Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Scalable, low-cost ink-based processing of high-performance silver selenide thermoelectrics

The growing global energy demand and its accelerating contribution to climate change emphasize the urgent need for sustainable energy conversion/harvesting technologies. Thermoelectric (TE) devices offer a compelling route to directly convert waste heat into electricity and enable solid-state cooling without moving parts or harmful refrigerants. Achieving their full potential requires not only higher TE performance (zT) but also scalable, low-cost manufacturing processes. Here, we introduce a transformative ink-based processing approach for scalable manufacturing of high-performance silver selenide-based TE materials and devices. Using a simple, high-throughput ink-mixing and blade coating strategy, our Ag 2 Se-based materials under the optimized composition and processing conditions yield an ultrahigh room-temperature power factor of 2.8 mW m −1 K −2 , over 100% higher than baseline samples and a reproducible figure of merit zT of 1 at room temperature. A thermoelectric generator (TEG) achieves a very competitive power density of 112 mW cm −2 at a 90 °C temperature difference between the hot and cold sides of the device, which is among the highest reported for silver selenide-based TE devices to date. This facile, scalable ink-based processing establishes a practical pathway toward industrial-scale manufacturing and widespread adoption of thermoelectric devices, advancing sustainable energy technologies.

Bappy, Md. Omarsany [University of Notre Dame, IN ↗

All-solid-state proton battery using gel polymer electrolyte

A proton conducting gel polymer electrolyte system; PMMA+NH{sub 4}SCN+EC/PC, has been prepared. The highest ionic conductivity obtained from the system is 2.5 × 10−4 S cm{sup −1}. The optimized composition of the gel electrolyte has been used to fabricate a proton battery with Zn/ZnSO{sub 4}⋅7H{sub 2}O anode and MnO{sub 2} cathode. The open circuit voltage of the battery is 1.4 V and the highest energy density is 5.7 W h kg−1 for low current drain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density functional theory study of the influence of segregation of S or Fe impurities on electromigration in nano-grained copper interconnects

The reliability of the circuits in the modern microelectronic devices remains, during last decades, one of the key topics in research and gains an attention for improving the promising candidates for conductors. Improvement of materials for such applications can be obtained by both electronic and compositional optimization. Ab initio calculations using full potential linearized augmented plane wave method in density functional theory are applied to explain the reduction in electromigration effect in the vicinity of grain boundaries (GB) in nano-structured Cu due to the segregation of some additives to the GB. Several possible mechanisms are considered. It is demonstrated that S atoms segregated to GB of nano-structured Cu lead to the growth of effective mass of the electrons. This decreases the mobility of electrons in external electric field, and, correspondingly, the momentum that they may transfer to atoms in collisions. Fe atoms segregated to GB of Cu create new empty states at the top of the valance band. These non-occupied states may stimulate the current of holes when external electric field is applied to the system, creating the “hole wind” in the direction opposite to the current of electrons. Such “hole wind” will compensate the forces generated by the electron current and therefore will reduce the total momentum transfer between charge carriers and atoms. The calculated electron density maps show that S and Fe segregating to Cu GB increases the strength of covalent bonds reducing the diffusion of Cu atoms in the vicinity of GB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AGES: Automated Gas Environment System for in situ neutron powder diffraction

High fluxes available at modern neutron and synchrotron sources have opened up a wide variety of in situ and operando studies of real processes using scattering techniques. This has allowed the user community to follow chemistry in the beam, which often requires high temperatures, gas flow, etc. In this paper, we describe an integrated gas handling system for the general-purpose powder diffraction beamline Powgen at the Spallation Neutron Source. The Automated Gas Environment System (AGES) allows control of both gas flow and temperature (room temperature to 850 °C), while measuring the partial pressure of oxygen and following the effluent gas by mass spectrometry, concurrent with neutron powder diffraction, in order to follow the structural evolution of materials under these conditions. The versatility of AGES is illustrated by two examples of experiments conducted with the system. In solid oxide fuel cell electrode materials, oxygen transport pathways in double perovskites PrBaCo 2 O 5+δ and NdBaCo 2 O 5+δ were elucidated by neutron diffraction measurements under atmosphere with oxygen partial pressures (pO 2 ) of 10 –1 to 10 –4 (achieved using mixtures of nitrogen and oxygen) and temperatures from 575 to 850 °C. In another example, the potential oxygen storage material La 1–x Sr x FeO 3 was measured under alternating flows of 15% CH 4 in N 2 and air (20% O 2 in N 2 ) at temperatures from 135 to 835 °C. As a result, from the oxygen stoichiometry, the optimal composition for oxygen storage was determined.

