unsteady state conditions resulting from compositional variations in the spinel layer. The sulfur pressure dependence on the parabolic rate constant was found to best fit the equation K sub p equals const. (P sub S2) to the 1/nth power, where n equals 3.7. The growth of the outer layers was found to be primarily due to the diffusion of metal ions, iron being the predominant species. The inner layer growth was due to the dissociation of the primary product at the alloy scale interface and depended on the activity of chromium.
Rao, D. B.↗
Low-temperature coal desulfurization
Economical, low-temperature chlorinolysis converts sulfur to water-soluble sulfates. Sulfates are removed by washing. Subsequent steps dry coal and remove chlorine. Chlorine and solvents can be reused.
Ganguli, P. S.↗
Screw-extruded coal
Versatile screw-extrusion technique makes coal more combustible and aids in desulfurization.
Ryason, P. R.↗