47 OTHER INSTRUMENTATION↗

Theoretical search for possible Li–Ni–B crystal structures using an adaptive genetic algorithm

The structural diversity of rare-earth and transition metal borides indicates that alkali-transition metal borides (A-T-B) show tremendous promise in exhibiting a variety of crystal structures with different dimensionalities of T-B frameworks. On the other hand, the A-T-B ternary systems are severely underexplored because of the synthetic challenges associated with their preparation. Accurate and efficient computational predictions of low-energy stable and metastable phases can identify the optimal compositions of the hypothetical compounds in the A-T-B systems to guide the synthesis. As such, in this work, we have computationally discovered several new phases in the Li–Ni–B ternary system. The newly discovered LiNiB, Li 2 Ni 3 B, and Li 2 NiB phases expand the existing theoretical database, and the convex-hull surface of Li–Ni–B has been re-constructed. The lowest energy structure of the LiNiB compound has been found by an adaptive genetic algorithm with layered motif, which matches with the experimentally determined structure. According to our electrochemical calculations, LiNiB and another predicted layered Li 2 NiB compounds have great potential as anode materials for lithium batteries. The Li 2 Ni 3 B compound with the space group P4 3 32 was predicted to crystallize in a cubic structure composed of distorted octahedral units of BNi 6 , which is isostructural to two noncentrosymmetric superconductors Li 2 Pd 3 B and Li 2 Pt 3 B. While we were unable to experimentally confirm the Li 2 Ni 3 B compound utilizing the hydride synthetic route, attempts to synthesize this compound by alternate methods remain highly desirable, considering its potential superconducting properties.

36 MATERIALS SCIENCE↗

Anomalous thermodynamic properties of quantum critical superconductors

Recent high-precision measurements employing different experimental techniques have unveiled an anomalous peak in the doping dependence of the London penetration depth which is accompanied by anomalies in the heat capacity in iron-pnictide superconductors at the optimal composition associated with the hidden antiferromagnetic quantum critical point. Here, we argue that finite temperature effects can be a cause of observed features. Specifically we show that quantum critical magnetic fluctuations under superconducting dome can give rise to a nodal-like temperature dependence of both specific heat and magnetic penetration depth in a fully gapped superconductor. In the presence of line nodes in the superconducting gap fluctuations can lead to the significant renormalization of the relative slope of T-linear penetration depth which is steepest at the quantum critical point. The results we obtain are general and can be applied beyond the model we use.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamic properties of nodal superconductors close to a magnetic quantum critical point

In this work we study thermodynamic manifestations of the quantum criticality in multiband unconventional superconductors. As a guiding example we consider the scenario of magnetic quantum critical point in the model that captures superconductivity coexistence with the spin-density wave. We show that in situations when the superconducting order parameter has incidental nodes at isolated points, quantum magnetic fluctuations lead to the renormalization of the relative 𝑇-linear slope of the London penetration depth. This leads to the nonmonotonic dependence of the penetration depth as a function of doping and the concomitant peak structure across the quantum critical point. In addition, we determine contribution of magnetic fluctuations to the specific heat at the onset of the coexistence phase. Furthermore, our theoretical analysis is corroborated by making a comparison of our results with the recent experimental data from the low-temperature thermodynamic measurements at optimal composition in BaFe 2 (As 1-x P x ) 2 .

36 MATERIALS SCIENCE↗

Autonomous Cyber Defense Against Dynamic Multi-strategy Infrastructural DDoS Attacks

Dynamic Infrastructural Distributed Denial of Service (I-DDoS) attacks constantly change attack vectors to congest core backhaul links and disrupt critical network availability while evading end-system defenses. To effectively counter these highly dynamic attacks, defense mechanisms need to exhibit adaptive decision strategies for real-time mitigation. This paper presents a novel Autonomous DDoS Defense framework that employs model-based reinforcement agents. The framework continuously learns attack strategies, predicts attack actions, and dynamically determines the optimal composition of defense tactics such as filtering, limiting, and rerouting for flow diversion. Our contributions include extending the underlying formulation of the Markov Decision Process (MDP) to address simultaneous DDoS attack and defense behavior, and accounting for environmental uncertainties. We also propose a fine-grained action mitigation approach robust to classification inaccuracies in Intrusion Detection Systems (IDS). Additionally, our reinforcement learning model demonstrates resilience against evasion and deceptive attacks. Evaluation experiments using real-world and simulated DDoS traces demonstrate that our autonomous defense framework ensures the delivery of approximately 96 - 98% of benign traffic despite the diverse range of attack strategies.

Dutta, Ashutosh↗

Phase stability, electronic structures, and superconductivity properties of the BaPb 1 -x Bi x O 3 and Ba 1 -x K x BiO 3 perovskites

With extensive first-principles calculations, we investigate the phase stability,electronic structures, and superconductivity properties of the BaPb 1 -x Bi x O 3 (BPBO) and Ba 1 -x K x BiO 3 (BKBO) perovskites with the cubic (C), tetragonal (T), and orthorhombic (O) phases. Our calculations show that the tetragonal superconducting phases of both perovskites are metastable. However, the orthorhombicphase of the BPBO perovskite in the superconductivity region is only slightly more stable than the tetragonal phase. The small energy difference between the T and O phases and the discontinuous T-to-O phase transition account for the experimentally observed coexistence of the T and O phases. On the other hand, the BKBO perovskite involves a large energy difference between the T and O phases,which induces a low equilibrium temperature of the discontinuous T-to-O phase transition, in agreement with the experimental observation that the tetragonal BKBO is maintained down to low temperatures. Moreover, the electronic structures of both BPBO and BKBO superconductors show a flat band near the Fermi level, which is favorable for superconductivity. Furthermore, we find that the longer the total length of the flat band segment is, the higher the critical temperature of the BPBO or BKBO perovskite is. This key finding could be generalized straightforwardly to other unconventional superconductors and can be used to design and find optimal composition with maximum Tc for new unconventional superconductors.

36 MATERIALS SCIENCE↗

Machine learning-driven design and self-sensing capabilities of automotive bumper lattices for adaptive impact response

We present a novel approach to design an automotive bumper energy absorber using carbon fiber reinforced polymer composites, optimized to meet conflicting performance requirements for two distinct impact scenarios. The design must satisfy both a low-speed (2.5 mph) pendulum intrusion test, simulating vehicle-to-vehicle collisions, and a high-speed (25 mph) leg flexion test, replicating pedestrian impacts. These tests demand opposing deformation characteristics: high flexibility (deformation < 85 mm) for the former and high stiffness (deformation < 22 mm) for the latter. To address these contradictory requirements, we developed a machine learning (ML) framework for inverse optimization of lattice designs and material selection. Unlike traditional iterative design processes, our ML model directly outputs optimal design parameters and material choices based on target performance inputs. The energy absorber was fabricated using advanced additive manufacturing techniques, including extrusion deposition and digital light processing. The integration of carbon fibers provides multifunctionality to the bumper structure, enabling self-sensing capabilities through changes in electrical resistivity under compression. This electrical response demonstrates high repeatability under multiple cycles at 2% compression and exhibits distinct signatures during crack formation under high deformation. This research offers adaptive performance through innovative design methodologies and smart material integration. The approach has potential applications in various fields requiring adaptive energy absorption and real-time structural health monitoring.

Chawla, Komal [ORNL] (ORCID:0000000190327565)↗

Effect of surfactant excess on the stability of low-polarity ferrofluids probed by small-angle neutron scattering

The structures of ferrofluids (FFs) based on nonpolar solvent decahydronaphthalene, stabilized by saturated monocarboxylic acids with hydrocarbon chains of different lengths, C16 (palmitic acid) and ?12 (lauric acid), with an excess of acid molecules, have been studied by small-angle neutron scattering. It is found that the addition of acid to an initially stable system with optimal composition leads to more significant structural changes (related to aggregation) than those observed previously for this class of FFs. A comparison of the influence of monocarboxylic acids on the stability of nonpolar FFs suggests that the enhancement of aggregation is much more pronounced in the case of palmitic acid excess. This fact confirms the conclusion of previous studies, according to which an increase in the hydrocarbon chain length in a saturated acid reduces the efficiency of the corresponding FF stabilization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of GaN/AlN/InAlN heterostructures for HEMTs in horizontal MOCVD reactors with different designs

The epitaxial growth of InAlN layers and GaN/AlN/InAlN heterostructures for HEMTs in growth systems with horizontal reactors of the sizes 1 × 2', 3 × 2', and 6 × 2' is investigated. Studies of the structural properties of the grown InAlN layers and electrophysical parameters of the GaN/AlN/InAlN heterostructures show that the optimal quality of epitaxial growth is attained upon a compromise between the growth conditions for InGaN and AlGaN. A comparison of the epitaxial growth in different reactors shows that optimal conditions are realized in small-scale reactors which make possible the suppression of parasitic reactions in the gas phase. In addition, the size of the reactor should be sufficient to provide highly homogeneous heterostructure parameters over area for the subsequent fabrication of devices. The optimal compositions and thicknesses of the InAlN layer for attaining the highest conductance in GaN/AlN/InAlN transistor heterostructures.

36 MATERIALS SCIENCE↗

Design of crack-free laser additive manufactured Inconel 939 alloy driven by computational thermodynamics method

Abstract This paper examined the effect of Si addition on the cracking resistance of Inconel 939 alloy after laser additive manufacturing (AM) process. With the help of CALculation of PHAse Diagrams (CALPHAD) software Thermo-Calc, the amounts of specific elements (C, B, and Zr) in liquid phase during solidification, cracking susceptibility coefficients (CSC) and cracking criterion based on $$\left| {{\text{d}}T/{\text{d}}f_{{\text{s}}}^{1/2} } \right|$$ d T / d f s 1 / 2 values ( T : solidification temperature, f s : mass fraction of solid during solidification) were evaluated as the indicators for composition optimization. It was found that CSC together with $$\left| {{\text{d}}T/{\text{d}}f_{{\text{s}}}^{1/2} } \right|$$ d T / d f s 1 / 2 values provided a better prediction for cracking resistance. Graphical abstract

Zeng, Congyuan (ORCID:0000000214764277)↗

Development and Pilot Manufacture of Pseudo-Electric Double Layer Capacitors

Binghamton University carried out basic studies on thermal characteristics of the current ELDC design and characterization of current active and conductive carbon materials used to fabricate ELDC and p-ELDC. Multi physics approach was take for thermal modeling to understand the temperature distribution of an individual cell as well as multi-cell systems, which is an important factor to the reliability of ELDC?s and p-ELDC?s. Structure and properties were characterized for various raw active carbon materials which can be used as electrode to look into potential cost reduction opportunity without degrading the performance. BU team also performed experiments for compositional optimization studies for active carbon, conductive carbon, and binder formulation. A few laboratory instruments were installed for this project at BU. These instruments will continued to be used to carry out further research and development tasks relevant to ELDC and p-ELDC. Project subawardee, Ioxus, Inc., successfully created, enhanced, and then generated a product line of hybrid capacitors which now range in size from 220 Farads (F) to 1000F. These products have been proven to work as the primary energy storage method for LED lighting applications, and two significant commercial applications are evaluating these devices for use. Both of these applications will be used in LED lighting, which replaces traditional batteries and allows for a very fast charge and a high cycle life, over a wide temperature range. This will lead to a significant reduction of waste that ends up in landfills. These products are 70% recyclable, with a 10 year life. In one both applications, it is expected that the hybrid capacitor will power the LED lights for the life of the product, which would have required at least 10 battery changes.

25 ENERGY STORAGE↗

Thermodynamic and Kinetic Modeling of Advanced Nuclear Fuels (Final Report of the LDRD-ER 10-ERD-059)

This project enhanced our theoretical capabilities geared towards establishing the basic science of a high-throughput protocol for the development of advanced nuclear fuel that should couple modern computational materials modeling and simulation tools, fabrication and characterization capabilities, and targeted high throughput performance testing experiments. The successful conclusion of this ER project allowed us to upgrade state-of-the-art modeling codes, and apply these modeling tools to ab initio energetics and thermodynamic assessments of phase diagrams of various mixtures of actinide alloys, propose a tool for optimizing composition of complex alloys for specific properties, predict diffusion behavior in diffusion couples made of actinide and transition metals, include one new equation in the LLNL phase-field AMPE code, and predict microstructure evolution during alloy coring. In FY11, despite limited funding, the team also initiated an experimental activity, with collaboration from Texas A&M University by preparing samples of nuclear fuels in bulk forms and for diffusion couple studies and metallic matrices, and performing preliminary characterization.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of advanced manufacturing technologies for low cost hydrogen storage vessels

The U.S. Department of Energy (DOE) defined a need for low-cost gaseous hydrogen storage vessels at 700 bar to support cost goals aimed at 500,000 units per year. Existing filament winding processes produce a pressure vessel that is structurally inefficient, requiring more carbon fiber for manufacturing reasons, than would otherwise be necessary. Carbon fiber is the greatest cost driver in building a hydrogen pressure vessel. The objective of this project is to develop new methods for manufacturing Type IV pressure vessels for hydrogen storage with the purpose of lowering the overall product cost through an innovative hybrid process of optimizing composite usage by combining traditional filament winding (FW) and advanced fiber placement (AFP) techniques. A numbers of vessels were manufactured in this project. The latest vessel design passed all the critical tests on the hybrid design per European Commission (EC) 79-2009 standard except the extreme temperature cycle test. The tests passed include burst test, cycle test, accelerated stress rupture test and drop test. It was discovered the location where AFP and FW overlap for load transfer could be weakened during hydraulic cycling at 85°C. To design a vessel that passed these tests, the in-house modeling software was updated to add capability to start and stop fiber layers to simulate the AFP process. The original in-house software was developed for filament winding only. Alternative fiber was also investigated in this project, but the added mass impacted the vessel cost negatively due to the lower performance from the alternative fiber. Overall the project was a success to show the hybrid design is a viable solution to reduce fiber usage, thus driving down the cost of fuel storage vessels. Based on DOE’s baseline vessel size of 147.3L and 91kg, the 129L vessel (scaled to DOE baseline) in this project shows a 32% composite savings and 20% cost savings when comparing Vessel 15 hybrid design and the Quantum baseline all filament wound vessel. Due to project timing, there was no additional time available to fine tune the design to improve the load transfer between AFP and FW. Further design modifications will likely help pass the extreme temperature cycle test, the remaining test that is critical to the hybrid design.

08 HYDROGEN↗

Development of Cost-Competitive Advanced Thermoelectric Generators for Direct Conversion of Vehicle Waste Heat into Useful Electrical Power

General Motors LLC (GM) proposed a project to develop a cost-effective thermoelectric generator (TEG) that is fully integrated into a GM production light-duty vehicle. The project goal was to reduce automotive energy consumption and CO 2 emissions by generating usable electricity from exhaust gas waste heat. The project objectives were to overcome the major obstacles to TEG commercialization and demonstrate 5% fuel economy improvement over the US06 drive cycle. We investigated electrical and thermal management strategies that included: (1) reducing electrical accessory load on the alternator using thermoelectric (TE) generated power; (2) shifting engine-driven accessories to electrical drive to raise the electrical accessory load consumption; (3) attempting to use the excess electrical power for something other than the vehicle electrical load e.g., propulsion (optimal for hybrids); and (4) implementing fast engine/transmission warm-up during cold-start. We developed a TEG system and all vehicle controls and electrical systems for full vehicle integration. The TEG system was modeled and analyzed for performance and cost. Heat exchangers and thermal interfaces between heat exchangers and TE modules were optimized for TE performance. Other objectives of the project were to (1) further optimize compositions and processing parameters for TE materials, (2) develop suitable diffusion barriers, interfaces electrical interconnections, and thermal contacts within TE modules, (3) implement adequate protection of TE materials and modules from degradation during operation, and (4) develop manufacturing and assembly processes for large scale production of TE materials and components that include scale-up plans for the production of 100,000 TEG units per year.

33 ADVANCED PROPULSION SYSTEMS↗

Understanding the solubility of metal salts and supporting electrolytes in Deep Eutectic Solvents [Slides]

Our objective is to determine how alterations in these parameters affect solubility in order to identify the optimal conditions for Zirconium electrodeposition. Create a variety of Deep Eutectic Solvents by combining different combinations and molar ratios of both hydrogen bond donors and hydrogen bond acceptors. Investigate the solubility of different Zirconium metal sources and supporting electrolytes individually, as well as in combination of both. Analyze various parameter conditions including temperature, pH, and conductivity. Determine the optimal composition and parameter setup for Zirconium electrodeposition. Obtain Zirconium coating through various methods and parameter adjustments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